Microsoft scan found and partially removed Trogen:WinNT / Aluren.S

Similar Questions

• I have microsoft scan software and a jet hp6500 office printer, scanner etc. How can I scan to a PDF file?

  I have microsoft scan software and a jet hp6500 office printer, scanner etc.  How can I scan to a PDF file?

  Hello Jim,

  I will suggest 2 things. First, go to hp.com site and select your device from the five listed here (http://www8.hp.com/us/en/support-drivers.html).

  Second suggestion is that you use the HP software to scan your document, where the native format is PDF.

  Let me know if this helps you.

  Kind regards

  BearPup

• Microsoft safety scanner only partially remove Sirefef.AH Virus. What would be the next steps to completely remove this virus?

  I scanned with MSE, Microsoft Security Scanner, Spybot S & D and nothing's going to get rid of this virus. At this point, Microsoft Security Scanner is the only one to recognize the presence of the virus. The rest say that the computer is clean. Help me please!

  Thank you

  Mike

  Several options can be found here: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/keep-getting-virus-trojen-win32-sirefefah/3b0081c8-5342-4683-b434-e1a42f3cda10

  Suggest revisiting you and make your choice.  And if you don't mind, let us know what works for you... it will help the people who have read this thread.

  Note of the suggestion of tricky300 about Superantispyware.  You could try Superantispyware Portable to include put it on a flash drive and it works from the flash drive to scan your computer.

  Kind regards...

• Please help, the TrojanSpy: Win32 / Delf was only PARTIALLY removed by the Microsoft Safety Scanner

  October 6, 2012

  Hi all!

  I ran the Scanner Microsoft (MSS) mode Quick Scan and it found nothing.

  I then ran MSS in full Scan mode and it found: TrojanSpy: Win32 / Delf

  In the results of Scan of MSS window, he says:

  "The analysis is completed with success and viruses, spyware and other potentially unwanted software were detected and partially removed".

  Given that the results showed the presence of "TrojanSpy: Win32 / Delf" I have four questions, please:

  (1) how do I get this Trojan horse on my computer? I am very sure and use a good anti-virus/malware software.

  (2) given that the results showed only partially removed SMS "TrojanSpy: Win32 / Delf", that the parts are on my computer?

  (3) how dangerous is the part or parts that remain on my computer that SSM has not deleted?

  (4) how to remove somewhere has been left more that SSM has not deleted?

  Thank you in advance for any help that anyone can give me.

  Sincerely,

  Traveler4God

  Hello

  Yes, it will remove the infection.

• Trojan:Win32 / Alureon.da - partially removed!

  I've used software removal tool microsoft windows malware, and it detected and partially removed the malware.

  This is part of the report that I had:
  Trojan:Win32 / Alureon.da partially removed, manual steps required
  Rogue: Win32 / FakeCog removed
  Rogue: Win32 / FakeRean deleted
  Trojan:Win32 / Rimecud.A removed
  Trojan:Win32 / TIBS.it removed
  for Trojan:Win32 / Alureon.DA, it says it is only partially removed, so what steps should I take to remove completely?
  I use windows Vista.
  the Trojan:Win32 encyclopedia entry / Alureon.DA says I need to restore the DNS settings, but I can't find the steps to do this for vista. You can find me the page that lists the following steps for vista.
  Thanks in advance.

  Clear your Temp File/Cache first upward.

  http://winhelp2002.MVPs.org/delcache.htm>

  Claire on your temporary files

  Click Start > all programs > Accessories > System Tools > Disk Cleanup

  Better and easier to use -CCleaner.

  Download the basic build (Slim) via

  http://www.CCleaner.com/download/builds.aspx>

  The basic build (Slim) does not contain the toolbar disgusted

  DO NOT USE ANY cleaning advanced options. DO NOT TOUCH THE REGISTRY. At least not for now.

  Reset

  Utility anti-rootkit TDSSKiller detects and removes the following malware:

  malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon, TDSS, Zeus, TDLV4, etc.); bootkits; Rootkits.

  Try TDSS Killer: http://support.kaspersky.com/faq/?qid=208283363> TDSS Killer is probably a "weapon of choice" against Alureon and many users report success using this program. http://support.Kaspersky.com/viruses/solutions?QID=208280684>

  It is also possible to scan your computer with MalwareBytes' to remove all traces that may still be present.

  MalwareBytes Anti-Malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  In addition, scan with the free Version of (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html >

  FYI

  How can you detect if your computer has been violated and infected with DNS changer?

  http://www.dcwg.org/>

  http://www.dcwg.http :// www.dcwg.org/http :// www.dcwg.org/org/detect/>

  UTC/GMT is 04:21 Friday, may 4, 2012

• At ran Windows full scan and found Trojan:Win32 / Alureon.DX, but only partially removed

  Had problems with the netbook from Toshiba and ran Microsoft Security Scanner. The scanner finds six threats, removed, Trojan:Win32 / Alureon.DX all but one, who has been partially removed, but requires manual steps, said.

  How can I manually remove this Trojan horse on my computer?

  Hello

  Try this

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Microsoft safety scanner shows Trojan:WinNT / Alureon.S only partially removed

  Having the virus that made the laptop unusable. Microsoft safety scanner ran and he removed three other viruses but it's only partially removed but doesn't tell me how to get rid of completely. Under XP. Apreciate any help.

  Having the virus that made the laptop unusable. Microsoft safety scanner ran and he removed three other viruses but it's only partially removed but doesn't tell me how to get rid of completely. Under XP. Apreciate any help.

  Honestly, this is not the appropriate forum to deal with malware as serious as Alureon and its variants. I would recommend that you post your question in the support section of the malware from the forum on the link below. Alueron is a rootkit malware and should be treated using the interactive help trained. The forum is completely free, although you must register to post. This requirement prevents "spamming" and drive - by display.

  Repair-Bots online

• Partially removed Microsoft Java CVE-2013-2423 security scanner

  Hello

  I ran the Security Scanner version 1.0.3001.0 Microsoft and he has detected the malicious program JAVA/CVE-2013-2423 and indicated that it was partially removed.

  I deleted all my Win 7 Pro x 64 system Java programs and represented the program with the same results, only partial removal.

  I deleted all restore and backup points and the scan is represented with the same results.

  The scanner said three files were infected. But that doesn't tell you which files they are.

  There is no way to determine what should be deleted from the system. When you click on "View detailed results of the analysis" what you get is a pop-up with two columns: Malware and analysis of the results. Only in the column of malware: exploit: Java/CVE-2013-2423. The results of the analysis indicates: partially removed.

  The popup box also indicates: to view the manual steps, click the name of the virus, spyware or potentially unwanted software. When I click on the name of the virus, I get a Web page on the virus and it says it takes to remove programs, I did after the first scan, but the Scanner still shows its presence.

  I think Microsoft should modify this program to give the full path to the infected files.

  This is the first time I ran the Microsoft Safety Scanner. My internet security software is ESET Smart Security 7. I also run Windows Defender and SUPERAntiSpyware Pro, but none of these programs has detected this threat.

  Is there a solution to this problem?

  Thanks in advance for your help.

  Concerning

  This problem has been resolved. Although I just updated to ESET Smart Security 6 at 7, I didn't run a scan complete with ESET SS 7 still. ESET SS 7 found and removed the threat.

  Concerning

• Microsoft safety scanner saying TrojanClicker:Win31 / Yabector.A is partially removed

  Said Microsoft security scanner that trojanclicker:Win32 / Yabector.a partially removed.  How to completely remove the thing.  Must be simple enough for me to be able to manage it.  Help!

  Hello

  You do not specify your version of Windows. This troubleshooting should work with Windows 7
  Vista or XP.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of the malware: Vista is similar to Windows 7, XP use RUN rather
  Start - Search and there is no RUN AS ADMIN option.

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• HackToolWin32/KeyDump partially removed by security scanning

  Scan only partially removed MS HackTool32/KeyDump of my computer security. Can someone help me remove this?

  Hello

  I wish you put your computer in safe mode and run the scan using the Microsoft Safety Scanner to remove the potentially dangerous HackTool32/KeyDump.

  Note: After you remove the malicious software, restart your computer as usual.

• I ran the last microsoft safety scanner and it showes partially deleted toby.s.

  I scanned with safety last scanner updated all my virus software.  Microsoft security scanner is the only scan that shows toby.s and it is partially removed and will not remove completely is there a way to remove the virus completely.

  Hello

  Please follow the steps from the link and check that it works very well.

  What is Windows Defender in offline mode?

  http://Windows.Microsoft.com/en-in/Windows/what-is-Windows-Defender-offline

• How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  I recently had to format my hard drive and reinstall iTunes 12.3.2.35 on my Win7 PC. As part of the re - install iTunes, I clicked on the button scan for music.  This has created duplicates several of my songs.  I deleted then the duplicate songs from iTunes, but when I went to play a few songs a pop-up said "the song would not be because the original could not be found.  You want to locate? "When I tried to locate the song it is not found, but when I pulled the songs out of the trash they could be found.

  How can I keep the original and remove any duplicate songs in iTunes on PC Win7 which took place after iTunes to scan for music during a re - install?

  iTunes can create duplicates if the same content is added several times from outside the media folder when it is about to make copies of everything that is added to the library, or is added from an external drive that hosts the press kit that was disconnected during the launch of iTunes.

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use MAJ > display > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  TT2

• [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  Hi team,

  I am trying to connect to the Oracle 9i database using VB code below:

  strConnection = "Driver = {Microsoft ODBC for Oracle};" Server = SERVERNAME; UID = username; Pwd = PASSWORD"
  Connect = New ADODB. Connection
  Connect.Open (strConnection)

  The last line throws me below error:

  [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  The VB code works well and able to connect to database server dev dev. The same script with the name of the UAT server does not work on server UAT.

  The servers are Windows server 2007-32 bit.

  When I checked the tab drivers in ODBC Data Source Administrator, dev server entry below:

  Microsoft ODBC for Oracle - 6.00.6001.18000 - Microsoft Corporation - MSORCL32.dll - Date

  Considering that the UAT server has entered below:

  Microsoft ODBC for Oracle-

  The Microsoft ODBC driver for oracle is listed in the tab UAT Server drivers, but did not have details of file version & dll. This driver is not installed correctly? If so, how the re install? Please help solve this problem as soon as POSSIBLE.

  Kind regards

  Tamil

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Found the names not allowed on my contacts Hotmail list and cannot remove them (they do NOT appear when I look at 'Contacts')

  Found not authorized names on my Hotmail Contact list and cannot remove them (they do NOT appear when I look at 'Contacts'), but are present if I send a new email by clicking on the button 'A' and selecting 'all '. Any suggestions on how to remove the unauthorized names?

  Submit all Hotmail queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• Windows Vista and Microsoft Scan 8.0 trend are compatible with each other?

  Hello

  I get an error after installing trend Microsoft Scan 8.0. Status is coming as offline in the Task Manager. When I check the Windows Security Center, I see that there is a message that says:

  "trend microsoft officescan is on and but notes its status as Windows Security Center in a format that is no longer supported.

  An idea on what can do to eliminate this?

  You get this message because Officescan 8.0 (which is quite old. 10.5 is the current version) uses an obsolete method to communicate with the Security Center. OfficeScan should continue to work, so you can always get the updates of definition.

  http://windowsteamblog.com/Windows/b/WindowsSecurity/archive/2009/05/06/upcoming-Action-Center-changes-for-security-vendor-software.aspx