Method to determine if the device is in DST?
Hi, I looked around, but I'm not...
Is there a standard (or algorithm) method to determine if a device is in time, regardless of its current time zone?
(I develop in 4.2.1 but I would appreciate a solution for a later version of the operating system).
Thanks for any help.
Edit:
Missed your post, I see that we thought along the same lines. I have not had a detailed look, but I'd be concerned about your code to work because if DST is used or is not specific times as well in specific Date. I'm not sure that your code works correctly on the first and last days of the DST. Unchecked hard you mind. Would be interested in your comments.
Tags: BlackBerry Developers
Similar Questions
-
How to determine if the device supports portrait / landscape views?
Is there an easy way to determine if the screen of the device supports portrait / landscape views?
(We need to provide different settings for the user)
Until recently, we used check similar to the following:
If OS > = "6.0" & AccelerometerSensor.isSupported)
but this code does not work on the new Bold 9900 (which has the accelerometer, but has no landscape mode).
We are looking for a solution that doesn't invlove by manually checking the models...
Thanks in advance!
You can use the DeviceCapability.isRotationSupported method to determine this. This class has been added in BlackBerry Device Software version 6.0.
-
How to check a program if the device is currently locked?
How to check a program if the device is currently locked?
Is there an API that can tell me who?
I used DeviceInfo.isPasswordEnabled () but it doesn't seem to do the trick
You can use the ApplicationManager.isSystemLocked () method to determine whether the BlackBerry is locked.
Concerning
Bika
-
Get the device ID in the BpsSubscriptionMessageBuilder.createByteSubscriptionMessage method
Hi all,
First of all, sorry if this thread is not appropriate because there is a similar. If there is, I have not found.
I want to build an application compatible with its server push, but I don't want to use servlets and the jar provided by push SDK service.
I think that the only thing I have to do in the server part is to get the PAP message with the required parameter 'address' (the device) using low level libraries.
However, I have a problem of developing the application in the device. Using this code as a reference:
http://docs.BlackBerry.com/en/developers/deliverables/21128/Subscribe_to_a_BPS_content_provider_1226...I see that the parameter 'address' is obtained in the createByteSubscriptionMessage method, but I don't see its implementation to get the parameter 'address' (got to the servlet subscription) because it is a native method.
Thus,.
1 - see the API:
What is the parameter 'address' obtained in the server (servlet subscription) part? The device ID? How can I get it back?
2 - I could build the app-client just stay at step 6 and send the HTTP message on my way?
Can someone help me?
Thank you all.
Kind regards.If I understand what you're trying to ask is how to get the address of the device your application to initiator to push aside server.
If so, you can see an example here:
https://developer.BlackBerry.com/Java/documentation/registering_to_receive_push_messages.html
Basically, you can see the code example in the sample application compatible push built a HTTP message to send to its application server-side. Although this example sends the HTTP message in the format SDK expects that you don't need to use the SDK or the same format, but you can follow the example to send a simple HTTP message on your own server to send the information about your application requires server-side. For example, the link above shows that to get the address of the device, you can do this:
Integer.toHexString( DeviceInfo.getDeviceId() )
In side your application server, you must save the address of the device, then when you build the push request message that you use as the address of the device if you are using the low level SDK APIs (or enter this value in the field address PAP XML if not not using the SDK).
-
Hey,.
I just have a small question. I am developing an application and I want to assure the compatibility of some models (eg. 9550, 9530, 9700 (a). Is there a way to determine the version of the OS and the Version of the model of its blackberry through the JDE access?
Use the DeviceInfo class. DeviceInfo.getPlatformVersion () to get the BONES and the getDevicename() to get the model of the device
HTH
-
How to determine if the user of the mobile device is looking at a site office?
Hello
We have activated the Mobile support for a site. So now, when a user on a mobile device go to the website they see mobile model.The mobile template includes a link to the user to view the full site: < a href = "/ index.html? visitorDeviceClass = desktop" > full view of the Site < /a >
We want to add a link 'view the Mobile Site"on the Office site but only for users of mobile devices.
We tried to {{globals.cookie}} and {{globals.visitor}} to see if there is something we can watch (using javascript) to determine if we have a mobile user who visits the site of the office. But it looks like visitorDeviceClass and deviceClass are set to "desktop" for real desktop users and mobile users who clicked on the link "View Full Site.
We believe that we could be able to watch her User Agent but do not know what OS is displayed for Windows phones and we are not dependent on not user agent.
Question:
Does anyone know of a way for us to determine if a mobile device user look at the desktop version of the site so that we can add a link 'view the Mobile site?
Thank you
sepyh
Hey,.
You can basically determine the device of the visitor to the site in two ways:
- how Robert mentioned, using the module of system_visitordeviceclass - http://docs.businesscatalyst.com/reference/Modules/General/system_visitordeviceclass.html
- using globals liquid - {{globals.visitor.deviceClass}} - Globals. Catalyst of business support
Hope this helps,
Mihai
-
Stop method determines when the corruptions are repaired
Hi all
Above statement is 'Oracle 10g Ocp Guide of Certification all-in-one'. This statement "chosen shutdown method determines when the corruptions are repaired" is written in the section recovery instance.
Now the question is, if we do normal stop, how can the database or instance to get corrupt?, Corruption can be occurred only because of the messy or 'give up' or any other breach. It can be detected only at the next startup. So this is the difficulty that corruptions are repaired at the start of the proceedings thus set out reference in question makes no sense.
If someone can explain to me, what is submitted statement is all about?, I have.
Thank youAssume that you have a server, including controller get "confused" disc and begins to generate corruption level block...
-
Names under icons of printer in the devices section exchanged around without warning. I can print is nothing more.
Hello
Please contact Microsoft Community.
I understand that you are facing the issue on the printer.
I will definitely help you with this.
Please provide information below.
1. you get any error message?
2. what exactly happen when you try to print?
3. don't you make changes to the pc before that?
I suggest you go through the below methods:
Method 1: Try to run the printer Troubleshooter:
Press Windows + R key.
Type of Panel, and press ENTER.
Click on troubleshooting.
In the left pane, click View all.
In the list, click the printer and run the troubleshooter.
Method 2: Try the clean boot:
A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.
I hope this helps. Please post back with the State of the question and we will be happy to help you further.
-
Support to properties of the device - GPS and WIFI
Hello, I am developing an application and I would be taking in charge all models of devices with gps and wifi support. Is it possible to get information, if the device supports GPS and Wifi?
What devices is touch screen, there is a class touch screen and an isSupported() method, which returns false, if the touch screen is not supported on the device. Is there a similar method for Gps and Wifi, too? I searched the web, but I can't find anything about this and I think that's not good filter device names to determine if the application should run or not. I would appreciate a quick response time to the app's short... Thanks in advance.
-
Could not load the device driver for DVD/CD-RW - Satellite 1110
I have a Satellite 1110 and something has gone wrong with my DVD/CDRW and it will not read any CD. It is reported as a CARPET * A UJDA730 DVD/CDRW but the device status is shown as:
"Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »
I tried to uninstall and reinstall the device, but the error just return. I can't find a driver to make it on the web site of the manufacturer or Toshiba. I don't want to use the product recovery CD because it means I'm losing all software and data on the hard drive.
Can someone advise how to recover from this situation?
Thank you
Hello
First of all you n t a driver for the CD/DVD drive. The drive uses the standard Windows OS driver and it s not necessary to install additional.
I suppose that there could be something wrong with the registry entry.Please check this forum announcement:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843The user has used the statement that has been proposed on the site of Microsoft.
This should help.Please post again if this method is successful.
-
Can't see the devices connected to 2.4 GHz WiFi
I recently bought and set up a R6220-100NAS Netgear with the 2.4 GHz and 5 GHz WiFi signals available less than a month ago and updated to the latest firmware, when I ran my initial installation (although I don't know which version it is). I have 1 PC connected to my router and other devices (including my printer) are connected wireless.
Since the installation of this new router, I noticed that I cannot print on my Canon PIXMA MX892. I was not able to solve this problem, as much as I would like, but so far, I've been able to determine that the printer is only able to connect to my network of 2.4 GHz, and I can't ping from my PC (ping to the IP address response comes back under the name of "unreachable" as opposed to the typical error "request Ping" can't find host).
I tried ping my Smartphone when it is connected to the 5 GHz WiFi band and had no problems. When I spent my smart phone to the band of 2.4 GHz and ping its IP once again, I got the same message "inaccessible".
Some tips on how I can still fix this and restore my print capabilities?
Problem solved. I did a factory reset on the router (and manual reconfiguration) and I can now print and ping on two WiFi networks devices successfully. Looking at the configuration settings that I saved before the reset, it looks like isolation wireless has been activated for the 2.4 GHz WiFi network. It was set to '1' in the .cfg file.
It was my suspicion from the beginning, but I couldn't find the setting in the router installation options.
-
Once itunes game is finished, it automatically removes the songs on the device, it matched?
Hello
ITunes game scans your iTunes library on your computer to determine which can be mapped or needs to be uploaded. It leaves the original files intact. If a track is matched and you want to upgrade to 256 Kbps, you select Delete DOWNLOAD hen you can download the upgraded versions. The music was everything or uploaded from your computer will be available to listen to or download on your iOS devices.
Jim
-
Subtraction and the determination of the base
Hi everyone - I need help to determine how best to make a determination of the base then subtract leaving just the tops. My data are profilometry measurements on a substrate surface. As you can see in the table below the substrate surface is pretty simple but not lying flat on the scanner table. I'm looking for a simple method identify the linear base line, then he subtract from the raw data, leaving the four peaks with essentially a zero/horizontal) basis. Then I can use the Ridge detector to identify the peaks and their locations so that I can make additional calculations (especially area of the PEAK and average maximum height).
Any suggestions on the best way to go about this?
An polynomial fit using the "less absolute residual" is relatively sensitive to outliers and seems to work quite well in this particular case.
See if it works for you.
-
Hello
I just deploy the tomcat in windows server 2008 and to test whether it is installed correctly. When I opened the IE9 and type in http://localhost: 8080, he goes to the homepage of tomcat successfully. However, when I slap http://127.0.0.1:8080, it shows that Internet Explorer cannot display the webpage (normally, these two methods are the same for the homepage of tomcat). Then I try to diagnose the connection problem. The problem found is - the remote device or resource does not accept the connection. The device or resource (127.0.0.1) is not configured to accept connections on port "8080".Then I tried the same procedures in my own laptop, there is no problem. So I wonder if there's some features are disabled on the windows 2008 Server. Can you help me?Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/categories/ -
I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond. How can I fix this problem please?
Hello
1. what operating system is installed on your computer?
2. are you using wired or Wi - Fi?
3. you will remember to do recent changes on the computer before this problem?
I suggest you
Method 1:
Empty the Cache DNS (Domain Name System) follow the steps below:
a. click the Start button.
(b) in the search box, type command prompt.
c. in the list of results, right-click command prompt, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
d. at the command prompt, type ipconfig/flushdns.
Method 2:
If the previous step fails, follow these steps and check if the problem persists:
a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.
b. right-click on the connection you use for the local connection, and then click "Properties".
c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222
e. click 'OK' twice to complete the change.
f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.
Method 3:
If the previous step fails, follow the steps described in the following link:
http://support.Microsoft.com/kb/928152
For more information, check the following links:
Maybe you are looking for
-
I tried to add a site blocked to adblock and now I lose my format for my Yahoo mail page.
Instead of to the page size of regular mail I get a single column summary of my mail. I can't grab it. I disable adblock and my page is normally formatted. I walked into this condition, trying to block ads that appear on the page Yahoo database.
-
C665/012 satellite charging battery light orange rest
I recently bought a * Toshiba Satellite C665 / 012 * and every time I try to load light _orange will remain just on_ and when I decide to unplug the battery status remains at 99% and not depleat or increase_. _ What could be wrong with it and the war
-
LaserJet CP1525nw said "Low memory" and do not print
I can't get my HP LaserJet BP1525nw of printing. It says "low memory". Then, when I click on the OK button then it prints a page that says PCL XL Error and error: InsufficientMemory. How do I clear the memory? And if I do not delete how can I keep
-
I can't reinstall HP Photosmart C5280 AllInOne. All the drivers are up to date.
I can't reinstall HP Photosmart C5280 AllInOne. All the drivers are up to date.
-
I have installed this upgrade ten times. It keeps saying ' inportant upgrade "How can I stop it from appearing every morning." Its getting boring