Microsoft Windows XP Media Center: monitor goes to sleep

Similar Questions

• I got a microsoft windows XP Media Center Edition 2005, and I can't do windows media player 11 basis that I've not updated cumulative 2 where to find this update?

  because it says I need to download the Update Rollup 2 for media center edition units 2005 but I can't find it... can someone help me find...?

  Artistic salvation,

  Thanks for posting. The KB below should explain the update in detail. You should be able to get the update through Windows Update.

  http://support.Microsoft.com/default.aspx/KB/900325

  I hope this helps. If you have any questions please let us know.
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows XP media center keeps going in a loop and will not complete the boot.

  Rebooted PC, probably because of an update, but I also dropped the mouse wireless in the word, and I don't know if that's the problem.  To start Windows and I have three choices, but if I choose safe, last known config, or normal mode, it ends the countdown and starts, but loops to the same black screen that has the countdown.  Help!   Thank you very much.

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  the problem is known as "boot loop" and it is generally caused by a lack of disk and file system tune up

  There are commands that can be executed in the disk prompt that will help stabilize the boot process.

  However, you need to start with any xp cd and launch the recovery console to log on to the disk system.

  then the disc prompt, run the following commands >:

  Chkdsk

  Fixboot

  FIXMBR

  (the fixmbr will provide a serious warning, but you can ignore the scarecrow)

  then the output, remove cd and the system should be able to boot normally again.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Not able to install Windows XP media center 2005, het a message to install the Update Rollup 2.

  Original title: how to install the Update Rollup 2

  I recently bought a kindle fire hd but when I connect it to my computer with the usb connection, it shows not only a connected device on my computer.amazon tried to install windows xp media center edition 2005 (kb900325) .but it would not install it came a message saying I need to install cumulative update 2 first.î tried, but does not Please help

  Hi James,

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it looks that you are not able to install Windows XP Media Center.

  I have a couple of steps that should help you to solve this problem.

  Follow these 4 steps to install the KB925766 correctly:

  a. if the 886904 update is installed, you must uninstall the 886904 update before you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. Otherwise, the installation of .NET Framework 1.1 SP1 will fail.

  To determine whether the 886904 update is installed, follow these steps:

  i. click on start, run, type appwiz.cpl, and then click OK.

  II. Click to select the show updates check box.
  III. in the list currently installed programs, locate the following item:

  Fix for Microsoft .NET Framework 1.1 (KB886904)

  If you see this option, you must remove the hotfix. To remove the patch, click on the Microsoft .NET Framework 1.1 (KB886904) Hotfix and then click on remove. Then, visit the Windows Update Web sit to download and install the Update Rollup 2 for Windows XP Media Center Edition 2005.

  b. to install this update, you must have Microsoft .NET Framework 1.1 and .NET Framework 1.1 SP1 installed. Windows Update detects whether these packages are installed. Windows Update automatically installs these packages for you.

  (i) follow the link below to download the .net framework 1.1 manually:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en

  (ii) follow the link below to download the .net framework 1.1 SP1 manually:
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=en

  c. cumulative update 2 for the Windows XP Edition Media Center 2005 (KB900325)
  Follow the link below to download and install the KB900325:
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=e5daf37e-E243-4410-BC51-81cf2b56fe6e

  d.October 2006 Update Rollup for Windows XP Media Center Edition 2005 (KB925766)
  Follow the link below to download and install the KB925766:
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=8a2e5868-c2b9-4131-b08e-afc7cb0a6576

  Now try to install this update and let us know if it solved the problem.

  For additional help, refer to the article below:
  http://support.Microsoft.com/kb/925766

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• I have upgraded to Windows XP Professional and now Windows XP Media Center won't play DVD - component missing.

  Now I have Windows XP Professional after the upgrade to Windows XP Media Center Edition Home 2005. Now my Media Center won't play DVDs and I keep getting the error message "Missing Component". I tried to reinstll cumulative update 2 for Windows XP Media Center 2005 that has worked for me the last time I had this problem, but now I get the Error Message "you must have Windows XP Media Center 2005 installed to get this download and it shows already on my computer as installed components. When I reinstalled it 3 years ago he corrected the problem of DVD. Help, please

  Thank you for your help. Here are the answers your request:

  "Windows XP Media Center version 5.1 Edition - this shows when I"run"- winver - ok.
  Complete error message: "Missing Component - required component Media Center is.
  missing. Please contact the manufacturer of your hardware.
  KB article: WindowsXPMediaCenter2005-KB900325 - usa .exe
  The windows of origin is always on display as shown above, but I received a free upgrade to Windows XP Professional CD and installed on my computer. And under 'Information system', it shows as - Microsoft Windows XP Professional 5.1.2600 Service Pack 3.

  This problem started about 10 days when I used the CD of XP Professional to correct a problem. My computer is a Dell Dimension 5100 and I have two CDs that were sent to me - Dell - Microsoft Windows XP Professional SP 3 and Microsoft Windows XP Media Center Version 2005 with update Rollup 2.

  Thanks again and I ran the "fix it" you suggested but it have no problem found to fix. Every thing works fine on my system, but Media Center won't play DVD. It will play CDs and videos on my system.

  The initial problem was that I could not download the Blackberry Desktop Software - updates needed. The computer came with Windows XP Media Center Edition Home and I use Internet Explorer 8 as my default browser. I also use Mozilla Firefox as my backup browser.

  Please stick to your thread to avoid confusion of origin: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/i-have-upgraded-to-windows-xp-professional-and-now/f5245962-e9b4-4415-8aff-bc1d972f8120

  Note that I asked you to MOVE your original thread on the forum of material WinXP, not start a new thread.

  Also note that you don't have NO Windows XP Media Center Edition, installed now if you upgraded to Windows XP Professional.

  PS: If "winver" still says Windows XP Media Center Édition, did you not correctly upgraded & something is not. Better contact the Dell Support on this issue (if they'll still talk to you).

• Windows XP Media Center - Code 3 error when you try to watch the tv/record tv ratings, etc.

  I have a windows xp media center and all of a sudden when I try to use the media center, I get an error 'code 3' I tried to do a few different dates on the system restore but it did not fix the problem. I also tried to find out which driver to restore or reinstall but I don't really know what driver to do. I know that is not under the modem or a printer, but after that, I'm lost. Any help that anyone can give me would be greatly appericiated. Thanks in advance. Trevor C.

  Hello

  1. What is the exact error message?
  2 have you made changes on the computer before this problem?

  The following article might be useful:
  You receive an error message "Failed to save component", an error message "Critical process failure" or a "Tuner not found" error message after you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/910905

• Try to install the Update Rollup 2 for Windows XP Media Center Edition 2005 - on SP3.

  Hello

  All this started when my Xbox360 is dead, sent it for repair, came home another, all hung up and tried to connect to the Media Center. Of course, it did not work and the screen says to uninstall? (something), I forgot today, it has been a long road since then. BUT I uninstalled Update Rollup 2 for Windows XP Media Center Edition 2005 and updates that came after. NOW realize it was a mistake, I'm not of the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer. And I'm confused regarding why, for the first time, that I can't find a single KB article on this problem.

  And even if I did not restore the system off, there is no restore point on my machine.

  So I'm always searching in google and microsoft.com but a little lost right now.

  Moccan,
  Thanks for posting on the Microsoft answers Forum.  I would like to know if you read this article for the hotfix rollup: http://support.microsoft.com/kb/900325.  In particular the section more information, which has this:

  If the 886904 update is installed, you must uninstall the 886904 update before you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. Otherwise, the installation of .NET Framework 1.1 SP1 will fail.

  To determine whether the 886904 update is installed, follow these steps:

  1. Click Start, click run, type appwiz.cpl, and then click OK.
  2. Click to select the Show updates check box.
  3. In the currently installed programs list, look for the following element:
     Fix for Microsoft .NET Framework 1.1 (KB886904)

  If you see this option, you must remove the hotfix. To remove the patch, click Microsoft .NET Framework 1.1 Hotfix (KB886904), and then click Remove. Then, visit the Windows Update Web sit to download and install the Update Rollup 2 for Windows XP Media Center Edition 2005.

  If you haven't checked out on this yet, then follow the steps below and let us know the result. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP media center edition 2005 for SR1755NX

  Please, how can they get the Windows XP media center edition 2005, I do not have the disks. I have Compaq SR1755NX and I have the original product key for this desktop computer.

  This is the factory original specifications for desktop Compaq Presario SR1755NX. According to the specifications, the computer was introduced on 3 March 2006 and provided with Microsoft Windows XP Media Center Edition 2005 SP2. In this computer age, HP is no longer maintains an inventory of recovery disc for your system. Contact the third-party provider ComputerSurgeons.com to buy discs of HP recovery for your computer.

• How to enable the DVD library in WIndows 7 Media Center

  How do you enable DVD library in Win 7 Media Center?  I tried editing the registry as in Vista, but it does not work with Win 7.  I am running Win 7 Pro 64-bit version.  Thank you

  Hi zt75,

  Run you manually editing the registry?

  Have you clicked on fix it from the link below? If this is not the case, click on fixit and check if that helps.

  How can I enable the DVD library in Windows Media Center on a Windows Vista-based computer?
  http://support.Microsoft.com/kb/930526

  (Although this article is for Windows Vista, we can always give it a shot in Windows 7.)

  Or do these steps and check.

  To enable the DVD library in Windows 7, follow these steps:

  1. If Windows Media Center is running, close it.
  2. click on start.
  3. in the search box, type regedit.
  4. in the list programs, click on regedit.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  5. Locate and then click the following registry subkey:
  
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Media Center\Settings\Video settings

  6. in the Details pane, right-click VideoGalleryView, and then click on edit.
  7 remove the content that appear in the value data box.
  8. in the value data box, type Gallery, and then click OK. Registry value data: Gallery = Activate My DVD; Play = not to activate my DVD
  9. close the registry editor.

  To verify that the automatic fix worked, restart your computer. You should now see "DVD library" from the menu. To add DVDs, go to the menu information (click on 'i' on the remote control) and select "Add Movies.

  Try this also:

  1. If Windows Media Center is running, close it.
  2. click on start.
  3. in the search box, type regedit.
  4. in the list programs, click on regedit.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  5. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Start Menu
   
  Check if it has a value of HideDVD, and if the value data is set to 1. If the data in the value of HideDVD is set to 1, then you have two options. One option would be to delete the HideDVD value. The other option would be to change the value from 1 to 0 data.
  6. close the registry editor.

  EDITING REGISTRY WARNING:
  Important:   This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
  
  Additional information:

  http://blogs.technet.com/fixit4me/archive/2009/01/02/enable-Media-Center-DVD-library-fix-it-live.aspx

  Aziz nadeem - Microsoft Support

• When loading Windows XP Media Center Edition 2005, my Lifecam Webcam from Microsoft HD turns on and starts recording.

  Original title: Okay, I bet no one has ever heard of it...

  At the Media Center 2005 Rollup 2 loads, my Lifecam Microsoft HD Webcam turns on and I guess that starts recording. WHAT? What is happening with this? I have Windows XP Media Center Edition 2005, SP3.

  Hello

  -Did you change on your computer due to which the question has begun?

  I recommend you to start your computer in a clean boot State and turn off Microsoft Lifecam Webcam to run at startup HD.

  Note: Don't forget to restart your computer in normal mode by following the steps described in the article.

• I have windows XP media center edition version 2002 microsoft and try to reinstall office XP Professional with Publisher Version 2002, following a fall, but am rejected as an invalid key.

  I have windows XP media center edition version 2002 microsoft and try to reinstall office XP Professional with Publisher Version 2002, following a fall, but am rejected as an invalid key. I checked the key with the customer service - they say that it is valid and has sent me to you! Help please!

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851

  J W Stuart: http://www.pagestart.com

• Microsoft has stopped support for Windows 7 Media Center's Electronic Programming Guide?

  I've been using the Windows 7 Media Center to watch and record local televisions more of one year.  Now, my guide-schedule is not download new data.  I tried several times to update manually the programming data.  The EPG shows the update succeeded, but no new data is displayed.  Microsoft stopped providing data to guide programming?  If Microsoft still provides programming data, what can I do to fix the problem?  PS: I have similar problems on a second computer.

  After re - run the TV Setup at least 100 times, it * finally * downloaded and updated to the source of Rovi.

  Keep trying, it will work eventually.  Try to run the TV setup during off-peak hours, such as early in the morning.

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• Windows 8 Media Center Pack received not e-mail with key

  I bought Windows 8 Pro Upgrade today and installed windows 8 pro

  I see that Windows 8 Media Center Pack is free and gave my email for the product key

  Its been more than 5 hours now and no email has been sent and I see that a lot of people have had the same problem and they did not also get email with product key online

  Is there a problem with the system and when going to be fixed because I've seen no official response yet to explain why people do not get the email with the product key

  This requires an answer because it is not good the first day of the windows 8 released summer and the offer was not given to those who asked me

  I understand if it's a server problem and it overloaded with requests but can anyone Microsoft please update as to why we do not get the email with the product key

  Hello PaulBoland

  A recent response to another thread http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/i-have-not-received-my-product-key-for-my-windows/ecf1ec5a-231b-42e0-bb88-b2d9f21ad3a2 suggests that it takes at least 24 hours before the key is received.

  Remember that Windows 8 has only just been published, there will be thousands of people who are trying to get the software and the product key free for Windows Media center.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Side effects of installing windows xp service pack 3 upgrade on windows xp media center edition version 2002 service pack 2

  Will there be side effects to install windows xp service pack 3 update on my windows xp media center edition version 2002 service pack 2?

  Done correctly, installation of SP3 will have as a side effect, a very beneficial: Extended Support for WinXP (x 86) SP2 ends July 13, 2010. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed.

  How TO get a computer running WinXP SP2 fully patched
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b