Migrate from the Labview inspection does not have to acquire the image

Similar Questions

• Can I remotely from a computer that does not have control with LabVIEW?

  Hi, I have a PC at work that has LabVIEW (LV) installed, and I order several machines using a GPIB/USB interface. I would like to be able to control them remotely, at home, so I can start new experiences without having to enter in my lab. However, my PC at home isn't LV what are my options to achieve this?

  The most obvious solution is to use a software that allows me to remotely control the PC of my work, and then do that. However, it would be nice if there is an easy way to interface directly with LV. For example, something where he would create the VI as a Web page, and then I could see it in my browser to home or something. Is there something like this?

  What are my options to control everything from home, without LV on my PC at home?

  If "at work" is a reasonable society, there will be a firewall and it would be difficult to do anything without their approval. Connections to the internal network from external random places are usually blocked for good reasons. Talk to your first COMPUTER service.

  Assuming that you can connect to the remote computer, you can start reading here. Be aware that several modern browser (e.g. Chrome) is no longer support or allow NPAPI plugins, then your choice of browser style are limited.

  A better choice is direct on the remote control. This allows you to fully control the LabVIEW application, start it even if it is not active, loading/saving files, etc.

  I generally use Chrome remote desktop. I can connect to one of my computers from anywhere, even if both computers are located on networks private behind a NAT or firewall. Works great!

• How a 14 bit camera does not have a 16-bit image with IMAQdx?

  Hello

  I use camera firewire Guppy Pro F-031.   And I'm the program with IMAQdx.
  This camera AD converter is 14bits, and I expected that the strokes per pixel of this unit should not exceed 2 ^ 14.  In the attached photo, the maximum number allowed for each pixel is 18132, which is larger than the 2 ^ 14  I am not a 16-bit grayscale output.  How a camera 14bits output 16 bit generally?

  My configuration:
  1 ni-IMAQdx to the Microsoft driver.
  2 VideoMode = "Format 7, Mode 0, 656 x 492".
  PixelFormat = "Mono 16".
  BitsPerPixel = "use the value of the material.
  PixelSignedness = "United Nations signed.
  ShiftPixelBits = "false".
  Auto exposure, Gain, brightness, Gamma is ignored

  Thank you very much!

  best,
  Wen

  IMAQdx do not move or stretch the data AFAIK. Change the boutien and see if that makes a difference.

• I can't create an installer, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  Hi, Shada, this can happen if you include additional installers to your installer for example DAQmx. When you do this the installation program must include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder he updated MAX, so when your Installer try to understand MAX, his request the source where it was installed in your computer in this case Vision Builder.

  Here you can cache information so it is not asked once again, or you can download a version more recent fo DAQmx, then it will update MAX and change the dependecy.

  You can find more details about it in this KB:

  3S88PJMY knowledge base: why do I get an error message 'Missing Distribution' when you try to build an install...

  And to keep a copy, here's more information:

  How to stop missing delivery Notification whenever I build an installer?

  Best regards

• Is there a download from Microsoft which will create a bootable usb media that does not have the drivers?

  Original title: A bootable Windows 7 media

  I work on a Lenovo 2-in-1 with Windows 7 (for games) and 10 (for a normal use) Windows to dual-boot. I created a USB stick with Windows 7 Pro (64 bit) of a legitimate Windows 7 Pro disc. The computer starts on the usb device and plays normally, however, one of the steps asks a driver for cd/dvd and this 2-in-1 (Lenovo Flex 3) doesn't have a built-in CD/DVD. All other drivers are located in a folder system. My question is, given my key Windows 7 can I create a new bootable media that does not demand drivers? Is there a download from Microsoft which will create a bootable usb media that does not have the drivers? I know that I can reinstall the drivers manually after the installation.

  Thank you

  Matt Armshaw

  Windows 7 or Windows 10 come preinstalled?

  If you install Windows 7 on a system that is preinstalled with Windows 10, you must do the following before:

  -Disable the secure boot UEFI

  -Disable the quick start

  -L' install created media can be corrupted.

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

  I suggest that you try to create another bootable copy.

• I bought the Adobe Photoshop CS5 and Lightroom 3 on a CD. However, I now have a 3 Surface Pro who does not have a CD player. Please give me a way for software downloaded from the internet. Thank you.

  I bought the Adobe Photoshop CS5 and Lightroom 3 on a CD. However, I now have a 3 Surface Pro who does not have a CD player. Please give me a way for software downloaded from the internet. Thank you.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  IF Windows 10 read below

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions... said FULL yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• I bought CS5 on a CD for a long time for my windows 7 PC and I now want to put on my new iMac Yosemite that does not have a CD player running. Can I download it from adobe or from the app store and use my original serial number?

  I bought CS5 on a CD for a long time for my windows 7 PC and I now want to put on my new iMac Yosemite that does not have a CD player running. Can I download it from adobe or from the app store and use my original serial number?

  You can use it only on a Win computer. If you had CS6, you could do a platform Exchange but not with CS5. Here are the details of the exchanges of the platform:

  Exchange a product for a different version of the language or platform

• Buttons to blend into the background. Button menu to open does not have a menu.

  Button, button "home" to move forward, back, bookmark this page button, show your bookmarks and open menu buttons are present, but you can not see them. Button menu to open does not have a menu drop-down.

  . Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

  Please report back to see if this helped you!

  Thank you.

• CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• BIOS update failed: the process does not have this system. The process of the utility is not complete.

  I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.

  Here is my BIOS information.

  "Manage 0 x 0031, DMI type 0, 24 bytes.
  BIOS information
  Seller: LENOVO
  Version: JBET54WW (1.19)
  Release date: 06/11/2015
  Address: 0xE0000

  Runtime size: 128 kB
  ROM size: 16384 KB
  Features:
  PCI is supported
  PNP is supported
  BIOS is extensible
  BIOS shadowing is allowed
  Boot from CD is supported
  Selectable boot is supported
  ACPI is supported
  Legacy USB is supported
  BIOS boot specification is supported
  Targeted content distribution is supported
  UEFI is supported
  BIOS version: 1.19
  Firmware revision: 1.2 "

  What could you suggest to get the update disc to recognize my system?

  I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.

  I hope this helps someone stuck in a similar situation.

• When you try to download a game: error "D" drive does not have a sufficient free space to download the game.

  Original title:

  I want to play the game "Hellfire".  My "D" drive does not have a sufficient free space to download the game from drive "D".  How to open a free space to download the game?

  I want to play the computer game Diablo "Hellfire".  When I try to download the game via the "D" drive, I get a message saying that the "D" drive does

  not enough free space to download the game.  How can I get more free space on the disk "D"?
  Hello
   
   
  1. What edition of Windows XP work?
  2. What service pack is installed on the computer?
  3. What happens if you download the game via the c: drive?
  4. The place where you download the game?
  Check if available hard disk space is available as recommended for the game.
  The disk cleanup tool lets you free up space on your hard disk by searching your disk for files that you can safely remove. You can choose to delete some or all of the files.
  You can perform Disk Clean up and then try to re - download the game to see if the problem persists.
  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

   

  Consult the following link as well.
  You receive the error "your computer is running out of memory" message when you start Flight Simulator
  http://support.Microsoft.com/kb/892610
  I hope this helps!

• my computer tells me that (this file does not have a program associated with an association in the Panel options files to perform this action.create)

  my computer tells me that (this file does not have a program associated with to perform this action.create an association in the Panel options files) when I try to click on a link

  Hi rayperkin,
   
  -You are trying to open this link from a Web site or is it an application?
   
  Follow the steps listed in the article given below to resolve this issue:
  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

• I have Windows Vista and was able to SAVE flash from adobe, but it does not open.

  I have Windows Vista and was able to SAVE flash from adobe, but it does not open. Can someone send me a link to a fix. I can't open videos, games or live videos. Someone please help. Should I change my operating system?

  Software Adobe isn't really an option-backup software, you install adobe active X software to enable it. Whatever it is,

  Just go to macromedia.com to install adobe... If she refuses, then your user account is not set as an administrator, to change

  account, disable the parents settings. Macromedia's flash player.

• When itunes download get the error, does not have a valid digital signature that verifies the publication server

  I can not download itunes. I have windows vista.  I get the error message: does not have a valid digital signature that verifies the publication server

  Hi klofcc,

  1. are you able to download and install other applications without any problem?

  2. What is the full error message?

  I suggest that you try the steps from the following links to the article and check if it helps:

  Problem installing iTunes or QuickTime for Windows

  I hope this helps.

• Unable to connect to my profile at the start, the SCREENS ' SAYS the PROFILE SERVICE does NOT have the USER logon

  "Unable to connect to my profile when starting, SCREENS SAYS'THE PROFILE SERVICE does NOT have the USER logon"

  Profile of user could not be added

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile