MIDI playing sounds bad

Similar Questions

• Firefox does not play sound in any HTML5 player.

  When trying to play any sample of any album sold in Bandcamp.com the player starts to play, but there is no sound. Meanwhile, other browsers it plays very well.

  I use the last FF, I tried to disable various addons and plugins, but it did not help (they are not sound related in any case).

  I run on Win8x64.

  Update: the sound plays very well everywhere else on Firefox. YouTube, etc. He plays everywhere except Bandcamp.

  And the Bandcamp player is not Flash, it has nothing but associated with Flash. It's the HTML5 player.

  SOLVED

  Finally, after hundreds of hours I fixed it and Firefox plays sound in HTML5, YouTube (HTML5 mode), SoundCloud, Bandcamp and etc.

  It takes: right click on your speaker icon / in the system tray and select playback devices, go to properties of speakers (one that is green-checked, also turn off the reds, as appropriate), then go to improvements and check Disable all sound effects. And that of it, restart the browser and enjoy.

  In short: Volume mixer-> peripheral reading-> reading tab-> properties-> improvements speakers-> disable all sound effects-> restart of the browser.

  I use latest stable Firefox 23.0.1 on Windows 8 x 64 (but Firefox is 32-bit).

  In addition, if didn't need help, make sure that you have media.windows - media - foundation.enabled value 'true' about: config.

  You should also have a few decent codecs installed on your machine, I have VLC Player and it comes with lots of built-in codecs. Also make sure you have VLC Web Plugin active in Add-ons-> Extensions (always activate)

  So the answer is which a problem is who? Is Firefox? Or Windows 8? Or my fault of Realtek audio drivers? (In any case without disabling sound effects, HTML5 works fine in another browser, so I blame this nonsense for additional configurations in the audio settings of Windows with Firefox)

  So pretty much it.

  See you soon,.
  rhazor

• Pavilion DV4: Laptop plays sound through headphones but not by internal speakers

  Audio was working fine on my laptop, when suddenly the laptop would not play sound with internal speakers.  If I plug in headphones sound is fine.  Execution of control panel of configuration/sounds shows 'Speakers and dual headphone - IDT High Definition Audio CODEC' enabled and set as the default device, as well as "independent double headphones" (enabled by default but not) and 'SPDIF (Digital Out via HP docking station)' disabled.  What can be wrong?

  Cure the problem by uninstalling the CODEC driver, then restart Windows then reinstalled, and now things are ok again.

• How can I get iPhone play sound of favorite when text DND?

  Hello

  How can I get iPhone play sound of favorite when text DND?

  It plays the ringtone for a call when DND of a favorite but not identified a favorite texts me

  Thanks in advance

  You do not have. Notifications for all the messages are deleted when DND is turned on.

• I have just updated to Windows Media Player 11. I have a .avi file that only plays sound with no video.

  Media Player

  I have just updated to Windows Media Player 11. I have a .avi file that only plays sound with no video. I'll see a message asking me to information center to display information about the file being played. Thank you

  Download codecs here: -.
  http://www.DivX.com/en/software/DivX-plus/Codec-Pack

  Otherwise, you can download and install VLC: -.
  http://www.videolan.org/VLC/download-Windows.html

• Media Player 11 plays sound but no video dvd XP OS

  I have the nvidia decoder installed, but when I try to play a DVD I'm unable to see the video.  Plays sound, but no video.  I'm on Windows XP OS

  Hi Jen,
  seems that all codecs are not installed (normally you should not have to pay for a codec, I would check and make sure that no other only files where installed) done everything, try this:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=507
  hope this helps,
  Eddie B.

• HDMI has stopped playing sound using Vista

  I have been using a HDMI cable to play Netflix on my TV via a laptop computer for a couple of years.  Suddenly, yesterday, I hooked it up and plays the video but not sound.  The sound comes through the speakers.  I went on several forums looking for answers to the problem "hdmi will not play sound" and none of the solutions work.

  For example, I did this: click Start, go to control panel, go in where it says hardware and audio and click the words 'Hardware and Sound', then the third option down, is "Sound". On the right under 'Sound', he says 'manage Audio devices '. Click on that and then click on where it says "device (HDMI) digital output" when that highlights, go down and click on "Set as default", then click on 'OK '.
  I do not see the DEVICE of DIGITAL (HDMI) OUTPUT in the box "manage audio devices" and it can be a problem, but what is confusing to me, is that I used to be able to play sounds without any problem, and now I can't.
  Something has changed, but I don't know what.  Microsoft has made an update that now interferes with the sound hdmi?

  Hello

  Make sure that the physical connections are properly connected. You can do the system restore, see if it works very well.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• its library files stop playing sound

  Why my Media Player plays a song for a few seconds and then sound stops but continues to play the song. (the bar at the bottom of the window that shows continuous progress to go as if it was when he played sound)

  Hello

  ·        You get an error message when the audio stops playing?

  ·        Since when are you facing this problem?

  Method 1:

  See also the link below to run the fix to fix common problems with audio in windows vista:

  http://support.Microsoft.com/mats/NO_SOUND/

  Method 2:

  If the problem persists only with Windows Media Player, then you can try to uninstall and reinstall Windows Media Player, to do this follow the steps in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Method 3:

  You can also try to update the audio drivers for your system and check if it helps resolve the issue.

  For more information on updates to the drivers, please refer to the link below:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• AVI video files play sound but no video in Windows Media Player 7

  My video files avi play sound but no video in Windows Media Player 7. Video files avi are since 2002 and has played very well until I'm a new PC with Windows 7 so I know that the files are not corrupt. All my other files and videos play fine in Media Player. I checked online and seen the posts in other forums on the codecs being the problem. Does anyone know how to fix this? Based on the other forums I found it seems that it is not uncommon that a problem with Win7.

  Also, is it possible to convert audio and video files in different formats with Media Player? Or do I need any other software to do this?

  My video files avi play sound but no video in Windows Media Player 7. Video files avi are since 2002 and has played very well until I'm a new PC with Windows 7 so I know that the files are not corrupt. All my other files and videos play fine in Media Player. I checked online and seen the posts in other forums on the codecs being the problem. Does anyone know how to fix this? Based on the other forums I found it seems that it is not uncommon that a problem with Win7.

  Also, is it possible to convert audio and video files in different formats with Media Player? Or do I need any other software to do this?

  It is not that there is a problem in Windows 7, it is more likely that you don't have just the installed CODEC the video file is saved with.  You will need to find a source, download and install any CODEC no MS yourself. You can use GSpot to identify CODECs used in AVI files. An alternative to downloading of many individual CODECs is to install FFDSHOW instead. Some media players like VLC and Media Player Classic also have internal CODECS and support for a wide variety of video and audio file types.

  http://www.headbands.com/GSpot/

  http://ffdshow-tryout.sourceforge.NET/

• How to play sound headphone only

  Hey guys and girls

  recently, I bought a new headset, and it seems that windows won't play sounds only in the helmet as long as the speakers are turned on.

  in other words, music plays in the two headphones and speakers and not just in the headphones i unless:
  Unplug the speakers
  Turn them off
  disable them with a ridiculous amount of clicks. funny, is that I always forget how I did the last time >.

  So what I want to do, is make headphones have priority on the speakers without turn it off or unplugged.

  I also can't use the connectors on the front panel for a reason even if they appear in the ' Manager high definition realtek audio.

  Hello

  Method 1:

  I suggest to go to sound settings and turn off the speaker device for the only sound from the earpiece. To do so follow the steps below.

  1. click on Start

  2. go to Control Panel then hardware and audio.

  3. click on sound, it will open a window with all audio devices it contained therein.

  4 turn off the speaker by right-clicking on the " speaker " icon and select disable .

  Method 2:

  To make the helmet of your default audio device, follow the procedure below.

  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new window click on the "Playback" tab and right-click in the window and click disabled devices onShow.
  4. now check if headphone is listed there and right-click on it and choose activate.
  5. highlight this headset and click "set as default".

  It will be useful.

• My speakers will not play sound no matter what I try.

  * Original title: sound problems

  I have windows 7 and I don't know exactly what I was doing, but now my habit of speakers play sound no matter what I try, someone help me please.

  Through this https://support.microsoft.com/en-gb/gp/no_audio_playback_windows

  If no joy try this https://support.microsoft.com/en-gb/mats/audioplayback

• Internet Explorer will not play sound with no explanation that I can find. Help

  I am running Windows 7 with I think it's Internet Explorer 8.

  I had my IE under Mixer volume muted during last week and discovered he won't play no sound now when I disabled the program. For all purposes, the volume mixer shows that it play a sound. All my other programs play sound, system sounds are correct, just like the games.

  After reviewing the responses to other messages here, that's what I tried without success.

  Volume mixer IE is not set to mute, nor is another program.

  Checked under the tools/advanced/multimedia, and ensured that the audio check box was selected: it is.

  I run cmd.exe under administrator rights and put in the sfc/scannow

  This can 100% complete and it 'not found any breach of integrity.

  I tried to run IE with no Add-ons - however, I could not find a program that would make it sound.

  My antivirus has completed a quick scan with no self-esteem.

  I'm still running my antivirus as a full sweep, however, I'm hesitant... to wait until it yeilds it is result.

  Help?

  Hello

  Method 1:

  Maybe you don't have the right plugins/addons installed to play sounds. Need of plugins for interactive media include generally:

  (a) Adobe Flash.

  b)      Java.

  To install these plugins, open Internet Explorer and visit the links above. Follow the instructions on the pages listed. After installing these plugins and restart Internet Explorer and check to see if you hear the sound?

  Method 2:

  I suggest you update the audio drivers on the manufacturer's Web site see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Method 3: Also suggest that you click on the link below to reset Internet Explorer settings and check if the problem still persists. http://support.Microsoft.com/kb/923737

  Warning: resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  Hope this helps,

• Media Player 12 on windows 7 is unable to play sounds on mpg file created using arcsoft total media 3.5

  in question .mpg files use the audio codec of arcsoft. These same files play with sound on wmp 11 Vista ultimate on another machine. Both have total media 3.5 installed.

  These .mpg files also do not play in the computer of windows 7 using win 7 media center or film maker.

  WMP 12 shows that the arcsoft audio codec is installed.

  In addition, some .mpg files created by ArcSoft show no video or audio in wmp 12, but work correctly on vista with wmp 11 system.

  a noticeable difference in technical support for windows media information is the presence of Microsoft MPEG-1hd Audio decoder under the mpeg/dvd filters in the list for wmp11 but not wmp12. I am unable to find this codec for installation.

  any suggestions on how to find sound would be greatly appreciated. Thank you.

  Addendum: other mpg which were extracted independently of Arcsoft files also do not play sound in wmp 12. The property indicates the same audio codec association of arcsoft. Tried to uninstall and install the window media components but no change.

  Thank you!

  I had the same problem one solved it just by setting filter audio decoder arcsoft merit for 0 x 600000 with Gspot.

  JDCR

• play sounds after receive a boost BIS

  Hi, how can I play sound after receive a boost of BIS.

  When you receive the doorbell to your application, start a player:

  http://supportforums.BlackBerry.com/T5/Java-development/audio-and-video-playback/Ta-p/442788

• Play sounds in the order using MediaPlayer

  Hello. How to play sounds in order?

  For now, here are my code.

  I have a MediaPlayer component as an attached object

  http://developer.BlackBerry.com/native/reference/Cascades/bb__multimedia__mediaplayer.html

  attachedObjects :[
      MediaPlayer{
         id: sound
         sourceUrl: "asset:///sounds/sound1.mp3"
      }
  ]
  

  Then I have a button. Here is what my code for it

  Button{
     id: play
     text: "Play Sequence"
  
     onClicked :{
  
        sound.sourceUrl = "asset:///sounds/sound1.mp3"
        sound.play();
        sound.sourceUrl = "asset:///sounds/sound2.mp3"
        sound.play();
        sound.sourceUrl = "asset:///sounds/sound3.mp3"
        sound.play();
  
     }
  }
  

  What goes wrong.

  The code runs after 1 second about, cut the next sound. I'm doing his next game, after the end of his previous.

  

  The sounds are not finished because play() is not a call blocking. Once you call the play() function it will start playing the sound and return immediately to the following line of code in the QML. If the next line is a call to the play() still it will have precedence over previous sound, i.e. If you think logically about what you need in an application, you would not have the sound of a doorbell 2 seconds later, play just because you play already a sound, you would stop, as it does.

  My suggestion to use a selection intended to use the MediaPlayer playlist function, that you implemented will obviously suffer from the same problem for the above reason. A playlist is a separate file that contains a list of media you want to play and can be in different formats.

  My other suggestion of using onPlaybackCompleted does not seem to have been followed by you, but is probably the easiest to implement.

  MediaPlayer {
      id: mediaPlayer
  
      onPlaybackCompleted: {        count = count + 1;
          var s = count;
          mediaPlayer.setSourceUrl("asset:///sounds/sound" + s + ".mp3");
          mediaPlayer.play();
      }
  
  }
  

  Where count is a comprehensive, defined property to 1 in your QML file and you have some relaxation (onCreationCompleted or clicking a button) to start the first play().