Migrate MD1000 from direct attach to a MD3000i

Similar Questions

• MSA 2040 Direct attached iSCSI

  We implement a VSphere environment 5.5-3 hosts directly connected to an MSA 2040 with iSCSI.  Attached host to the MSA a question directly or have us use switches?  Our equipment provider said

  "in order for the volumes of VMWare to have access through shared storage needs through a switch. You can run questions where if they are directly attached, then the VMDK on the single host may not be seen or accessible on other hosts (high availability or Vmotion). »

  Also

  "Support from direct attach to the msa via iSCSI is dependent on the BONE."  Some OS support other don't. MSA does not directly connect to Vmware via iSCSI. "

  I talked to HP directly and they claim to direct connection via iSCSI is supported with the MSA 2040 and VMware.

  Is anyone running this configuration that can put my mind at ease?

  Thank you.

  Hello

  Yes, you can use a directly attached MSA 2040.

  I use this configuration yourself by using DAC 10 GB cables, also sold this solution to customers.

  Please note that each host must have 2 connections to the San (if the SAN has two controllers). Each host must have a connection to each controller on the SAN.

  4 directly attached hosts is supported (the controllers have 4 ports on each one).

  Please note that several subnets must be used and configured to allow a correct path discovery. A BIG note to stress also is DO NOT USE the PORT iSCSI MAPPING!

  Be sure to activate the Robin. Please note that you will see an active path perform I/O by the data store (since only one controller has a volume), but in case of rupture of the cable, or controller failure, there are switched to the other controller.

  I use this setup for a few years and I love it!

• install Oracle 12 c and migrate data from 9i to 12 c on Solaris

  HI: this is a primary control to check IAM step by step.  I need to migrate the server Oracle 9i (Solaris) to 12 c (Solaris) to the customer request. I have the instruction of installation YES from the team, the draft plan is:

  1. install Oracle 12 c binary on Solaris Server

  2 exp/imp, method to move data to 12 c 9i.

  Should I create a database "empty" by script until I use the exp/imp method to migrate data from 9i?  Or, is it better to use the option 'create the single database instance' in YES during the installation of 12 c, then exp/imp?  How about the "plug-in database" or the "CBD/PDB' concept to 12 c?  It's still new and I am not master familiar with it, that I have to use all "CBD/PDB' 12 c or not?

  Any problem that I need to know?

  Thank you very much!

  You have your point of disagreement, but it is the best approach of guys Upgrade Oracle, google for Mike Dietrich blogs on updates. And your concern that make upgrades does not allow you to practice, well, you could easily make a few tests on my upgrade on a test environment, I really don't agree with your point here...

  Sorry - but I agree with the ground.

  Anyone who still uses 9i has some questions SERIOUS architecture dealing with totally outside the DB and data. There is just too much features auxiliary available (e.g., ASM, GRID, EM) which did NOT exist in 9i or substantially changed.

  It is also a non-starter, IMHO, not to recommend as an upgrade to 11g without even knowing the 9i version that uses OP. A direct upgrade to 11g is NOT possible since the first versions of 9i. So if such a version uses OP they couldn't make a direct upgrade anyway. They will need first to upgrade to the last version 9i and then level it to 11g. Then, they should adapt to 12 c.

  Then you must take account of the need for BACKUP:

  1. PRIOR to starting to do something

  2. AFTER the upgrade to 9.2.04

  3. AFTER the upgrade to 11 g

  4. AFTER the upgrade to 12 c

  Compare that to the approach of that ground is recommended to use export/import. There is NO need to save the source DB at all since the process will NOT change. Simply a backup after upgrading to 12 c.

• VMware and EMC 5300 Direct attached

  VMWare 5.0 using EMCVNX5300 direct attached SAN.

  I want to install Windows 2008 Virtual Macines that will host the video surveillance system.  Archiving requirements video call flat for up to 10 TB of storage from the video files.

  My question is how best to configure the LUNS on SAN VMFS or RDM?  With VMFS, I would have to introduce several 2 TB LUN and through the Windows Disk Manager to extend the volume.  If I use RDM am still limited to 2 TB virtual disk file?

  I want to keep the simplified system, but I have to take into account the needs of e/s for video archiving for up to 150 HD cameras.

  John McMasters

  UNISYS

  703-595-5228.

  Welceom to the community = with vsphere 5, you can submit more than 2 TB LUN actually up to 64 TB - so I would use RDMs with 10 TB raw LUNS to the virtual machines - note, you will still need a VMFS data store to house the VMDK file pointer that will redirect the r/w on raw LUNS

• HP585 direct attached mirroring of the issue table

  Hi, am new to the forum so forgive me if I am committed any misstep

  We have two servers HP DL585 (amd opteron) with Direct-attached storage bays (attached via a scsi cable), we want to create an environment from virtual machines using ESX 3.5 (this is whats available us - packed) we have also all vmware tools put at our disposal, but no other budget to spend on of NAS\SAN

  Is there a way to create a mirror between the two machines (and tables so to speak) for failover is possible if we're going down or something similar - I think that HP storageworks storage mirroring for this, but nothing to VMware build to do the job?

  We will install the version of ESX on the disks (mirrored) hard local and the slices VM on the array (raid 5)

  You can check with HP. It may be possible to use the MSA70 in any of these two DL585. You may need a few extra bits of a license, but?

• No option to open a PDF from an attachment

  I recently had trouble opening a PDF that has been attached to an e-mail, and while mucking around with it, I tried it opens in Word (which did not help this particular issue anyway).  Unfortunately, now, all my PDFs by email automatically open in Word instead of Acrobat Reader.

  So now, that my question is, how do them automatically open in Acrobat reader directly from the attachment by e-mail instead of Word? For the moment, I have to save them all to my c: drive, then right-click on it and select open with Acrobat Reader 10.  What I want is that they will automatically open in Acrobat Reader 10 rather than having to save their all my c: push first because I have many, many of them in print.  Can someone help me with this please?

  Hello

  Can you try to save any PDF on your local computer (say C:\) and then right-click on the same.

  1. click on the "open with > chose the program.

  2. Select Adobe Reader 10 and make sure you check the box "always use the selected program to open this type of file."

  3. click OK and you should be good to go.

  Hope that does the trick

  Ankit

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

• What is the best strategy to migrate data from Windows to one Mac to another? I use Parallels Desktop to run Windows on my current Mac but want to use Bootcamp on my new.

  What is the best strategy to migrate data from Windows to one Mac to another? I use Parallels Desktop to run Windows on my current Mac but want to use Bootcamp on my new.

  If it is only the data (not apps) I use Dropbox. It turned out to be the best way to move things between the side Mac and the bootcamped Windows of my iMac side. I don't see why it would not work to move data from a virtual machine installation of Win to a BootCamp installation.

• I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost.

  original title: robocopy

  I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost. So far, that's what I did, I used \\server1\share \\server2\share/sec /mir robocopy and robocopy \\server1\share \\serve2\share/e/s /copyall. It seams like they copied all files with the permissions of the user for the files, but not files. For example, if a user makes a folder with the files in the folder appear them have permissions appropriate for them but not the root folder or subfolders, they did... How can I fix this and what is the difference between / s /mir and/e/s /copyall?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Connect FI two directly attach FCoE storage and SAN switches

  Nobody tells me if I can connect FI two directly attach FCoE and SAN storage switches also, as you can see in the diagram of connected network?

  If so, should I FC Switch function Mode? Any concerns should I consider?

  Or the best solution would be appreciated. Thanks in advance.

  The UCS will be in Switch Mode FC, which means that it has a default area.  We cannot make a Zone merge with Brocade because we have no control to set up specific items such as domain and other articles CF IDS that need to be changed when you connect a Cisco FC switch to a Brocade.

  Usually in this situation with a 5 k or a MDS you might be placed in mode of interoperability, which changes the default settings and we will talk to them together - in this case, you can't change these settings, so the only supported configuration is CF Cisco at Cisco.

  See you soon,.

  Greg Scarlett.

• I installed Windows Live Mail and now am trying to migrate mail from my laptop which has been using Vista and Windows Mail.

  I just bought a new desktop computer using Windows 7.  I installed Windows Live Mail and now am trying to migrate mail from my laptop which has been using Vista and Windows Mail.  I need help please.

  The Vista system export your contacts and send to CSV files, then import them into Windows Live Mail.

  Good luck.

• How to migrate code from one environment to another in the MFT 12 c

  Hi all

  How to migrate code from one environment to another in the MFT 12 c.

  Thank you and best regards,

  Tilquin.

  MFT has t2p plugin that can be used to migrate the metadata for production test.

  There is an export option in the transfer page in the MFT UI that can be used to export metadata data transfer.

  This exported zip can be imported in any other environment after making the necessary changes.

• How to migrate data from a source to multiple targets (tables)?

  How to migrate data from a source to multiple targets (tables)? Describe the General steps, please or point me to a tutorial

  Yes, a table in a mapping element can be source and target at the same time (i.e. a target can be reused as a source for the rest of the map on the right side of the table).

  Don't forget to check the order of loading (in the property map), to ensure that the reused as source is loaded before the final table target table.

  I tested it and it works. However, the documentation is not said in the link I gave you above:

  "Each element of data store that has entries but no exits in the logical diagram is considered a target."

  Usually, I tend not to do. I am in favour of a Divide and Conquer approach and try to have my mapping as simple as possible. It is easier to debug and maintain.

• How can I migrate settings from AIcc to 2014 AIcc once I've opened and accidentally refused the offer to migrate my old settings?

  How can I migrate settings from AIcc to 2014 AIcc once I've opened and accidentally refused the offer to migrate my old settings?

  No question. Once the process has converted your prefs, the old stuff has simply disappeared.

  Mylenium

• Need assistance to migrate data from XML to oracle table.

  Hey Odie,

  Im trying to insert data from an xml file into a table.

  My XML file is as follows.

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'yes' ?>

  - < TransferXML >

  < BatchName > HJ69240 < / BatchName >

  < BatchStatus > Park < / BatchStatus >

  - < SubBatch >

  < SubBatchName > UQ80288 < / SubBatchName >

  < SubBatchStatus > project < / SubBatchStatus >

  - < SubBatchDetail >

  < Ingredient > I3308 < / > of theingredient

  < DispensedQty > 0,0 < / DispensedQty >

  < MDispensedQty > 4.0 < / MDispensedQty >

  < / SubBatchDetail >

  - < SubBatchDetail >

  < Ingredient > I3261 < / > of theingredient

  < DispensedQty > 0,0 < / DispensedQty >

  < MDispensedQty > 3.5 < / MDispensedQty >

  < / SubBatchDetail >

  - < SubBatchDetail >

  < Ingredient > I3235 < / > of theingredient

  < DispensedQty > 0,0 < / DispensedQty >

  < MDispensedQty > 0,5 < / MDispensedQty >

  < / SubBatchDetail >

  - < SubBatchDetail >

  < Ingredient > I3142 < / > of theingredient

  < DispensedQty > 0,0 < / DispensedQty >

  < MDispensedQty > 0,2 < / MDispensedQty >

  < / SubBatchDetail >

  </SubBatch>

  - < SubBatch >

  < SubBatchName > ZB97913 < / SubBatchName >

  < SubBatchStatus > incomplete < / SubBatchStatus >

  - < SubBatchDetail >

  < Ingredient > I3309 < / > of theingredient

  < DispensedQty > 0,75 < / DispensedQty >

  < MDispensedQty > 0,0 < / MDispensedQty >

  < / SubBatchDetail >

  - < SubBatchDetail >

  < Ingredient > I3436 < / > of theingredient

  < DispensedQty > 0,0 < / DispensedQty >

  < MDispensedQty > 0,05 < / MDispensedQty >

  < / SubBatchDetail >

  </SubBatch>

  <Final>false</Final>

  < / TransferXML >

  
  

  
  

  With the help of your previous posts I've migrated data from this xml file in a table that works perfectly well. But these data repeats instead of giving 6 lines that his return 12 lines guide please.

  
  

  CREATE TABLE XXBATCH AS

  SELECT A.BatchName, A.BatchStatus, B.SubBatchName, B.SubBatchStatus, C.Ingredient, C.DispensedQty, C.MDispensedQty, A.FINAL

  OF (XMLTable ('/ TransferXML'))

  from xmltype)

  BFILENAME('APPS_DATA_FILE_DIR','HJ69240.) XML')

  nls_charset_id ('AL32UTF8')

  ) COLUMNS

  BatchName VARCHAR2 path (99) "BatchName.

  , Path of the BatchStatus VARCHAR2 (999) "BatchStatus.

  Path VARCHAR2 (99) final 'Final')),

  (XMLTable ('/ TransferXML/SubBatch '))

  from xmltype)

  BFILENAME('APPS_DATA_FILE_DIR','HJ69240.) XML')

  nls_charset_id ('AL32UTF8')

  ) COLUMNS

  Path of SubBatchName VARCHAR2 (99) "SubBatch/SubBatchName".

  , Path of the SubBatchStatus VARCHAR2 (99) "SubBatch/SubBatchStatus".

  (B)

  (XMLTable ('/ TransferXML/SubBatch/SubBatchDetail '))

  from xmltype)

  BFILENAME('APPS_DATA_FILE_DIR','HJ69240.) XML')

  nls_charset_id ('AL32UTF8')

  ) COLUMNS

  Path of the ingredient VARCHAR2 (99) SubBatchDetail/ingredient"."

  , Path of the DispensedQty VARCHAR2 (99) "SubBatchDetail/DispensedQty".

  , Path of the MDispensedQty VARCHAR2 (99) "SubBatchDetail/MDispensedQty".

  (C)

  I didn't test your query, but apparently it's because you have access to the same file three times instead of spend one XMLTable to another correlated nested groups.

  Better, this should work:

  SELECT A.BatchName

  A.BatchStatus

  B.SubBatchName

  B.SubBatchStatus

  C.Ingredient

  C.DispensedQty

  C.MDispensedQty

  A.FINAL

  FROM XMLTable ('/ TransferXML')

  PASSAGE xmltype (bfilename('TEST_DIR','HJ69240.xml'), nls_charset_id ('AL32UTF8'))

  Path of COLUMNS BatchName VARCHAR2 (99) "BatchName.

  , Path of the BatchStatus VARCHAR2 (999) "BatchStatus.

  , Path VARCHAR2 (99) final "Final."

  , Path of XMLTYPE «SubBatch» SubBatchList

  ) AT

  , XMLTable ('/ SubBatch')

  PASSAGE SubBatchList

  Path of COLUMNS SubBatchName VARCHAR2 (99) "SubBatchName".

  , Path of the SubBatchStatus VARCHAR2 (99) "SubBatchStatus".

  , Path of XMLTYPE «SubBatchDetail» SubBatchDetailList

  ) B

  , XMLTable ('/ SubBatchDetail')

  PASSAGE SubBatchDetailList

  Path VARCHAR2 (99) ingredient of COLUMNS "Ingredient."

  , Path of the DispensedQty VARCHAR2 (99) "DispensedQty".

  , Path of the MDispensedQty VARCHAR2 (99) "MDispensedQty".

  ) C

  ;

  Post edited by: odie_63