Messaging text... maybe in the wrong forum?

Similar Questions

• Is this the wrong Forum? (conversion q.)

  Hi, I posted a question
  here yesterday asking about how to convert a Flash movie in a YouTube ready (.avi, .mpg, .mov, .wmp) format and do not have all the answers. I'm brand new to both Flash and this Web site, and so I don't know how it works. It could be that just, I didn't wait long enough for a reply, but I have no way of knowing if this is the case. Someone would be able to tell me if I did not get all the answers because
  (a) I did not write my post properly
  (b) my problem is very difficult and nobody knows the answer
  (c) I write in the wrong forum
  (d) none of the above?
  
  If I write on the wrong forum (lots of messages I have read here seems to be related to issues of actionscript, and mine is certainly more graphic and made related), I would like to know where is the appropriate place to ask for help.
  
  Any response would be greatly appreciated!
  
  Gillian

  You could try Sothink SWF to Video converter. Flash is often not very good on the conversion of a Flash project in video format. Maybe they fixed in CS4, but output to MOV or AVI format can sometimes be buggy and inconsistent.

  I much prefer to use the program I mentioned. Exit a SWF file, then the SWF file to the video program does a very good job output to AVI, MPEG and a few other formats. You can download a trial version for 30 days here:

  SWF to Video Converter

• SMS messages that appear in the wrong order

  I've had this phone for 1 week verizon's version now, and from the beginning I was using Message + for texting. Since yesterday I have SMS messages or send/recieve began to appear in the wrong order. For example, USUALLY the person who finally got a text Message from their conversation thread is displayed at the top of the list. Now, it's not happeneing. In addition, in a conversation thread most recent SMS sent/received message does not appear in consecutive order. Rather, older messages (from yesterday) will appear at the bottom, and to see the latest messages sent/received I need to scroll to the top of the older posts. Why my texts appear without all of a sudden? Any ideas?

  Message + is not an app Sony stock so if you have a problem with it either to your network or the developer of the game store for example to bring that to their attention

• cartridge problem with photosmart c5550 75; get the message that it is the wrong cartridge

  I get the message that the cartridge 75XL isn't the correct cartridge for my C5550 all-in-one printer.  We have inserted THREE new 75XL cartridges and the same message.

  Hello jjsl,

  Welcome to the HP Forums.

  I see you have a problem with the printer displays an error of bad ink cartridge.

  "Please click on the following link that deals of a ' cartridge Incompatible ' or an 'Impossible cartridge' message on the computer.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• messages text appears not the conversation list.

  I was remove some older posts today and since then when I get them I have to search the name of the contact to find the message. Before, I had not deleted all text messages would remain in the main list of conversation. Now he comes and tells me that my list is empty. Is this a bug or something I did accidentally?

  New update just released 1.3.5 should correct this problem. Since the release notes

  Messaging

  • If a user deletes a conversation with a contact, new conversations with this contact now display correctly in the Conversations view.

• my text moves in the wrong place when I apply motion blur!

  Hello friends! Thanks in advance for any power to solve my problem. every time I have apply blur moving text he repositions the text permanently... I need to remove the effect of motion blur in order to have this text stay the course... any suggestions?

  What exactly? "Blur" effect sounds a bit sketchy. Motion blur is a normal layer property and if it doesn't look like it is, there are 1 million things that can influence it animation of the layer itself to motion path or shutter phase and shutter time camera. You must be more precise.

  Mylenium

• How to increase the size of the message text style in the OPS

  Hi all

  I moved the region of the table, I use a text element of style message, I need to increase the size of the element.

  I tried with the definition of properties such as the maximum length and width, but does not.

  Kindly do the needfull help.

  Kind regards

  Sangu

  Hello

  Try by setting the width of the column of table % like 50% advance property to increase the size of this column that I think possibly increase the size of the bean style.

  BR, FLS

• [ETA: posted in the wrong forum, sorry! will transfer in the relevant forum] playback of samples: atomicity of critical section?

  Hi all

  I have the following situation:
  -a single thread (T1) is constantly reading from a USB NI 9229 module samples into a local buffer and copying a table a (44100 Hz)
  -another thread (T2) is waiting for an order and then copy a lot of A 44100 samples to a local array variable and make a calculation with them
  -array A is protected in a critical section (T1 and T2 enter the critical section when you work with A directly and then leave)

  How "atomic" is the device samples in my array A reading? That is, it is guaranteed that the protection of the critical section in a way that at the time T2 accesses A, T1 has finished writing 44100 samples in there?
  Or should I register with DAQmxRegisterEveryNSamplesEvent() a reminder that 1) reads 44100 samples, 2) warns T2 that the batch is complete and available?

  Thank you in advance!

  As I understand the situation, the answer should be "Yes": the table is protected until you exit the critical section.

  But may I suggest an alternative, perhaps simpler approach?

  If you configure a thread safe queue 44100 elements that ignores old items, with T1 that fills on top, T2 can freely read the queue without disturbing T1, seen available the most recent series of data in any time.

• Hi, I may be in the wrong forum here, but now,.

  I have CC and ambient light. I use a Mac and not happy with the new photos on the Mac, y at - it app to store / organize my photos in the same way fact iPhoto where I can edit using CC. The new pictures on Mac does not allow this, very frustrating that I shoot in RAW.

  Thanks in advance.

  Chris.

  Hi Christopher O'Hara

  We recommend that you try Adobe Bridge CC to organize the photos if you didn't like Lightroom in their reorganization.

  Thank you

  Atul Saini

• error message saying that it is the wrong key when you use a sticker

  Product key

  I have an OEM version of vista Home premium. I'm trying to load on an acer extensa 5420 using the product key on the bottom of the laptop. When I enter the key, I get an error message saying: it's the wrong key. How can I use this disc to reinstall windows?

  Hello

  The OEM recovery disks are the brand and the specific model

  You can't use a disc from another manufacturer

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• The Message text on maybe more big Mac box?

  The Message text on maybe more big Mac box?  Is it possible to increase the size of the message text box (the window you type in) when using iMessage on a Mac?  I find it weird that even when iMessage is open to full screen on my Mac, the area or window in which I type my message is tiny and located at the bottom of the screen.  3/4 of the screen is literally not used.  I wish I could enlarge the size of the box, or at least move it to the top of the screen.  Is this possible?

  Hello

  Partly Yes.

  

  20:32 Monday; February 1, 2016

   iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• Z10 allocated to the wrong Contact incoming text Messages blackBerry

  Recently, I received my Zed10 return of warranty repair for an out of the box of malfunctioning headset port and is now experiencing a thousand times more frustrating issues.  The phone is now problems when I got a text message in which he he attributed to the bad contact.  I checked the contact information, there is no duplicate numbers, the number of the text comes from the East only attributed to a contact, but through an SMS conversation, it may seem that I'm talking with 3 different people, which is very confusing.  Before that I sent my Zed10 in I made a full backup, then wipe to security.  I received my unit exact same warranty return, updated to the latest OS, did a restore of my backup and now this.  I went through and deleted the whole SMS, which seems to fix the problem, but after about an hour it started again.  Some figures it's now show as incoming texts are not the numbers of my contacts, and I can keep the conversation going by answering the real contact on my phone (if I am not answering the number that he told me that the text came, the person at the other end has no information of any text).  If anyone has experienced this?  Given that we have really not contact, backup in bond options as we did in DM my next attempt "fix" will seek to move my contacts to my SIM card and wipe the device... once again.  Very happy to have my BB10 back after 2 weeks on a 9300 Curve, but it is VERY frustrating.

  If someone had something like this happens, please help.  Thank you all.

  Please read this:

  Messages SMS appear to come from the bad contact when received on the smartphone BlackBerry 10

• the system cannot find the message text for message number 0 x in the message file

  Hello

  I use the MKLINK command to share a public directory in my file server for all organizational units.
  After I set the NTFS permissions on the server, I can open directories related to all the directories of the OU but in client windows XP to return this error window:

  "The system is not message text for message number 0 x in the messages for \\Filesrv2\IT\Public file.

  Thank you for your time

  Hi Babak,

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• When you try to install fix - it files, diagnostic and cleaning Center. I get a message that it is in the wrong format

  original title: format of the troubleshooting tool

  When you try to install fix - it files, diagnostic and cleaning Center. I get a message that it is in the wrong format. How can I fix it so I can clean or remove the unwanted [for example registry files]?

  Hi RandyHunter,

  1. what you trying to accomplish?

  2. What is the question you are facing on the computer?

  3. you try to install Microsoft fixit tool?

  4. did you of recent changes on the computer?

  If you try to install Microsoft fixit tool then I would suggest that you post your query in the Sub forum mentioned.

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

• Security event log getting the message "local computer maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries. System and application logs do not receive messages

  PC is Windows XP.  The server is Windows 2000.  I have administrative rights on both machines.

  On getting PC security event log do message "local computer, maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries.  System and application logs do not receive messages

  Hi carmol,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on TechNet forum.

  Please post your question in the Sub forum. Link: http://social.technet.microsoft.com/Forums/en-us/winserverManagement/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.