Message: The security of Windows service cannot be started

Similar Questions

• The EMP process Manager service cannot be started

  Hi I have installed EMP, planning and essbase, now when I try to start the EMP process Manager service it is said that the service has started and has stopped because some services stop if they have nothing to do.
  the services that are running on my system considering essbase space work and shared services.
  I'm relatively new to EMP and I'm just starting to use it, including at - it a particular order to start the services of EMP
  Help, please
  Thanks in advance

  The RDBMS user doesn't have sufficient rights.

  Connect as SYS (DBA) and run this script and then re-create the tables (database configuration) using config utility:

  CREATE THE USER EPMREP
  IDENTIFIED BY EPMREP
  DEFAULT TABLESPACE USERS
  TEMPORARY TEMP TABLESPACE
  DEFAULT PROFILE
  RELEASE OF ACCOUNT;
  -1 role for EPMREP
  GRANT CONNECT TO EPMREP;
  ALTER USER EPMREP ROLE DEFAULT ALL;
  -12 system to EPMREP privileges
  GRANT CREATE SYNONYM OF EPMREP;
  GRANT ALTER SESSION TO EPMREP.
  GRANT CREATE VIEW TO EPMREP;
  GRANT CREATE SESSION EPMREP;
  GRANT CREATE SEQUENCE TO EPMREP;
  GRANT CREATE PROCEDURE EPMREP;
  GRANT ALTER USER TO EPMREP;
  GRANT CREATE TRIGGER TO EPMREP;
  GRANT CREATE TABLE EPMREP;
  GRANT SELECT ANY DICTIONARY OF EPMREP;
  GRANT CREATE TYPE EPMREP;
  GRANT ALTER SYSTEM FOR EPMREP;
  -should be removed after Installation of the EMP
  -REVOKE ALTER SYSTEM FOR EPMREP;
  -1 contingent of Tablespace to EPMREP
  ALTER USER EPMREP QUOTA UNLIMITED ON USERS;

  HTH-
  Jasmine.

• The process of Windows Service Host: stop start update failure

  Running 32-bit Vista Home Premium SP2

  Description
  A Windows Update was not installing correctly. Send the following information to Microsoft can help improve the software.

  Signature of the problem
  Problem event name: WindowsUpdateFailure
  ClientVersion: 7.4.7600.226
  Win32HResult: 800f0816
  UpdateId: 4585715C-92BD-4D61-9F64-88AD70A7936D
  Scenario: install
  SourceId: 101
  Environment: unmanaged
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  Additional information about the problem
  Bucket ID: 1563453098

  Searched for fix and it could not find a. When I put on, I must go through a restoration of the system to an earlier point. At this point, the error says "a patch has stopped windows to start successfully. I have not run any firewall / anti virus other than the defender and Security Essentials.

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll Security Center, click...
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say this, do a RIGHT click on Security Center > in the new window, make the necessary changes...
  the startup type, click on the pointer, and then select Automatic (delayed start)
  the service status, click start
  Click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Message: "the Security Center service cannot be started. I am running Vista, fully up to date with AntiVirus & Anti Malware, & others. Unable to change the center of security of people with DISABILITIES.

  Message: "the Security Center service cannot be started. I am running Vista, completely up-to-date with Avira AntiVirus, Malwarebytes - Anti-Malware, MS/scans of Windows Security Center (for example MS Fix It programs Center), etc. No Malware has been found. Despite me trying to re - set the Security Center using start > Services > SecurityCenter > change to "Automatic (delayed start)" people with disabilities > start > output the re-creation is not the owner and I'm back with no security - with the same message as the original. I spent hours trying to deal with this. There is no known new applications/programs, and the problem started about 3 days ago. Help requested - thanks. JohnG - Sydney

  Hello

  ·         Are you can change the Security Center service parameter by using a different user account on the computer?

  I suggest you to make sure that Windows Defender is running. Follow the below mentioned articles and check.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: If the method above is not enough, then I suggest refer you the link try the steps and check if that helps:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

   

  Note:

  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  If you are using the original computer and the new laptop image, you will need to purchase a product key to activate the copy of windows installed on the laptop.

  Hope the information is useful.

• Windows backup error the service cannot be started, either because it is disabled or because it has not enabled 0 x 80070422

  I tried to understand this and have failed so far.

  Using the Control Panel, system and security, backup and recovery. Click the backup set,

  Pop up - select where you want to save your backup. I select the 4 TB drive that I just

  put in my system (and the recommended player). I click Next, and then select Allow me

  Choose and click Next. The next window - what you want to backup? Data files are already

  selected by default, and then I select the disc Local (c), include an image of disk system: EFI system

  (C) partition is already checked by default. Click on next, the next window - see your back to top

  settings, click on save settings and run the backup and that's what I have.

  The service cannot be started, either because it is disabled or because it has not enabled

  associated devices, (0 x 80070422

  I checked the services which apply to Windows backup and tried the auto configuration instead of

  Manual.

  I tried this search on the Internet and so far all I've found is not

  fixing the problem.

  Original title: set up backup Windows does not.

  Thank you for your help. I fixed the problem I had. It was caused by the settings in the

  Samsung magician optimization settings. Recently, I had put in a Samsung SSD EVO 850.

• The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him. (0 x 80070422) attempt to run the Windows backup utility.

  I get this message every time I try to run the Windows backup utility.  All the services are rundning according to the instructions of Microsoft experts on the same issue.

  Original title: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him. (0 x 80070422)

  Hi Charles,

  Welcome to the community Microsoft and thanks for posting the question. I'll certainly try and help you perform the backup.

  Until we start could you give us some more information?

  1. Since when are you facing the issue?

  2. you have any anti-virus installed on the computer program?

  3. What are the troubleshooting steps correct you have taken to correct the problem?

  4. are you aware of any changes made to the computer before the show?

  I suggest you to re check the service as long as this error usually occurs if one of the services required for the backup Windows for work is disabled or has not started.

  To check the services, click Start, in the Start Search bar type services , and then press enter.

  Please check that the following services are enabled:

  -"Remote Procedure Call" (RPCSS) must be active, Automatic.

  'COM + Event System"(System events) must beactivated en, Manuel.

  -'System Event Notification Service"(SENSE) must be active, Automatic.

  -"Volume Shadow Copy" (VSS) must beactivated en, Manuel.

  'Microsoft Software Shadow Copy provider' (SWPRV) must beactivated en, Manuel.

  Once you make changes according to the above specifications, you can try a backup and check to see if that solves the problem.

  I also suggest you to run a SFC scan (System File Checker). This will replace the corrupted Windows files.

  Here are a few articles on Windows backup.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope this information was helpful and let us know if you need assistance in the future. We will be happy to help you.

• Windows Security Service cannot be started, how to fix this?

  Hello
  I use Windows 7 Home Premium. Window Defender won't start. When I click on it in the Panel, he says "this program is disabled." There is a link that says: "If you do not use this program, click here to turn on. When I click on this link I get the message "the dose of specified service does not exist as an installed service (error code: 0 x 80070424)". " When I go to the Panel and the Panel of Services, the program is not listed. So I downloaded the program and tried to install it. He would not have installed. I get an error that says it is part of Windows Vista and requires no installation. It's strange to me that I am running windows 7.
  I then in the center of the Action. There, I found the Windows Security Center Service is disabled. There is a button to turn it on. Thought that would solve my problem I clicked it, only to get the message, "The Windows Security Center Service Can not be started."
  I ran the program Microsoft Fix It. There is no problem. The program is not there or if it is I don't think that and it want let me install it.
  Can you please tell me how to get Windows operational defender and how to get started (running) Windows Service Security Center.
  Thank you... David Sam

  Some other security programs will be disable Windows Defender, it is normal to prevent conflicts.

  Do you have what security/antivirus program installed?

• I received a call from a woman said that she was with the ICC with Windows service provider and that they were getting the error messages from my computer

  * Original title: scam or not

  I received a call from a woman saying that she was with the ICC with Windows service provider and they received my computer error messages and I wouldn't be able to help me solve it.  I asked for a number of 800-373-4609 because he came unknown on my phone.

  I wanted to open my computer.  I told her I would call her back.

  Is it a scam?

  (Moved from P & M)

  Yes, it's a scam. When someone calls and says they need to talk to you about 'mistakes' in your computer, simply hang up.  I just had one of these calls myself about 15 minutes ago.

• On Windows 7 get the error message "the product key you entered cannot be used to activate Windows on this computer."

  Hi, I have original windows7 and I tried to reinstall, but have a problem. When I try to activate I get a message "the product key you entered cannot be used to activate Windows on this computer. pls help me...

  Product ID: 004626-068-2570142-86162

  The ID of the product - 068 - indicates a not for resale MSDN account. If you are not the account holder and you bought it in a box at retail, the box and its contents is counterfeit. Request an immediate refund from the seller

  For more information, see this:

  http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/a2444f34-0AFF-4f29-a8ac-67e28b0c0285

  And this:

  http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/309bb621-92d5-43d6-98c1-2bb51b35607f

  To see how these counterfeits are more, see:

  http://www.YouTube.com/watch?v=hzqNNiOM0cs

  You can buy a legitimate windows from a legitimate retailer.

• The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  When I try to open security as Malwarebyte Anti-Malware programs or open Control Panel, security, device management and several other items in the Panel I get the message "the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."  I started windows in safe mode and ran Malwarebyte Anti-Malware and McAfee and a Trojan horse has been deleted, but I still get the message on several applications when I try to open them.  I tried to set up another account, but when I go to the Panel, user accounts and family safety and try to select Add / delete user accounts, I can't seem to open.  When I click on it nothing happens.  Any ideas would be appreciated!

  Virginia lace:

  I finally solved the problem - I went in Safe Mode W/Networking and then on Windows Installer and Windows Installer of Module (and other things as well as unforunately that I remember).
  In any case - if worse comes to the worst, go to Mode safe mode w/network and pull up your Windows Services, then just turn each window / Microsoft service on which you can (set to start automatically) - orrat less start with Windows Installer Windows Installer of Module and see if that solved the problem.

• The SSTP service cannot be started

  I am trying to share a connection, but cannot start service ICS - error 1068 - the dependency service or group was able to start. I followed the dependencies and the failing service was Manager of remote access connections. He is unable to start because the SSTP service cannot be started. When I try to manually start the SSTP Protocol it gives me a message "Socket Tunneling Protocol Secure Service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs"I changed the startup type to automatic, but nothing helped. My Windows is build 7600 with all updates applied. My computer configuration is C2Q 6600, Asus P5QL Pro, nV 9600GT, 2x2gb Apacer.

  EDIT: I followed this guide by removing dependence on SSTP but now it gives me error 87 - incorrect setting instead of 1068.

  So finally I solved my problem! I removed the RasMan (Remote Access Connection Manager) of the ICS service dependency and therefore probably broke support VPN and Dial-up . Here is the solution for those who have the same problem. Everything you do is your own responsibility!

  Press Windows key + R to open the Run dialog box. Type Regedit . Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ then right-click SharedAccess, and choose export . Save the file, so you have a backup if you want to restore the settings the easy way. Now open SharedAccess, double-click DependOnService , and remove the entry RasMan . Restart the computer and now ICS works perfectly. Make this "tweak" will probably break the VPN and Dial-up support!

• 80070422 ERROR_SERVICE_DISABLED. The service cannot be started, either because it is disabled or because__it has no active device is associated to him.

  Just bought a HP Pro Book 6440 with Windows 7 installed.

  Problem with windows Defender.  Cannot be enabled after a pop up.

  Code: The service cannot be started, either because it is disabled
  There is no active device is associated to him.

  Windows security systems cannot be turned on.

  Also get Automated request

  Message on google: your query looks like automated queries of a spyware application.
   
  blocked warning Spyware navigation

  We recommend that you scan your computer against viruses and spyware immediately and remove any suspicious software found.

  I use Kapersky 2011.  No problem scanning every day.  Programs spyware downdload no change.

  Now after a week impossible to surf the internet or google whatever it is or view facebook pages.

  Tried many things.  Help, please.

  Hello

  Perform the following steps and install automatic updates and then try to turn on the firewall.

  Run an online scan to check any virus or any other malicious software:

  http://OneCare.live.com/site/en-us/default.htm

  Run as Administrator Security Center:

  http://Windows.Microsoft.com/en-us/Windows7/understanding-security-and-safe-computing

  Perform the following steps and update the computer:

  (a) click Start, type Notepad in the start search box, and then click Notepad in the list programs.

  (b) copy the following text, and then paste the text into Notepad:

  start wuauserv sc config = auto

  SC config bits start = auto

  SC config start = auto DcomLaunch

  net stop wuauserv

  net start wuauserv

  net stop bits

  net start bits

  net start DcomLaunch

  (c) click file, click Save as, and then type Repair.bat.

  (d) in the file type box, click all files (*. *).

  (e) in the area save in, click Desktop, and then click Save.

  (f) on the file menu, click on exit.

  (g) the right - click on the Repair.bat file that you saved in step 5, and then click Run as administrator. This action starts the required services. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  (h) try again to install updates. If you install the updates, delete the file Repair.bat. To remove the file Repair.bat, right-click Repair.bat, click on remove, then click Yes.

  Try to start Windows Defender after these steps.

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: Initiator has tried to get around the security phase, but we cannot

  Hello

  I started working on the new company and tonight we lost storage for about an hour and mistakes came:

  SAN1 storage array error event
  subsystem: MgmtExec
  event: 7.4.3
  time: Sun Apr 21 00:58:18 2013
  "connection iSCSI to target '10.10.10.21:3260, iqn.2001-05.com.equallogic:4-52aed6-cb0bdf198-eee0000000c50212-vss-control' initiator ' 10.10.10.22:53396, iqn.1991 - 05.com.microsoft:sp2 - vm - sql2.company.local' failed for the following reason:
  Initiator has tried to circumvent the security phase, but we cannot.

  On windows this evening first errors began:

  EventID: 4025
  Source: EqualLogic
  connection error iSCSI 0xefff0009 connecting to the vss-control for the 10.10.10.41 group volume

  Event ID: 10
  Source: iScsiPrt
  Logon request failed. The login response packet is given in the dump data.

  These errors I see repetition of the past in the Windows event log.

  It is hyper-v virtual SQL cluster with iSCI Dell storage connection.

  How to solve this problem?

  Thank you

  Hello

  Vss control volume, which is used my MS Volume Shadow service to access the clichés of material, there's a GUY configured username. However, the initiator does not send a name of user and password c...

  If you use the EQL TYPING kit, then you should allow these servers access to this volume.  Or change the ACL on this volume to allow that the servers that need to access.

  Alternatively, you can remove it from the Favorites tab, so that he tries to log in the next time the server starts.

  Finally, you can enable the discovery of prevnet filter this of is re - produce.

  Here is a KB from the Equallogic Web site.

  Solution title error: "initiator wanted to ignore the security phase but we can not." or "initiator has tried to circumvent the security phase but we cannot."

  Symptom of solution of details: event on the web interface of PS log table shows a connection error for a volume that says: "initiator wanted to ignore the security phase but we cannot." This error can be repeated continuously every few seconds.

  Question: by default, volumes that have enabled CHAP authentication will be shown during the process of iSCSI discovery even if the initiator does not have the authentication information c. Discovery is controlled by its address IP ACL, so if a machine matches the IP address of the ACL scope, we will see the volume. Note that multiple initiators such as those that are unix based as the initiator of the Cisco software that uses VMWare will continue to attempt to connect to the target (often, every two seconds), even if each connection attempt fails. This can fill the paper and the performance of the server can have an impact.

  Solution: Limit the discovery of volumes CHAP authenticated by IP address and ensure that only servers with appropriate credentials CHAP can observe the volume at all.

  The most common volume to see this error on is the special volume named "vss control." This volume is for communication with Microsoft's VSS service, using EqualLogic host integration tools. If it is configured for unlimited access, or is configured for the CHAP only, then each initiator on the SAN will be able to find out and may attempt to use it. Set ACL "vss-admin" to enter an IP address for each machine that needs to access, to ensure that no one else does.

  For firmware version 2.2.3 and, before going to the volume named 'vss-control', select the Access tab and change the entries here in a proper way.

  For the later version 2.3.2 (including all versions 3.X) firmware, go to the Configuration Group box and select the VSS/VDS. It's the ACL for the vss-control volume, which you should change as appropriate.

  It may be necessary to restart servers that try to access this volume after changing the ACLs, however. Some initiators do not release a target once they have discovered, even though the table indicates that the target does not exist. An example of this are ESX servers, using the software initiator.

  A second scenario may be a volume that is configured to be seen from in a VMWare server VM Windows using CHAP credentials and also install on the table to use a single connection Cap. Even if the credentials CHAP is setup correctly on each side if the ESX Server uses the software initiator that ESX will attempt to connect to the volume permanently every minutes or seconds depending on factors both. With configuration to several volumes in this way, it can be a drain on performance on ESX.

  To troubleshoot this scenario make sure to activate the iSCSI discovery of the IUG table of PS filter. This is done from the Group/iSCSI Configuration tab. check the box off and save the configuration using the Green disk icon in the upper right of the graphical interface. This makes the servers with the initiators that are correctly setup to see a volume with CHAP will see and try to connect to these volumes. Note: once an ESX Server has seen a volume to continue to try to connect with the software initiator until the ESX Server is restarted after this option is turned on.

  Note that, since the version of the firmware 3.0.5 and later, you can require authentication for CHAP-enabled volumes during discovery, by issuing the command in the CLI:

  GroupName > enable discovery-use-chap grpparams

  Kind regards

• I don't remember my direct question of password or the security of windows, and it's preeventing me to enter the xbox live!

  I don't remember my direct question of password or the security of windows, and it's preeventing me to enter the xbox live!

  Help me!

  If you don't remember your security question, you're probably out of luck. Now, you know the importance of keeping the records. In all cases,.

  Windows Live ID is supported in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LiveID