Microsoft Visual Studio installed as an evaluation copy - but I wanted an express edition

Hello

I'm currently learning about SSIS and Reporting SERVICES by using visual studio.  I think installing a trial version of visual studio, 2012, instead of a specific edition because I can't afford just a license.

Is there a way to turn this into an express edition, so I did not have to uninstall the version of visual studio comes to reinstall?

Thank you very much

This issue is beyond the scope of this site and must be placed on Technet or MSDN

http://social.technet.Microsoft.com/forums/en-us/home

http://social.msdn.Microsoft.com/forums/en-us/home

Tags: Windows

Similar Questions

  • Microsoft Visual Studio 2010 Service Pack 1 could not install 0x13EC

    Microsoft Visual Studio 2010 Service Pack 1 cannot be installed several times giving the 0x13EC error message.

    Microsoft offers support without charge for updates of security (only!).

    As such, you will find the support for VS 2010 SP1 installed in this forum: http://social.msdn.microsoft.com/Forums/en/vssetup/threads

    Tip: assuming that Visual Studio 2010 Service Pack 1 Beta is not installed, you can try installing the SP1 manually-online http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=23691

  • Errors when trying to install KB2251481 - update of security for Microsoft Visual Studio 2005 Service Pack 1 XML Editor

    I try to install the KB2251481update:

    Update of security for Microsoft Visual Studio 2005 Service Pack 1 XML Editor

    When I run it on my computer in the Panel of control/updates section to update, it fails. I get an error from the A66 without details.

    Here's a screenshot of the error of the A66.

    I am running Vista Home Premium.

    It has been suggested for this A66 error to go to the section control/uninstall Panel, click on the "MS .net Framework 4 Client Profile" and fix it. I did it successfully. I tried to run the update again; and he failed again with the error of the A66.

    I read a post on another forum of MS who suggested downloading the patch here:

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26383

    I downloaded and tried to run. I read the description. He said it was for VS 2005 for Vista.
    He failed. I got another error:

    "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch. »

    Here is a screenshot on my account Flickr of this error.

    Can anyone help with these errors so that I can install the update for Visual Studio 2005?
    Am I missing something?
    I can provide more information?

    Marz

    Solution for the problem of installation KB2251481 here:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/KB2251481-security-update-for-Microsoft-Visual/be3135e1-b1ed-4430-BE22-1aaf8485c249

  • No option available after installing the plug-in for Microsoft Visual Studio 1.2

    Hello!
    I am a developer of a new blackberry, and I'm doing my first sample.
    I have experience with Microsoft.Net (Asp.Net and Vb.Net) but I've never done anything to a smartfone.

    So, I followed these steps:
    -J' read the documentation.
    -J' downloaded the "plug-in for Microsoft Visual Studio 1.2";
    -J' downloaded 'Simulator 5.0. "
    -J' installed the "plug-in for Microsoft Visual Studio 1.2";
    -J' installed the Simulator "5.0".

    Everything worked fine (I received no error message).

    After that, I tried to initialize a "Hello World" application in Visual Studio 2008, but I can't find any blackberry resources. There is no options in any menu of Visual Studio, there is no new project type, there is no option on the menu "Add-in manager.

    I found a video saying where to find the browser "BlackBerry" in menu "browser with...» "my project (when I click with the right button mouse), but this option is not there. I have not all references to the library or just about any BlackBerry resources on my VS2008.

    Can someone help me?

    I am grateful for your attention.

    Best regards

    João Paulo.

    [email protected]

    Check out the following thread... It should give you the manual steps on how to get the BlackBerry browser in the dialog "Browse with.."

    http://supportforums.BlackBerry.com/T5/Web-development/I-don't-see-BlacberryBrowser-in-quot-Browse-wi...

  • Microsoft Visual Studio Express 2012 is not install my windows 8

    Microsoft Visual Studio Express 2012 is not install my windows 8. If I click on the .exe file, it will show me this message.

    Hello

    Your question is beyond the scope of this community.

    Please post your question to the MSDN Visual Studio Forums.

    https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

    See you soon.

  • 2012 Microsoft Visual Studios

    Recently, I downloaded visual studios 2012 off the coast of http://www.microsoft.com/en-gb/download/details.aspx?id=30682 , do I have to register the product after 30 days for free if so, how.

    Alex Machin

    You can evaluate the professional, Premium and Ultimate editions of Visual Studio for 30 days, from when you install the product. Signature in Visual Studio adds 60-day evaluation period, for a total of 90 days. If you do not save a Visual Studio trial edition in 30 days, the trial period expires 30 days after installation.

    For example, if you download and use Visual Studio Premium for 10 days and then save it, you can use it for an additional period of 80 days. To continue using the product after 90 days, you must provide a valid product key. For more information about how to locate or obtain a product key, see how: locate the product key Visual Studio and How to buy Visual Studio.

    References Visual Studio 2013, but the same principles apply to the 2012 VS. To learn more:

    http://msdn.Microsoft.com/en-us/library/gg442061.aspx

  • Microsoft Report Viewer 2010 for Microsoft Visual Studio 2010

    Hello

    I have to use Microsoft Report Viewer 2010 with Microsoft Visual Studio 2010. I recently downloaded and installed the 2010 report of the spectator, but fail to understand how to use it.

    I have a few questions:

    (1) how to use the MS Visual Studio 2010 Report Viewer?

    (2) is it possible to include the Microsoft Report Viewer in the Toolbox?

    (3) is shipped with Visual Studio, identical to MS Report Viewer in Report Viewer?

    Here is my configuration:

    Development environment: Microsoft Visual Studio 2010 Professional SP1 with .NET Framework 4 SP1.

    OS: Windows Vista SP2

    Hi Gupta,

    The question you posted would be better suited in the MSDN forums.
    http://social.msdn.Microsoft.com/forums/en-us/vsreportcontrols/threads

    I hope this helps!

  • A security update for Microsoft Visual Studio 2008 Service Pack 1 XML Editor (KB2251487)

    Friends, y ' All must help me with that.

    I don't know all you Vista users know aware of the KB2251487 of security update.

    Told me all the time that I need to install this particular update. I click on install and after 72hrs, 365 days or something else, the installation is still stuck at 0%.

    1. It's bugging me to no end. I searched in the Microsoft forums for help on this topic and I tried all them; None of them work.
    2. I called Microsoft support even, but I was told that I will be charged $ 99.00

    I mean... come on!

    Could someone out there please help me out on this... for free?
    Please, I beg you!

    Thank you, I would really appreciate it!

    Hello

    1. you receive an error message/code when you try to install the update?
    2. what troubleshooting steps did you do to fix this?

    I suggest you follow the mentioned below of the methods.

    Method 1: perform the clean boot to see if you can install the update.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: after you perform a clean boot, perform step 7: reset the computer to start as usual from the article above.
    If the problem persists, follow the methods.

    Method 2: reset the windows update components.
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    How to back up and restore the registry in Windows
    http://support.Microsoft.com/kb/322756/

    Method 3: download the update below and install it manually.

    First install Visual Studio 2008 Shell (integrated mode) with Service Pack 1 Redistributable Package from the link:

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16480

    Then install Microsoft Visual Studio 2008 Service Pack 1 XML Editor Security Update from the link below:
    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26419#system-requirements

    Reference: Impossible to install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    http://support.Microsoft.com/kb/2509997

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756/

    Warning of Chkdsk.

    Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    See also the link: http://social.msdn.Microsoft.com/forums/en/vssetup/thread/c87d70ab-b536-4cf8-a7eb-f78764bf8b3f

    Hope this helps!

  • Windows Update has detected an error code 80200053 for the installation of the updates for the update of security for Microsoft Visual studio 2008 and 2010.

    Hello

    I received an update for security update for Microsoft Visual Studio 2010 (KB2542054) and the security update for Microsoft visual studio 2008 Service Pack 1 (KB 2538241). This updates have been detected by windows update on my laptop. However, when I tried to install these updates, they detect an error code 80200053, windows update encountered an unknown error. I need help with this ASAP. Thank you.

    Hello

    Step 1:

    You can read the following article and try to reset the Windows Update components and check.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Step 2:

    You can also check the links below and try to download and install the stand-alone package with updates:

    Microsoft Visual Studio 2010 RTM MFC security update

    Microsoft Visual Studio 2008 Service Pack 1 MFC security update

    Hope this information is useful.

  • Microsoft Visual Studio 2015 - installation problem

    Setup in Microsoft Visual Studio 2015 error

    I downloaded "vs2015.com_enu.iso". The installation gets stuck in the place where it says, install Microsoft .NET 4.6.

    A few important points:

    • I am also unable to install .NET 4.0, 4.5 .NET.
    • Windows Update indicates the update, download too and said the update will install on the next reboot, and after the next reboot always two updates on the WUA list and are not installed.
    • So the problem I tried to reinstall the Windows OS, but nothing helped.
    This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)

    If you give us a link to the new thread we can point to some resources it
  • Another version of microsoft visual studio 2008 has been detected in this system must be updated for sp1. What to do next?

    The complete error message that I receive is less when I try and install SQL Management Studio on a PC running Windows 7 64 bit running SQL Server 2008 R2. The only point is that Visual Studio is not installed then, how can I update something that is not installed in the first place. At the end of the day, I'm trying to install SQL Management Studio so that I can recover my backup of clients.

    Another version of microsoft visual studio 2008 has been detected in this system must be updated for sp1. Please update all installations of visual studio 2008 sp1 by visiting Microsoft update

    My mistake

    Programs installed

    Hello

    Please read the following support article:

    https://support.Microsoft.com/en-us/KB/956139

    Maybe you have the Visual Studio Tools for Applications 2.0 installed.

    In addition, you can get a quick response with SQL Server related questions in the following forum:

    https://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

    I hope this helps.

    Kind regards

    Alberto Morillo
    SQLCoffee.com

  • Impossible to reinstall Microsoft Visual Studio 2015

    • Earlier, I installed microsoft visual studio 2015 in drive H and it worked very well.
    • Later I mergerd H drive with other readers to a place in the Visual studio installation directory and drive C has been moved to a folder in drive E.
    • Visual studio was not at all and add remove program can not repair or uninstall.
    • Then I took it off by revo uninstaller and the remaining files and registry entries.
    • I also uninstalled 4 to 5 other programs that are installed with visual studio, something like the pack of language, etc.
    • When I tried to reinstall, the installation was already selected and gray outside so it cannot be changed, nor custom nor typical option.
    • The installation location selected was H:\visio
    • I searched on the internet and then I changed the drive letter from E to H, so the installation started, but it find you the following error.

    https://www.dropbox.com/s/knkymnzo24rd6to/Visual.jpg?DL=0

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • WHAT ARE THESE FILES IN MICROSOFT VISUAL STUDIO FOR & DO I NEED?

    I DON'T KNOW WHERE TO POST THIS QUESTION. I'VE LOOKED EVERYWHERE TO TRY TO FIND AN ANSWER - I LOOKED IN THE VISUAL STUDIO FORUM & DIDN'T SEE MY QUESTION HERE. I JUST NEED TO KNOW IF I NEED THESE FILES & WHAT ARE THEY? I USE THEM KNOWINGLY TO ANYTHING. THE ONLY MICROSOFT OFFICE PROGRAM I USE REGULARLLY IS A NOTE.
    SUDDENLY I HAD A SHOW PLACE FOLDER ON MY DESKTOP ONCE OPENED TAKES ME TO A FILE TO INSTALL MICROSOFT VISUAL C ++ 2008 REDISTRIBUTABLE. I INSTALLED IT & IT PUT A LARGE NUMBER OF FILES IN MY 'COMPUTER' FOLDER - NON AT ALL CERTAIN FILE, JUST BELOW ALL OTHER FOLDERS. THERE ARE 9 FILES EULA WHICH TALK ABOUT THE BETA OF MICROSOFT VISUAL STUDIO 9. I DON'T EVEN KNOW WHAT IT IS, SO MY QUESTION IS WHAT IS IT & DO I NEED? TAKES A LOT OF SPACE. IVE ALSO GOT A FOLDER FOR MICROSOFT VISUAL STUDIO 8 FOLDER IN MY PROGRAM FILES TO COMPUTER FOLDER - HAVE I NEED THIS

    Sunday, August 8, 2010 21:56:30 + 0000, VANITY999 wrote:

    I DON'T KNOW WHERE TO POST THIS QUESTION. I'VE LOOKED EVERYWHERE TO TRY TO FIND AN ANSWER - I LOOKED IN THE VISUAL STUDIO FORUM & DIDN'T SEE MY QUESTION HERE. I JUST NEED TO KNOW IF I NEED THESE FILES & WHAT ARE THEY? I USE THEM KNOWINGLY TO ANYTHING. THE ONLY MICROSOFT OFFICE PROGRAM I USE REGULARLLY IS A NOTE.
    SUDDENLY I HAD A SHOW PLACE FOLDER ON MY DESKTOP ONCE OPENED TAKES ME TO A FILE TO INSTALL MICROSOFT VISUAL C ++ 2008 REDISTRIBUTABLE. I INSTALLED IT & IT PUT A LARGE NUMBER OF FILES IN MY 'COMPUTER' FOLDER - NON AT ALL CERTAIN FILE, JUST BELOW ALL OTHER FOLDERS. THERE ARE 9 FILES EULA WHICH TALK ABOUT THE BETA OF MICROSOFT VISUAL STUDIO 9. I DON'T EVEN KNOW WHAT IT IS, SO MY QUESTION IS WHAT IS IT & DO I NEED? TAKES A LOT OF SPACE. IVE ALSO GOT A FOLDER FOR MICROSOFT VISUAL STUDIO 8 FOLDER IN MY PROGRAM FILES TO COMPUTER FOLDER - HAVE I NEED THIS

    Ouch! Please do not yell at us. We can hear you if you type normally,
    in different cases.

    Programming software is Visual Studio. If you do not, you do not have
    need him.

    But to be on the safe side, before deleting, why not burn these
    files on a CD? That way if something later complains of not
    Here, you can put back them.

    Ken Blake

  • Create the web icon using BlackBerry plugin for Microsoft Visual Studio

    Hi all...

    I am very new to the blackberry application development...

    I want to create web icon on blackberry. I use BlackBerry plugin for Microsoft Visual Studio

    Please give any link sample code or reference on how to create a web icon using BlackBerry plugin for Microsoft Visual Studio.

    Please its urgent.

    Thanks in advance.

    There are two ways that you can do with a BlackBerry.

    (1) you can push an icon on the desktop of users using push of BES or the new WebSignals.  This method requires no code peripheral side, but it requires the code side Server integrated with the BlackBerry Enterprise Server (BES) or our WebSignals public service

    (2) you can create a small Java application that is installed on the device that launches the browser to a specific URL.  You will need to Java plug-in for Eclipse to get there.

  • Microsoft Visual Studio 2010 trial version has expired and the product key no longer works

    Hey I'm just tring to update the code of my Microsoft Visual Studio 2010 (not express) and I got the code BMJJC-MR3JJ-PH49G-9VB2Q-6FBQ3 and copy and pasted into the box but he stated that "this product key not allows to extend the use of this product" so I'mkind stuck in there, the version I use is the 90 day trial version could help me with this?

    After your problem to the forum Visual Studio listed below link, they may be able to help.

    http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

    J W Stuart: http://www.pagestart.com

Maybe you are looking for

  • Cannot delete iMovie projects

    Hello I can't delete projects iMovie on my Mac and it's really bugging me, because I could do with the extra space. I use iMovie 10.1.2 on macOS Sierra (I'm a beta tester). Thank you

  • This accessory can be supported

    I have a 6 IPhone on ios 9.2. Whenever I plug a charger into the charging port the phone displays "This accessory can be supported." Then he runs down to 0% and turns off. I will then be able to charge the phone to 3 percent. Then it lights up and di

  • With the help of cRIO-9073 with 9403 module and Ping sensor

    I try to have a Ping of Parallax))) to work with my cRIO ultrasonic sensor. I have connected it to an e/s digital 9403 module and uses the PulseGen, SW.vi example. I plugged in and configured the 0 for an output pin have significance attatched on the

  • crashing Windows media center at the start of video library

    Whenever I go to the video library in Windows Media Center, I receive a report appcrash. (I have 1200 videos added in a directory) Windows 7 SP1 32 bitThank you

  • BlackBerry smartphones am I at risk?

    I am hoping somehow BB has something of so much aleve my worries!  I clicked on a link in a text Message yesterday from an unknown number... I know, I know, stupid!  But it was sorta on the spur of the moment and had not yet realized what I'd done! M