Microsoft IAS 2003 login authentication problems
I searched and searched for an answer to this, but noghting seems to work. I have IAS authenticate users for authentication of connection on 1230ag access point and switch 2950 using Active Directory for the user database. I works very well except for the fact that I can't get the device and the IAS to send the user directly to the mode even after the addition of the "shell: priv-lvl = 15 ' attribute from seller to the access policy. Will someone report the steps that have worked for them that allows the authentication of connection AAA with local users to a backup database? Any help would be appreciated. I would add that I can only access level 1 on the console, telnet and web interface (AP) and I was debugging on the process of the AAA and although I did not copy it in a txt file it looked as if the ' shell: priv-lvl = 15 ' reached the AP and the switch. Thank you.
I understand, you have the 'Permanent', the device list.
Add following the order. If you make changes in your configuration. I ask you to also provide the configuration changes.
Add the commands
username privilege 15 password
RADIUS server host key
AAA authentication login default local radius group
AAA authorization exec default local radius group
line vty 0 4 or line vty 0 15
by default the authentication of connection
lack of authorization exec
Kind regards
Prem
Please rate if this can help!
Tags: Cisco Security
Similar Questions
-
Microsoft Server 2003 Causing me Problems
OK, I used to use internet connection sharing on my laptop through a router connected to my computer through the modem Ethernet to my computer but now after the update to Microsoft Server 2003 he doesn't share not the internet EACH THING of ANOTHER IS AS IT SHOULD BE AS IP, WAN, DRIVERS, etc.
Hello
Your question would be more by experts Windows 7 IT Pro Installation, Setup, and deployment Forum. Check out the following link.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
Cairngorm login authentication problem
Hello
Currently I am doing an application that allows a user to log on and according to their level of authorization, they may have full access to the application or have limited access.
Currently I have implemented so that when the user submits their login information, I send an event that calls the order login and connection delegate validates the result, if successful, then it updates a variable called loginAccess in the model.
In the main mxml, I put in place so that when loading first the currentState property is related to the loginAccess in the model, so when we connect and succeeds then the variable loginAccess is updated, which then updates the current state of the main application. It works fine, totally in function logout simple connection, but I need to present the viewer with something different based on their permission level - allowing the entire application to be accessible if you are an administrator and one that is destined to a comments user who can only see parts of the application.
So what, in my opinion, would be the easiest is if the user is prompted, then I can hide or remove some controls and components like tabs, buttons and labels that are not allowed if the user is an administrator and do nothing are.
This is my problem, I have no way to determine if a user is a guest or an admin at the point when the user first connects.
In other words, if I do an if/else statement such as: If the user is prompted and then remove the 2nd child of the tab navigation, then I have no the case in my main application to call it, because if I call to creationComplete it is too early, the user has not connected...
I am making sense here?
I wonder if I can send some sort of an event of the LoginCommand once the authorization of the user is determined that will then trigger a function in the main mxml which will exercise a function to remove components (if they are a guest), but I don't know how to do this as when the user first connects the connection event is dispatched by the connection component and not the main mxml.
I do not know if my approach is the best way or if there is a better way.
Please if anyone has any suggestions that would be great,
I created this application a few weeks ago completely in flex and am now converted to cairngorm as an exercise and everything is done except for this part.
Thanks in advance for any help!
Fuyuko
public var openTasksComp:OpenTasks;
his only declaring a variable, uninitialized.
you have to match to your model by
-
Authentication problems with PEAP WLC IAS Windows 2 k 3
Hi all
I configured a WLC (6.0.182.0 model 2100) with authentiacion PEAP with IAS and DA of Microsoft Windows 2003. I read in the documentation "PEAP under Unified Wireless networks with Microsoft Authentication Service IAS (Internet)" in the process of installing Active Directory, it must select the "Permissions compatible with operating systems prior to Windows 2000 server". In my scenario the other option was selected "Permissions compatible only with Windows Server 2003 operating system or Windows 200".
I test this scenario and it does not work.
Is there a configuration in the WLC so that it can operate without having to reinstall the AD?
Thank you
In most cases the WLC does not care about the type of authentication is used. It's really just the transmission by proxy requests between the client and the Radius server.
I'll make sure that your timer EAP are extensive with the commands:
Advanced Configuration eap identity-request-timeout 10
Advanced Configuration eap request-timeout 10
-
I've purhased Notebook Satellite P20 with Microsoft Office OneNote 2003. My problem is that I can't update OneNote 2003 SP1 (Service Pack 1) from the Microsoft Update page. Microsoft said that I need the assistance of Toshiba because I have the OEM version of OneNote 2003 program. What I need
do?
Urpo BafverHello
I found something very interesting for you.
Preinstalled MS OneNote cannot be updated for Service Pack 1. When an update or reinstallation of Microsoft Office OneNote on the laptop, the following error message may appear:
"Installation of Microsoft Office OneNote cannot continue because the installation source has been corrupted."Try reinstalling Microsoft Office OneNote from the Toshiba Recovery DVD. OneNote is present on a more recent version of this DVD, but not on the first version. If Microsoft Office OneNote is not present on the Toshiba Recovery DVD, then follow these steps to resolve the problem:
1. Locate the product key Microsoft Office OneNote, on the certificate of authenticity provided with your computer.
2. uninstall Microsoft OneNote, through the Add/Remove Programs applet in the control panel (start > settings > Control Panel > Add/Remove Programs).
3. download the Microsoft Office OneNote 2003 trial on the Microsoft website:
https://Microsoft.order-4.com/onenotedl/welcome.asp?ID=front
4. install OneNote 2003 trial, using the product key from the certificate of authenticity located in step 1 instead of the product key listed on the Microsoft Web site. The product provided by Toshiba key unlocks the full version of OneNote trial version is a part of.More information: you can find:
http://support.Microsoft.com/default.aspx?scid=kb;en-us;875556
Good bye
-
4402 controller and Microsoft IAS
We have recently installed a 4402 WLC and all our standalone AP improved to of LWAPP. Each of the previous AP had an entry in IAS Radius. Can they be deleted without IAS problem now? As far as I can see IAS logs all authentication requests are received from the WLC only.
If I remove them, it will allow me to add other Cisco devices in IAS since Microsoft sets a limit of 50 customers.
I was not able to find a definitive answer to this in the documentation.
I have no connection to this, but yes, you can remove your Radius server's individual access points.
Authentication is now managed by the WLC and IAS Radius.
HTH
Steve
-
running Windows 7 to have seven important updates for microsoft office 2003 that none will install due to error 646 code can't find a simple forum solution... can anyone help?
A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatic Microsoft Fix it 50461 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/2258121>
Please let us know if that helps.
-
Now, I can not uninstall, repair Office 2003 or 2007. and my microsoft office 2003 documents are less error out when I try to open them.
Hello Answerspls09,
Thanks for providing the information.
Solution:
__________________________________________________________________________________"You receive an"Error 1606"error message when you try to install or remove a program from Microsoft"
http://support.Microsoft.com/kb/886549
__________________________________________________________________________________
["Windows Installer Error 1606" error message when you try to launch help in Office 2000 programs]
http://support.Microsoft.com/kb/313257
__________________________________________________________________________________That should solve your problem.
Thank you. UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C
-
Why is it I can't install microsoft office 2003
Hello I tried to install microsoft office 2003, but each time it finished installing it freezes then I have problem to cancel and have to shut down pc, really need assistance on this issue installed before but I have been having trouble mind and I uninstalled it.thank you
If there was a pre-existing and problem that you use a real Office CD which translates a gel after installation, it would seem that you have a hardware problem
-
Missing Microsoft Office 2003 product key
I have Microsoft Office 2003 on an old computer that was given to me. Microsoft Office 2003 has never been installed on this computer but when I try to run it, it asks for Product Key.I never had the CD and the owner before me did not. How I can fnd the product key, or I can get around it somehow?
Hello Arnie,
You will need to contact the previous owner of the product key if he or she had brought the Office 2003 program. Incase if the program is not authentic and the previous owner is not a product key, then you can buy the Office Suite and then you can install it on the computer. You can get the latest Office Suite which is available in the following links:
http://Office.Microsoft.com/en-us/
http://Office.Microsoft.com/en-us/buy/
Hope this information helps.
-
Original title: updates regarding
Hello... when I turned off my computer at night, I get a message that a "update" is available (I have Windows XP) and to not turn off my computer and when dowload is done mty computer turn off automatica; LLY... so I say OK and let go... what happened two weeks ago, and every night, I get the same message... I do not think that the download has been completed properly... Well today, I had a can if display I have to download something and I said 'OK' and he started the process and finally, when it ended, I received this message 'a security update for Microsoft Office 2003 (KB2598361)"unable to be downloaded... so I was told to go to Mister FixIt... I did... Well, nothing happened except that I don't think that the download has been done...The tech I used to come and checkl my system is no longer in our world, so I'm stuck... "aging" & "senile :-) "not reallt this last... but I'm no tech and need help that is clearly written for users who do not know a lot on ' computer subtleties! »
If any help out there in "cyberspace" would be welcome! Thank you!
Gino
Hello
Were there any changes made on the computer before the show?
Method 1:
I suggest you to refer to the article and run the Microsoft Fix it:
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/
Method 2:
See the article and check if that helps:
Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
-
A security update for Microsoft Office 2003 (KB2598361) cannot install with error Code: 0 x 80070643.
He did this repeatedly over and over again all week.
How can I fix it?
Hello
Method 1: download and install the update manually and see if it helps.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=30294
Method 2: Perform the steps from the link below and see if it solves the problem.
Hope this information helps.
-
Security for Microsoft Office 2003 (KB2598361) update is not installed
What to do when the update of security for Microsoft Office 2003 (KB2598361) is not installed
There is another thread that gives a possible answer to this failure of the update, namely the LocalCacheDrive for Office11 points to a drive that is no longer connected to the system. Microsoft Fixit does not detect this problem.
See here for the discussion: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/error-code-52f-when-installing-kb2598361/e83fac9a-5da9-4628-9a51-c8ba7fdcab77
It may be worth checking.
-
Update of security for Microsoft Office 2003 (KB2598361)"on XP. 0x51F error code
I have problems with the installation "A security update for Microsoft Office 2003 (KB2598361)" on Windows XP. The error code is 0x51F. I tried Microsoft Fix It, but the solution that we found was not working. Any ideas?
Hi Lyndon,
Which Microsoft Fix - it you tried to solve this problem?
I suggest you to follow the steps from the link and check if it helps.
-
Could not update security for Microsoft Office 2003 (KB2584052)
For some reason any my laptop win XP will not install the 'day of security for Microsoft Office 2003 (KB2584052)"someone knows why this will not be installed?
Hello
- Did you of recent changes to the system before the show?
- You are able to install other updates to Windows?
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Restart the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
http://www.Microsoft.com/download/en/details.aspx?ID=27390
Method 4: Reset windows update components.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 5: Follow the steps in the article.
How to troubleshoot incidents to update your installation of Office on the Office Update Web site
Maybe you are looking for
-
How can I download my mac to my iPhone photo album 6
How can I download my mac to my iPhone photo album 6?
-
Relay using the temperature control
Is there a code example using a TC 120 to control PS RLY 420 FP? I am trying to enable / disable a device by using the temperature.
-
Original title: identity of unknown folder During execution of the backup and maintenance on one of my computers (Windows xp home, sp3), I noticed a folder and the file that I can't identify. The name of the folder is cc68f6b7a7ca948eefb018f001 and
-
Blue screen with message 0X0000008e...:)
Almost all the time my Virus Scanner (G Data Internetsecurity of 2010) DOE a regular analysis the computer falls down after about 20%. The deadly blue screen comes with the technical info: 0x0000008E (0xc0000005, 0x8c0e2d25, 0xe4467a8c, 0x00000000 Sy
-
HP deskjet 1050 J410 print function does not not after reboot
Product: HP Deskjet 1050 All - in - One J410 series PC system: Win Xp Sp3 I followed the instructions to install, after installation, the print function and scan function is working. But whenever I restart my pc, the print function disappeared and di