Similar Questions

• Microsoft Wireless Comfort Keyboard 4000 not recognized on the new 64 bit Windows 7 computer.

  Microsoft Wireless Comfort Keyboard 4000 not recognized on the new 64 bit Windows 7 computer. The computer thinks I have a keyboard 600 wireframe. I tried to install the IntelliType 8.2 64-bit for Windows 7 driver but it tells me that I already have a newer driver installed and won't let me install it. Are there specific drivers for this keyboard. I love the keyboard but I can't customize the special keys.

  Hi Tom,

  Check out these links and check if it solves the problem:

  "Troubleshoot the Intellipoint or IntelliType software installation, LifeCam.

  http://support.Microsoft.com/kb/953691/en-us

  "Troubleshooting: keyboards"

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth

  Please let us know about the status of this issue.

• Logical disk partition not recognized in the New Installation of Windows

  Hello.  I would appreciate someone to give me any advice.  I don't know if the problem I encounter is an oversight on my part, but it was not something that I anticipated.

  To give a bit of background, until last week, I was running a Windows 7 system on my computer which included three hard drives (4 TB, 2 TB, and a smaller disk).  The 4 TB drive included my boot drive with Windows on a partition of 2 TB and then the unallocated space has been transformed into a new partition in disk management, received the drive letter G and was used for long term backup of data.

  Since then, I built a new computer and installed a new version of Windows 7 on a small SSD.  During this process, I have not all disks connected to the machine (except the DVD player) so that there is no possibility of installation of Windows, do something for these readers I didn't (I got burned by this time long ago when you reinstall Windows 95, which makes me just feel old).  After the whole installation process was performed and the new version of Windows has been working well, I opened the machine and plugged the drive 4 TB and 2 TB, assuming that Windows did not recognize them when I started.

  When I started in Windows, Windows does indeed recognize the two drives and assign drive letters.  But in the case of the car of 4 TB, he acknowledges that the partition containing my old boot drive.  No drive letter is assigned to the secondary partition.  When I go to disk management, it shows all of the remaining spaces as unallocated space, but seems not yet quite recognize space completely in the way he would if I'd created directly.  For example, if I right click in that box, I don't get the normal options to create a new Simple Volume.  Everything on this menu is grayed out except properties and help.

  So I guess I have two questions.  (Leaving aside the possibility of a hardware problem), was I wrong to assume that a hard drive divided into two partitions could be transferred from a Windows machine to another?  I honestly thought that no matter where no matter what Windows 7 machine would recognize the two drives, but maybe I'm missing something fundamental.

  Two and more important still, there advice for access to the data on this drive?

  Hello

  A problem that could happen is that the disk partition has security setting so that the profile of the user that created it would be able to access it, and seeing that you are trying to access from a new profile may not not allow you to access

  To access these files, you can try to boot from the old hard drive manually to change the setting of the partition or simply manually move the files and delete the partition.

  To start from the old disk hard restart have the hard drive is plugged in, restart the computer and while it is booting F12 key to select the boot device, after that, select the old hard disk and access them normally.

  hope this has helped.

• Apple not recognized with the new update ID

  What now, after the update

  Apple not recognized with the new update ID!

  I have the same question. The user and the password are ok because I can log in here: https://appleid.apple.com

  But after the last update my iPad say that "the apple ID or the password is incorrect."

• I have photoshop elements 13 on disc, but for some reason, it does not load on the new computer with windows 10 can you help me?

  I have photoshop elements 13, but it does not load on my new computer with windows 10 can help you?

  Copy the contents of the drive in a desktop folder and install from this directory.

  If this fails, explain what you see while trying to install.

• R720 PE hard disk not recognized

  It is a newly purchased machine without BONES. I tried to install Windows server 2008 R2 Standard but stalled to the point that the drivers for the hard disk had to be loaded. In preparation for the installation I downloaded all the drivers on the material and has a drive ready for entry. Files were burned directly to the root directly but always installation failed because he could not find the readers. I can't spread their wings to get Open Manager or other tools started because readers cannot be configured.

  Can someone tell me how to get started with it? Thank you, ykelley

  You need drivers.  2008 R2?

  http://downloads.Dell.com/FOLDER02416328M/2/SAS-RAID_Driver_W2K8R2_D5N8T_A06_6.802.21.00_ZPE.exe

  Download and run to extract, the put option are the files are in a flash drive, click load drivers a link on the page that says no hard drives.

  Why RAID 0?

• How can I purchase back level versions of Windows to restore hard disks not bootable corrupt in several Versions of Windows

  I have several SONY computers that hide the source code for VAIO and Windows code in the hidden partition.  I can't buy Sony versions of food because they are more up-to-date except one on Vista. I bought the original code for a 2007 Vista SONY and I'm in my third day of restoration of this system. These SONY computers were cutting-edge at the time I bought them and contain historical data such as taxation, Quicken financial and video making tools and souvenirs. I bought five hard drives that correspond to these various computers and MS Windows 7 Ultimate and professional XP I could check the operating systems MS now called counterfei and locked the keys. The DVD have all markings defined by authentic SM, (never open COA label, proof of license, inner mirror band hologram, perimeter edges wavy DVD hologram, dynamic, fix security logo, etc...).  This is two copies of Windows 7 Ultimate, XP Professional complete Edition.  I need trouble Media Center 2005 on intel dual 3.6 Ghz with 2 GB of mem, XP Professional upgrade of home double 2.0 Ghz 1 GB mem and Vista 32 bit.  MS denied that these are authentic and has blocked their execution.  Their solution is to buy genuine from Ms.  Since Windows in backward compatibility where and what to buy to fix these broken MS insecurity not corrupt vulnerable buggy tested untrusted Windows operating systems?

  I have maybe two HD that have the same system and the product key, but we are not bootable on Windows 7 Ultimate machine.  Any suggestions for a tool that I can fix develop not bootable would be appreciated.  I tried several such as Paretologic and Spotmau with no luck.  This is getting really expensive general MS deficits.

  Hi Boomer6005,

  ·         What is the error you receive?

  ·         How have you activated Windows?

  You can see:

  Windows 7: Activation Windows 7: frequently asked questions

  Windows Vista: Windows Activation: frequently asked questions

  Windows XP: How to activate Windows XP

  Also, try to connect hard disks as a slave to a working machine drive to recover data.

  What about the versions of Windows Media Center, those who were OEM (Original Equipment Manufacturer) specific and if the OEM cannot provide a replacement, you will not be able to find one.

• Hard drive not recognized on the computer after the upgrade to Vista

  I just upgraded to vista a my ext hdd does not come in computer how to install human and format the hard drive?

  What's your Vista-compatible external HARD drive? http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  Have you loaded the proper drivers, firmware or software for the external drive and your version of Vista?  He can't just plug-and-play, especially if this isn't original USB key but a convert.

  Once it is recognized by the system (if it is compatible and once the drivers are installed), go to start / Control Panel / administrative tools / computer management / management of records and right click on the external drive that shows there or format to change the drive letter or a similar task.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• New HARD drive not recognized by the SAS on PowerEdge T410 controller

  One of the drives has failed on my RAID 1 configuration, so I bought a non-certified dell, Seagate Barracuda 500 GB drive (other readers were 250 GB).

  I turned off the machine and swapped the failed drive with a new one (cable connections)

  When I boot in Sas (SAS 6 ir) controller, it shows that the disk is missing.

  I turned off the server and changed the cables from the primary to the new disk, to see if it would make a difference. None. Watch again ' driving status: missing.

  What I have to buy dell certified readers? I'm doing something wrong? Or is the obsolete RAID controller?

  Any help would be appreciated! My primary hardrive gives signs of failure. I have a picture of him, but I'd like to get it mirrored on my new record ASAP.

  Thank you

  Hello director87

  Go to the RAID properties > manage table > manage Hot Spare disks. You should see a list of all drives that detects the controller. Your RAID 1 drives will be listed as primary and secondary. The new drive should not be anything in the area of the 'State of the drive. Use the arrows to select the new disk and keys to assign it as a spare drive + /. After you assign it as a spare drive it should start to rebuild.

  If you don't see the drive in the list, then check the screen of the SAS topology. If you see in the SAS topology then use CTL D to shoot to the top of the additional options. Let me know if it will allow you to do something to the reader in this screen. If you don't see in SAS topology then it does not appear that the controller is able to communicate properly with this player.

  Thank you

• Floppy drive to ASR disk not recognized at the end of the backup on external drive

  Before you back up to an external hard drive, I'm warned I need a disc to record recovery system information.  Once the backup is complete, I said that he cannot make the ASR diskette because there is no disk drive.  But there is a car and I loaded it with a new DVD.  It shows the disc and the MBs available on the DVD by clicking on 'computer '.  How can I get the backup program from Vista to recognize that the floppy drive is there and ready to accept the ASR information?

  Hi RitaGowen,

  (a) edition of windows vista you run on the computer?

  (b) how exactly you are trying to back up files? You try to create an automated system recovery (of the ASR system) disk?

  Please, give the full error you receive to better understand the issue.

  You might want to know

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  Back up your files - frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Password not recognized for the new Gmail account

  My gmail account ID / password is not recognized by Thunderbird. It worked, but somehow it has suddenly stopped working (not able to receive or send emails and just make an hourglass whenever I select any folder in the account).

  Some other details:

  . I use Thunderbird 38 (could the upgrade caused the problem?).
  . I tried to remove and re-add the account. It connects fine, but does not recognize the username/password.
  . I did some Google 2-step of checking is turned off.
  . I deleted the Google Contacts.
  . I checked that access for less secure applications is disabled in Google (even though I believe that Thunderbird 38 should not require this).

  I followed all the steps I find Google search, including the https://support.mozilla.org/en-US/kb/thunderbird-and-gmailsite. Nothing seems to help.

  I'm up a Creek. I like Thunderbird (use it for multiple e-mail accounts), but hair pulling try that it works - and it takes too long. Any suggestions?

  Thank you.

  account15:
  ENTRANTS: account15, (imap) imap.googlemail.com:993, SSL, OAuth2
  OUTBOUND: smtp.googlemail.com:587, SSL, passwordCleartext, true

  You will need to set OAuth2 authentication for the SMTP server as well.

• Flash Player 11.9.900.117 not recognized by Opera and Firefox on Windows Vista (32-bit) SP2

  I use 4 browsers on my laptop Toshiba Windows Vista (32-bit) SP2:

  Internet Explorer 9

  Google Chrome Version 30.0.1599.101 m

  Opera Version 17.0.1241.45

  Mozilla Firefox Version 24.0

  I just downloaded and installed Flash Player 11.9.900.117, which is recognized by IE9 and Chrome from Google, but not in Opera and Firefox, even after closing the browser and re-start.

  How can I get Flash Player to work with Opera and Firefox?

  Thanks for your help.

  See you soon,.

  Joel
  

  There are two different versions of Flash Player for Windows (3 If you count Chrome)

  ActiveX which is ONLY for IE,

  Flash Player for other browsers which is for Opera, Safari and Firefox, and

  "PepperFlash" that is built into Chrome by Google.

  Download the tool or another browser version will have NO EFFECT on Chrome.

  Download of the ActiveX version WILL NOT install a plugin for Opera or Firefox because they do not use controls ActiveX - NO browser but IE uses not since about 2001.

  Download Adobe Flash Player for Firefox and Opera setup directly by clicking on the following link.

  Flash Player plug-in (all other browsers)

• Updates not working after the new installation of windows xp

  Recently I have formatted my hard drive and reinstalled windows xp. I can't get updates for some reason. I try to get the answer "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem"can someone help me?

  Hello

  -Is a 64-bit or 32-bit computer?
  -What service pack have installed you on the computer?

  Is there an error with the error code.

  This issue is due to not having the latest version of windows update agent on your computer. So I would say you please install the latest version of windows update agent on your computer, and I am sure that this problem will be solved. Here is the link to download.

  How to get the latest version of the Windows Update Agent
  http://support.Microsoft.com/kb/949104

  Run the fix which will be offered to you when you open the page above.

  Once this is done, better also install you the latest windows installer to ensure that the windows service install is running.

  Install install 4.5, if you have XP SP2 or higher and install install 3.1 if you do not have a service pack or even if you have Service pack 1.

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8483

  Windows Installer 3.1 Redistributable (v2)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25

  
  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  You receive an error message "0x800A01AE" or a "0 x 080070570" error message when you try to connect to the Windows Update Web page or to the Microsoft Update Web page in Windows Server 2003 or Windows XP

  http://support.Microsoft.com/kb/910359

  I hope this information helps you!

• Can not extract music from a CD using Windows Vista media player 11.

  I have windows Vista... 32-bit. Recently I not was able to rip music CD to my computer using windows media player 11. I can always open and watch DVD movie. When I go and select Rip it just is there and nothing opens. He will play even not audible a CD. It is once again, only occurring not music videos.

  You can try the suggestions to http://support.microsoft.com/kb/982116 . Especially remove the drivers and then reinstall them can solve the problem. Tim Baets
  http://www.BM-productions.TK

  You can try the FIXIT from Microsoft to see if it will deal with your problem with no sound.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems/

  http://support.Microsoft.com/GP/NO_SOUND/

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Scanner not working not not on hp deskjet 3056A. Using Windows Vista.

  I just installed a HP Desket 3056 A printer and the scanner does not work. All I get is a page full of multicolored lines. My computer is a Del Inspiron 1525 Windows Vista.

  Called HP they send me a new printer. Thank you for your help