Microsoft 3500 wireless mouse causes the computer crashes?
I recently bought the microsoft 3500 mouse - I used the 4000 before on this computer, and it worked well and was a good mouse, so I decided to buy it. I installed it last night (Windows had some difficulties to recognize the software), and it worked fine. I left the USB plugged when I turned off the computer.
I tried to start this morning and my computer froze and did not go beyond the screen initial screen/first of the motherboard - it wouldn't even go to BIOS. It started off fine, however, when I disconnected mouse USB and tried to start without him. Anyone has an explanation as to why this is happening?
Check in the BIOS as to ensure that the BOOT sequence does not list USB before the floppy drive / CD / hard drive.
Tags: Windows
Similar Questions
-
Drains battery in Microsoft 3500 wireless mouse
Hi guys. I recently brought a Microsoft 3500 Wireless mouse. The battery of the mouse jumps on use continues to 6 hours (even if the transmitter is close), and mouse not responding after that. I noticed that the top surface of the mouse becomes very hot during use. I doubt if I can claim warranty coz I lost the transaction receipt. Any suggestions?
Hello
Looks like the mouse has problems.
Wireless Mobile Mouse 3500 - has a 3 year warranty.
http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=019&active_tab=systemRequirementsMicrosoft Hardware warranties
http://www.Microsoft.com/hardware/warranties.mspxThese mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
contact Microsoft at the number below.Hardware support of MS and warranty claims
Tech Support 1-800-936-5700 for MS Hardware.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Code error 1603 when you install Microsoft 3500 wireless mouse
Display in the name of the customer
Code error 1603 when you install Microsoft 3500 wireless mouse
Using toshiba satellite A - 75 Widows XP - based customer ID
Hello
I suggest you to follow the steps in this link and check if it helps:
http://support.Microsoft.com/kb/953691
Check if that helps.
-
I installed the mouse mentioned above on Nov 5 because my old mouse acted erratically when I used the scrolling feature. The new mouse does the same. How can I fix my PC/mouse to scroll properly?
The Feedback forum where you have posted this question is for comments on the Microsoft Answers site. As your question is about the hardware of Microsoft, I'm moving it to the Hardware forum.
-
autonomy of the Microsoft 3500 wireless mouse
I bought this mouse 3 weeks ago, simply because he said the battery life 8 months on the box and the battery is dead. It comes from * do not buy it.
Hello
I suggest you to go through the following Microsoft article to replace the Microsoft.
How to replace Microsoft software or hardware, order service packs and replace manuals:
http://support.Microsoft.com/kb/326246
You can provide feedback for this product, so that we could work on it and further you assistance.
Microsoft Hardware: http://www.microsoft.com/hardware/en-us
Note: click on share you comments and share your comments.
Hope the information is useful.
-
The Microsoft 3500 wireless mobile mouse settings do not work.
Original title: the mouse settings do not work.
I had a mouse Microsoft Optical Wheel for several years and several computers. I got the wheel button double-click on the value. The mouse does not so I had to buy a replacement. I found a Microsoft 3500 wireless mobile mouse, I couldn't find a wired mouse anywhere. I downloaded the center of control of the mouse and adjust wheel double-click button. It is not double-click. The setting is in the program, the rest of the mouse buttons work ok, but he won't just double-click even if the program says it is how it is defined. Windows 7 Edition home premium, door of entry DX4860.
I guess Microsoft has known there was a problem after all, the last batch of automatic updates seems to have fixed.
-
Original title: right click on the mouse itself activating
I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.
I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.
Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?
Try to install the drivers from this link and check.
http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167
-
When I start the system upward, it goes to my logon screen and the computer crashes
I have a windows vista computer and when I start the SUST until it goes to my login screen, I connect the Welcome screen comes the computer hangs... I do a control-Alt - Delete that returns the desk top
When you get on the desktop, open the start menu to search msconfig and press ENTER.
When the popup window appears, it should start under the general tab, and you should see normal startup. For now, set it to start diagnosis, press ok and restart the computer. If it still crashes, then replace the and set it back to normal startup, as something else is causing this problem.
If she does not hang, and then back up the, set back to normal and this time go to the Startup tab. The list is all the things that are set to start when you start your computer. One of them is causing the computer to crash.
If you have an idea that it might be that you can deselect it, apply, then reboot and see if it still crashes. Or you could just go in the list, one at the same time turn them off then restart suspended far, so you know which is the cause.
-
installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you
Wired or wireless - is usually not serious unless the wireless can get more interference. If the keyboard is close to the receiver which is connected to the computer and you get the strikes hurt - my suggestion is to try first the keyboard on another computer.
To do this, * not * require you to install specific drivers. Simply unplug the combo of a computer and in the other and see if the keyboard works correctly. Then, you can troubleshoot from there.
-
Blue screen after the computer crashes
original title: BSOD: Blue Screen Of Death
My PC has run completely fine until here that is 2 years from the date of purchase. But now these BSOD concern me. The computer crashes, the graphics have become distorted [I am unable to read anything] and then GRASS comes... I can't read because it is very blurry... Please help me... I can't read the minidump files ' coz I don't know how we debug tools. Please help me!
Hello
The first couple of line indicates a problem with your Nvidia video drivers, so that would be the starting point. Download and install a fresh game, update for your system here:http://www.nvidia.com/Download/index.aspx?lang=en-us
Uninstall the current set through the configuration/programs and features Control Panel, then reboot and install the new set. Do not install only the new on the 'old'.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
scrolling feature 4 way in Microsoft 2000 wireless mouse
Hi, is it possible that I can scroll the 4 way to the average browser left back and the browser just before? Logitech can do that, but it can also do?
Original title: Microsoft 2000 wireless mouse
Hello
Thank you for your update.
I apologize for any misunderstanding, according to my research on the issue. In this case, I would say contact Microsoft support hardware for control over the issue. It is dedicated to products from Microsoft support and they would be more likely to help you.
Hope this information is useful. Please do not hesitate to post, in this case, you are facing other problems with Windows in the future. We will be happy to help you again.
-
I bought a logitech keyboard and mouse.
I contacted support and they work in another machine (vista), they say, that there is an error on this machine.When the connection to the wireless receiver, it shows and installs in windows 7 64 bit home edition premium, however, unifyier of logitech software can not see a receiver is connected and so I cant pair the keyboard and mouse to the computer.I've tried different usb, front and rear ports and USB 2.0 and 3.0, but there is no change.Any ideas how to get this to work on windows 7 that I checked and the devices are compatible with my version of windowsOriginal title: keyboard and wireless mouseI suggest to download and install the Logitech Unifying software and restart the computer and check if it makes a difference. Logitech Unifying software lets you manage your devices that use a Unifying receiver. You can add or remove devices using Wizard of the software or to use advanced mode. The Advanced mode also displays the status of your paired devices, version of the firmware and battery level.
-
try to uninstall service pack 3, but the computer crashes
Service Pack 3/Pagemaker problems
I am running Windows XP Home Edition. None of the Adobe CS2 programs allow me to open the old Pagemaker files. It gives the error message: file is damaged. According to my research, the problem with Service Pack 3. The research also tells me that the solution is the removal of the service pack.
When I try to remove Service Pack 3, the computer crashes. Are there other solutions?Problem is not with the help of CS2 in itself - it works fine... Apart from the fact that none of the CS2 programs will allow me to open Pagemaker 7 or old Pagemaker files.
Who should have nothing to do with the level of service pack for XP!Yet once, if there is a problem, uninstall and reinstall CS2. But as you know, CS2 is quite old and is no longer supported. If this feature is important to you, I guess using the current version would be the way to go. -
Microsoft Security Essentials is causing the Defender to stop working?
Microsoft Security Essentials is causing the Defender to stop working? can u help me with this?
Microsoft Security Essentials is causing the Defender to stop working? can u help me with this?
Nothing to help.
Answer has been given to you as to why MSE stops Windows Defender. In short, you don't need Windows Defender when you have MSE.If there is another reason why you need to activate Windows defender, please after return of reason.
-
the computer crashes (off) whenever I try to sync to iPad via iTunes
the computer crashes (off) whenever I try to sync photos with iPad via iTunes. Synchronization of fine music. I uninstalled and reinstalled all apple applications and have the latest version I have iTunes.
See the following article: http://www.apple.com/support/itunes/ and the links it contains.
If this does not help, contact Apple tedhnical support to the: http://www.apple.com/contact/.
They should be able to help you with your problems. They are their products, and the problem seems to be with them and not with Vista.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
evil due to the non-standard layout keyboard shortcuts.
I use a not standard, configuration of keyboard not QWERTY, from Dvorak to the developer by Roland Kauffman (for that "ddvorak").Shortcuts keyboard seem to be messed up, and I can't understand how to make them grow.On a standard web page, hit CTRL +
-
Hello I wonder if it's possible a streaming of data in a memory connected to the port USB 9063 cRIO. My application is currently broadcasting data in a circular buffer implemented in the host Pc, using network flow. I need data from 24 channels sampl
-
Strange program folder & kyyiuio.exe in the Microsoft folder
HelloI have a folder strange back opens and runs at first upward before disappearing called kyyiuio.exe. Have you tried search engines but no knowledge out there. When I looked, I managed to screenshot it-located in the folder - users - owner - Appda
-
uninstall the printer canon IP4200 of W/WINDOWS XP driver
If I uninstall the driver &, reinstall and hope this fixes the error 6500, repeat hope
-
I wish I could plug the functional need for a port and DVI monitors who does not reside in the motherboard. Thank you.