Similar Questions

• Mouse Microsoft Wireless Comfort Keyboard 4000 and 5000 laser will not work with Windows 7. Is there a fix for this problem?

  I recently bought a new computer with Windows 7 installed and much to my dismay found my Microsoft Wireless Comfort Keyboard 4000 and Wireless Laser Mouse 5000 are not compatible with Windows 7.  If no fix that means I have to start avery good keyboard and mouse I used comfortable for a long time.

  When you try to load from the disk, the message informed me that it was not compatible and use the automated system to find a fix has not produced an answer.  My keyboard and mouse are in great shape and it is not necessary for me to replace it with a new one from a material point of view.

  The drivers for both devices on the drive that you are probably older versions, you should be able to download the latest drivers for Windows 7 in the pages below, you will need to choose which version of Windows 7, you are running, that is, 32-bit or 64-bit.

  Wireless comfort keyboard
   http://www.Microsoft.com/hardware/en-us/d/wireless-comfort-keyboard

  Wireless Laser Mouse 5000
   http://www.Microsoft.com/hardware/en-us/d/wireless-laser-mouse-5000

  If the above is not your exact devices check for them on the next page:

  Microsoft Hardware downloads
   http://www.Microsoft.com/hardware/en-us/downloads

  Kind regards

• Microsoft Wireless Comfort Keyboard 4000.

  I have a Microsoft Wireless Comfort Keyboard 4000. Recently, due to a compatibility problem caused immediately after an update of Windows, I had to reinstall Win 7/64. Since then, even using the original disk, I was unable to re - install this keyboard. Could someone please help

  Hi Carl,

  Thanks for posting the question on Microsoft Community.

  According to the description, it looks like comfort Wirless keyboard is not detected.

  I have a couple of steps that should help you with this problem.

  Try these steps and check:

  Method 1:

  Run the hardware and devices Troubleshooter and check:

  Check out the link

  Method 2:

  I suggest you to download the driver from this link keyboard and check:

  http://www.Microsoft.com/hardware/en-us/downloads#keyboard

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Logical disk partition not recognized in the New Installation of Windows

  Hello.  I would appreciate someone to give me any advice.  I don't know if the problem I encounter is an oversight on my part, but it was not something that I anticipated.

  To give a bit of background, until last week, I was running a Windows 7 system on my computer which included three hard drives (4 TB, 2 TB, and a smaller disk).  The 4 TB drive included my boot drive with Windows on a partition of 2 TB and then the unallocated space has been transformed into a new partition in disk management, received the drive letter G and was used for long term backup of data.

  Since then, I built a new computer and installed a new version of Windows 7 on a small SSD.  During this process, I have not all disks connected to the machine (except the DVD player) so that there is no possibility of installation of Windows, do something for these readers I didn't (I got burned by this time long ago when you reinstall Windows 95, which makes me just feel old).  After the whole installation process was performed and the new version of Windows has been working well, I opened the machine and plugged the drive 4 TB and 2 TB, assuming that Windows did not recognize them when I started.

  When I started in Windows, Windows does indeed recognize the two drives and assign drive letters.  But in the case of the car of 4 TB, he acknowledges that the partition containing my old boot drive.  No drive letter is assigned to the secondary partition.  When I go to disk management, it shows all of the remaining spaces as unallocated space, but seems not yet quite recognize space completely in the way he would if I'd created directly.  For example, if I right click in that box, I don't get the normal options to create a new Simple Volume.  Everything on this menu is grayed out except properties and help.

  So I guess I have two questions.  (Leaving aside the possibility of a hardware problem), was I wrong to assume that a hard drive divided into two partitions could be transferred from a Windows machine to another?  I honestly thought that no matter where no matter what Windows 7 machine would recognize the two drives, but maybe I'm missing something fundamental.

  Two and more important still, there advice for access to the data on this drive?

  Hello

  A problem that could happen is that the disk partition has security setting so that the profile of the user that created it would be able to access it, and seeing that you are trying to access from a new profile may not not allow you to access

  To access these files, you can try to boot from the old hard drive manually to change the setting of the partition or simply manually move the files and delete the partition.

  To start from the old disk hard restart have the hard drive is plugged in, restart the computer and while it is booting F12 key to select the boot device, after that, select the old hard disk and access them normally.

  hope this has helped.

• Old pc in enclosure hard disk not recognized by the new pc using windows vista

  Old pc unbootable.  Got a new laptop and want to recover data on the old hard drive.  Use a Sweex 3.5 IDE enclosure, to connect the old hard drive via the USB port again mobile. The hard drive is visible in device management, but not in my computer.  No idea how to solve this problem?

  Hi Tomvdv,

  At this point, it would be best to contact directly the Sweex.  It is the responsibility of the manufacturer to provide drivers for their devices:

  http://www.Sweex.com/en/service-support

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Keyboard model 1. 0 has Microsoft Wireless Comfort keyboard failure 1045

  My computer will not start because it is not hired keyboard-'Keyboard failure', I tried to reload the drivers without result; I removed the battery to drain CMOS and reboot without result.  All ideas, Greg

  [Moved from comments]

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, you are facing problems with the Microsoft Wireless Comfort keyboard. I will certainly help you in this matter.

  1. What is the operating system installed on your computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398 (also applies to the Microsoft Wireless Comfort keyboard)

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• Microsoft Wireless Comfort keyboard 1. 0a

  My keyboard Microsoft Wireless Comfort Keyboard 1. 0 has kept deleting characters.  I often have to book several times a button.   I can reset it and it works a little better for a short period, but then begins to drop characters even once.

  Reinstall the software/drivers will help? If so is there a link for this?

  On Wednesday, January 12, 2011 20:51:53 + 0000, geracis wrote:

  My keyboard Microsoft Wireless Comfort Keyboard 1. 0 has kept deleting characters.  I often have to book several times a button.   I can reset it and it works a little better for a short period, but then begins to drop characters even once.

  Reinstall the software/drivers will help?

  Probably not.

  If so is there a link for this?

  I am not sure, but it seems that either the battery needs
  replacement or the keyboard itself is a failure and he needs
  by replacing.

  Ken Blake (MS-MVP)

• Driver problem Microsoft Wireless Comfort Keyboard 5000

  I'm on Windows x 64 8.
  I have a strange problem with my Microsoft Wireless Comfort Keyboard 5000. Whenever I start the computer, the volume buttons (only ones) do not work unless I unplug the wireless adapter and plug it in again. I suspect a problem with the Microsoft Mouse and keyboard detection driver (USB) (version 9.2.154.0). I tried to roll back to an earlier version, uninstalling and reinstalling Microsoft Mouse and keyboard Center (latest version), using the default keyboard drivers Microsoft, even changing compatibility. The problem persists. Please note that I never had this problem when running Windows 7. Any ideas?
  Thank you

  It worked for me...

  1 remove the batteries.

  2 turn off your computer.

  3. move the dongle on another USB port. (USB 3.0 if you have one)

  4. put back in place the batteries.

  5 re-boot!

  It fixed my issue with all the key assignments!

  Good luck!

• WHAT IS THE MICROSOFT WIRELESS COMFORT KEYBOARD 1. 0A LIGHTUP?

  WHAT IS THE MICROSOFT WIRELESS COMFORT KEYBOARD 1. 0 TO LIGHT UP ON THE KEYS?

  Hi Conniedarragh,

  The keyboard and mouse functionality depends on different model. I suggest you to check for more details on the features of this model by using the Microsoft hardware Web site.

  You can check the link:
  http://www.Microsoft.com/hardware/en-us/downloads#keyboard

  Let us know if you need any other help on problems with Windows.

• How can I configure my keyboard Microsoft Wireless Comfort Keyboard 1. 0 has (1027)

  How can I configure my Microsoft Wireless Comfort keyboard 1. 0 (1027), there are buttons on here I know I can use real well. I just need to know how to set out them. can someone please help me.

  You have installed the Intellmouse drivers for it?

• Apple not recognized with the new update ID

  What now, after the update

  Apple not recognized with the new update ID!

  I have the same question. The user and the password are ok because I can log in here: https://appleid.apple.com

  But after the last update my iPad say that "the apple ID or the password is incorrect."

• Microsoft Wireless Comfort keyboard 5000 and mouse

  I just bought the Microsoft Wireless Comfort Desktop 5000 keyboard and mouse.  With the help of Visa Ultimate 32 bit.  Battery powered, followed the instructions, but do not connect not not the combine USB.  Use on a Dell laptop.  That both USB ports work with a multitude of other devices, connection ports directly, not through a hub.  Suggestions, anyone? THX.

  Hello

  • Did you try to uninstall and reinstall the keyboard and wireless mouse drivers?

  I'd say contact Microsoft hardware support for assistance.

  http://www.Microsoft.com/hardware/en-us/support

• Microsoft Wireless Comfort keyboard 1. 0 has (1027)

  have not used the above keyboard and mouse laser wireless 6000 for many months.  recently tried to use them with no luck.  changing the batteries on both devices.  now the mouse works fine, but the keyboard does not respond.  using vista 32 bit... any help would be appreciated.  Thank you.

  lightinthedark3300,
  Is there anyway that you can test the keyboard on another computer?  At this point we don't know if the keyboard still works or not.  You said that there no lights on this at all - not even for the shift caps lock, NumLock, and stop scroll?  There should be some kind of lights on the receiver of these functions and if those who do not work, then, the keyboard is probably defective.

  Here is a link to an article that has some good troubleshooting steps to wireless keyboards, including how do to re - sync with computer.
  The Microsoft wireless keyboard or mouse does not work as expected or respond intermittently
  http://support.Microsoft.com/kb/838398

  Let us know if this helped, or if you still need help.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 1 Microsoft Wireless comfort keyboard. 0a

  How to keep the default settings with the reset after a reboot. Is this possible?

  Hi lilypriest,

  ·         Changes in the mouse settings to register or not?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: You can also follow the suggestion of Shane from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/mouse-settings-not-saved-after-rebootrestart/5bf06673-6c48-46FF-a0d4-500f7a0b518a

• Microsoft Wireless Comfort keyboard keys stop working

  My comfort 4000 model 1045 keyboard works ok, but the "My Favorite" and the lever of the Magnifier on the keyboard, and the magnifying glass on the mouse button stop working.  Any help out there?

  John

  Hello

  1. What is the operating system installed on your computer?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Run the troubleshooter from the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Follow the steps from the link below.

  http://support.Microsoft.com/kb/838398