MIGRAR a UN SQL Server Vcenter data base

Similar Questions

• create the SQL server programmatially data source

  Hello

  I would like to create a SQL server by programming in LabVIEW data source. The SQL server version that I used is from 2005. Can someone give some ideas? An example of code will be more favorable.

  Thank you

  Jane

  You can build the connection string you even.  The open function in the Toolbox of data base accepts a string as well (it's polymorphic) who can be the connection string.  This is the site I use to understand.  Is the most common things.  You may need to search Google more specific elements.

  http://www.ConnectionStrings.com/

  If you want to use the other option, someone has achieved a UDL editor in LabVIEW.  You can use this code to create your own UDL which can use the Open DB function:

  https://decibel.NI.com/content/docs/doc-18613

  I have used the above code, so can't comment on that.

• Problem installing SQL server on a basis DBVM.

  Hello

  I create a DBVM with Server 2008 R2 and SQL Server 2012. I can't complete the process. That's what I've done so far:

  -Created the DBVM indicates the iso of Windows Server 2008 R2 64-bit and SQL Server 2012 install iso.

  -J' used the Setup file of Microsoft SQL Server 2012 (filename: SQLFUL_ENU.iso). Director of the app ask Standard or Premium edition, but I was not able to download a specific version.

  -After clicking OK in the "Creation of Base of DBVM" window, I get the full Base DBVM. However, it doesn't have the DB installed.

  -On the screen data Director - eat and monitor that I can right click the new created DBVM base and choose "Install DB engine."... »

  -In doing so, which indicates the ISO specified previously, on the right-hand side, under tasks, I have a current task:

  Install agent vFDD and DB engine stuck from the GET to 66%. After a while, an error is displayed. "An error has occurred in the agent. Error message: failed to execute the command. Check the log of the Agent for more details... Exception: ("do not execute the command. Please check the log of the Agent for more details. "(, None)" "

  In the newly created DBVM, nothing in Event Viewer indicating why this is happening.

  -Where can I find more information?

  -J' use a version of sql wrong?

  Is there a communication problem between the D data and created new VM?

  I'd appreciate any help.

  Concerning

  Fernando

  Hi Fernando,

  I also have to deal with this question later. and I fixed it as admin guide with following. hope it's useful for you.

  Path

  You must specify the path (or location) to assign virtual disks

  for each type of disk. The path is the mount point for Linux, or the volume name

  for Windows.

  When you specify a path to virtual disk for the Windows operating system, the

  C: by H: drive letters are reserved for use by the base DBVM. You can use

  the I: drive letters or above to specify the volumes for use as data or log disks.

  NOTE you must provide a mount point or volume name that is not already

  There are. If you specify a duplicate mount point that is already in use, Director of data

  Returns the internal address error message may not be reproduced or

  empty when you try to convert a DB model the DBVM.

  Kind regards

  Bob

• Display SQL Server Oracle data error

  Dear friends,

  I use Oracle10g XE.

  I made a link to view or insert data into Oracle's SQL Server database.

  I did all the things with the help of the link below.

  http://www.databasejournal.com/features/Oracle/article.php/3442661/making-a-connection-from-Oracle-to-SQL-Server.htm

  Everything worked well. but when I run query below

  Select "EmployeeNo" in hrtattendance@mysqlserverdsn

  It gives an error that is mentioned below

  ERROR on line 1:

  ORA-28545: error diagnosed by Net8 when connecting to an agent

  Impossible to reteieve text of MESSAGE NETWORK/NCR 65535

  ORA-02063: preceding 2 lines of MYSQLSERVERDSN

  Help, please. I will be grateful.

  Kind regards

  Hi Klaus,

  Now it works after

  run

  lsnrctl start listenermysqlserverdsn again.

  This means that it is not auto-start. Anywayz it's done. Thanks a lot for your time, help and support.

  I am very grateful to you.

  Thank you and best regards,

• SQL server 2000 data source

  I have CF running on Server 2003 R2 standard 7.0 and sql server 2000.
  I configure sql server to use windows authentication and created a SQLService system for her user name to use.
  Everything is on the same machine, and I just want to make a data source...
  I've tried about 30 different combinations of things and get in every time the same error...:
  
  Connection verification failed for data source: dragon1
  java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] error socket creation. Connection refused: connect
  The root cause was that: java.sql.SQLException: error [Macromedia] [SQLServer JDBC Driver] socket creation. Connection refused: connect
  
  I put 127.0.0.1 for the server, port 1433
  I tried to put in the SQLService username and password, as well as my administrator username and password, and got the same previous error on both. I tried to use localhost and (local) for the server, without success.
  
  Can someone tell me what im doing wrong?
  This is a default error message that always appears, or you would get a different error message if it was just the wrong username and password?
  
  Any information would be helpful!
  
  Thank you!
  Mike
  

  I finally found a post that I needed...

  http://www.Adobe.com/cfusion/webforums/Forum/MessageView.cfm?CATID=6&ThreadId=934725&highl ight_key = y & keyword1 = connection % 20refused

  He seemed overwhelmed at first, but seems to work in my situation as well.

  A side note to mention is that in your windows odbc window, you must switch to the system, instead of the user a dns dsn tab.

• Mask of SQL Server select Date in the statement?

  Hello
  I'm trying out my request in a cfgrid, but I have a date field I want to hide, but I can't figure out how?
  
  A response could be to hide the date in my SQL statement, can someone tell me how?
  : S
  
  Thank you!

  I got it to work using:

  SELECT CONVERT (VARCHAR (10), dispto, 103) AS dispto
  in my query.

• Unable to connect to the TechNet Virtual Lab SQL Server 2008 Data Mining Add-ins for Excel 2007.

  I'm new in the virtual lab environment.  I try to log to the virtual lab without success. I don't get any specific errors.  The user name / password window keeps popping no matter what I enter as username and password.  Help, please.

  Hi Diegolzarra,

  Have you tried disabling add-ons to Internet Explorer?  Please see the following link for more details:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

  In addition, please see the following link where you can request support for your virtual lab connection problem:

  https://CMG.vlabcenter.com/SupportRequest.aspx?ModuleID=9f0d7f08-4028-4342-b17a-9a31076c75cd&loc=1

  I hope this helps!

• convert data from oracle to sql server functions

  In oracle, I get the result.

  floor ((trunc (INF. INFUSION_DTE) - trunc(S.BIRTH_DTE))/365.25) as PATIENT_AGE,)

  example: patient_age is 30

  How to write in sql server, looking for the same result as an oracle.

  CONVERT (VARCHAR (12), t.event_dte, 111) event_dte,.

  CONVERT (VARCHAR (12), p.birthday, 111) anniversary.

  Google is your friend... search for "sql server convert date of birth age" and you will get many examples. And here's one:

  DATEDIFF (hour, p.birthday, t.event_dte) / 8766 as age

  HTH,
  Brian

• Peformance Gain for a different drive for the SQL Server data and log (VM) file?

  Hello

  It is suggested to separate SQL Server 2012 data and log files in different drive for VM.  Is there a performance gain if two of them resided in the same logical (Partition VMDK) unit number?  OR should they (different dives) in different LUNS (Partition VMDK)?

  Thank you

  The General mantra in the physical world goes as follows:

  For optimal performance, you need to separate logs and database of transactions on different physical disks (e.g. disks) stacks.

  
  

  This general concept applies naturally agnostically to virtual workloads as well. It essentially translates to:

  For performance, you should put the files of database transactions on various resident on different LUNS VMDK or use separate RDM. You should also use a separate vSCSI controller to each VMDK/RDM as the controller has its own IO queue.

  There is a point more important which is often neglected in the physical and virtual world in particular:

  Ideally, you should make sure that your physical LUN for logs and DB are not a group of common disk same stacks of physical disks. This violates the general concept above.

• Comments not imported SQL Server data dictionary. SDDM 3.3.0.747

  Hello
  
  SDDM 3.3.0.747 32-bit on Windows 7 64 bit.
  
  Comments are not imported from the SQL Server 2008 data dictionary. Connection via Microsoft JDBC Driver for SQL Server jTDS 1.2.7 4.0
  
  What did I try? In generation SDDM DDL, comments in DBRMS for SQL Server are generated with ' EXEC sp_addextendedproperty 'MS_Description', 'Test comment'...» "so I added an extended property named 'MS_Description' in the database SQL, both on the table and column. None of them have been imported from the SSDM data dictionary. I tried the above two pilots. Is this a bug or am I missing something?
  
  I found the similar question thread Re: data dictionary import does not import comments from the column for SDDM 3.0.0.665, so I guess it's a bug when importing with JDBC drivers.
  
  MiGli
  
  Edited by: MiGli_1006342 may 25, 2013 08:32
  
  Edited by: MiGli_1006342 may 25, 2013 09:02

  Extended properties have been imported correctly no database SQLServer to DM 3.3.0.747.

  Calls to sp_addextendedproperty and fn_listextendedproperty have changed.

  I don't think it's a problem with JDBC drivers.

  One bug fix should be available in the next version of the DM.

• Data migration from Oracle to SQL Server

  Hello
  
  I have the Oracle database in one or several table, I also blob data, i.e. images are stored, now I want to move that data to the sql server database, which is the best way to do this?
  
  I would like to test for a migration of the table that contains the image data in the Oracle database and invade the SQL Server table.
  
  How to test for an Oracle table data to SQL Server migration?
  
  But the first thing I want to confirm is that if the Image from Oracle DB to SQL Server DB data are possible? is there something must be supported during the migration?
  
  Thanks in advance.
  
  Kind regards
  
  Vishal
  
  Published by: 968331 on October 31, 2012 02:31

  I think that it is supported. The equivalent data type in sql server is IMAGE/varbinary (max)

  See the bottom of the article for the mapping of data types:

  http://weblogs.sqlteam.com/jamesw/archive/2010/07/28/datatypes-translation-between-Oracle-and-SQL-Server-part-1.aspx

• SQL Server is down/down?

  VMware dear Experts,

  vCenter Server is installed on a virtual machine and vCenter server database (SQL Server) is installed on one physical server, now SQL Server is broken, then how connect us to our database to solve the problem of vCenter.

  Concerning

  Mr. VMware...

  You have many options:

  1. create a SQL Vm as a replica of the physical server (same IP address, name, etc.)

  a restore SQL DBs in SQL VM

  b - keep the ODBC connection on vCenter exactly the same thing. Gift; t variation of the name.

  c this should get your vCenter to talk on the new SQL Server (vCenter will think it is the same server).

  2 - install SQL Express locally

  the server to which point you a change, but DO NOT CHANGE the name or Description to the ODBC even if it's another name, or you have problems connecting to the DB.

  3-If you have a different SQL server in the environment

  a restore as in option 1

  b change ODBC as option 2

  4. you can also use the Data Migration tool to migrate DB vCenter.

  a - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1021635

• How do I access the Microsoft SQL Server ODBC in Matlab?

  I built a Microsoft SQL Server ODBC data source and tries to connect to the data source Explorer database in Matlab, however, I got this: length of string or buffer invalid [Microsoft] [ODBC Driver Manager].

  

  Anyone know where is the bug?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Customer Web and SQL to vCenter

  I'm caught in a catch 22 and need some advice.

  SQL Server vCenter use is hardware version 10 and setting of the material must be changed through the web client.  We tried adding hot 4 processors to put the server to 8 but then remembered that the OS is Standard and accepts that the 4 processors.  The web client doesn't let me do a hot remove to fall back to 4. So I say to myself, I need to close the virtual machine and then change the processors to 4.

  The problem is that when I stop SQL server vCenters I can't do a lot of things inside the web client - such as see even the material of the box to bring SQL settings changes.  Of course if it wasn't Hardware version 10 I just connect to the host with the Windows Client and make the change.  This is obviously not an option here.

  Does anyone have any suggestions?

  My thoughts only are:

  1. put the Datacenter operating system (which we are allowed to) and let it use 8 CPUs

  2. stop the virtual computer and use converter stand alone to do a V2V and select a lower hardware version that the host can change and then make the changes with the Windows client that is connected to the host.

  Some options are (with the virtual machine off):

  • use VMware Workstation 10 and connect to the ESXi host who currently hosts the SQL Server and change its settings.
  • manually edit the .vmx VM and either reduce the number of vCPUs by setting numvcpus = "4", or add cpuid.coresPerSocket = '2' which should present the 8-processor 4 processors dual-core for OS invited. Do not forget to change manually the .vmx file requires to reload, see VMware KB: reload a vmx file without removing the virtual machine to inventory

  André

• SSO Microsoft Application, SQL Server 2005 & OBIEE 11g

  Dear gurus,
  
  None known how activate SSO(Single Sign On) in OBIEE 11 g, to the East of the platform application microsoft instead of Oracle EBS and the SQL server 2005 data source?
  I'm new on this.
  
  
  Any help will be appreciated
  
  
  Concerning
  
  JOE

  Hello

  Try link below

  http://sranka.WordPress.com/2008/06/06/enabling-SSO-authentication-for-OBIEE/
  http://Gellio.WordPress.com/2009/10/23/enabling-Oracle-single-sign-on-Osso-with-OBIEE/
  OBIEE, OAS, OID or SSO integration
  http://sranka.WordPress.com/2008/06/06/enabling-SSO-authentication-for-OBIEE/
  http://www.addidici.com/blog/?p=8
  http://download.Oracle.com/docs/CD/E12096_01/books/AnyDeploy/AnyDeploySSO3.html

  See the security here, in

  http://download.Oracle.com/docs/CD/E21764_01/bi.1111/e10543/SSO.htm#CEGJJFED

  Hope this helps

  Thank you
  Satya