Microsoft Office 2003 updates are installation failed with the error.

Similar Questions

• running Windows 7 have seven important updates for microsoft office 2003 won't install because of the error code 646

  running Windows 7 to have seven important updates for microsoft office 2003 that none will install due to error 646 code can't find a simple forum solution... can anyone help?

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatic Microsoft Fix it 50461 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/2258121>

  Please let us know if that helps.

• Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

  Windows colleagues for support.

  My windows install/windows update is broken; There will not be security critical update, installers fail with the error

  code 1, indicating a problem with language packs; I use widows 7 pro for software development.

  Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

  More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

  Hand, install the update package out of work.

  Your opinion is welcome. I have

  Hey Hey Hey Doc K whadu say?

  I solved my problem;

  the problem was owner and permission on my programs, all users, the program data and my programs (86).

  As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

  What have I done? I took possession of the special directories above from "TrustedInstaller".

  Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

  -What happened? Do you have a trusted Installer get stuck Mid-install?

  I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

  USER, AUTHENTICATED USER. I was perhaps too broad.

  I took possession, and then all of the repressed, updates windows are presented themselves to install,.

  and I expect /VERIFYNOW SFC before as I mark this as running.

  I'm fairly certain VS2008 and VS2010 now repair and install.

  Hmmm... always to see funny error message in SFC...

  We need a tool to give an overview of a directory tree ownership and permissions.

  dB

  Hey Hey Hey Doc K whadu say?

• Windows 8 installation fails with the error "the product key entered don't match any available to install windows images.

  I have a Sony Vaio SVE1113M1EB provided with pre-installed Windows 8. Yesterday, my laptop won't start and recovery tools did not work. Then I deleted the partitions in stock and tried to install Windows 8 on DVD. He said: "the product key entered is not one of the images available for installation windows." I wrote my product key. How to install Windows 8?

  Original title: Installation of Windows 8

  Hi Qadir,

  The issue could be due to the supplied product key does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.

  I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).

  You can check the link:

  «Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"

  http://support.Microsoft.com/kb/2796988/en-us

  I hope this helps. If you have any other questions, we will be happy to help you.

• Download works 9 KB2092914 security update and it fails with the error code 646

  Update of security for Works 9, KB2092914, downlaod fails with the error code 646

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

  Please let us know if that helps.

• Vista Sp2 installation fails with the error ASN1

  When I run the installation of SP2 through Windows Update or the standalone version I get the following error «end asn1» unexpected data  Anyone have any ideas?

  I tried everything I can think and find on the web or on TechNet.  I even reinstalled the operating system and the error showed once again.

  Hello RowdyMrB,
  Thank you for visiting the Microsoft Answers forum.
  I suggest you to run a scan of the System File Checker to see if there is corruption in your system from the wrong key of RAM,

  To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Please post back with the last 50 lines of the output JOURNAL.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Acrobat installation fails with the error message: invalid in the specified key State

  Here is the information from the computer system: Windows 7, 64 bit.

  Found the fix. Thanks Nat deer!

  Go to the control panel.

  Select uninstall a program (or programs and features, according to the options you gave).

  Click on the link at left to view installed updates.

  In the search window in the upper right corner of the window, locate KB2918614.

  Uninstall this security update.

  If you have a Windows Update set to automatically install updates, this update will finally get re-installed and you will have this problem again. To prevent this, you will need to go back to the Control Panel, go to Windows Update, see important updates are available by clicking on the link that says "x important updates are available" and uncheck the check box for the security update that you have uninstalled just (it will have the same KM number in brackets (: KB2918614).

• Update Microsoft NET. Part 4 (KB2656368) fails with the error code 0 x 643

  I am running XP SP3.  I now have 4 four Microsoft Update failed with error code 0 x 643.  There are:

  KB2656368

  KB2633870

  KB2604121

  KB2656405

   I have downloaded and run the Microsoft ""FIX " program with the result "an error has occurred and this program can not continue". " (No additional information)  This isn't much help!  Is there someone out there who can help you?

  Mike

   

  Using the "method 1" Microsoft FIXIT seems to go to completion, but updates continue to do not.

  Using the "method 2", repair didn't succeed .NET Framework 4 Client Profile has not been repaired because: generic Trust failure

  Four updates of concern for .NET Framework 4 on XP are:

  KB2656368

  KB2633870

  KB2604121

  KB2656305

  Is it possible to completely remove .NET Framework 4 and .NET Framework 4 extended and reinstall them?   My name is Mike.  Please notify.

  If Add/Remove does not work, then use the cleaning tool, and then reinstall

  Click on the following link to download the .NET Framework cleanup tool:

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
  Downloads for framework if necessary:
  http://msdn.Microsoft.com/en-us/netframework/aa569263.aspx
   
   

• Update Windows again me that there are 11 important to install updates. It fails with the error 80070490, Code and Code 80073712.

  Original title: update Windows problem on Vista 64-bit

  My Windows Update repeat me that there are 11 important to install updates. It fails whenever I have try running with 80070490, Code and Code 80073712 error.

  I tried the Windows analysis tool, the difficulty it tool Microsoft and the web site Microsoft Fix It I have have also run a registry cleaner and that he would follow the instructions of Microsoft to solve the problem of Windows Update by editing the registry, but I get 'Access denied' when ordering fast, even though I checked all permissions.

  The updates are:

  Update for Windows Vista for x 64-based systems (KB972145)
  Update for Windows Vista for x 64-based systems (KB2633952)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2572075)
  Update security for Windows Vista for x 64-based systems (KB2564958)
  Update for Windows Vista for x 64-based systems (KB970430)
  Update security for Windows Vista for x 64-based systems (KB2378111)
  Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930)
  Update for Windows Vista for x 64-based systems (KB2345886)
  Update security for Windows Vista for x 64-based systems (KB967723)
  A security update for .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 for x 64 systems (KB2518866)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2633874)

  I realize that these are not critical updates, but am concerned that, if there is a problem with the update, it will not refresh the critical updates either.

  Any help would be greatly appreciated. Thank you.

  Etherlass

  Hello again,

  Thought I would let you know that I've finally sorted this! :)

  In another forum I read a post from someone who had a similar problem and solved it by uninstalling the "failures" updated, restart the PC and then re-run the update. It worked! It had not occurred to me to try what I've assumed that 'impossible' meant that they had not installed at all, not that they didn't had simply not installed correctly and must have become corrupt.

  I hope this will help someone else who has the same problem, I've had!

  Best wishes

  Etherlass

• Muse update installation fails with the error: DW071 & DW0003

  Here is the Setup log error:

  Exit code: 7 please see specific errors below for troubleshooting. For example, ERROR: DW003, DW071... - Summary - 0 fatal Error (s), 3 (s) - payload: dotNet 4.5 4.5.0.0 {B89609E0-1A98-11E5-9217-A35DB58AA028}---ERREUR: DW071: ERROR: DW003: payload of third party installer NDP452-KB2901907-x86-x64-AllOS-ENU.exe failed with exit code: ERROR-2145124329: cannot install .net framework.

  I have already completed the installation of repair on all C++ applications and installed the dot net 4.6 update and restarted the computer. 

  Hi ,

  Please, try the following steps:

  • Uninstall Adobe CC of the machine (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Set to "Full control" permissions on the files of Adobe for all users in the following locations:
    • [System drive]: \Users\ [user name] \AppData\Local\
    • [System drive]: \Program Files (x 86) \Common Files\
  • Restart the computer.
  • Install the application Adobe CC (Creative Cloud help |) Creative cloud for office)

  Kind regards

  Nicos

• Windows10 installation fails with the error code 80200053. Update Windows product unresolved error, code 80070057

  I'm running Windows7 and have attempted to download/install Windows 10.  The Windows 10 download/install fails with error code 80200053.  Troubleshooting Windows Update product unresolved error code 80070057.  How should I proceed?

  OT:

  Installation of Windows 10

  I think that this error has something to do with the Windows updates blocking antivirus.

  Try this:

  (1) disable the anti-virus and all others no essential programs

  (2) type in services.msc RUN which will take you to the 'services' and search for Windows Installer mine has been set to manual so leave it put there and just start it

  (3) now, run windows update and wait for your window installed correctly

  (4) restart the computer

  Let me know how it goes!

• KB980182 installation fails with the error Code 80070057

  OS: Windows 7 Home Premium x 64

  After several attempts, I can't KB980182 to install through Windows Update or by downloading and running manually the. MSU. I am presented with the code 80070057 error whenever I try.

  I also tried to restart my computer several times to get this to install without a bit of luck.

  Is there a way to fix this without having to reinstall Windows as I saw suggested elsewhere?

  Try this:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your key of handy product, uninstall NIS 2009, LiveUpdate and all Norton Add ons via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2010 using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8 see if KB980182 now installs. If no joy, open a free support ASAP incident!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update NVIDIA VIBS fails with the error "device or resource busy".

  Hi, we have encountered an error where we are unable to obtain the density, we should be able to on our cards Nvidia K1. Specifically, with allocation of 512 MB RAM video for desktop computers, we approach, to no, 64 VM by GPU, we should be able to. I have a box to open with VMware and they suggested that I should update my drivers Nvidia on ESXi host. 304, 76 - running 1OEM.510.0.0.802205 and I found the version 319.65 - 1OEM.510.0.0.802205 on the Nvidia site. If I try to run software esxcli vib install v - NVIDIA - VMware_ESXi_5.1_Host_Driver_319.65 - 1OEM.510.0.0.802205.vib then I get the error:

  [InstallationError]

  Error running /tardisks/NVIDIA_V.v00 rm:

  Return code: 1

  Output: rm: cannot remove ' / tardisks/NVIDIA_V.v00 ': device or resource busy

  If I try to run:

  esxcli software vib remove - vibname = NVIDIA - VMware_ESXi_5.1_Host_Driver

  Then, I get the same error.

  All the VMS are arrested and my host is in maintenance mode. How to uninstall we 304.76 pilot so I can install driver 319.65? Is there a service that I have to stop first or something?

  Here is the complete procedure:

  To update the VIB of NVIDIA GPU, you must uninstall the currently installed VIB and install new VIB, as described above. To uninstall the currently installed VIB:

  1. Stop all VMs using 3D acceleration.
  2. Place the ESXi host in maintenance mode.
  3. Open a prompt on the ESXi host.
  4. Turn off Xserver by running the command:

     /etc/init.d/xorg stop

  5. Remove the NVIDIA VMkernel driver by running the command:

     vmkload_mod -u nvidia

  6. Remove the VIB by running the command:

     esxcli software vib remove -n NVIDIA-VMware

     You can now install a newer NVIDIA GPU VIB.

• OfficeJet 8600 installation fails with the error 25024

  Had to replace a 8600 printer. Added the new device, but analysis wouldn't work on the second computer, nor the HP application would launch. Tried to reinstall the driver but it fails stating that he cannot remove the old device. In the case of the Viewer, it displays an error 25024. I tried to install from the CD & download. He has worked on the other computer, but this one may not remove or install correctly. I tried to run the scrubber v14 but who does not find a device and said has some files to remove, restart, attempt to install and always fails. The scrubber removes all entries in reg etc. and which is the right to use one?

  Win7 64 bit

  OfficeJet Pro 8600 - attached to the network (wired).

  To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  find and install SOFTWARE to FEATURE FULL if it is available:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4323659

  Install and let me know the result!

  Have a great day!

  -Spencer

• Vista Service Pack installation fails with the error.

  I checked Windows update and every time he tried to install SP1, system failed, done everything suggested to & assistance and not yet able to download SP1 and SP2 cannot download until I have the first...

  Original title: I want to install Vista Service Pack 2 but informed me that I don't have a VSP 1, when I try to download SP1 it tells me that I have an error, please can someone advise... Thank you

  Try to download the SP directly on your computer first, then run. My apologies if that's what you hear in #3

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  I hope this helps. (Note: you can do the same thing with SP2)