Microsoft Update will not work

Similar Questions

• I just bought a used with xp on it computer, after that getting hook up to the net microsoft update will not work.

  He said that what ep is running on another computer or block by microsoft. How can I resovled this.thanks andrew

  Hi ford30705,

  1. What is the full error message that you receive?

  2 are you able to access all other websites properly on the computer?

  Windows Update will not work if the copy of Windows XP is not enabled on the computer.

  Type the command at the command prompt to find out the status of activation on computers below.

  oobe/msoobe /a

• I have a Dell Dimension 4500 Windows XP Pro SP 2. I have a new installation disk. Windows Update will not work and Microsoft Update will not work either. What Miss me?

  Pentium 4 CPU

  1 GB of RAM.

  Win XP Pro - SP 2

  Dell Dimension 4500

  If it will not download from this link on your PC, try another and just use a USB key to copy on you and then run it. Once installed SP 3, and then the fun begins because there are about 100 + updates after her.

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• Microsoft Update will not install error 0 x 643 net Framework 1.1 service pack 1

  error 0 x 643 microsoft net franwork 1.1 service pack 1 is not installed

  See: When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0, or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install '1603'

  If always, the update will not be installed after passing by all the methods shown, contact MS as described at the beginning of the article:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Install a microsoft update WILL NOT

  For two weeks I was faced with an update from microsoft that will not be installed. That's my faithful old XP.

  The small yellow shield indicating that an update, KB2656353 to be more precise could not be installed...

  only this one, I get used to the shield warning... !! The answer came to me through

  PC'ers useful, but it says that I have to find, uninstall and then reinstall the three services packs and then, and

  only then this update will have. I don't know is what a service pack or where to find a. I do enough

  good on computer maybe I severe dyslexia and her take my 45 minuets just for this deal.

  I guess I'll have to find a service online, I hope, or a professional come to my house to fix my old

  young girl... ! I'm home bound as well and my computer is a salvation for me in many ways. I can't wait that my

  particular problem is rocket science so difficult to repair. I was hoping a link or something can handle.

  Lady... !!

  Duplicate of http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-update-for-microsoftnet-framwork11sp1/c052b893-3ed2-4f63-a5f8-60b5efac5da2 (March 3, 2012)

  And http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/a-windows-update-wont-install/a4ced591-c173-451f-bff7-452cd033ed21 (March 2, 2012)

• The tablet of Microsoft Surface will not work with my printer HP Photosmart 5510 current wireless?

  I need to get a new laptop as my only current becomes slow and unresponsive, so I thought I'd do a Microsoft Surface tablet when they become available. I only bought my printer a couple of months, and it would really be a guy, if it was not compatible with the Surface.

  Also, I downloaded the Windows 8 Preview of consumers, and in trying to connect my printer, it wouldn't install because it did not support the operating system, telling me to make sure I was using XP or Win 7. After a few weeks, I returned to windows 7. Does this mean that my printer will not work with any version of Windows 8, either on a tablet or PC?
  I thank in advance.

  HP alone are responsible for the support of pilot and he will be at their discretion. If it is a very recent model, HP will probably out drivers more or less at the same time as Windows 8 in fact for the shelves of stores...

• Updates will not work on Vista

  I am running Vista Home Premium and I can't run updates. Anytime I they download and install. After the reboot, they go through the Configuration 1, 2 and 3. At the end of 3 it is said complete and the system stops and restarts and goes back through the new installation. Shut up just. I left for hours and keeps it just loops. Any ideas?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your falls into the above category: download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  More information shows what the process that it loads.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• XP updates will not work, get 0x8024400A and 0 x 80240036 error codes

  Just restored sony vaio xp sp2 (32-bit system). No update will run. Error code 0x8024400A.When run windows update, asks me if I want to go to the upgrade of microsoft, but get the error number: 0 x 80240036. Also cannot run fixit...

  Hello

  Have you made changes on the computer before this problem?

  Not a valid win32 application"error when running an executable file suggests that the file is corrupted. It may have been partially downloaded for which the error is coming.
  I suggest to download the Service Pack 3 Setup program by using a different browser than the one you are using or in another computer that has the problem and try to install again by using the recently downloaded file.
  Please post back with the results so that we can help you further.

• Windows update will not work or let me start the update program, get the Windows Update error cannot currently get "some updates because this service does not work"

  I moved and my computer is stuck off like 2 and a half months. Well, now I'm back on it, but for some reason any my Windows Update does not start. Whenever I go to him, he tells me that the program is not running and you may have to restart. I do and he said to me again and the same thing. So I went in my services to ensure that all programs, that depends on run works and he says even its operation. How can I fix it?

  Hello Nick,

  Here is a link where you can reset windows update components.

  http://go.Microsoft.com/?linkid=9665683

  Download the fix - it and run the fix - it.

  Please select the mode option run aggressive.

  Disable your anti-virus software.

  Restart the computer and verify if you are able to install the updates.

  Kind regards

  Sumanth.B.S

• Windows Update will not work.

  I have Windows sp3 Windows update worked fine until about 3 days ago now, I just get an error code "exit code = 0 x 80248015.

  I removed the activeX control and reset Ie8, when the problem happened first the two latest updates autoupdate offer also for Ie8

  but downloads nothing remains at 0%. I tried the fixit it says nothing is wrong and I don't seem to be getting the activeX control.

  2014-11-26 09:33:18:343 4008 454 Misc = logging initialized (build: 7.6.7600.256, tz:-0600) =.
  2014-11-26 09:33:18:343 4008 454 Misc = process: C:\Program may Explorer\IEXPLORE. EXE
  2014-11-26 09:33:18:343 4008 454 Misc = Module: C:\WINDOWS\system32\wuapi.dll
  2014 4008 454 COMAPI - COMAPI-11-26 09:33:18:343: IUpdateServiceManager::AddService.
  2014-11-26 09:33:18:343 4008 454 COMAPI - ServiceId = {7971f918-a847-4430-9279-4a52d1efe18d}
  2014-11-26 4008 454 COMAPI - AuthorizationCabPath 09:33:18:343 = C:\WINDOWS\SoftwareDistribution\AuthCabs\muauth.cab
  2014-11-26 09:33:18:375 884 87 c Misc validation signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\Downloaded\7971f918-a847-4430-9279-4a52d1efe18d.auth.cab.temp\muauth.cab:
  2014-11-26 09:33:18:406 884 87 c Misc Microsoft signed: Yes
  2014-11-26 09:33:18:406 884 87 c Agent WARNING: WU client omits CClientCallRecorder::AddService2 with error 0 x 80248015
  2014-11-26 4008 454 COMAPI WARNING 09:33:18:406: ISusInternal::AddService failed, hr = 80248015
  2014-11-26 09:33:18:406 4008 454 COMAPI - exit code = 0 x 80248015

  Thank you

  Thank you I you in control.

  Among the updates done download final and install.

  Hello

  The "answer" post

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/is-Microsoft-update-down/3ac3fdf8-8862-41E9-9598-961c59afd0d9

  reports that the problem has been resolved.

  The FixIt or manual in methods

  How to reset Windows Update components

  http://support.Microsoft.com/kb/971058 can also solve the problem.

  (Based on this article)

  http://www.Computerworld.com/article/2850890/Windows-Update-is-broken-on-XP.html

  Don

• Œuvres of Windows Update, Microsoft Update does not work (error number: 0x8024402F)

  OS: XP Professional w / SP3

  Browser: IE 8.0

  Windows Update worked fine.  I installed Microsoft Update, but when I run it, I get "error number: 0x8024402F»  If I go to settings and check "disable Microsoft Update software and let me use Windows Update only", it works again.  However, if I uncheck the box or re-install Microsoft Update, I get the error again.  I tried the Fixit MS software, and I restarted it, but no one helped.

  0X8024402F WU_E_PT_ECP_SUCCEEDED_WITH_ERRORS cab file external treatment is completed with errors.
  It is a Windows Update error, which indicates some sort of connectivity problem.
  See - you may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
         http://support.Microsoft.com/kb/836941>
  UTC/GMT is 18:23 on Friday, June 29, 2012

• Windows XP Home 2002 SP3, no administrative tools, Microsoft Updates will not update automatically

  has recently had some problems with my computer, I think that some how I deleted my administrative tools shortcuts. When I try to get Microsoft Updates, I get an error telling me to turn on the persistence of the user, when I go in my internet options it is already activated. When I click on my administrative tools, I have NO shortcuts for what it is. In my opinion, there should be 5 or 6 programs in this section. I tried to restore my computer with no luck. My restore no longer works.

  To avoid confusion and duplication of effort, please post all further follow-up replies to your new thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/permission-administrator-windows-update/6bc104a8-1732-4ed4-8098-ae49016926d0 (March 11, 2012 & ff)

• Windows update fails to initialize wuauclt.exe and window update will not work.

  Windows update fails to initialize wuauclt.exe. Update history shows update Cumulative security for Internet Explorer 9 for Windows Vista (KB2699988) has failed. Command window appears every 20 seconds in train to run wuauclt.exe and closes instantly.

  I tried to restore to a restore point prior (Windows Vista Home Premium 32 bit Service Pack 2). I also run AVG Anti-virus (no virus not detected) and Microsoft Fix it Microsoft difficulty he says he finds and correction of errors in windows update, but the problem persists.

  Any help is appreciated.

  Hi Patrick_Sims,

  1. you receive an error with the message code?

  2. what Fixit did you run?

  Method 1:

  You can reset Windows Update components and check if it helps:

  How to reset the Windows Update components?

  For more information, you can also refer to the following article:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  Method 2:

  You can try to install the stand-alone package to update based on the version of Windows Vista installed and check if it helps:

  For Vista 32 bit.

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2699988)

  For Vista 64 bit.

  A security update cumulative for Internet Explorer 9 Windows Vista x 64 Edition (KB2699988)

  For more information, see the article:

  My PC running the 32-bit version or 64-bit Windows?

• Windows Update will not work. Help!

  Is KB2962872, KB2971850, KB2973201, KB2961072, KB2972280, or KB2974008 listed in installed updates (not updated story)?

  What version of definitions appears in the Windows Defender Update tab?

  

  Update Windows 8.1 [KB2919355?]... .temporarily fixed the problem I had until my app Store Windows began to have problems, as well as my graphics card. I tried to fix this new problem since...

  What "new problem" you have now and how it is related to the Windows Update feature?

  1. Yes. All updates are installed.

  2.

  3. I have a update optional KB2967917 that will not be installed.