VOIP Monitor is OUT of SERVICE on UCCX - 9.0.2 - 9.0.2.11001 - 24
Hi All - Recently updated UCCX up version 9.0.2 in CRAIG configuration, where VOIP MONITOR is OUT of SERVICE on the node of the Subscriber.
Restarted cluster - No go
Any idea?
1492016: 24 July 14:53:10.175 GST % MIVR-SS_VOIPMON_SRV-3-operation for the VOIP_OPERATION_ERROR:VOIP subsystem error: Module Name = LrmVoipManager.recovery, A specific description for a returned fail read OPEN_CONF msg = trace is null, Exception =
1492017: 24 July 14:53:10.773 GST %MIVR-CFG_MGR-7-UNK:BSSession:heartbeat::BSSocket.nextInvokeId=130945
1492018: Jul 24 14:53:10.774 GST %MIVR-CFG_MGR-7-UNK:BSMessageWriter-1.writeMessage-> about to write the message bootstrap = HEARTBEAT_REQ [length =-1, invokeId = 130945]
1492019: 24 July 14:53:10.814 GST %MIVR-CFG_MGR-7-UNK:BSMessageReader-1.run-> message read: HEARTBEAT_CONF [length = 4, invokeId = 130945]
1492020: 24 July 14:53:15.777 GST %MIVR-CFG_MGR-7-UNK:BSSession:heartbeat::BSSocket.nextInvokeId=130946
1492021: Jul 24 14:53:15.777 GST %MIVR-CFG_MGR-7-UNK:BSMessageWriter-1.writeMessage-> about to write the message bootstrap = HEARTBEAT_REQ [length =-1, invokeId = 130946]
1492022: 24 July 14:53:15.818 GST %MIVR-CFG_MGR-7-UNK:BSMessageReader-1.run-> message read: HEARTBEAT_CONF [length = 4, = 130946 invokeId]
1492023: 24 July 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-operation error VOIP_OPERATION_ERROR:VOIP subsystem: Module Name = LRMConnection.readMSG: lrmHost: 172.17.16.10, lrmPort: 3000, is a specific description for track = error:, Exception = java.io.EOFException
1492024: 24 July 14:53:20.195 GST %MIVR-SS_VOIPMON_SRV-3-EXCEPTION:java.io.EOFException
1492025: 24 July 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at java.io.DataInputStream.readInt(DataInputStream.java:375)
1492026: 24 July 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.lrm.io.CRSLRMInputStream.readINT(CRSLRMInputStream.java:211)
1492027: 24 July 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.lrm.io.CRSLRMInputStream.readMHDR(CRSLRMInputStream.java:356)
1492028: 24 July 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.VOIPMonitor.subsystem.LRMConnection.readMSG(LRMConnection.java:156)
1492029: 24 Jul 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.VOIPMonitor.subsystem.LrmVoipManager.recovery(LrmVoipManager.java:444)
1492030: 24 Jul 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.VOIPMonitor.subsystem.VoipServerHeartbeatThread.run(VoipServerHeartbeatThread.java:50)
1492031: 24 Jul 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: to com.cisco.executor.impl.ExecutorStubImpl$ RequestImpl.runCommand (ExecutorStubImpl.java:690)
1492032: 24 July 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: to com.cisco.executor.impl.ExecutorStubImpl$ RequestImpl.run (ExecutorStubImpl.java:486)
1492033: 24 Jul 14:53:20.195 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: to com.cisco.executor.impl.ExecutorStubImpl$ RequestImpl.run (ExecutorStubImpl.java:762)
1492034: Jul 24% 14:53:20.196 GST MIVR-SS_VOIPMON_SRV-3-EXCEPTION: to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:776)
1492035: 24 Jul 14:53:20.196 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: to com.cisco.executor.impl.PooledExecutorStubImpl$ $1 WorkerImpl.run (PooledExecutorStubImpl.java:99)
1492036: 24 July 14:53:20.196 GST % MIVR-SS_VOIPMON_SRV-3-EXCEPTION: to com.cisco.util.ThreadPoolFactory$ ThreadImpl.run (ThreadPoolFactory.java:853)
1492037: 24 Jul 14:53:20.196 GST % MIVR-SS_VOIPMON_SRV-3-operation for the VOIP_OPERATION_ERROR:VOIP subsystem error: Module Name = LrmVoipManager.recovery, A specific description for a returned fail read OPEN_CONF msg = trace is null, Exception =
1492038: 24 Jul 14:53:20.781 GST %MIVR-CFG_MGR-7-UNK:BSSession:heartbeat::BSSocket.nextInvokeId=130947
1492039: Jul 24 14:53:20.781 GST %MIVR-CFG_MGR-7-UNK:BSMessageWriter-1.writeMessage-> about to write the message bootstrap = HEARTBEAT_REQ [length =-1, invokeId = 130947]
1492040: 24 July 14:53:20.828 GST %MIVR-CFG_MGR-7-UNK:BSMessageReader-1.run-> message read: HEARTBEAT_CONF [length = 4, invokeId = 130947]
1492041: 24 Jul 14:53:25.784 GST %MIVR-CFG_MGR-7-UNK:BSSession:heartbeat::BSSocket.nextInvokeId=130948
1492042: Jul 24 14:53:25.785 GST %MIVR-CFG_MGR-7-UNK:BSMessageWriter-1.writeMessage-> about to write the message bootstrap = HEARTBEAT_REQ [length =-1, invokeId = 130948]
1492043: 24 July 14:53:25.825 GST %MIVR-CFG_MGR-7-UNK:BSMessageReader-1.run-> message read: HEARTBEAT_CONF [length = 4, = 130948 invokeId]
LRM keeps the value of active LRM in the form of a key in the LDAP database(Calabrio's). And all the services/clients use this key to determine which server LRM, they have to connect to.
Then when the VoIP LUN SS is looking for this key in it is the own Server LDAP database and is unable to connect to this server in the key, this means that it is either the IP address of the IP address of inactive server(Slave's) LRM or they have problems of network/firewall connection between the two servers.
Could be several reasons such as questions in the data base LDAP, no update of CVD, or simple connectivity problems.
For the moment, do the following step by step:
1) Restart the LRM service on the Master Node(Node 1)
2) Restart the LRM service on the Slave Node(Node 2)
3) Restart the LDAP Monitor on the Master Node
4) Restart the LDAP Monitor on the Slave Node
5) Restart the CCX Engine on the Master Node. (Note, this will failover the mastership from the Node 1 to Node 2)
6) Once the Engine is up on Node 1, restart the CCX Engine on the Node 2 to fail the mastership back to Node 1
This should ensure that the key to the address of the Active Server LRM is reset in the nodes (no problem in cardiovascular disease, on the other, you must restart the server after you complete the steps above considering).
HTH
Prashant
Please evaluate the useful messages and mark resolved threads as replied to drive the content more far.
Tags: Cisco Support
Similar Questions
-
UCCX 8 VOIP Monitor Subsystem - off Service
All,
Updated 701 (SR5) CCX to CCX 8.0.2 Premium HA activated. Both servers were in SERVICE. A Patch have upgraded to UCCX 8.0.2SU1. Noticed that VOIP Monitor Subsystem on both servers to list as OUT of SERVICE. Downgraded to CCX 8.0.2, always get this subsystem OUT of SERVICE.
RTMT, it displays the following error:
% MIVR-SS_VOIPMON_SRV-3 - VOIP_OPERATION_ERROR:VOIP subsystem operation error: Module Name = LRMConnection.readMSG, an accurate description of a trace = erroris:, Exception = java.io.EOFException
Anyone Kow how to solve this problem?
Thank you.
Hello
I suggest you to restart the two boxes using the command 'restart System utils' and see if it helps to resolve the issue.
Waiting for the master server at the first reboot until it comes completely, and then restart the secondary zone.
Concerning
Anuj
-
Satellite A300D - Webcam is turned off or out of service
Hello world
I have a problem with the webcam. It worked fine, but not when I run the app, it says:-"the device is switched off or out of service. Check the settings.
I already reinstalled all the drivers on the official site, removed and installed again - nothing has worked. OS - Windows Vista 32.
It's strange when you use SKYPE micro works!) The webcam may not be intended.What should I do?
Thank you
Hey,.
That s really strange usually reinstall the webcam software should work
You use the version of Vista preinstalled Toshiba?
You can also try a program of cleaning for Windows like CCleaner. It s really recommendable program that is easy to use and freeware. You can get it here:
http://www.Piriform.com/Choose cleaner and registry options to clean your system. Maybe it works :)
-
Monitor says out of range. also 91 khz frequency 85 Hz v... need of v to 75 Hz frequency. How can I do this?
Hello
Please see your message to http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/hertz-problem/5f02a5c5-b059-e011-8dfc-68b599b31bf5
-
My laptop has been out of service for Windows 10 preview and free offer, but now work. Is it possible to get the upgrade for Windows 10 free?
Hello
You buy Windows 10, as there is no free upgrade to Vista 10.
Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.
http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/
How to buy Windows 10:
http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700
But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.
https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs
" System requirements Windows 10"
https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements
Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015
"FAQ Windows 10.
http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ
See you soon.
-
IPCC "the extension of the agent is out of service."
We use IPCC 4.0 (3) _Build080, we have a new user in the system like everyone else. When this user tries to enter a ready state in the agent's Office, he gets the following error:
13:16:20 cannot go to the ready state, while the phone is out of service. Other status changes are possible.
--------------------------------------------
13:16:20 that the extension of the agent is out of service.
Ready state change and call control operations can be performed.
I have the same problem occasionally. I use version 3.5. (2) and the solution for me was that I have deassociated users with user rm extensions and the agent itself. Then the extension associated with my id and then logged on to office and go into the ready state without any problem on the affected expansion.
After I did I associate the extension with the rm user and the agent itself again, and it worked every time.
I have no idea but why this happens, but it might have something to do with replication / connectio nbetween systems of IPCC and CCM.
I hope that helps you!
-
MGCP DChannel is out-of-service
Hi all
I get an alert of the RTMT tool. It's contitnuous flood in every second. Any solution for this.
Error is mentioned below.
MGCP DChannel is out-of-service
Status D-Channel-Out-Of-Service gateway device (s): [email protected] / * /Concerning
Virendra P
seems okay... are you sure this is the right gateway?
What version of CUCM do you have and what version of IOS on the VG are you running? It has never worked?
-
Autonomous CVP w Reporting. VB Admin out of Service
CVP 4.1
Autonomous with reporting model:
1 GW 3845
1 MCS 7845 call + VxML Server
1 MCS 7845 Reporting Server
1 MCS 7835 OPerations Console
1 studio of MCS 7835
I registered online PAK codes for the
-Server-Sw and applied the ICA on the server to call
-CVP 20 VxML Ports on the VxML Server 4.x
-Reporting Prem lic on the report server
using the operations Console
Also, added the GW and transferred the CVPSelfService.tcl, the CVPSelfServiceBootStrap.vxml and the CriticalError.wav to the same using the Console.
Call the server, server VxML and Reporting Server are UP on the Console.
Have restarted the combo CallServer + Vxml Server, but the speech browser shows out of Service and tries to contact the GK.
But it is independent, there is no GA, why VB is trying to get a GK?
I didn't go any single on the VB Admin command, as the configuration guide has not said to me to do.
First Question:
1. While installation was SVC Call Server I supposed to select H.323 as Autostart CVP VB services at startup, no. Sytem restart on error display & CVP VB window on startup, or NOT?
Because I did, but then I added call server in the Console of the operation - I did not any service at all.
2. If the answer to the above question is that Yes, I had to select H.323 Services/Start VB window etc. during the installation options. Then what don't get me, why the VB is out of service and it is looking for a GA?
Kindly help.
No voice browser is required.
Kind regards
Geoff
-
site web stock. Adobe is out of service
Adobestock.com is out of service.
Hello
Please see error 400
Hope that helps!
Kind regards
Sheena
-
The Web Cache instance is out of service every hour
Hello
I have 11.1.0.1 on Solaris 10 SPARC EM grid control. All the patches in the applied SGD.
I have problem with monitoring application 10.1.0.1 on Solaris 10 x 86 Server. Agent 11.1.0.1.
emagent.TRC:
2011-01-11 10:27:57, 745 ERROR Thread-440 engine: [Cache oracle_webcache, reports.sun - rep_Web, ESI_HIST]: nmeegd_GetMetricData failed: java.lang.NullPointerException
2011-01-11 10:27:57, collector of Thread - 440 WARN 745: < nmecmc.c > output error. Error: java.lang.NullPointerException
I get alerts every hour with "the Web Cache instance is down".
Help, please.If the agent gets really restarted several times a day (every hour for example) which is certainly not expected behavior...
I found this - perhaps it helps:
(you should check your mentioned errors log files)The 11g EM Agent restarts at frequent intervals with the following entries in the /sysman/log/emagent.nohup file of
emagent started successfully
URLTiming: Using SunX509
Exception in thread "oracle.dms.collector.GatherThread@15000".
java.util.ConcurrentModificationException
to java.util.HashMap$ HashIterator.nextEntry (HashMap.java:793)
to java.util.HashMap$ EntryIterator.next (HashMap.java:834)
to java.util.HashMap$ EntryIterator.next (HashMap.java:832)
at oracle.dms.collector.Gatherer.cleanup(Gatherer.java:235)
at oracle.dms.collector.GatherThread.run(GatherThread.java:85)
-Recycling process. VMSize is 6385.46875 MB increased 6327.09375 MB
past 3 -.
-Thu Jul 15 02:14:08 2010::Received asks to restart EMAgent: 12200
-----
-Thu Jul 15 02:14:08 2010::Stopping EMAgent: 12200 -.
(pid = 12200): emagent now go out normallyThe new start above occurs when the virtual memory consumed by the Agent have crossed the line and that's why he is automatically restarted by the daemon process.
-The
/sysman/log/emagent_fetchlet.trc also shows a lot of errors related to the JNIFetchlet: [nmefmgr_getJNIFetchlet] Warn emd.fetchlets getMetric.387 - oracle.sysman.emSDK.emd.fetchlet.FetchletException:
oracle.sysman.emSDK.emd.fetchlet.FetchletException: java.io.IOException:
Cannot connect to any host
oracle.sysman.emSDK.emd.fetchlet.FetchletException:
oracle.sysman.emSDK.emd.fetchlet.FetchletException: java.io.IOException:
Cannot connect to any host
to
..............
[nmefmgr_getJNIFetchlet] WARN JMX.generic logp.251 - IOException: can not connect to the target with
serviceURL=service:jmx:t3s://agentmachine.domain:7101/jndi/weblogic.management.mbeanservers.runtime for weblogic_j2eeserver:server metric:
Unable to connect to any host Cause: javax.naming.NamingException: unable to connect to any host [root exception is org.omg.CORBA.COMM_FAILURE: vmcid:]
[Minor SUN code: 203 out: No.]-Historical data for the "use of memory resident (%) 'or' memory use virtual growth (%) ' parameters for this Agent show large memory
use over the period, when the Agent has increased.
These details are accessible from the configuration of Console grid-> Agents-> click on the name of the Agent-> click on 'All settings'-> Expand ' Agent process
Statistics-> click on the "use of memory resident (%) 'or' memory use virtual growth (%) '.Cause
This issue has been studied in the Bug 9829732: AREA of SGD AGENT 11.1.0.1 RUNNING ON CONSUMED the UPPER MEMORYUsing pmap to check the memory usage:
$ ps - ef | grep agent11g
PMAP $Returns a result as below:
....
00002aaab32e0000 rwx 21248-[anon]
00002aaab47a0000 rwx 64768-[anon]
00002aaab86e0000 125632 rwx-[anon]
00002aaac0190000 1884160 rwx-[anon]
00002aab33190000 rwx 62784-[anon]
00002aab36ee0000 942080 rwx-[anon]
.....It was found that the majority of virtual memory has been consumed by these [anon] blocks.
It was found that the memory of Java used by the Agent when using JNI calls must be tuned. This may be necessary when the large number of "java" such as Weblogic servers targets is monitored by the Agent.
-
Monitor the Out - Qosmio X 300 12 years
I have a Qosmio X 300 12 years old and I want to use my monitor out and use it in my TV.
I did not have a HDMI TV, cannot use this output.
I bought a monitor to Composite/SCART but cannot make it work. I tried to go into the control panel NVidia and forcing detection, but without success.
Can someone give me some clues?
Thank you!
You have activated the right port on your TV?
-
My acer apirse 8930 monitor is out of sync
original title: my acer 8930 monitor apirse malfunctioning outputs work fine just the drivers reinstalled main monitor any help?
the laptop screen is kind of out of sync, there are two sections that the top 3/4 is kind of the opac and down 1/4 looks like thw top 1/4 If you know what I mean! also the extrenal hdmi and vga work very well...
Hello
go to the link below and look for the latest Acer drivers
http://support.Acer.com/us/en/product/default.aspx
If the problem persists contact your computer acer laptop screen:
-
Monitoring of the IIS Service Manager.
Hi, I have Foglight 5.5.8.2. I know that I can control the IIS server with the windows agent but how can I follow the following.
Manager of IIS - application (DefaultAppPool, pmsnet, PMSNetInstal, pmsnettrain) Pools
The Internet - websites (default Web Site) services manager
If you want to monitor a web site, any web site, you can use the agent webmonitor. The web monitor is a part of the operating system control (old OS monitor) http://edocs.quest.com/foglight/565/doc/wwhelp/wwhimpl/common/html/frameset.htm?href=Cartridge/OSCartridge/index.php there is also an article that mentionshttp://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/w/admins-wiki/5646.monitoring-application-availability-using-foglight-utility-agents
With respect to other measures of surveillance, if you can get this information with powershell or other type of script, you can send information to Foglight as agent script, as explained in the following article http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/w/admins-wiki/6155.custom-script-agent-1-leverage-an-existing-monitoring-script-to-push-data-into-foglight
I hope this helps.
Golan
-
Then 4.6 Hyperic to monitor a remote FTP service?
Our company sometimes has problems with an FTP client. Sometimes we cannot authenticate, and sometimes authenticate us but cannot transmit files.
I set up an FTP service on the platform (linux, server) already allows us to FTP files to this customer. I have configured the service with the IP address of the client's server and the name of user and password used for the test. Availability is always 0% (or a "!") and said response time 'Metric data not available', yet it metrics records from time to time for all incoming connections, WORKBENCH and same State FIN_WAIT2 State.
Am I headed in the right direction? My TI colleagues want availability at least (authentication) of the system remotely and at most confirm file transfers work. (The last part, I think to have to schedule test jobs who receive files in a test file, so this file/folder for monitoring changes.)
On 29.11.2012, at 14:26, rwmastel [email protected]> wrote:
If the counters, including availability, are specific to the local host, rather than the remote host specified in the configuration of the service, then how do I think the metric for the remote server? Is this possible?
Sorry, there was a misunderstanding: availability and response time are associated with the actual trial Hyperic done by connecting to the remote host.
What about monitoring file transfers, I have not tried but I thought a script would have to FTP autour files and Hyperic should be able to control the files as they appear. If this is the best test, then maybe I should work on this issue from this angle.
Definitiely would be a way to do it. And if you want to monitor end-to-end, including file transfer itself, it's the way that I recommend.
-
Source monitor: playing out from keyboard shortcut
Hello everyone.
I was wondering if anyone knew where in the contextual menu keyboard is the ' play in to Out ' for the source monitor? By default, that the key 'Q' is the point of going and the 'W' is going to point. I want to put the "E" key to play out so that I can review my range quickly I got with/out markers.
I looked through the hotkeys widely and can't seem to find it. Is there another name for it now as in the case of the former "razor to the current-time indicator" or it is not able to be used with a keyboard shortcut?
Thanks in advance for any info.
Shane
It is in the Application shortcuts, since it applies to the Source monitor and timeline panel program monitor. I do not think it is assigned by default; It is simply called "play out."
If you're on CS5.5, picks up in the keyboard shortcuts dialog box.
Maybe you are looking for
-
MacBook Air external NTFS drive reading
HI, this is my first post. My wife has a MacBook Air 13 "display mid 2013 running Yosemite OSX v 10.10.5 I'm trying to read and then copy the files from a NTFS formatted drive that I use on my Win7 machine. I'm trying to transfer files from the PC to
-
Is there a change of leading event?
Is there an event that will tell me when the VI loses most? I would like to make a sort of deadman's trigger that fires when the front is no more. If it comes to it, I'll ask FP.isfrontmost.
-
Dynamic report having to update each round in PWM
Hi all I am a newbie of LabVIEW working on the generation of PWM signal. I have to generate a PWM signal such as its ratio of obligation and indeed it should change the pulse width in each cycle based on the values stored in an excel sheet. I downloa
-
Error code: OX80072EFF (cannot install updates)
can you please help with that? Thank you
-
Can I use my Switch SW3-013-1566 as a monitor of the camera using the HDMI port?
I did research on this scenario but see no mention of the possibility of using my Acer SW3-013-1566 tablet as a digital monitor for my Canon 7 d DSLR camera. If anyone knows how this can be done please let me know and which downloadable programs I co