Method to create script
Hi gurus
I wonder what should be the method of creation of script file. My script contains a DDL and DML statement... Can someone guide me or to provide a small sample...
Muzz says:
Thanks for the responses, in fact I've already created a script and want to know what are the set command, I need to use as the value out of server on a defined line size, the value of echo on... .spool file on...
.
No one can tell you what SET commands, you must use because no one knows your specific needs. All you have to do is read the relevant section of the documentation to https://docs.oracle.com/cd/E11882_01/server.112/e16604/toc.htm. And don't forget that these are the sqlplus commands. These are guidelines to sqlplus himself. Do not apply to any other tool client that you can use to run your scripts.
one more thing that I use / after each statement, my question is should I use semi column and slash after each statement or only / is enough...
Once again, the docs are your friend if you actually...
https://docs.Oracle.com/CD/E11882_01/server.112/e16604/ch_four.htm#i1039415
https://docs.Oracle.com/CD/E11882_01/server.112/e16604/ch_four.htm#i1039663
Tags: Database
Similar Questions
-
Create script for manual insertion
Version = database Oracle 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
Hi gurus
I must create script to insert data into my target table and I wonder what is the best way to do this, I don't want to do simple insertion, as below.
insert into the emp
(empno, ename)
values
(12, "xxx")
------------
insert into the emp
(empno, ename)
values
(13, 'yyy')
Please suggest. Thanks in advance
Concerning
Shu
Hello
Of course; If you find it is easier to SELECT all double values, then you can do it like that.
Do not forget that the syntax is
INSERT INTO new_table (col1, col2)
;
where
, begins as usual, with SELECT or WITH. The UNION can be part of this query. for example Insert into the emp
(empno, ename)choose 10, 'yyy' from dual
Union of all the
Select 11, 'xxx' of the double
Union of all the
Order 12, 'xxx' of the double
;If you really want to use a WITH clause, then what you posted was almost right; you just need to lose the parentheses around the query, that is the left "(" immediately before WITH. and the right ') "at the end.
-
Create scripts to populate tables from flat files
Hello
How can I create scripts to complete the flat files using pl/sql tables.
Kindly help me.
Kind regards
Prasad K T,.
9840021070
Hi PrasadKT,
As Tsharma pointed out just save the .xls (or xlsx) file in the .csv file.
Please see steps that I show below...
My XLS file looks like this... (I wish I could paste pictures here :-()
1 AAA JJJ QQQ 23.2 2 BBB ASDA QQQ 12.111 3 CCBC ERTE WER 10 4 FFFFFFF ASDA GODSWILL 0 5 YY DDD SNOW DEPOSITS 12 Once saved as CSV (separator: semicolon) (*.csv) the contents of the file in Notepad looks like this...
1, AAA, DDD, QQQ, 23.2
2, BBB, ASDA, QQQ, 12.111
3, FCCC, ERTE, wer, 10
4, FFFFFFF, ASDA, GODSWILL, 0
5, YY, DDD, MALDINI, 12
Create a directory in Oracle... (This must be SYSDBA user)
> create or replace directory xtern_data_dir as 'C:\TEMP '.
Created XTERN_DATA_DIR directory.
> grant read, write on directory xtern_data_dir to HR
Grant succeeded.
Log in HR (or normal user) and create an external table... If you are running on ODCIEXTTABLEOPEN error, please make sure that the user of the OS which launched the Oracle process has READ/write permission on the directory of the OS
> left autotrace
People with disabilities autotrace
> drop table xtern_table
table deleted XTERN_TABLE.
Elapsed time: 00:00:00.052
> create table xtern_table
(varchar2 (10) c1,)
C2 varchar2 (10),
C3 varchar2 (10),
C4 varchar2 (5).
C5 varchar2 (10)
)
external organization
(type ORACLE_LOADER default directory xtern_data_dir
access settings
(fields ended by ',')
MISSING FIELD VALUES ARE NULL
REJECT ROWS WITH ALL FIELDS are NULL (c1, c2, c3, c4, c5)
)
location ("mycsv.csv")
)
table created XTERN_TABLE.
Elapsed time: 00:00:00.013
> proprietary format of col A10
> col format a20 directory_name
> select master, SYS.all_directories directory_name
OWNER NOM_REPERTOIRE
---------- ----------------------------------------
SYS EXT_INPUT
SYS XTERN_DATA_DIR
Elapsed time: 00:00:00.014
> select * from xtern_table
C1 C2 C3 C4 C5
---------- ---------- ---------- ----- ----------
1 DDD AAA QQQ 23.2
2 BBB ASDA QQQ 12.111
CCBC ERTE wer 10 3
FFFFFFF ASDA GODSWILL 4 0
5 AA JJJ SDFS 12
Elapsed time: 00:00:34.419
I hope this helps.
VR
Sudhakar
-
Method to create a silhouette of an object without tracing it.
I have trouble finding a function or a method to create a Bezier path of an object without having to draw a new line.
I have an existing, established image from a CAD program, in vector. I would like to make a silhouette of the entire object. Problem is that when 'unit', the whole things turns into one bunch of other small objects because the lines are not joined or joined with something else than to the beginning.
The result is like this,
Left is original and the right is when I 'unit '. (I colored to make things easy to see)
Any of you have a way to do it without having to find the object manually?
no promises, but it give a try.
Make a copy of your object. (blocking or otherwise leave the original unmolested).
Select the copy. do a live paint Group (object > live paint > make)
Make sure that there not already fills. If there is, select it, and then set it to no fill. Remove strokes the same way.
now to add a fill to the entire live paint Group (select it with the black arrow and set a fill color), any color.
If it seems that you think should be, select the live paint group and click "expand" in the control bar (or object > live paint > expand).
now use pathfinder > unite.
I hope that you now have a single path that corresponds to the outline of your original color as you please.
-
Preferred method of creating a relief database creation
Version: 11 GR 1 material
Which is the preferred method of creating a database of pending? Is it by
a. copy the relevant files to the standby server
b. use of RMAN
c. use of Data Guard BrokerVery beautiful :^)
In order to clarify. You do not use the broker to create the day before. The Broker allows you to manage a wait that you already created. There are no orders in the broker to create a database of pending. If you use Enterprise manager Grid Control, you can use it to create a database of pending which will then automatically (except if you say no) handled by the broker. Take a look at http://www.oracle.com/technology/pub/articles/havewala-easydr.htm for a nice article on how to use the Grid control to create your vigil.
There are also several documents of MAA on the subject.
http://www.Oracle.com/technology/deploy/availability/PDF/MAA_WP_10g_RACPrimarySingleInstancePhysicalStandby.PDF
http://www.Oracle.com/technology/deploy/availability/PDF/MAA_WP_10g_RACPrimaryRACPhysicalStandby.PDFto name a couple.
And of course, there is the Manual:
http://download.Oracle.com/docs/CD/B28359_01/server.111/b28294/create_ps.htm#i63561
and
http://download.Oracle.com/docs/CD/B28359_01/server.111/b28294/rcmbackp.htm#i636377But of course (attention, shameless plug book) you should read Chapter 2 of our custody of 11g manual to http://www.amazon.com/Oracle-Data-Guard-Handbook-ebook/dp/B002JA02GG data
Larry
-
How do I keep track of all the classes/methods/properties created in a long script
HelloI'm curious to know how people use to keep track of all the classes, methods and properties that you created when you write a script any longer.
For quick scripts, this isn't a problem. But for long scripts, it can become quite difficult to keep track of all the objects, was created, and all their methods and properties and builders overloaded, etc..
ESTK is large, and it is the IDE that I use for InDesign scripting, if only because of, it is powerful, debugging options.
But it provides no way to keep track of such things. No good Intellisense in Visual Studio.
I'd be curious to hear how people solve this problem.
JsDoc can generate documentation for the JavaScript API commented and can be used for ExtendScript.
-
What is the most modular method to create a 'plan' generated automatically?
I have a 'plan' that I am currently building a test at the beginning. My "plan" consists of 3 levels of the Organization; the unit, the Group and the arrangement.
There are a few types of units that I intend to create, but I'm looking for only a few basic methods; I can shake the details in regards to specific controls, resizing, positioning, etc.
There may be<= 4="" units="" per="">=>
There are 4 positions in each arrangement; one for each possible unit.
There may be<=20 groups="" in="" the="">=20>
There is only a single arrangement; the arrangement is the entire floor plan.
Each unit is composed of some Boolean LEDs, progress bars, graphs of waveform and digital indicators.
Each group is simply an arrangement of units; with an indicator of string as a label.
The arrangement (floorplan itself) is just an arrangement of groups.
I considered simply create typedefs for each control so that I can change or resize each if necessary control and have the changes automatically cascading, but is there a way for me to create a typedef for each unit, although it contains several controls? Within the unit, all controls will have a size and position, so it would be nice to be able to resize and rearrange the controls in the unit and have all these changes cascade to all units. It would also avoid having to define the positions of each control for each unit (I could just define the position of each unit).
I've attached a screenshot of the arrangement (floorplan) .jpg because it currently displays. You can see that inside, there are 8 groups (labeled SX #) and 4 groups of different type (labelled RC #). Within each group, SX, there are 3 units (with a color box gray placeholder where a 4th unit could display).
I know my questions can be very basic and obvious to experts on this forum, but I have very little training LV, so I am left to my own here.
Thank you for taking the time to read my message; I hope it is at least as clear as mud.
You can create a definition of a cluster type and a cluster can contain several data types. That answer your question?
-
What is an effective method to create presets?
Hi all
I am trying to create presets for my VI and I would like comments from other people who were created pre-defined methods. I saw this post and saw that it was possible to create a "Preset" pre defined pretty easily. It is one, but I need to update my presets on the fly. Basically I want through four servos pulsewidth at a certain position. However, there will be a lot of different positions (~ 20) I need them to be at, and try to arrest the code and constants looks like it will be extremely difficult for each preset. I would like to create a predefined method that would take the servo location and store it somewhere so I can load it again later.
One idea I had was to create a txt file and store the pulsewidth of each servo. This way I could replace the file and read the file at any time.
I searched in the structures of the event, but that seems like it will go with the idea of making pre made presets.
Any help would be gladly appreciated.
Thank you
Matt
If you have just 20 positions, which will never change you can use Enum control connected to a case structure (all this in awhile put in loop). If the Enum control value changes, select the box structure that contains the values to correct pulswidth.
If your positions could change overtime, an external file would be a good way to do. Look at the Configuration files. You can write an article for each position. In each section, you will store the 4 values of pulsewidth you need.
-
What is better/more quick method to create a table (Oracle 11 g 2 dB)?
Assuming that there are no statistics for the source tables - tables are deleted and recreated every day
My paintings have a few million lines
I'm trying to create a filled with data as quickly as possible via
1 createtable_name as SELECT * from emp;
2. create table_name
Parallel degree 4
in SELECT * from EMP ;
I have 1 case I had some time 34 Sec
In case 2, the table was created in 15 Sec
In oracle other possibilities to create a much faster with this DEC?
Or it will be faster when I create a table using create table_name
(
column1datatype [NULL |] NOT NULL],
column2datatype [NULL |] NOT NULL],
...
column_ndatatype [NULL |] NOT NULL]
);
or maybe I should use this method
INSERT /*+ APPEND */ INTO empSELECT * FROM all_objects;
INSERT /*+ APPEND_VALUES */ INTO emp SELECT * FROM all_objects;
or it is better to simply creating a table
and to use the FORALL in BULK IN THE COLLECTION instruction
combination of Pentecost of the
INSERT / * + APPEND * / INTO emp;
I encourage you to test different options - as you did for the first two variants: personally, I think that it is much easier to remember these things if I did the tests myself - instead of trusting in the results of others. IE I don't think that there is something more fast parallelized ETG (perhaps with a clause (*)) additional nologging by using path direct inserts (although that INSERT APPEND select should do the same). I expect the operations in PL/SQL block to be slower.
(*), but you should consider the consequences of NOLOGGING for your backup strategies + recovery
-
Creating Scripts versioning?
This question comes up an operational animator-editor-producer, not a coder-developer, so please accept my contrition in advance if the formulation of this question is suboptimal for this forum.
This is my fifth day as a PrEditor for an Animation/VFX Co. here in Austin. My EP told me yesterday about the possibility of a creation script that would scan a directory (with several subdirectories), find the latest version of a media file (probably based on a segment of a file name), and update the corresponding item in the order with the last file.
As a media element operates through the pipeline of animation, he travels rigging, animation, lighting, effects, composite, etc.. Each output of these ministries produces a file in a directory. The files are not overwritten as a general rule, if the XYZ_anim_V1 becomes a V2. Anim could become XYZ_comp_V1 after this file moves through compositing in the model directory.
In a perfect world, would open a master project of PP, the script will be executed and all movies would be updated with the latest version regardless of which directory the file is in. A review of the sequence could ensue then it would surely be a holistic Visual State for the animation project.
Is such a script or solution or the possibility of creating a solution exist?
The behavior you described should be possible today, in a sign of the HTML5-based body. What your JavaScript?
Here's an example PProPanel: samples/PProPanel to master · Adobe-CEP/Samples · GitHub
Here is 'how to set up a system of panels dev': Samples/ReadMe.md to master · Adobe-CEP/Samples · GitHub
Work in the readme file, play with the sample and feel free to ask me anything.
-
Why a method to create a constraint would allow the index to be used, but not another.
Hi all
With the help of:
Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production
SQL Developer Version 4.0.2.15
I had to do the following query on a table.
Select distinct chdrnum, tranno
of ractpf_pgr;
I ran the setup of SQL in SQL Developer, who told me that he was doing a full table scan,
(It's what you get using SEPARATE!)
After some research, I discovered that if I put in question on columns not null check constraints
and then recreated the index based on these columns, I'd get a full index scan instead of a table scan.
Good news - off, I went and tried using the following method (I think it's call a constraint of out-of-line)
and created one for each colmn using snytax below.
ALTER table RACTPF_PGR add constraint CS_CHDRNUM_NN check (CHDRNUM is not null) validate;
Ran my SQL Tuning Advisor again - no joy - a full table scan that was happening.
Did some more research and recreated the constraints with the help of an online method
ALTER TABLE RACTPF_PGR CHANGE (CHDRNUM CONSTRAINT CS_CHDRNUM_NN NOT NULL);
My SQL Tuning Advisor is represented - and yes the index was used.
But what I want to know why a method would cause the index to use another does not
Thanks in advance.
The second is a NOT NULL constraint.
The a ('is not null') is technically not a NOT NULL constraint.
Give me a moment to start my database, and I will demonstrate.
Edit: Here's the demo:
SQL> create table x (a number null, b number null); Table created. SQL> alter table x add constraint a_nn check(a is not null) validate; Table altered. SQL> alter table x modify (b constraint b_nn not null); Table altered. SQL> select column_name, nullable 2 from user_tab_cols 3 where table_name = 'X'; COLUMN_NAME ---------------------------------------------------------------------- N - B N A Y
The index does not store registrations for the lines where all components of the index are null, then the optimizer needs to see that the columns are not nullable to be able to use an index scan.
-
Need someone to update or create script: "snap to grid of pixels.
Hello
Before we begin, I want to say that I don't quite understand any code.I have a script that ripped up check and uncheck the command ' vector tools Snap and is transformed into pixel Grid "(" preference > tools ' CC 2015)
I downloaded it long ago on a site that I do not remember it's free to use, I created the shortcut for it and it works very well until 2014 cc.
I've updated to 2015 of CC and the script does not work, I think because they change the path where it allows for CC in 2014.
If someone can update (send) or create the new script for 2015 CC he great help circulate my work.
PS.
If this can be done in the "menus and keyboard shortcuts" without a script, please let me knowBest,
EliWhen Adobe changed over the preferences panel, it broke a lot with scripts. The transformsSnapToPixels no longer has a key. This is a bug that Adobe is aware and it's going to be fixing.
-
A method to create halos on several lines without any visible overlap halos?
I am struggling to find an easier way to create a uniform halos on duplication of line. It must be reversible. Which means that I can change whenever I can.
Vincent
If you group the black lines - without first apply the white line - you can apply the stroke to the group level in the appearance Panel, then move it below is the contents of the group. then it will appear below all the black lines, not individually.
-
I d like to use the Script function, one creating my own script or action.
I think that this function is not possible in element 11 so the question would be is in the 12 element or just photoshop CC?
Thank you
Bertrand
You can create your own scripts in a couple of different ways.
(actions are easier to record than writing scripts, but we need full version of photoshop such as photoshop cs6 or cc2014 to record the actions)
Java script is the most common, as it is works on mac and windows.
(not to be confused with the manuscript of java for browsers, internet and such)
You can write your own or it is possible that someone else has already written one.
As far as stocks go, by far the easiest way is to use the full version of photoshop to record an action.
(PES 11 can load and game record in photoshop actions, but was not built in the action recorder)
It is probably much easier to find an already made to a script action.
What kind of script or action did you have in mind?
-
quick method to create a new layer under the current layer?
would be the best way to quickly create a new layer slot rather than above the active layer to assign a script to a keyboard shortcut - or is it possible to change the default new layer shortcut (command + option + SHIFT + N) to create a new layer above the current layer to create rather a under the active layer?
Thank you
Command-click the new layer in the layers Panel button.
Maybe you are looking for
-
Links of search results Google does not load (not a direct new problem)
Simple problem:1 enter a term for Google to search for (either using the Google toolbar installed or via his landing page).2. the results are returned correctly.3. However, the returned links open in the same tab of search result, or in a new tab or
-
A single Firefox window with multiple tabs is not displayed, and yet other new windows will be
Question [1], a problem that I need help. . Is this a window of my browser, with all my precious tabs will not appear anywhere but the taskbar. [2] I know that windows have loaded, but they cling. [3] this I theorize is the fulfillment of one page -
-
OfficeJet 6600 Gets the message of Network Installation fails when you try to install
Hello I have the worst time setting up my new printer wireless Officejet 6600. I work with a wireless-N router that was purchased less than a year ago. I have other wireless products that work well with the internet, so I do not see there is a connec
-
I searched and downloaded every suggestion of recovery I can find on the internet. Nothing worksIdeas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem Remember - this is
-
BlackBerry Smartphones 8300 Curve theme
I was wondering if anyone might know of a reputable site that I might be able to download a style Curve 8300 theme of for my new Bold 9700? I am very attached to my trusty old curve and I am used to navigate the icons in the 'Dimension Zen' theme tha