Micro? Satellite M30 series

Similar Questions

• Need of recovery for Satellite M30 Series CD

  Hi all!

  I lost my recovery CD and in France they say that it is not possible to send one for me (they said it's old and they don't have them).

  First question: is it possible to use a CD from an another Toshiba (same model)?
  A second: If so, can someone send it to me? I live in Paris!

  Thanks in advance.

  Hello

  Satellite M30 is old enough laptop model, and I can imagine that this authorized partner can not order the original CD more.

  It will be much better off buying the CD of Microsoft WXP facilities (on eBay it ain't cheap) and you can install WXP yourself. All the necessary drivers, tools and utilities that you can find on Toshiba supports the page.

  For me, it's the best solution for you.

• Satellite M30 series - touch pad disabled

  I accidentally cancelled the "touch pad" icon in the laptop. Now touch pad pointer does not work.
  How can I reactivate it?

  Thank you

  Hi Nathalie,.

  The installation of touchpad are normally activated by the Fn + F9 key making to toggle the touchpad on and outside.

  Kind regards

• How can I check sound version and watch on Satellite M30 power?

  I have a Toshiba Satellite M30 series and have lost my audio. I don't know if I checked something l ' turn off or what. Can someone give me some ideas on how to check it? The other is stupid - how do I know what saving use?

  Right now my setting is on Power Saver 2 and I'm having problems, that I found an answer to this, of overheating, but it was suggested to check the energy saving, how do you know that one to use?

  Any help will be appreciated.

  Hello

  It's very simple. You should visit the Toshiba driver page and you will find the correct drivers and utilities also energy saver.
  After the installation of the power saver you use defined parameters. The cooling method, you can define if you want to cool the most powerful CPU for maximum performance.

  Now on your noise problem:
  Well, first go to Device Manager and check the status of the sound card.
  If there is everything is fine and there is no exclamation point yellow if all the drivers are installed and working properly.
  In this case I recommend to enter the control panel and select the Audio & Sound devices. There you can check if the 'secret' was not enabled and if other controllers are defined at the higher value.

• Satellite Pro M30 series deactivates the WLan connection

  I have an old Satellite Pro M30 series. Whenever I turn on the wireless signal, the computer closes its doors.
  I assume that the driver's latest version.

  I'm not known for that Yes, there is someone out there who can advise me on where to find the latest driver and install it.

  Assuming this is the problem.

  Thank you
  Gibbsey

  > spend a lot of time on the wireless signal, the computer closes its doors.

  What do you mean exactly by farm down?
  The laptop turns off automatically once the WiFi (switch) card is turned on?

  I put t think this would cause obsolete WLan driver, this sounds like a hardware problem.
  In case it of not possible to use the internal WiFi card, I recommend to use an external USB WiFi dongle.
  Would be the best option

  PS: all the drivers for old Toshiba laptops are placed on the page of the Toshiba UE driver.
  You will need to search the archives (in the product Type click Archive) for a list of the old series of laptop computer.

• Ports COM1-4 'missing' Satellite M30

  Hello, communication ports (COM1-4) series of my sound of portable Satellite M30 suddenly "disappeared", or, at least, Window XP (Home version) is unable to detect them - through the management of resources or similar tools of surveillance - only parallel port (LPT1) is reported.
  Problem is that the modem (internal standard) (by default on COM3) is unable to work. Modem seems ok - at least according to Windows - but, as you can guess, it cannot accept AT command (and therefore start up).
  Everything else seems to work fine - including the Infrared Port, which should work, by default, on COM4? and mouse Touchpad. No problem i/o and IRQ address is detected on the other peripherls.
  Only the system serial port driver (serial.sys) is alarmed that unable to boot because.
  ..??? .. Even thought a hardware problem - ex.electrostatic discharge or similar? - but a couple of days ago the modem starts unexpectedly and worked correctly for long enough - even if with the COM ports still without being detected by Windows - but after connection went down and modem could not start (Error 633: modem, a device already in service or other problems of configuration...).
  .. Before proceeding to more annoying (and probably expensive) actions - such as reinstalling Windows?... or looking for a repair center - I wanted to try to replace the driver (serial.sys) series, but I was unable to find it-in the CD provided with the product or on the Toshiba site. Where can I find it?
  Other suggestions?
  Thank you

  Hello

  Don t look for serial port drivers. These ports are using simply common Microsoft Windows drivers!
  According to your description there are different problems with different internal devices.

  If all goes well it of not a hardware problem?  :|

  So in my opinion we must first know if it s a software or hardware problem.
  In this case you take your original Toshiba Recovery CD and must be reinstalled the operating system.

  Note; the whole HARD disc will be fomrated and you will lose data. So, don t forget to back up your data.

  If the new installation of the operating system didn't help any, and you will always receive error messages the technician must check the laptop!

  Good luck

• Need good drivers for Satellite M30 304

  I have a Satellite M30-304. I rebooted the laptop and formatted everything, including pilots. Unfortunately I have lost my CD of restoration as well. So, I tried to download it online on the official website but I downloaded the wrong drivers making my laptop more low and I can't even use my special functions of the keyboard and my screen become darker.

  Does anyone know how to download the right drivers and whence?

  Hello

  In my opinion the wrong drivers are not responsible for these problems, but of course, you should be 100% sure that you have installed the correct drivers!
  Unit you seems to be a part of the PSM30E series.

  Need to select the model of laptop and this part number in the download form. All that s

• Cannot install modem SATELLITE M30 604

  I don't see my modem in Device Manager. I can't see a com port in Device Manager.

  When I choose Control Panel > phone and modem options, I don't see modem.
  I chose the Add button. My modem is not detected. Then I have the possibility to install it in a list.
  I chose Have disk.
  I chose the Browse button and
  I select the Tools & Utilities CD-ROM supplied with my laptop (or downloaded files from Toshiba).
  I select the (D:\Modem Driver\NETHERLD) ltsmwxp.inf file on the CD.
  Always SOME models appear in the window of modew new installation.

  How can I install my modem?

  Hello

  I'm sure that you can install driver modem Tools & Utilities CD. If you want to download it on this way.

  Type of portable computer product
  Satellite family
  Satllite M Series product series
  Satellite M30 model
  Windows XP operating system
  Driver Modem driver type.

  Then choose the appropriate driver for your country and try to install it again.

• Satellite M30 - error message after replacing the DVD drive

  Virgin, excused my English ;)
  I have a satellite m30 and I replaced the DVD-cd-rw drive in series with a SLIM NEC ND-6650 DOUBLE LAYER, DVD time bios gives me error
  0203: failure IDE #2
  Is it possible to remove this message?

  Hello

  As far as I know that this message can not be eliminated and it happens every time if you want to use the drive is not compatible. Always is it that all readers may not work with all models of laptops.

  In this case, fundamental problem is the pin assignment. It is not the same in all players.

  Good bye

• Satellite M30 742: need Win XP drivers and tools

  Hello

  After running my M30 5 years without problem, I had a fresh install of windows XP.
  No problem. But now I can't find a few drivers and utlilities. Or those I found does not work.
  is not owrking:
  fn - keys (for brightness and soundvolume etc.)
  -LCD screen saver. My screen fades always if I change powersource.

  The fn keys I really need, since I use my computer laptop a lot with a second screen or projector.
  The control utility of the poweruse on the LCD is pretty handy too. But all I get is a program error.

  I used the cd with the drivers that came with the laptop. But when it does not work I tried a few drivers I found on the toshiba site. But still no luck.
  I have an infer M30 742
  Can someone help me?

  Thank you

  Hello

  You can find all the drivers for the page of the European driver Toshiba Satellite M30.
  But the M30 is a former series of notebook and that's why pilots have been moved to the archives.

  In the first option called product type, just chose Archive instead of the laptop.

  See you soon

• Satellite M30-304 - strange questions after BIOS update

  Hi all

  I updated my BIOS according to the good driver for Satellite M30. However, since this operation took the endless problems with screen and wireless card. Also the screen used to display flash BIOS only now them a Centrino, Centrino logo sometimes sometimes Mr. Pentium, I don't know that the version of BIOS is incorrect for my laptop. If I try to re - install the upgrade, it is said version already installed 1.7, so will not continue.

  1. is there a way to force the re - install the same version?
  2. someone can the upgrade me of the correct BIOS Setup for the model n ° PSM30E-0QKJ1-5U, I installed the version was 20070807154017

  The history is quite interesting. AFAIK Centrino logo is there if the Centrino platform is in use.

  The Centrino platform consists of:
  an Intel Pentium M processor
  a chipset Intel 855 of the series
  an Intel PRO/Wireless 2100 or later 2200 (IEEE 802 11 b) mini-PCI wireless adapter

  If a component is removed (Intel PRO/Wireless mini-PCI wireless adapter) the Centrino logo will disappear. I don't really know why logo is from time to time, but you did the right BIOS update. There is no other for your laptop model.

  Can you please tell me what is the problem with your wireless network adapter? You can use just sporadically or what?

• Function FN keys don't work no-Satellite M30-107

  Hi all

  I have an old M30 - 107 that I recently reinstalled and updated the operating system.
  The function keys control the screen brightness, volume etc. do seem to work.
  I think that I've updated all the drivers for the laptop.

  Is there a specific driver (ie the chipset driver package) I should be looking that control these function keys or should they train with intervention of Ant in a pack driver bios etc. related?

  Satellite M30-107 XP edition SP3

  Thanks in advance... C.

  Satellite M30-107 is a part of the PSM30E series. Is this good?
  You can see this number when you look at the bottom of the unit. There should be a label with the model number.

  Go to the page of European driver of Toshiba and searching for archiving.

  Choose + Archive-> Satellite-> Satellite M Series-> Satellite M30-> Win XP +.

  You must download the * common Module *.

  This common module must be installed first!
  Then, you need to install additional software like Touch Pad on / off utility Hotkey utilities for display devices.

  These programs will allow the Fn keys

• High temperature CPU on Satellite M30

  Hello

  I have a Satellite M30 852 with Pentium M 1.5 GHz processor. My problem is that the heater does not start until the CPU temperature reached 70 degrees, which I think is a bit high, no mention that when it has reached this temperature I can not keep the laptop on my legs because it burns... and also to kind of warm around the touchpad and left side of the keyboard.

  My question is if there is any software I can use to take the cooler start at low temperatures, to keep, or if there is no setting I can adjust the laptop utilities to solve this problem (in addition to throttle CPU cooling where is defined in the performance).

  Thank you all in advance!

  Could PS: Anyone tell me which button support when starting, to get into the BIOS...? Because the F1, esc or del does not work.

  Post edited by: master of ceremonies

  Hello

  The temperature of 70 ° C nothing unusual and in my opinion not too high.
  Is that it s not recommended to use the laptop on your legs or in bet, etc.
  You should always be sure that there is enough free space (left, right, bottom) around the laptop for the circulation of fresh air!

  Usually, the Toshiba power saver controls the cooling method and the CPU processing speed. If you want to change some settings you should the fact in the basic power saver menu.

  PS: on m30 the phoenix BIOS has been installed and therefore, you should use the F2 key.

• Satellite M30, partitioning

  After that I got some error messages and viruses so I had to format my laptop the Satellite M30.
  I used the recovery CD Toshiba 2 and the only option for me was Option 1 Option 2 is reserved for specialists, and I'm not familiar with all the terms it. In any case, the formatting not only formatait the C:\ but D:\ thus merged the formerly 2 x 30 GB in a single C:\ partition, I had no option to stop this.
  How can I split my C:\ drive again into 2 partitions of the same size?

  Sorry, but the only way with the delivered software on a M30 to create partitions is the expert mode.
  As far as I know.

  But I have a proposal.

  Tomorrow I'll do a recovery on my M30 will inform you as soon as possible.

  Good bye

• Satellite M30, Intel pro WLAN 2100 3B mini PCI adapt does not

  Hello
  I bought a satellite M30 a week ago. I used the wirless lan a few times. Now I rebooted the computer after that the wireless network adapter no longer works. In the properties of the device, there is error code 10: impossible to activate the device.
  I tried to uninstall the device and installing again, but it did not work.
  Do you have any suggestions?
  Thanks in advance

  Alberto

  Hi, congratulations on your Satellite M30!

  Cold machine. Well I'd keep it very simple. Redefine your laptop to factory settings (Simple recover using the CD or the DVD delivered).

  If the won´t still card Wifi works, there will be a material damage on your laptop.

  Please let the dealer take a look on your machine.

  Good bye