Micro 'unplugged '.
Last week I installed SP2, on the supported Microsoft would have set the microphone problems with SP2, but discovered, it is always the same. Micro does not work after you install SP2 (vista)
I need your help / suggestion here.
I checked with the seller (MSI) and got the driver to full day. (If you need I can give the description of the details of motherboard and stuff)
Audio device is Realtek - fully updated
Updated Windows Update.
Speakers work fine. That's the problem with the microphone. When I go to control panel-> Sound-> registration-> Microphone is Realtek (both - "show individuals with reduced mobility and disconnect the devices ' is checked), I think it's to do with disconnected devices (because when I 'view devices turn off' - nothing is displayed). -l' microphone option is grayed out I can't do anything. When I tried the speech recognition that he says no hardware device is found - (this is despite the fact that I have connected the new helmet to the system)
Don't know how to fix and also I did not have the option to go back to the previous date, because I did not create the restore point.
Can someone help me please. Thank you
Hello
Did you do this:
MIC and try plugging
Click with the right button on the speaker near clock - recorders - right click in the box - check Show disconnected
Devices and display disabled devices - check your micro - highlight them and then at the bottom right
Properties. Make sure that the appropriate injector is enabled and check the other settings - levels tab
Make sure that MUTE is disabled and APPLY / OK changes.
Maybe reinstalling Skype and/or check their support and forums, as appropriate.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
Satellite A120: Microphone does not work when the power cable is unplugged
I have a Toshiba Satellite Pro A120, which has just begun to play up...
I regularly record music of my DJ Mixer in microphone of my laptop entry, recording in Adobe Audition.
Because the power supply makes a buzzing sound, I can't register with the power cable plugged... If I always record with the unplugged power cable, running off battery.
I've never had any problems before, but what has caused the problem, I now, was earlier the battery ran out while recording, put the laptop into hibernation mode.
Since then, I can't register with the power cable disconnected. He recorded only with the cable - which is not a good cause snoring.
It is not a problem with hearing, because in Windows Vista its implemented the problem proved too. As soon as I unplug the power cable, microphone disappears from view.
I used to work in IT support, so I'm not a technophobe - but I can't for the life of me works why it would suddenly start to occur, power is not related to the entrance it is micro... !
One of you lovely people have ideas? I checked power options and the Device Manager to see if theres no hardware issues, but there isn't.
I also reinstalled my sound card drivers.
It's strange. I guess you tried a boot cold fresh. Hibernation can sometimes cause problems with the devices.
Try to update the BIOS.
If all else fails, you may need to reinstall Windows. (Backup your data and run recovery by holding down the button reset during power on)
-
my iMac will stop all the time and I have to unplug it to restart
Sometimes it gets really hot I ever noticed with this mac but I have on my other Macs.
I ran Etrecheck and here's the report. Can someone help me please
Description of the problem:
Shutdown
EtreCheck version: 2.2 (132)
Report generated on 30/09/16 13:56
Download EtreCheck from http://etresoft.com/etrecheck
Click on the links [click for support] to help with non-Apple products.
Click on the links [click for more details] for more information on this line.
iMac (20-inch, mid 2007) (checked)
iMac - model: iMac7, 1
1 2 GHz Intel Core 2 Duo CPU: 2 strands
6 GB of RAM expandable
BANK 0/DIMM0
2 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
4 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
ATI, RadeonHD2400 - VRAM: 128 MB
iMac 1680 x 1050
OS X 10.10.5 (14F1912) - since the start time: 04:35:15
Q ST3250820AS disk0: (250,06 GB)
EFI (disk0s1) < not mounted >: 210 MB
Untitled (disk0s2) /: 249,20 (Go 47,18 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Built-in ISight from Apple Inc..
Sunplus Innovation Technology USB to Serial - ATA bridge 252.4 MB
disk1s1 (disk1s1) < not mounted >: 252 MB
Computer, Inc. Apple IR receiver.
Apple Inc. Bluetooth USB host controller.
Mac App Store and identified developers
/ System/Library/Extensions
com [loading]. Cycling74.driver.Soundflower (1.6.7 - 10.7 SDK) [click for support]
[no charge] com.Nike.sportwatch (1.0.0) [click for support]
/Users/[redacted]/library/services/ToastIt.service/Contents/MacOS
[no charge] com.roxio.TDIXController (2.0) [click for support]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist [click for support]
[operation] com.nike.nikeplusconnect.plist [click to support]
[loading] com.oracle.java.Java - Updater.plist [click to support]
[loading] com.adobe.ARMDC.Communicator.plist [click to support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist [click to support]
[loading] com.adobe.fpsaud.plist [click to support]
[loading] com.bombich.ccc.plist [click to support]
[loading] com.oracle.java.Helper - Tool.plist [click to support]
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
FlashPlayer - 10.6: Version: 23.0.0.162 - 10.9 SDK [click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 15.017.20053 - 10.11 SDK [click for support]
AdobePDFViewer: Version: 15.017.20053 - 10.11 SDK [click for support]
Flash Player: Version: 23.0.0.162 - 10.9 SDK [click for support]
Default browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.41212.0 - 10.6 SDK [click for support]
JavaAppletPlugin: Version: Java 8 update 91 build 14 check the version
TrafficLight
Ghostery
IncognIt VPN switch
3rd party preference panes: ℹ️
Flash Player [click for support]
Java [click for support]
Mobile backups: OFF
Automatic backup: YES
Volumes to back up:
Untitled: disc size: 249,20 GB disc used: 202,02 GB
Destinations:
LaCie imac [Local]
Total size: 494,68 GB
Total number of backups: 14
An older backup: 2016-09-13 04:29:11 + 0000
Last backup: 2016-09-22 22:39:28 + 0000
Backup disk size: too small
494,68 GB backup size < (disc 202,02 GB X 3)
By CPU process back to the top: ℹ️
3% WindowServer
1% nsurlsessiond (2)
1% fontd
1% cloudd
0% taskgated
Top of the process of memory: ℹ️
1.08 GB com.apple.WebKit.WebContent (9)
508 MB kernel_task
313 MB Safari
Mds_stores 129 MB
Cfprefsd (2) 129 MB
Virtual memory information: ℹ️
1.46 GB of free RAM
Used 4.54 GB RAM
Used Swap 0 B
Sep 30, 2016, 09:19:18 test - passed
September 29, 2016, 09:54:29 /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.preferences.extensio ns.remoteservice_2016 - 09-29-095429_ .crash [deleted]
September 29, 2016, /Library/Logs/DiagnosticReports/networkd_2016-09-29-052456_[redacted].crash 05:24:56
Sep 28, 2016, 08:48:21 / Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-09-28-084821_ [redacted].cpu_resource.diag [click for more information]
Hi there champrider,
It sounds like your computer guard stop on its own, and the only way you can get it to come is to unplug for a while. If you get some sort of error when the computer restarts, take a look at this article:
OS X El Capitan: If your Mac restarts and a message
If this isn't the case, then I suggest starting in safe mode to delete a few caches as well as system-level to check and fix if necessary startup disk.
OS X El Capitan: start in safe mode
If the problem persists then I would then reset the SMC on your computer:
Reset the management system (SCM) controller on your Mac.
Thank you for using communities of Apple Support.
-
end of 2011 MBP stops when unplugged
Hello, my MBP end 2011 (on 10.9.5) was most recently at apple, the logic board has been replaced. shortly after that I came back, he began to stop once unplugged. Re-start works, but only for a minute. system report states that, whatever it is the air out here? Sounds like a battery problem, I'm on the original battery, but I thought battery would just shrink, not just stop working.
Information model:
Serial number: D8 * LAZ
Manufacturer: SMP
Device name: bq20z451
Pack Lot Code: 0
PCB batch number: 0
Firmware version: 406
Review of equipment: 2
Review of cells: 158
Information on this charge:
Charge remaining (mAh): 6432
Fully charged: Yes
Loading: No.
Full Charge capacity (mAh): 6433
Health information:
Cycle Count: 405
Condition: Normal
Battery: Yes
Amperage (mA): 0
Voltage (mV): 12484
Parameters of power system:
Alternating current:
System timer (min): 0
Disk sleep timer (Minutes): 0
Display sleep timer (Minutes): 30
Wake up on the evolution of the ca: No.
Wake up to the opening clamshell: Yes
Wake on LAN: Yes
Current generator: Yes
View Sleep uses Sun: Yes
GPUSwitch: 2
PrioritizeNetworkReachabilityOverSleep: 0
Waiting period: 4200
Standby mode enabled: 0
Battery power:
System timer (min): 15
Disk sleep timer (Minutes): 10
Display timer (min): 15
Wake up on the evolution of the ca: No.
Wake up to the opening clamshell: Yes
View Sleep uses Sun: Yes
GPUSwitch: 2
Reduce the brightness: Yes
Waiting period: 4200
Standby mode enabled: 0
Hardware configuration:
UPS installed: No.
Charger AC/DC Information:
Connected: Yes
ID: 0X0100
Wattage (W): 85
Review: 0x0000
Family: 0 x 0085
Serial number: 0 x * 4bd
Loading: No.
< personal information under the direction of the host >
Hello marc cardwell,.
If your MacBook Pro stops unexpectedly when you unplug your charger (despite correctly recognizing your installed battery), it can help restore his MSC and NVRAM.
Reset the management system (SCM) controller on your Mac.
https://support.Apple.com/en-us/HT201295How to reset the NVRAM on your Mac.
https://support.Apple.com/en-us/HT204063Sincerely
-
Video of the MacBook Air to accuse by unplugged (current running off battery)
Hello. I have a Macbook Air from 2012. The Macbook works perfectly fine when it is plugged, but the minute I unplug the unit, some video that I might be streaming suddenly freezes, even if sometimes the audio is not yet. Weird. The battery works, even if it runs in less than an hour. It has a cycle of 657 counter. The battery health is diagnosed as being 'good '. Anyone know why this is happening and what I can do about it?
Thank you.
Apparently, the MacBook Air is electric rationing of the battery through the
all of the GPU, CPU, free wireless internet, open, applications and requirements
Mac OS x itself; so many invisible things are underway in the background.
Have you looked into the specifications of profile of electrical system and battery
where the status of the battery is spelled in milli-ampere-hour charge remaining
and expected full load capacity?
I imagine that the battery can be replaced; also if SSD drive
is full of stored content, the effort it takes the system to find the space
for swap files and read/write then in the storage disk, is your MB/Air tax.
Maybe an upgrade of the hard drive (SSD) ability is something to check
in (if it is possible to upgrade) or just be sure to not have much stored on board.
A replacement may be obtained from the macsales, OWC, among others.
Also make sure that the MagSafe connectors are clean and free of debris on both sides
the AC adapter and the DC-in Board (on the computer).
For more information on batteries for portable laptops, & magsafe Chargers:
• About batteries for laptops Mac - Apple Support
• Laptops Apple: Troubleshooting MagSafe adapters - Apple Support
If yours is a model 11 inches, total expected her battery life cycles are less
as the largest 13-inch model (with the largest capacity of the battery + request) if the
County of 657 (of max. 1 000) can be decreased if the computer has never been
Let it run until the battery is dead. ~ Or if the storage environmental conditions or
use, have marginalized the ability of the computer to function in the plug.
• Reset the management system (SCM) controller on your Mac - Apple Support
• How to reset the NVRAM on your Mac - Apple Support
The SMC reset (and sometimes reset NVRAM) can help with the battery power
management in general; but the battery may be suspect. The battery charge
includes everything in the MacBook Air; brightness, audio volume, so the screen
the use of Wi - Fi, other applications that run in the background; also the antivirus or other
analysis software running needlessly in the background, using cycles CPU. The
battery may be getting a workout. More so, if you run games or any other active content.
You could look at the activity monitor to check the different points under your control
who may be using resources; all this that consume energy are suspect. Some of them are
more in your control than others. the system manages several outside of your access.
An Etrecheck report generated when the unit is running under the battery and another
When operating on current alternative, can be useful. If nothing else, to see what is
installed in the computer and its running configuration specifications. The load can tell a story.
There is also perhaps adware or other software that affect the performance of the Mac;
This may include antivirus, and if cleaning applications have been executed, they can damage the OS X.
A free to use app, formerly known as "adware medic" now malwarebytes, can help:
•Malwarebytes | Malwarebytes Anti-Malware for Mac
https://www.Malwarebytes.com/antimalware/Mac/
Malwarebytes Anti-Malware (was AdwareMedic) return of experience helps you get your Mac.
Hard to say exactly what is happening. -If it were mine, I would look in different details.
-
Half the Office disappears when you unplug the external monitor
I have a MacBook (early 2011) with a single office shared between two monitors - with one hand on the internal screen and the other half on a Dell 23 inch. The Dell is my first when I use both at the same time. Until a few months ago, when I unplugged the external monitor, all windows automatically appears in the monitor to the laptop, including the menu bar and dock.
After an operating system upgraded a few dos systems (I'm on version of El Capitan.6), when I unplug the screen seems not to register - in other words, the left side of my office, including the menu bar and the dock, and all the apps that were there just to disappear. So my laptop seems to think that the other view is always connected and direct, unless I restart with the detached monitor. (I unchecked 'Displays have separated spaces') in Mission Control.
Is that what I can do to force the Office to redesign the internal screen? (Note that the display is a Dell S2330MX, which seem not to support any Mac OS - so who could answer the question here.) Thank you
I've known who issues from time to time, try to close and reopen the lid, which needs to redraw your office.
-
My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?
The next time you see the flashing light amber...
Open Finder > Applications > utilities > AirPort Utility
Click on the image of the AirPort Express
If you see a button update, click on update the firmware on the airport
Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.
-
MacBook Air will not recognize Micro SD disk in the format exFAT
Hello
I have a new camera of Campark Xtreme (like a Go Pro) who uses a Micro SD disk in ex FAT format. My 3 year old MacBook Air does not recognize the disc in this format. But to reformat, I need to erase all the content on the disc. When I put the disc in the camera, the camera will not work unless I have reformat the drive for exFAT.
My computer is 10.10.5. So my husband. We have the same problem on two laptops.
Anyone have any ideas?
The Mac can read and write to exFat without problem. The problem is probably that the card is too recent for the readers into your computers.
Fortunately, a new stand-alone USB drive which takes care of these maps is cheap.
-
Transport CANADA needs to be unplugged/replugged all morning for TM can find the backup on TC drive?
Every morning my 3 Macs can't find the backup on my Time Capsule drive. (All devices with the latest updates.) So I have to do the following:
(1) unplug the TC. Wait a minute, then plug it back.
(2) open TM preferences all 3 computers, select disk, enter the password, then TM detects the drive and backups run all day.
(3) in the morning, I wake up and the computers can't find the backup disk?
I unchecked the box in iCloud to use back to my Mac. I deleted the backup TC drive and started all over. I did a hard reset on the TC.
I have an old Modem ARRIS Xfinity of 2 months, model TG1682G wired for my 2 TB Tower Style TC running version 7.7.7. that is in fact attached to my computer ethernet cable main life. All 3 computers running 10.11.6.
Any ideas?
Thank you
Try to remove any back to my time Capsule Mac entries, according to the guidelines of this discussion: https://discussions.apple.com/thread/7637445
If you cannot see the TC in Airport utility, unplug the cable to your modem and restart-if the TC does not see Apple to my Mac servers, they cannot plant the Bonjour service in the TC.
More info here: https://www.macintouch.com/forums/showthread.php?tid=471
I had this problem since last Friday (August 12), and had to re - select the TM drive after removing the entries of the CCMM, everything seems perfect now.
-
signature Mozilla Fire Fox, I was instructed to install a Fire Fox Add On
Firefox will not just offer to install an extension, unless another program, that you have installed wants to install an extension for Firefox, the next time you start the PC or the next time Firefox is launched.
You have something else installed on this PC trendmicro?
http://eSupport.trendmicro.com/en-us/home/pages/technical-support/1058625.aspx
"What is the Trend Micro NSC Firefox Extension?"
The Firefox Extension of Trend Micro NSC is the network security component that is responsible for your program of titanium Web threat protection in the Mozilla browser.There is really no need this type of extension of TrendMicro. Firefox contains this type of protection.
-
I want to know if I can leave my macbook connected at any time without damaging the battery or if I need to unplug it when the charge is complete.
Best whatžs of the life of the battery?
Never exhaust it, load it as much as you can, you cannot overload, just don't let it run out.
-
I downloaded a video of my own using the Firefox Addon to unplug myspace page. It saved in my files, but when I try to open it, I get a message that says: 'a licence was not issued for this computer. When I click 'ok', it brings me to the block Presonus Studio One asking me to purchase a license now. In fact, a licence was issued to this computer, and I understand that there is a problem with customers not getting Presonus does not properly established with the approval of their product. But it shouldn't stop me from playing my own videos on my own computer.
Sorry, never heard of this software before. How are Firefox users able to listen to the music that is created b this software.
A specific package of DRM?
A specific plugin?As may of Adobe Flash?
It seems that you have two plugins Flash for Firefox. Not a good idea because it may confuse Firefox. Try to get rid of the old version.
Shockwave Flash 17.0 r0
Shockwave Flash 16.0 r0Have you tried to get support through the PreSonus for one?
https://forums.Presonus.com/ -
I was on my yahoo email account. Yahoo has proposed an update of Firefox 33. I opted to use and to install. If I remember correctly, when I clicked on it, the screen went black, it said something about encryption (I think), but none of the options that were offered worked (cancel/continue etc...). I tried to forcequit firefox, but it wouldn't let me. I tried to retsart but it wouldn't let me. I finally unplugged the computer and things are back to "normal".
Question: is it a bad idea to update Firefox of Yahoo? Can I have a 'clean' of Firefox version or it's going to hurt later? do I have to restore the old version? I'm not really savvy computer.Yes, it was a mistake to accept the offer from Yahoo to update Firefox. You have probably received their own version of 3rd party. From what I've seen posted here contains the potentially unwanted options.
The only place to get is Firefox Mozilla.
http://www.Mozilla.com/en-us/Firefox/all.html -
Formatting card Micro SDXC for Permanent storage
I own a Macbook Pro retina 15 inch mid 2014 with a 256GB SSD internal 10.11.5 running.
I recently bought a SanDisk Micro SDXC (class 10) 128 GB card with an adapter clever so that I can record it permanently inside the slot for SD card in my MBP. I have about 80 GB of music in my iTunes library and would like to transfer more in this SDXC card, therefore, freeing up tons of space on my disk flash SSD internal.
I do not always plan using SDXC with a PC card, my boyfriend suggested I have format as MAC OS (journaled) to take full advantage of his speed.
My main question for the Apple community is:
Should what plan I use? Partition GUID, Master Boot Record or Partition Apple card?
If I were you, I use partition GUID card.
-
Micro does not work after 9.3.2
Update micro 6 more for 9.3.2,and stopped working for imessage/dictation and Siri. The voice still work memo. I tried several resets holding home and power buttons, turned Siri market, on the removal of noise and goes out. Is this a bug with the new update, or is something else wrong? What can I do else?
Might want to look at this article for suggestions: get help with microphones on iPhone, iPad and iPod touch - Apple Support
If a force restart does not help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:
Maybe you are looking for
-
The size of my account does not add the size of the folders under. Why? How can I solve this problem?
-
with respect to its use and the issue of time to watch on the iphone 6 s
Hi, I'm a bit confused about the use and timing standy on 6 s 16 gb iphone. so my request is as follows: -. 1.) after charging my iphone 6 s, 100%, I use it non-stop Messaging on whats app, Yearbook, online, twitter, without interruption. However, I
-
Cover of the screen closes to easy
My laptop is now 4 years old. When I use my laptop and I have my touchscreen, he immediately falls. Who knows how to fix this? Thanks in advance.
-
BIOS update failed - where can I download BIOS for floppy drive?
Hello After the BIOS update fail by Windows I need to reflash. Where can I download the bios for floppy drive files '? Thanx
-
Vista on Satellite P20 - need graphic driver
Hi, I do not know if I have posted this question before on this forum, but I can't find it please bear with me. I have a Satellite P20. The graphics card is a nvidia fx go 5200. I am now runnig Vista full Edition and you want to install the Vista nvi