MGCP DChannel is out-of-service

Similar Questions

• Satellite A300D - Webcam is turned off or out of service

  Hello world
  I have a problem with the webcam. It worked fine, but not when I run the app, it says:-"the device is switched off or out of service. Check the settings.
  I already reinstalled all the drivers on the official site, removed and installed again - nothing has worked. OS - Windows Vista 32.
  It's strange when you use SKYPE micro works!) The webcam may not be intended.

  What should I do?

  Thank you

  Hey,.

  That s really strange usually reinstall the webcam software should work

  You use the version of Vista preinstalled Toshiba?

  You can also try a program of cleaning for Windows like CCleaner. It s really recommendable program that is easy to use and freeware. You can get it here:
  http://www.Piriform.com/

  Choose cleaner and registry options to clean your system. Maybe it works :)

• My laptop has been out of service for Windows 10 preview and free offer, but now work. Is it possible to get the upgrade for Windows 10 free?

  My laptop has been out of service for Windows 10 preview and free offer, but now work. Is it possible to get the upgrade for Windows 10 free?

  Hello

  You buy Windows 10, as there is no free upgrade to Vista 10.

  https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

  Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

  http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

  How to buy Windows 10:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• VOIP Monitor is OUT of SERVICE on UCCX - 9.0.2 - 9.0.2.11001 - 24

  Hi All - Recently updated UCCX up version 9.0.2 in CRAIG configuration, where VOIP MONITOR is OUT of SERVICE on the node of the Subscriber.

  Restarted cluster - No go

  Any idea?

  1492016: 24 July 14:53:10.175 GST % MIVR-SS_VOIPMON_SRV-3-operation for the VOIP_OPERATION_ERROR:VOIP subsystem error: Module Name = LrmVoipManager.recovery, A specific description for a returned fail read OPEN_CONF msg = trace is null, Exception =
  1492017: 24 July 14:53:10.773 GST %MIVR-CFG_MGR-7-UNK:BSSession:heartbeat::BSSocket.nextInvokeId=130945
  1492018: Jul 24 14:53:10.774 GST %MIVR-CFG_MGR-7-UNK:BSMessageWriter-1.writeMessage-> about to write the message bootstrap = HEARTBEAT_REQ [length =-1, invokeId = 130945]
  1492019: 24 July 14:53:10.814 GST %MIVR-CFG_MGR-7-UNK:BSMessageReader-1.run-> message read: HEARTBEAT_CONF [length = 4, invokeId = 130945]
  1492020: 24 July 14:53:15.777 GST %MIVR-CFG_MGR-7-UNK:BSSession:heartbeat::BSSocket.nextInvokeId=130946
  1492021: Jul 24 14:53:15.777 GST %MIVR-CFG_MGR-7-UNK:BSMessageWriter-1.writeMessage-> about to write the message bootstrap = HEARTBEAT_REQ [length =-1, invokeId = 130946]
  1492022: 24 July 14:53:15.818 GST %MIVR-CFG_MGR-7-UNK:BSMessageReader-1.run-> message read: HEARTBEAT_CONF [length = 4, = 130946 invokeId]
  1492023: 24 July 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-operation error VOIP_OPERATION_ERROR:VOIP subsystem: Module Name = LRMConnection.readMSG: lrmHost: 172.17.16.10, lrmPort: 3000, is a specific description for track = error:, Exception = java.io.EOFException
  1492024: 24 July 14:53:20.195 GST %MIVR-SS_VOIPMON_SRV-3-EXCEPTION:java.io.EOFException
  1492025: 24 July 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at java.io.DataInputStream.readInt(DataInputStream.java:375)
  1492026: 24 July 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.lrm.io.CRSLRMInputStream.readINT(CRSLRMInputStream.java:211)
  1492027: 24 July 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.lrm.io.CRSLRMInputStream.readMHDR(CRSLRMInputStream.java:356)
  1492028: 24 July 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.VOIPMonitor.subsystem.LRMConnection.readMSG(LRMConnection.java:156)
  1492029: 24 Jul 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.VOIPMonitor.subsystem.LrmVoipManager.recovery(LrmVoipManager.java:444)
  1492030: 24 Jul 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.VOIPMonitor.subsystem.VoipServerHeartbeatThread.run(VoipServerHeartbeatThread.java:50)
  1492031: 24 Jul 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: to com.cisco.executor.impl.ExecutorStubImpl$ RequestImpl.runCommand (ExecutorStubImpl.java:690)
  1492032: 24 July 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: to com.cisco.executor.impl.ExecutorStubImpl$ RequestImpl.run (ExecutorStubImpl.java:486)
  1492033: 24 Jul 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: to com.cisco.executor.impl.ExecutorStubImpl$ RequestImpl.run (ExecutorStubImpl.java:762)
  1492034: Jul 24% 14:53:20.196 GST MIVR-SS_VOIPMON_SRV-3-EXCEPTION: to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:776)
  1492035: 24 Jul 14:53:20.196 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: to com.cisco.executor.impl.PooledExecutorStubImpl$ $1 WorkerImpl.run (PooledExecutorStubImpl.java:99)
  1492036: 24 July 14:53:20.196 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: to com.cisco.util.ThreadPoolFactory$ ThreadImpl.run (ThreadPoolFactory.java:853)
  1492037: 24 Jul 14:53:20.196 GST % MIVR-SS_VOIPMON_SRV-3-operation for the VOIP_OPERATION_ERROR:VOIP subsystem error: Module Name = LrmVoipManager.recovery, A specific description for a returned fail read OPEN_CONF msg = trace is null, Exception =
  1492038: 24 Jul 14:53:20.781 GST %MIVR-CFG_MGR-7-UNK:BSSession:heartbeat::BSSocket.nextInvokeId=130947
  1492039: Jul 24 14:53:20.781 GST %MIVR-CFG_MGR-7-UNK:BSMessageWriter-1.writeMessage-> about to write the message bootstrap = HEARTBEAT_REQ [length =-1, invokeId = 130947]
  1492040: 24 July 14:53:20.828 GST %MIVR-CFG_MGR-7-UNK:BSMessageReader-1.run-> message read: HEARTBEAT_CONF [length = 4, invokeId = 130947]
  1492041: 24 Jul 14:53:25.784 GST %MIVR-CFG_MGR-7-UNK:BSSession:heartbeat::BSSocket.nextInvokeId=130948
  1492042: Jul 24 14:53:25.785 GST %MIVR-CFG_MGR-7-UNK:BSMessageWriter-1.writeMessage-> about to write the message bootstrap = HEARTBEAT_REQ [length =-1, invokeId = 130948]
  1492043: 24 July 14:53:25.825 GST %MIVR-CFG_MGR-7-UNK:BSMessageReader-1.run-> message read: HEARTBEAT_CONF [length = 4, = 130948 invokeId]

  LRM keeps the value of active LRM in the form of a key in the LDAP database(Calabrio's). And all the services/clients use this key to determine which server LRM, they have to connect to.

  Then when the VoIP LUN SS is looking for this key in it is the own Server LDAP database and is unable to connect to this server in the key, this means that it is either the IP address of the IP address of inactive server(Slave's) LRM or they have problems of network/firewall connection between the two servers.

  Could be several reasons such as questions in the data base LDAP, no update of CVD, or simple connectivity problems.

  For the moment, do the following step by step:

  1) Restart the LRM service on the Master Node(Node 1)

  2) Restart the LRM service on the Slave Node(Node 2)

  3) Restart the LDAP Monitor on the Master Node

  4) Restart the LDAP Monitor on the Slave Node

  5) Restart the CCX Engine on the Master Node. (Note, this will failover the mastership from the Node 1 to Node 2)

  6) Once the Engine is up on Node 1, restart the CCX Engine on the Node 2 to fail the mastership back to Node 1

  This should ensure that the key to the address of the Active Server LRM is reset in the nodes (no problem in cardiovascular disease, on the other, you must restart the server after you complete the steps above considering).

  HTH

  Prashant

  Please evaluate the useful messages and mark resolved threads as replied to drive the content more far.

• IPCC "the extension of the agent is out of service."

  We use IPCC 4.0 (3) _Build080, we have a new user in the system like everyone else. When this user tries to enter a ready state in the agent's Office, he gets the following error:

  13:16:20 cannot go to the ready state, while the phone is out of service. Other status changes are possible.

  --------------------------------------------

  13:16:20 that the extension of the agent is out of service.

  Ready state change and call control operations can be performed.

  I have the same problem occasionally. I use version 3.5. (2) and the solution for me was that I have deassociated users with user rm extensions and the agent itself. Then the extension associated with my id and then logged on to office and go into the ready state without any problem on the affected expansion.

  After I did I associate the extension with the rm user and the agent itself again, and it worked every time.

  I have no idea but why this happens, but it might have something to do with replication / connectio nbetween systems of IPCC and CCM.

  I hope that helps you!

• Autonomous CVP w Reporting. VB Admin out of Service

  CVP 4.1

  Autonomous with reporting model:

  1 GW 3845

  1 MCS 7845 call + VxML Server

  1 MCS 7845 Reporting Server

  1 MCS 7835 OPerations Console

  1 studio of MCS 7835

  I registered online PAK codes for the

  -Server-Sw and applied the ICA on the server to call

  -CVP 20 VxML Ports on the VxML Server 4.x

  -Reporting Prem lic on the report server

  using the operations Console

  Also, added the GW and transferred the CVPSelfService.tcl, the CVPSelfServiceBootStrap.vxml and the CriticalError.wav to the same using the Console.

  Call the server, server VxML and Reporting Server are UP on the Console.

  Have restarted the combo CallServer + Vxml Server, but the speech browser shows out of Service and tries to contact the GK.

  But it is independent, there is no GA, why VB is trying to get a GK?

  I didn't go any single on the VB Admin command, as the configuration guide has not said to me to do.

  First Question:

  1. While installation was SVC Call Server I supposed to select H.323 as Autostart CVP VB services at startup, no. Sytem restart on error display & CVP VB window on startup, or NOT?

  Because I did, but then I added call server in the Console of the operation - I did not any service at all.

  2. If the answer to the above question is that Yes, I had to select H.323 Services/Start VB window etc. during the installation options. Then what don't get me, why the VB is out of service and it is looking for a GA?

  Kindly help.

  No voice browser is required.

  Kind regards

  Geoff

• site web stock. Adobe is out of service

  Adobestock.com is out of service.

  

  Hello

  Please see error 400

  Hope that helps!

  Kind regards

  Sheena

• The Web Cache instance is out of service every hour

  Hello
  I have 11.1.0.1 on Solaris 10 SPARC EM grid control. All the patches in the applied SGD.
  I have problem with monitoring application 10.1.0.1 on Solaris 10 x 86 Server. Agent 11.1.0.1.
  emagent.TRC:
  2011-01-11 10:27:57, 745 ERROR Thread-440 engine: [Cache oracle_webcache, reports.sun - rep_Web, ESI_HIST]: nmeegd_GetMetricData failed: java.lang.NullPointerException
  2011-01-11 10:27:57, collector of Thread - 440 WARN 745: < nmecmc.c > output error. Error: java.lang.NullPointerException
  
  I get alerts every hour with "the Web Cache instance is down".
  Help, please.

  If the agent gets really restarted several times a day (every hour for example) which is certainly not expected behavior...

  I found this - perhaps it helps:
  (you should check your mentioned errors log files)

  The 11g EM Agent restarts at frequent intervals with the following entries in the /sysman/log/emagent.nohup file of

  emagent started successfully
  URLTiming: Using SunX509
  Exception in thread "oracle.dms.collector.GatherThread@15000".
  java.util.ConcurrentModificationException
  to java.util.HashMap$ HashIterator.nextEntry (HashMap.java:793)
  to java.util.HashMap$ EntryIterator.next (HashMap.java:834)
  to java.util.HashMap$ EntryIterator.next (HashMap.java:832)
  at oracle.dms.collector.Gatherer.cleanup(Gatherer.java:235)
  at oracle.dms.collector.GatherThread.run(GatherThread.java:85)
  -Recycling process. VMSize is 6385.46875 MB increased 6327.09375 MB
  past 3 -.
  -Thu Jul 15 02:14:08 2010::Received asks to restart EMAgent: 12200
  -----
  -Thu Jul 15 02:14:08 2010::Stopping EMAgent: 12200 -.
  (pid = 12200): emagent now go out normally

  The new start above occurs when the virtual memory consumed by the Agent have crossed the line and that's why he is automatically restarted by the daemon process.

  -The /sysman/log/emagent_fetchlet.trc also shows a lot of errors related to the JNIFetchlet:

  [nmefmgr_getJNIFetchlet] Warn emd.fetchlets getMetric.387 - oracle.sysman.emSDK.emd.fetchlet.FetchletException:
  oracle.sysman.emSDK.emd.fetchlet.FetchletException: java.io.IOException:
  Cannot connect to any host
  oracle.sysman.emSDK.emd.fetchlet.FetchletException:
  oracle.sysman.emSDK.emd.fetchlet.FetchletException: java.io.IOException:
  Cannot connect to any host
  to
  ..............
  [nmefmgr_getJNIFetchlet] WARN JMX.generic logp.251 - IOException: can not connect to the target with
  serviceURL=service:jmx:t3s://agentmachine.domain:7101/jndi/weblogic.management.mbeanservers.runtime for weblogic_j2eeserver:server metric:
  Unable to connect to any host Cause: javax.naming.NamingException: unable to connect to any host [root exception is org.omg.CORBA.COMM_FAILURE: vmcid:]
  [Minor SUN code: 203 out: No.]

  -Historical data for the "use of memory resident (%) 'or' memory use virtual growth (%) ' parameters for this Agent show large memory
  use over the period, when the Agent has increased.
  These details are accessible from the configuration of Console grid-> Agents-> click on the name of the Agent-> click on 'All settings'-> Expand ' Agent process
  Statistics-> click on the "use of memory resident (%) 'or' memory use virtual growth (%) '.

  Cause
  This issue has been studied in the Bug 9829732: AREA of SGD AGENT 11.1.0.1 RUNNING ON CONSUMED the UPPER MEMORY

  Using pmap to check the memory usage:

  $ ps - ef | grep agent11g
  PMAP $

  Returns a result as below:

  ....
  00002aaab32e0000 rwx 21248-[anon]
  00002aaab47a0000 rwx 64768-[anon]
  00002aaab86e0000 125632 rwx-[anon]
  00002aaac0190000 1884160 rwx-[anon]
  00002aab33190000 rwx 62784-[anon]
  00002aab36ee0000 942080 rwx-[anon]
  .....

  It was found that the majority of virtual memory has been consumed by these [anon] blocks.

  It was found that the memory of Java used by the Agent when using JNI calls must be tuned. This may be necessary when the large number of "java" such as Weblogic servers targets is monitored by the Agent.

• Why my cpu running the Adobe Flash player out of service?

  The Flash player will run once, then it rurns out tension.

  What web browser do you use?

  If you are using Internet Explorer, try the following:

  Click Start, type: Internet Options
  Press enter
  Select the "Advanced" tab
  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Download and reinstall Adobe Flash Player:

  Adobe - install Adobe Flash Player

  Troubleshoot installation of Flash Player for Windows
  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance
  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller
  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum
  http://forums.Adobe.com/community/webplayers/flash_player

• CiceroUIWndFrame unresponsive when WIndows XP is blocking out of service.

  What is "CceroUIWndFrame" and why do I always get the message "CiceroUIWndFrame" does not respond when I try to shutdown my computer XP? Operatng a computer system is Windows XP Professional, SP3, 32-bit.

  What is "CceroUIWndFrame" and why do I always get the message "CiceroUIWndFrame" does not respond when I try to shutdown my computer XP? Operatng a computer system is Windows XP Professional, SP3, 32-bit.

  What (if any) version of Microsoft Office that you have installed?  It is fully patched?

  When was the last time you 'cleaned' and performed maintenance on this computer?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  
  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  
  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 15 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  
  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Diskeeper pointed out my service v002 has only ten percent of available memory, and causes a big slow down. Anyone know where to find?

  Hi, I ran diskeeper.  It shows more memory are available on C: preload SW, but it shows that a small memory storage is 'service v002 '.  The report states that I need at least twenty percent of this thing available or the computer is running slowly.  I have only ten percent of the available memory, so the ratio of diskeeper said to move some files to make more space, which improve speed and performance.

  I find the preload SW C: easily, but this v002 service is not found in a search.  I understand that the 'v' is abbreviation of volume, so I tried using just the 'v' and clearly explaining volume nothing helps.
  Anyone know what the heck this thing is?  I'm on windows vista, by the way.  Thanks for any help.

  It is no doubt the volume of recovery. In this case, do not do anything for it.

• Audio out-function service

  My computer audio service is not running. I can change the volume level on my computer and play videos, but there is no audio output on the computer or with headphones. I tried to adjust the volume through the control center - sound option, but it shows that everything runs smoothly from there. I also tried to shut down and reboot several times, but he did not make a difference. Any ideas?

  Right click on the speaker on the corner icon right of the task bar and click, "playback devices" now, right-click on an empty space on the page that ensued, and you will be presented with the options "show disabled devices" and "show disconnected devices". There's you favorite "reading devices" disabled?

  What is the number and model of your computer? Have you looked in the Device Manager under ' audio, video and game controllers to see if there is an indication of a problem with your sound device?

  Click Start, type "Troubleshooting" and click it in the list. On the page that then click on, "Audio Troubleshooting" under 'hardware and sound '.

  Read on...

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab2&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

• My post on which I install CC is out of service

  I have to buy a new PC.

  What will be the operations to install CC on the new computer?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• OSB: Out Call Service

  Hello

  Can someone tell me what is the fundamental difference between SOAP body to set up and configure the payload in call service option? Examples / use cases?

  Thank you

  Billon

  [I does not mark the question as answered, once obtained the answer.]

  Hi Bhaskar,

  With the SOAP body set up using $body directly, with a payload of set up, you can use different variables... In addition, payload to configure supports NO - CPP, encoded SOAP... I have never come across a use case where I had to use the payload...

  There's a good table, explaining what should be used here...

  http://docs.Oracle.com/CD/E28280_01/dev.1111/e15866/ui_ref.htm#CACGDEAC

  Also, check these...

  http://docs.Oracle.com/CD/E28280_01/admin.1111/e15867/proxy_actions.htm#OSBAG1124

  http://docs.Oracle.com/CD/E28280_01/dev.1111/e15866/ui_ref.htm#i1291067

  See you soon,.

  Vlad

• mapping crashes when controlcentre service is out of service (wb_rt_notify_queue)

  Hello
  Autonomous running OWB (OWB 10 g 2, db 10.2.0.4, IBM AIX), i.e. the db has a repository of control center for the runtime, no services running from the Center control (aka service execution platform).
  Execution of mappings by using a call to wb_rt_api_exec.run_task ().
  This used to work fine until that last Friday.
  
  But when I run any mapping today, the mapping runs constantly, the status in the WB browser in the local repository is 'Busy' and in v$ session_wait I find a wait event, "Streams AQ: waiting for messages in the queue ' and the value of P1 this wait event via dba_objects points to the wb_rt_notify_queue of internal QA OWB.
  
  Held a trace 10046 sql on the call to run_task() and never starts a SQL related business, the trace just file keeps saying wait events.
  
  The table wb_rt_notify_queue_tab AQ queue holds about 3000 entries, the latest is since last Friday, so none of my past attempts at run_task().
  
  I checked the docs and forums, and it is confirmed that run a deployment target remotely without local CCS/RTP is valid (and worked).
  
  MetaLink, forums OTN and Google are pretty silent on this issue.
  
  What is happening and how to fix it?
  
  Thanks for your help,
  Erik
  
  Published by: ErikYkema on October 13, 2009 22:25 - title changed, has been "Streams AQ: waiting for messages in the queue ' on wb_rt_notify_queue

  Hi Erik,
  According to the Guide of Installation OWB you set up "Autonomous target Schema" (target database with the created repository of OWB and without running service CC):
  (follow the link "implementation of a time distance (optional)")
  http://download.Oracle.com/docs/CD/B31080_01/doc/install.102/b28224/install_rep02.htm#BABJDHCJ
  For this type of Setup Instalation Guide says:

  You can deploy all types of mappings of mappings except PL/SQL on a stand-alone target schema.

  and conditions for the execution of / deployment.

  Therefore, to deploy and run ETL processes in such an environment, the Service Control Center on the other server must run.

  So using wb_rt_api_exec.run_task requires the execution of service CC.

  Without running service CC, you run PL/SQL mapping via the corresponding principal of PL/SQL package function call.

  Kind regards
  Oleg