Subtraction and the determination of the base

Similar Questions

• I was processing the photos and the base on the right feature disappeared (one who has exposure etc) I know see the histogram, and then curve of tones, STL/color/B

  I was processing the photos and the base on the right feature disappeared, which contains the exposure, contrast etc. I now only the histogram, Paint Brush, etc., then it goes to the curve of tone, STL/color/b & W, and all others down for Calibration of the camera. How can I retrieve Basic? Thanks for your help

  Right-click on the header of the tone curve and put a check mark next to the base.

• OfficeJet 6500 E710a-f: how to download the latest firmware and the BASE driver for my Officejet 6500 on Windows 7

  I'm looking for a way to download the latest driver and firmware base packages for my Officejet 6500 E710a-f for Windows 7, x 64 (latest patches and service packs applied).

  Regardless of the road I take (including the link called "Download drivers"), finding drivers inevitably leads me to the same page that contains the vertical tabs named 'Troubleshooting', 'How to' and so on and none of the links - not even under 'options to support more' - led to a Basic downloadable driver package. In fact, none of them leads to a downloadable driver package of all kinds. The most that I could find is that package Wizard driver installation that attempts to download the package that I am not interested in-oh and a few mentions in the KB articles downloadable driver packages.

  I also tried "Printer Setup, Installation" & Setup and then variously "Installation, install & connect printer ' and 'Software updates' & Firmware, which none offer a downloadable package.

  This used to work perfectly fine a few months ago, but now I'm getting round on the same page over and over again. I can not find the basic driver or the software for the printer more.

  Where can I find the basic driver package (used about 30 MB in size) in order to avoid the crapware included in the package (130MO) "full feature" more great who gets automatically downloaded to an unknown destination on my hard drive using this driver installation wizard. It's my PC and I want to be the one who decides in which runs when and how. Now I can try to track down the location of download using ProcMon and what not, but it would give me is this package 'feature complete' with a bunch of crapware added on strictly necessary. How to get the base driver package?

  Thank you!

  Never mind. Fascinating, the "Download drivers" link under the Support tab at the top leads to a different page that the link "search for drivers' next to my question posted .

  Both methods require enter the name of the model (after picking "Printers" in the first case) in a similar way, but the former led in circles on the same page with no possibility to download, while the latter one immediately takes me to the downloads, I was looking for.

• Data block in the procedure and the Base Table

  Hello
  
  I hava a form with a block of master and detail. The fields in the Master block are
  
  Emp_name, DateOfJoin, salary... I created this block with the procedure with a Ref Cursor, becaue the user
  want to load the data based on the conditions it enter for example: DateOfJoin < = Sysdate and DateOfJoinn July 1, 2008 "."
  SO I created a block of control with the fields name, MiddleName, LastName, of DateOfJoin, in DateOfJoin, the salary, and when the user clicks on the data loading
  button, I load the data to block under these conditions using the procedure.
  Note that in the Emp_Name table if a field, but contain first name, middle name, and last name with a separate space.
  
  My needs is, is there any method to develop this master block with a database table, so that if the user want to select it
  data based on other conditions, it can enter directly into the block of data using Qry enter and run Qry, also if he wants to
  Select data based on the top-level asked the search criteria, it will click Load Data.
  I hope that in this case, when the user selected the Load data button, I need to change the data source to the Type of procedure and set the source of data on behalf of the procedure name.
  
  Is there any other easy solution flor this
  
  Thanks in advance

  not sure if I get your needs. I understand the following:
  You have a block based on table emp, containing a DateOfJoin column and the user should be able to enter into a 'complex' where denomination.

  To do this, you do not have to base block one a procedure or ref_cursor. Two possibilities:

  Add two fields more directly in the block that are non-base of data-objects of type date fixed query on yes and let the user to enter a date range in these columns. In the accumulation of PRE-QUERY-trigger a WHERE condition by using the value in this field:

  something like:

  DECLARE
    vcMin VARCHAR2(10):='01.01.1700';
    vcMax VARCHAR2(10):='01.01.2999';
  BEGIN
    IF :BLOCK.DATE_FROM_JOIN IS NOT NULL THEN
      vcMin:=TO_CHAR(:BLOCK.DATE_FROM_JOIN, 'DD.MM.YYYY');
    END IF;
    IF :BLOCK.DATE_TO_JOIN IS NOT NULL THEN
      vcMax:=TO_CHAR(:BLOCK.DATE_TO_JOIN, 'DD.MM.YYYY');
    END IF;
    SET_BLOCK_PROPERTY('BLOCK', ONETIME_WHERE, 'DATEOFJOIN BETWEEN TO_DATE(''' || vcMin || ''', ''DD.MM.YYYY'') AND TO_DATE(''' || vcMax || ''', ''DD.MM.YYYY'')');
  END;
  

  Another option:
  together, the length of the request of the DATEOFJOIN field to say 255, then the user can directly enter #BETWEEN fromdate AND fodate in the field.

• Dynamic context menu and the base security

  Hi gurus,

  I have a case, where I want to put the role and the menu access on the database.

  I saw edwin biemond tutorial to create a navigation page that is based on the database role.

  but in this tutorial, I realize that still can access another page that are not show in the page navigation (menu)

  so, how can I conduct the user that is not authenticated to access multiple page (based on the role and the database menu) to the default page (home page)

  for example.

  userJUW have as a turnover.

  sales role have access only to the menu: salesInput, salesReport*.txt

  When userJUW tried to access the other example of menu: productReport (the menu access others via by typing the url in the url bar of the browser), then userJUW must be informed that he is not authenticated to access the productReport page and then redirect to the home page.

  pls throw some light

  Thank you

  Hi Juw,

  Yes, you can do this using the API OPSS.

  Develop with the user and role API

  Identification information, policies and identities of understanding

  I've worked before, but I got an LDAP authenticator based in weblogic. I don't know if OPSS requires that you have an LDAP authenticator however. But if everything is OK you can allow users and assign roles programmatically and they persist in your provider.

  Another option but less attractive and is based on your analysis and solution architecture could be as you said to begging, having roles in DB, and questioning the roles once the user connects and assign programmatically according to the information in the DB.

  https://oralublog.WordPress.com/2013/11/17/ADF-tutorial-how-to-map-roles-to-user-when-logging-in/

  You should do some homework this weekend hehe have fun.

  Concerning

• Windows and the Base filtering lack Windows, the Firewall Security Center services

  Original title: I have a problem with my computer.

  In my computer, the windows Security Center service, windows firewall and filtering basic service is missing. I know they are very important from another post on this forum.

  So, I'm worrying about my willingness to computer infected with malware caused by this problem. What should I do?

  Please help me to solve this.

  I use windows vista Home premium SP1 32-bit, and I use Avira free antivirus.

  Any help will be appreciated.

  Kind regards

  Adilan

  I try to do a repair of the system with one or the other repair disk or installation disk.  If you don't have either, you can do a repair disc by clicking on start-> Control Panel-> backup and restore by clicking on create a system repair disc.  If this does not work, you may need to restore your computer to factory settings.  I would back up all the important files now while you still can because you don't really know how damaged your computer is.

  Good luck.

• Issue of API browser opening and the basis of the location.

  Finally got my file COD signed and is now able to open the browser which is great.

  Now, when the browser opens, it goes to the Blackberry website.  However, when I close the browser to go back to my home screen, I notice that it keeps open the browser.  I had to press the home button.  Here is the snippet of code to the browser.  I developed this in JDE 4.7.0, and I test it on my "BOLD".

  try {}
  Download the default sessionBrowserSession
  Private private = Browser.getDefaultSession ();
  Now launch the URL
  browserSession.displayPage ("http://www.frugalytics.com/");
  The next line is a work around for the issue in
  version 4.2.0
  browserSession.showBrowser ();
  }
  catch (Exception e) {}
  Alert B = new alert ("call browser Error", e.getMessage (), null, AlertType.ERROR);
  b.setTimeout (10000);
  display.setCurrent (b);
  }

  I open the browser according to the thread "run()" method  Not sure if this may have something to do with it.  I also have another MIDlet, as I am just learning, he uses the JavaME location database API.  I used this same excerpt on other devices and it is able to get the latitude and longitude.  But to test this on my "BOLD", I don't get the initial lat and long.  The extract is below and it is also called in a thread "run()" method.  Not sure if there is something different I have to do.  Any help is greatly appreciated.  Thank you.

  try {}
  criteria = new Criteria();
  criteria.setPreferredResponseTime (20);
  criteria.setVerticalAccuracy (500);
  criteria.setHorizontalAccuracy (500);
  LP = LocationProvider.getInstance (criteria);
  Loc = lp.getLocation (20); 10 seconds
  CdR = loc.getQualifiedCoordinates ();
  If (cor! = null)
  {
  Use the information to contact information
  This.LAT = cor.getLatitude ();
  This.longi = cor.getLongitude ();
  Alert B = new alert ("Getting location:", this.lat + ":" + this.longi, null, AlertType.INFO);
  b.setTimeout (10000);
  display.setCurrent (b);
  }
  else {}
  If (lp.getState () is lp. TEMPORARILY_UNAVAILABLE) {}
  Unable to reach the current place of residence
  Alert B = New Alert ("Error location", "temporary location Unavailable", null, AlertType.INFO);
  b.setTimeout (10000);
  display.setCurrent (b);
  }
  } //else
             
  } //try
  catch (Exception e) {}
  Alert B = new alert ("location Exception Error", e.getMessage (), null, AlertType.ERROR);
  b.setTimeout (10000);
  display.setCurrent (b);
  } //catch

  "when I close the browser to go back to my home screen, I notice that it keeps open the browser" what it means when you press the button close the browser and it goes back to your home screen and it is dispalying the browser all again?

  For the location in function... Have you tried with default criteria.

• HP Officejet software 4620e Windows XP SP3 and the base driver installation problems

  I am running Windows XP SP3 and installed the software the printer HP Oficejet 4620e and, when it is finished installing, all I see are two pages of text of the code.  In addition, the printing software disables my wireless network connection and I need to fix the adapter wireless network at regular intervals.  I uninstalled the printer software and installed 4620e HP basic driver software that HP offers as an alternative for computers that cannot use the full package.  I get the same results with the HP basic driver package 4620e as with the complete software package (two screens of text of the code).

  Please help.

  _________________________________________________________
  JOHN

  The reason why the pages are open as code is because something has changed to the association of files of these types of files.  The discussion below describes the problem on a 6520 and offers a solution for it.  Try this patch and let me know what happens.

  HP Photosmart 6520 "printer assistant" will not work

  The problem with the printer lock up your computer is caused by ink alerts defined as always, and because the analysis of the functionality of the computer is turned on.  The document below will guide you through fixing the problem.  Let me know what happens.

  Printer loses the network connection in Windows XP after the computer is turned on for four to 12 hours

• display of the backup of the coverage and the replacement of base for Inspiron 13 7348

  Hello

  My Inspiron 13 7348 (tag servic 4w6yj52) was damaged.

  one of the two hinges between the display unit and the base Assembly was detached from its cover and plastics parts are ground (1. See BackCover, 2. base Assembly).

  1. I uninstalled the cover from the base

  2. I uninstalled the BackCover display.

  Then, I could clearly see the damaged parts

  I opened a request for service on the Dell site. then I was talking to the Sales Department of party list.

  I send them pictures of uninstalled parts (1 & 2)

  I asked Dell to have the prices for these two parts.

  I wanted to buy these two 'display BackCover & base' (with some attachments on them)

  Surprisingly they force me to buy the whole display which includes the SCREEN and costs about $ 200

  The BackCovly of the display has been uninstalled easily, with the user manual guide of the doc.

  I failed to convince DELL the display cover, should be sold separately

  the laptop works well, with the ability to move around the screen.

  Help, please

  Etofach

  You already said that Dell does not separately sell the cover.

  Others:

  www.waresphere.com/.../Dell-Inspiron-13-7347-7348-LCD-back-cover-5wn1x.html

• Loss of system sounds and the internet, speakers pass test.

  I have seen this issue a couple of times for its complete loss, but only once for my specific problem.  I am running Windows Vista 32 - bit OS with speakers Realtek High Definition Audio on a HP Pavilion Media Center m7760n.  I have run the diagnostics on my speakers and that they work properly.

  Here's my question:

  Lost computer system sounds and flashplayer/internet despite the audio device in place and work properly.  I still have sound when playing Windows Media Player and iTunes, so it doesn't seem like a problem of device or driver, although I did uninstall and reinstall the driver.  I also performed some diagnostics on the speakers and in the test that they did play sounds, but they haven't played the system sounds in the sounds/system folder.  Another strange appearance is the presence of the sound of my PC, an alert tone, I don't remember having heard it before and cannot be bound.  These are the programs that have been installed around the time I lost sound: Windows Update, Package of device driver of network adapters Apple and Serial Bus controller device driver Package universal of Apple, Inc.  This computer has always run Vista, so is not upgrade, and I don't think it's a Service Pack, it could only be that of the update, so I don't know if these answers would really help me.  I searched on Google, CNet, HP and the basis of knowledge of Windows without success.

  Here is a link to a question from CNet which reflects mine, but relates to the execution of a registry cleaner, that I did not.  http://forums.CNET.com/5208-12546_102-0.html?ThreadId=345265

  I read on one of my research about it being a registry with Flash or a missing codec problem, but it wants me to download K-Lite codec pack which I don't know that I need.

  I run a restore if there is no available answer, but it would be good to know what the problem is.  I can't be the only one with this problem, if there is someone out there who knows how to solve this problem, your help would be greatly appreciated!

  Terri,
  If this problem started when you downloaded the updates listed in your first post, you tried to remove these updates to see if the problem goes away?  What are the Apple updates that you noted in your post - what kind of Apple devices you have installed?  And what Vista update - what is has been downloaded just before this problem?  Just try to identify what it is a very strange problem with it only affects some sounds, but not all.  I know that some Vista updates can return drivers for Windows by default, crushing the drivers from the manufacturer, so you could check and make sure you have the latest drivers from the manufacturer and not the default Windows drivers.  Also check your templates of sounds in the control panel.  Try selecting different models of sounds to see if any of them will play sounds.  As a first step, you said that the sound works with Media Player and iTunes, but in your last post, you said that it gives you an error when you try to play a CD.  What is the exact error and what program are you trying to use to play the CD?  I know that you do not want to do the system restore, but you may need.

  Here's one thing to try before you perform the restore:
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  LST know us if this has been helpful for you and how we can be of further assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• For a laptop for the loading of images from LR on travel - is 1366 x 768 screen enough and the size of the HARD drive?

  I have big PCs and giant screens for the home edition, but for travel I am looking for a laptop for image loading on the road and the base LR sorting and marking of displacement.

  2 questions for your experiences, the regulars of the forum, in my opinion:

  1 1 TB HDD with an external 1 TB HARD drive as backup - rather than 256 or 512 GB SSD IB (reasons of $$$ and also to load all my images on a trip)

  2. 14-inch screen 1366 x 768 or similar instead of full HD ($$$ reasons and because I tell myself that I can zoom in to check the focus on this screen very well)

  Your comments and your experiences?

  Oz

  Sorry for not giving you enough information

  Cameras include a D800. Last long trip saw about 600 GB of images that I kept on a laptop for about 100 GB of capacity, then on a portable HARD drive (with an another portable HARD drive for backup). I have not run LR on a laptop connected to hard drives external and thought that it would be better all around having large drive onboard

  Computer laptop features include an i7, with a graphics card to support enough treatment LR for the process of cataloguing "on the trip.

• How to compare the length of the data to a staging table with the definition of the base table

  Hello
  I have two tables: staging of the table and the base table.
  I get flatfiles data in the staging of the table, depending on the structure of the requirement of staging of the table and the base table (length of each column in the staging table is 25% more data dump without errors) are different for ex: If we have the city long varchar 40 column in table staging there 25 in the base table. Once data are discharged into the intermediate table that I want to compare the actual length of the data for each column in the staging table with the database table definition (data_length for each column of all_tab_columns) and if no column is different length that I need to update the corresponding line in the intermediate table which also has an indicator called err_length.
  
  so for that I use the cursor c1 is select length (a.id), length (b.SID) of staging_table;
  c2 (name varchar2) cursor is select data_length all_tab_columns where table_name = 'BASE_TABLE' and column_name = name;
  But we get atonce data in the first query while the second slider, I need to get for each column and then compare with the first?
  Can someone tell me how to get the desired results?
  
  Thank you
  Manoi.

  Hey, Marco.

  Of course, you can set src.err_length in the USING clause (where you can reference all_tab_columns) and use this value in the SET clause.
  It is:

  MERGE INTO  staging_table   dst
  USING  (
         WITH     got_lengths     AS
                   (
            SELECT  MAX (CASE WHEN column_name = 'ENAME' THEN data_length END)     AS ename_len
            ,     MAX (CASE WHEN column_name = 'JOB'   THEN data_length END)     AS job_len
            FROM     all_tab_columns
            WHERE     owner          = 'SCOTT'
            AND     table_name     = 'EMP'
            )
       SELECT     s.ename
       ,     s.job
       ,     CASE WHEN LENGTH (s.ename) > l.ename_len THEN 'ENAME ' END     ||
            CASE WHEN LENGTH (s.job)   > l.job_len   THEN 'JOB '   END     AS err_length
       FROM     staging_table     s
       JOIN     got_lengths     l     ON     LENGTH (s.ename)     > l.ename_len
                           OR     LENGTH (s.job)          > l.job_len
       )     src
  ON     (src.ename     = dst.ename)
  WHEN MATCHED THEN UPDATE
       SET     dst.err_length     = src.err_length
  ;
  

  As you can see, you have to hardcode the names of the columns common to several places. I swam () to simplify that, but I found an interesting (at least for me) alternative grouping function involving the STRAGG user_defined.
  As you can see, only the subquery USING is changed.

  MERGE INTO  staging_table   dst
  USING  (
         SELECT       s.ename
         ,       s.job
         ,       STRAGG (l.column_name)     AS err_length
         FROM       staging_table          s
         JOIN       all_tab_columns     l
        ON       l.data_length  < LENGTH ( CASE  l.column_name
                                            WHEN  'ENAME'
                                  THEN      ename
                                  WHEN  'JOB'
                                  THEN      job
                                     END
                             )
         WHERE     l.owner      = 'SCOTT'
         AND      l.table_name     = 'EMP'
         AND      l.data_type     = 'VARCHAR2'
         GROUP BY      s.ename
         ,           s.job
         )     src
  ON     (src.ename     = dst.ename)
  WHEN MATCHED THEN UPDATE
       SET     dst.err_length     = src.err_length
  ;
  

  Instead of the user-defined STRAGG (that you can copy from AskTom), you can also use the undocumented, or from Oracle 11.2, WM_CONCAT LISTAGG built-in function.

• Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column determines if the entry price column is subtracted from the price of output column or output subtracted

  Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column; Determines if the entry price column is subtracted from the price of output column (buy) or subtracted from (Sell) entry exit. Thank you for your help

  Hi B',.

  Buying and selling in column B

  Price of entry in column c.

  Exit in column D price

  Formula (and outcome) in column E

  If the column will B always contained 'Buy' or 'Sell', it works. It is default to a calculation of 'sell' if sale or has been specified.

  E2: = IF (B = "Buy", D - C, C - D)

  If you want to delay the calculation until the amounts entered in C and D, use this version:

  E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, C - D) ")

  If you want to delay the calculation until all three ducks are on a line (B contains buy or sell, C and D contain both data), use this version:

  E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, IF(B="Sell",C-D,) "" ")))

  Third version used in this table.

  

  Kind regards

  Barry

• PXI-5112 with XP, LV 2010 (and the determination of review)

  Just found an old PXI-5112. I could do great with this card things if I could make it work.

  When I first plugged it to my PXI chassis, it was detected in MAX as a device of NOR-DAQ traditional with the latest version of NOR-DAQ traditional (7.4.4). However, when I tried to open a test Panel on this subject, I received a message that the device "failed the test". If I open the Panel test in any case, I get an error-10840 (soft error).

  I called OR support on this subject and the engineer found this article in the knowledge base for me:

  http://digital.NI.com/public.nsf/allkb/E956B50E8E0FC44E86256B030062CA2E

  I then tried to determine my Board review. I read the first issue I've found which corresponded to the model. It was on a sticker on the side rear of the Council and read "702864 A-01". This vignette, we determined that my Board is A revision.

  I tried following the advice that knowledge base article and install OR-DAQ 6.7.0 and 1.6 NO-SCOPE. With this combination, I can load up the SCOPE screws with LV 8.2.1, but when I try to run an example VI on my device, "DAQ::6", it fails to initialize the jury with "method or function not defined", or something like that. With NEITHER-DAQ 6.8.1 and 1.6 NO-SCOPE, I get a lot of impossible to find DLL errors attempting to perform the SCOPE of EIS. With NEITHER-DAQ 7.4.4 and 1.6 NO-SCOPE, I get the same old "Undefined function or method. If I try to run the VI on the wrong channel, like "DAQ::1", I get 'Device does not exist', he seems to recognize the device, just not being able to do something with it.

  I'm about to give up on this, but I just realized that there are FIVE different numbers printed on my Board which match the pattern in this knowledge base article.

  White sticker on chip on the back: 702864A - 01 Copyright 2000 NI

  Yellow sticker on chip on the back: 703058A - 01

  Printed in black on the login Panel: C 186030-01 REV1

  Printed in white on the back of the PCB: 184196E-01

  Printed in white on the front of the PCB: ASSY184194E-01

  There is also a label with bar code with C3297D, which I think is the serial number. The guy NOR tried searching but couldn't find anything.

  An interesting thing in particular on these numbers is that the ASSY184194E-01 contains the same exact number that is given as an example in this article in the knowledge base for a tray of Rev E: 184194E-01

  I have two questions, if anyone can help:

  1. does anyone here have a PXI-5112, Rev A or one E, in no case to work in Windows XP?

  2. which one of these numbers should I trust to identify revision of my Board? It seems like that might be either A, C or E.

  Thank you!

  Max

  Hey Maxwell,

  You are right that the serial number is C3297D, and the part number for the Board should be 184194E-01, indicating that it is revision E and is a module of 16 MB/ch PXI-5112. When you got the error, you said you had traditional-DAQ 7.4.4, but I'm not clear what version of NOR-SCOPE, you had. OR-SCOPE has been installed in the system at this time?

  If you plan to run this Board in LabVIEW 2010 on a Windows XP-based computer, you need to install OR-SCOPE 3.6.2 in order to get all the support you need. As long as you are running a 64 bit OS, the PXI-5112 should function normally. OR-SCOPE 3.6.2 is the oldest version of the driver that will support LabVIEW 2010 (it will support LabVIEW 8.5.1 and more later). Seems to me that previous errors, you have been doing are the result of incompatibilities between versions of your different software/driver. If you install this latest version of NOR-SCOPE, it must include all the right support you need (traditional-DAQ 7.4.4, OR-SCOPE 3.6.2 support for LabVIEW 2010, NOR-DAQmx 9.1.5, MAX 4.7, etc.). Unfortunately, the only way to get NO-SCOPE 3.6.2 is through the CD August 2010 device drivers (DCD). Once you start the installation, you can select always right to install NO-SCOPE and not the rest of the drivers in the package if you do not want. Of course, having the latest updates of all might not be a bad idea, or if you want to just install everything.

  Moreover, all the part numbers you listed (except the last) are parts numbers for specific elements of the PXI-5112 (Panel connection, the real PCB, CPLD chip, etc.). The assembly number is the one you are looking for. Sorry for the confusion.

  Best regards!

• Images of base and the retention policy

  How often should a kernel take images of basic officer? For some reason, I was under the impression that base image that is happening, then EACH snapshot after it is progressive, and they all get just rolled in the other when the time comes. I have machines here with 3 or 4 images of base in recent months. Some seem to match with my retention policy, and others do not.

  Someone has an idea?

  You answer @itcaswg post:
  @itcaswg said "why it would trigger a full after a 'dirty '?" I think it would just dump the partial and take another differential from the beginning.

  So when your taking a backup create us a log, which is replaced each snap, in the System Volume information file, this is where we consider what has changed since the last backup and what channel we are linking to the heart. If the officer was in the middle of a write to this file and a crash occurs the log file might be damaged. This would make it impossible for the officer to determine what has changed. So, I set off a baseline plan to repair the chain.

  @itcaswg said «...» I guess that number three is not a problem unless the disk is full. right? »

  Yes and no. Permissions or GP can play in this trigger. Also when you configure you differential interval and place all the volumes on the same time, all volume lock in that time as a job. The partition of the RPS is relatively small and can fill. This can trigger the basis for the entire machine as all volumes are connected by the work of the interval. Often RPS do not even have a drive assigned to often most watched his letter but he too has a SVI folder and is clipped like any other drive.

  In addition, food for thought, your retention applies only at increments up to your most recent base line. Anything before that is ignored and must be cleaned manually.