Microsoft Fix It returns an "unexpected error".
Microsoft Fix It returns an "unexpected error" when trying to fix the Windows Update. What coud cause this?
Hello
1 did you change on your computer before this problem?
2. what operating system is installed on your computer?
What version of the operating system Windows am I running?
I suggest you to ask your question in the link below.
Microsoft Fix it Center - NOT for general support questions
http://social.Microsoft.com/forums/en-us/fixitcenter/threads
Tags: Windows
Similar Questions
-
Microsoft Fix It gives me an error "input string was not in a correct format" whenever I try to run it. Run Windows XP Home addition, version 2002, service pack 3.
Hey H West.
The forum below would be more suited for that matter.
Microsoft Fix it Center - NOT for general support questions
http://social.Microsoft.com/forums/en-us/fixitcenter/threadsKind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
My Windows telling me that he needs 11 updates. These consistenly updates fail and the Microsoft fix did not work. Error codes are 641 and 80070641.
Hello
Did you change your computer before this problem?
You can follow the suggestions and check out them.
Method 1
You can follow the procedure in the article.
How to resolve problems connecting to Windows Update or Microsoft Update
http://support.Microsoft.com/kb/818018
Method 2
You can reset the Windows Update components.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registryHow to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 3
You can download and run the system update readiness tool.
Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
http://support.Microsoft.com/kb/947821Method 4
Step 1:
Place the computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual
Step 2:
You can manually download and install updates from Microsoft Download Center.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx
Method 5
You can disable temporary of your security software.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks
See also:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work. I use Windows Vista Home top. Please provide me with a fix for this problem. Thank you
Hello
What type of material is actually causing the problem? Is there more information the Fix It center offers you?I would have a look at the article I have below the link and go ahead and run a update of Windows on the PC.I hope this helps. -
The search returns an unexpected error
I just did a fresh install of Windows XP Pro/sp3.
The research and the companion does not work. It returns an error message which: unexpected error: action could be completed.
Disabled the indexing service (using the companion anyway). Same result.
I first tried this:
Start > run > cmd [Enter] [command prompt opens]
regsvr32 jscript.dll [Enter]
Regsvr32 %Windir%\srchasst\srchui.dll [Enter]I got a positive result on each attempt.
But the search is the same. No error message just looking.
Then I tried the Windows\inf folder for the srchasst.inf file, right click and choose Install. He asks me the SP3 CD, but when I insert that, he won't find the file msgr3en.dll on disk. So he did not finish.
No idea how to get the search works again.
Thank you
Carl
Hi Carl,
Follow these methods.
Method 1: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Method 2: Create a new user account.
How to create and configure user accounts in Windows XP
http://support.Microsoft.com/kb/279783
If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.
How to copy data from a corrupted to a new profile in Windows XP user profile
-
Cannot run Microsoft Fix - it, I get an error of end tag.
Original title: Fix It Center.
I tried to down load Microsoft set the Center and I got I think an end tag error when charging down, I deleted the program and tried to reload and now I get what looks like it is loading, but it seems that it is mowing and sometimes get the code on page then on this page it show there was a problem and try again. As you see that I'm not that good with computers so I need something good advise.
Hello
I suggest that you go through the following information.
Fix it Center Beta for users of Windows 7 is now officially closed. If you are running Windows XP or Windows Vista, you can continue to participate in the fix it Center Beta. If you already have an account Microsoft, please login to access your account. Otherwise you can create a Microsoft account and go further.
Microsoft fix it Center Online.
http://fixitcenter.support.Microsoft.com/portal/FindSolutions
Welcome to the fix it Solution Center.
http://support.Microsoft.com/FixIt/
If you need help on Microsoft fix, please post the thread in the following link.
http://social.Microsoft.com/forums/en-us/fixitcenter/threads
-
Update for microsoft works failed, error code 646. I tried microsoft fix - it for windows update got error code 0 x 80040154, context: high
-
DVD - CD Microsoft Fix - it give me an error code 0 x 80040154
I can do a backup with my WD external drive but I can't do a backup with a DVD. I can read DVD and CD, DVD - CD Microsft Fifix - it gives me and error code 0 x 80040154
See this thread:
Solve this error code 0 x 80040154
http://social.Microsoft.com/forums/en-us/fixitcenter/thread/c8e099b4-d48f-494c-9baf-83d93e8740fd/ -
When you try to download a driver for my printer, I got the above message. How to solve this?
Hello1. is your computer connected to a domain?
2. only the problem occurs when you try to install other software/drivers as well?
3. What is the model number and name of the printer?I suggest you to check if the Windows Installer Service runs in the Services.msc window.
a. Click Start; In the start search, type "Services.msc" and press to enter.
b. right-click on Windows Installer and click on Start (only if the Service is stopped).
Restart the computer and try to install the driver.
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Cannot run Microsoft FIXIT error: "an unexpected error has occurred.
Title: Microsoft Fix it fails
Hello
Whenever I try to run Microsoft Fix it, I get an error message saying something like "an unexpected error has occurred. The fix that it Wizard cannot continue. "I used to see if the Fix, it would help solve the problem of update that take place on this Dell Inspiron laptop running Windows Vista 32-bit Service Pack 1 with Norton 360. I thought that I had made progress on the issue of the update, but now they are all fail during installation, including Service Pack 2.The Dell PC Checkup shows as operating without any problems portable equipment.Thanks for any help that can be offered.Kind regardsRoxy111Hello
-What is the FIXIT you have tried to solve this problem?-Do you have problems with the installation of the Windows updates?-You receive an error message while trying to install updates?-You are aware of any changes made on the computer before this problem?Step 1: I suggest you to see the link below and cehck if the problem persists.FIXIT solution CenterStep 2: File system (CFS) CheckerSFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
(a) click Startand type cmd in the box start the search.
(b) right click on cmd in the programs list and then click run as administrator.
If you are prompted for an administrator password or confirmation, type your password or click on continue
(c) for the command prompts, the following line and press ENTER:
sfc/scannow
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?
Step 3: Clean bootI suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to configure the computer to boot:
http://support.Microsoft.com/kb/929135
Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.For reference:Information about Service Pack 2 for Windows Vista and Windows Server 2008Hope this information helps. -
I can't use the convenience stores in the Panel and trouble getting my printer to re - install, when I click on devices and printers in Control Panel, rather than load him immediately, a green bar moves along the top where devices and printers are, but you can click on the choice and it will load If I go in safety in the Panel and choose troubleshoot, I get the error message, an error is produced so that download troubleshooting, or an unexpected error has occurred, the Troubleshooting Wizard can not continue. When I tried to access microsoft fix - it, I get the error message, troubleshooting cannot continue because there is an error, runtime error, code: 80040402, also 0x800B010E error codes. I am running windows 7 service pack 1 on Dell Inspiron laptop. I'm pulling my hair out! Help, please!
Hello
1 did you changes to the computer before the show?
2. which antivirus is installed on the computer?
I suggest you follow these methods and check.
Method 1: Perform clean boot using the suggestions mentioned in the below mentioned link.
http://support.Microsoft.com/kb/929135
NOTE: once you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.
Method 2: Run the tool (SFC.exe) System File Checker and check.
Follow the shape of measures the following link: http://support.Microsoft.com/kb/929833
See also this link to resolve script errors in Internet Explorer
http://support.Microsoft.com/kb/308260
Method 3: Perform a full scan of the computer using the following antivirus applications.
Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
If the method above does not work, proceed to the next method.
Method 4: Check the functionality in another user account.
If it works in a different user account, then the user account is damaged.
Create a new user account, copy files to the new user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
I hope this helps!
-
Get an unexpected error during the search in the Explorer
When I use the search in the Explorer returned an unexpected error. I can just reinstall study or what I have to reinstall XP?
Event 3024 is in the right place. I did some research but I need of a few more that now needs to be tomorrow.
Event ID 7026 is probably unrelated to your research problem. Three records relate to your CD player and the software Sonic (Roxio). What Roxio software is installed? Uninstalling and reinstalling may solve this problem.
-
Not able to install microsoft fix it
I have Windows 7 and I am trying to install Microsoft Fix It. I get the error message "unable to download trouble shooters. Check the internet connection. "My internet connection is OK. Any ideas as to what I should do? Your help would be greatly appreciated. Thank you.
Hi Dianne,
The problem you posted is tied to Microsoft Fix, so it would be better suited in the Microsoft Fix it community here: http://social.microsoft.com/Forums/en-US/fixitcenter/threads
Thank you.
-
Original title: cannot run Microsoft Fix It to Program_Install_and_Uninstall
When I run Microsoft Fix It for Program_Install_and_Uninstall, I get "we're sorry, but we encountered an unexpected problem, one or several upload components and cannot run the troubleshooter now...» »
Hello
Why you try to run the fix it tool?
Post to fix any problem with Microsoft tool in Microsoft Fix it Center forums.
http://social.Microsoft.com/forums/en-us/category/msftsupporttools -
When I try to run Microsoft Fix it automated troubleshooting services, I get - "we're sorry, but we met an unexpected problem and cannot complete this diagnostic solution." I ran before with great success, but it did work for awhile now. I can't understand how uninstall/reinstall, or how to solve why it does not work for me any more. I run Vista Home Premium. This problem has happened to others?
original title: Microsoft Fix it does not workHello
Are your logged as administrator?
What I wanted was otherwise, what issues are having you? Why do you need to run a Fixit? This could
It does not lead to why the FixIt.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
I would also like to launch SFC and Chkdsk to ensure that corruption is disabled.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------
Perhaps an installation problem.Spotlight utility Windows Installer CleanUp Utility
http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspxDescription of the Windows Installer CleanUp utility
http://support.Microsoft.com/kb/290301Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=enHope these helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Memory Manager virtual incorrect declaration of free space
In Windows 2008 R2, I am trying to move the paging file on drive E: which is 4,09 4,09 free TB TB.When in virtual memory Manager, I click on drive E: it see the Space Available: 97602 MB.I have 128 GB of ram in the server, and it's not enough space f
-
In the upgrade the operating system from Vista Home Basic to Win 7 Home Premium (64-bit), all seems to work fine EXCEPT that the device manager says no driver installed for the memory FLASH PCI (3 input lines) and try to reinstall it with internet se
-
Lost 13 Alienware command center
I recently reset my Alienware 13 and I lost my Center of command and Alienware FX. I was wondering if there is a download so I can get back them on my computer.
-
Cannot use ReadyBoost, the flash player (caches cannot be created)
I tried to use ReadyBoost to add 1902 MB memory for my Toshiba Laptop.When I hit apply it began counting can stop and displays this message: Cache creation failed Failed to create the cache. The system cannot find the specified file.
-
Hello. I'm having a problem with the text in PSE14. All text is type in capital letters and spacing is not correct - it is too far away. I don't have to do anything fancy, just type normally and it worked fine until a few weeks ago. I don't know if