Min/max to accumulate dasylab peaks? Is this possible?

In collaboration with Dasylab 10. I'm looking to collect peaks min/max on a form of sinwave we will run. Is this possible? If so, how? Or I have to just to oversample and sift through data?

Thank you!

Select this option.

Use the statistics module called Minimum / Maximum.

This will display the value (you choose minimum, maximum or both), or will display a TTL signal, with a peak TTL (5V) to record highs.

Adjust the hysteresis value to avoid detection from noise and spikes, or use a moving average to smooth out the signal.

Tags: NI Products

Similar Questions

min/max with outputs ttl statistics

This is a weird problem. I have attached the worksheet because it is difficult to explain the problem. First of all, let me explain what this thing is supposed to do. A generator of signals outputs sine 5Vp - p, in addition to four. After being added, I use a module of statistics to determine the Min/Max. All I need is the maximum, the minimum is ignored (I'm only looking to the + pics). The + peaks are evaluated to identify uniquely to the final output, which sinewave (s) have been entered in the worksheet. Since I finally need 16 - bit I had to add a scalar unit (scale module) to create the entry 16 (max 15 son allowed an output) by expanding the 15th input to two outputs. I see the expected level of TTL is issued by the module of statistics on three modules Y/t diagram. This tells me that things seem a little work at the exit of the module of SEO (the values of hysteresis in the stat module need to be tweaked to produce all the unique values (16), but it works at least. The problem is that the module of bitmask (set to combine tips - 16-bit conversion for a wide release) generates no output regardless of sinewave different combinations of entry. I thought that I have had set a good example of C.J. provided. I hooked of DMM to also monitor the inputs to the module of bitmask (called 16-bit encoder) - I can't get the digital multimeter to display the output of the module of the stat, but the modules Y/t show the output TTL values there. Both show the modules expected to show which is output, but don't--that intrigues me. The frequency of the sine wave is set to 1,2,4 & 8 Hz for debugging, so I know it is not too fast for the DMM display - I proved this by connecting the sum as an input for the senior DMM sinewave and it displays the voltage changes without problem.

Thus, the two questions are: 1) why the DMM is not working at the release of the Y/t modules or Module Min/Max of Stat? (2) why the bitmask Module cannot evaluate its entries? The added sine wave is continuous and constant phase.

Any help would be appreciated. This has really baffled me, trying to debug.

It dawned on me that the DMM is placed where they will not work because they are supposed to show a too short period of tension. They would appear between 5V and 25V depending on the number of 5V wfm summary, but each TTL output, they try to show are nothing more than the duration milliseconds--not a good application for a DMM. Now, it's just a question of what is the problem with the 16-bit conversion package around!

Any suggestions on the problem?

I have version 29.0.1 and frequently the top right three boxes (min, max, quit) are missing. How should I do?

Since the installation of version 29, I had this problem where the three boxes are missing. It happens sometimes that I start FireFox. I can right-click in the min, max or closing of FireFox and area. I never had the problem before. I have an i7 processor and on Windows 7.

The boxes are not visible (i.e., they show a ToolTip if you hover and work if the click in this area) or whatever should not happen at all?

You can check the problems caused by a corrupt localstore.rdf file.
- http://KB.mozillazine.org/Corrupt_localstore.RDF
You can check for problems with preferences.

Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.
- http://KB.mozillazine.org/Preferences_not_saved
- http://KB.mozillazine.org/Resetting_preferences

FF9 - hide window control buttons in the title bar (min, max, close) with userchrome.css?

I use FF9. I userscript.css hide app titlebar button and orange, but the buttons control window always visible! I can't find the script working.

I don't need min-max-closing button and used to hide if possible without extension.

Here's screenshort:
http://s018.Radikal.ru/i522/1201/50/f6a6ea445507.jpg

If you use the full screen mode and you have these buttons on the Navigation bar, then you should use this code.
```
#window-controls { display:none!important; }
```

Calibration of a filter CPL Positions mini/maxi

Well, then you rotate a CPL filter to vary the amount of filtering. I have never saw one that is marked with the designations showing where the rotation is maximum and minimum filtering. I found a gross way, but apparently very effective, the positioning of the filter very close of the min/max posts filtering. Attach one to your goal and then look in your camera to an LCD flat screen which is powered on, of course, while you turn the filter. My question is simple. What is the best practice, if there is one, for the marking of the mini/maxi positions of your filter? I was tempted to use Nail Polish.

Waddizzle wrote:
Well, then you rotate a CPL filter to vary the amount of filtering. I have never saw one that is marked with the designations showing where the rotation is maximum and minimum filtering. I found a gross way, but apparently very effective, the positioning of the filter very close of the min/max posts filtering. Attach one to your goal and then look in your camera to an LCD flat screen which is powered on, of course, while you turn the filter. My question is simple. What is the best practice, if there is one, for the marking of the mini/maxi positions of your filter? I was tempted to use Nail Polish.

There is no minimum/maximum positions. The degree of polarization of incident light depends on the angle whereat the sun shines on the subject. The best practice is to rotate the filter until the sky is darker sound or it seems bleak for your application. If instead you are photographed a puddle, the ideal position is when you see the correct amount of reflection (or even any) therein. That's really ridiculously simple: what you see is what you get. and if you don't like it, change it.

But the fact that the angle is so big difference means that polarizers do not work very well with wide angle lenses. On one side of the image to the other, the angle can be very different. If the sky can appear half blue and half white.

Yes, some of the laws of physics must be amended or repealed. But this result is probably not in our lives, given the means of partisan political bickering, we're cursed. He must learn to live with things as they are, alas, rather than as we would like them to be.

How AutoSchedule Min Max planning?

Hi all

How Auto Min Max planning calendar?

Thanks in advance.

'Min - max planning report' is a concurrent request under the responsibility of the inventory. You will need to just this simultaneous broadcast to run - no. Restock will create throughout the report while repopulate Yes will create demand for recordings of interface for min - max amounts.

Get the date range min/max for consecutive events.

Hi all...
I am fairly new to the programming of the DB and is working on some examples I picked up a few places. The database version is 10g R2.
I would like to configure the data here and I can explain my requirement.
```
create table table_1
(product_id varchar2(25),
region_id  number,
event_id number
event_date date,
event_status number(1))
/
```
Now the data because it is->
```
insert into table_1 values ('Prod-1',10, null, to_date('01-feb-2014','dd-mon-yyyy'),null)
/
insert into table_1 values('Prod-1',10, 1001, to_date('10-mar-2014','dd-mon-yyyy'), 1)
/
insert into table_1 values('Prod-1',10, 1001, to_date('20-mar-2014','dd-mon-yyyy'), 3)
/
insert into table_1 values('Prod-1',10,1002, to_date('01-apr-2014','dd-mon-yyyy'), 1)
/
insert into table_1 values('Prod-1',10, 1002, to_date('10-apr-2014','dd-mon-yyyy'), 3)
/
commit
/
```
If the table now contains the following data
```
select * from table_1; 
```
PRODUCT_ID REGION_ID EVENT ID EVENT_DAT EVENT_STATUS
------------------------- ---------- -------- --------- ------------
Prod-1 10 1 February 14
Prod-1 10 1001 10 March 14 1
Prod-1 10 1001 20 March 14 3
Prod-1 10 1002 1 April 14 1
Prod-1 10 1002 April 10, 14 3
Now, the condition is as follows:
Above is the dates start and end for the tests on a product in a given region. The event_status column indicates the dates of beginning and end. Event_status = 1, for the date of beginning and the event_status = 3 of the end date.
A new event is now coming from March 21 and ending on March 31.
The power required is a product identifier / region; If there are events that are ending and then count the days, for example, 1001 to end on March 20, but now the new event begins on 21 March... and the new event ends on 31 March and event 1002 begins 01 - Apr... and so on.
The output required for this is as follows:
PRODUCT_ID REGION_ID EVENT_MIN_DATE EVENT_MAX_DATE
------------------------- ---------- -------------- --------------
Prod-1 10 10 14 March 10 April 14
The output should give a product identifier / region, when events are immediately after the other, out the min date of beginning and end of max for all these manifestations of "back to back".
Now I wrote the code for this, but it goes into a purely 'loop' for application in PLSQL... But my head tells me that if the results are correct. the PLSQL implementation is not the most efficient and effective way.
Can someone help me to form the query? I tried to use functions analytical min/max but it gives me the start and end dates back even if my events are not "back to back" or previous/succeed each other... so my query result is not quite correct.
Am reading on the TYPE clause but would be grateful if someone could help me with this query... or any other form better to implement this event so PLSQL can be used. The database version is 10g R2.
Thank you
K
PS - The number of such events back to back is limited to 4 and the events could be created in any order. But if someone could help me with the scenario above; am sure I could make a request addressed to any change in the order. :-)

No this isn't a recursive with clause, perhaps the UNION ALL you got confused. She will work with 10g.

Since there are 2 tables that you said, the block all_data brings together only the lines of the two tables. table_1 start_date and end_date are built from the event_status (where the max in group by).

Min/Max Questions about VCP5?

I passed my VCP4 exam last year and plan the VCP5 next week. I took the who's 5.0 new course so we're ready to go. For all of you who have RECENTLY taken their VCP5 review, I have a few questions:
1. some practice tests and study guides still have a lot of questions min/max and, of course, they do not mention if they are maximum for 4.1, 5.0 or 5.1 - it's really bad try to keep all this directly when the questions are broad. It has spent a lot on my VCP4 exam and it's maddening. So are they min/max on VCP5 issues and what version they relate?
2 - advice on the differences on VCP4 vs VCP5? What categories are more focused on? The examination plan is wide enough for a review more "basic", this is a little crazy.
3 - I found the VCP4 extremely difficult, even after MONTHS of constant study. Good news for VCP5?
Thanks in advance.

(1) Mmin/max questions aren't as much of a focus - you will not get a question asking specifically what min/max but that may be a component of a question - the VCP exam will always carry the recent version - so assume the VCP5 will be 5.1

(2) the review of VCP is NOT a review of base - it is intended to test the range of the VMware product knowledge - so be prepared to meet with anythin that is covered in the action plan.

(3) plan on the VCP5 to be as difficult - the only good news is questions are similar in syntax to the VCP4 so you know what to expect now

Min / Max in the subquery

I'm currently doing tests on Oracle, Postgres and MySQL.
However, Oracle returns me "ORA-00934: Group feature is not allowed here" the same query works with others.

The idea is to return first, Min, Max, last prices for one day on a particular ID.

SELECT
  quotes.id,
  min(quotes.received_time) as opening_time,
  (SELECT ask_price FROM "price_quotes" WHERE id=quotes.id AND received_time >=timestamp'2012-12-10 00:00:00' AND received_time < timestamp'2012-12-11 00:00:00' AND received_time=min(quotes.received_time) ) AS opening_price,
  (SELECT received_time FROM "price_quotes" WHERE received_time >=timestamp'2012-12-10 00:00:00' AND received_time < timestamp'2012-12-11 00:00:00' AND id=quotes.id and ask_price=min(quotes.ask_price) LIMIT 1) as min_price_time,
  min(quotes.ask_price) as min_price,
  max(quotes.received_time) as closing_time, 
  (SELECT ask_price FROM "price_quotes" WHERE id=quotes.id AND received_time >=timestamp'2012-12-10 00:00:00' AND received_time < timestamp'2012-12-11 00:00:00' AND received_time=max(quotes.received_time)) as closing_price,
  (SELECT received_time FROM "price_quotes" WHERE received_time >=timestamp'2012-12-10 00:00:00' AND received_time < timestamp'2012-12-11 00:00:00' AND id=quotes.id and ask_price=max(quotes.ask_price) LIMIT 1) as max_price_time,
  max(quotes.ask_price) as max_price
FROM
  "price_quotes" quotes
WHERE
  quotes.received_time >= timestamp'2012-12-10 00:00:00' and quotes.received_time < timestamp'2012-12-11 00:00:00'
  AND quotes.id = 668792
GROUP BY quotes.id ORDER BY quotes.id ;

I tried to use HAVING and pass the query to the place WHERE but no luck.

This is the Create Table:

CREATE TABLE "price_quotes"
(
   id number(8),
   received_time timestamp, 
   mid_price float, 
   bid_price float,
   ask_price float,
   mid_yield float,
   bid_yield float,
   ask_yield float,
   mid_spread float,
   bid_spread float,
   ask_spread float,
   product_id number(8), 
   product_yield float,
   PRIMARY KEY ( id , received_time )
);

Sample data:

INSERT INTO "price_quotes" VALUES ( 668792, timestamp'2012-12-10 08:00:00', 103, 120, 110, 7, 8, 9, 2.100, 3.050, 4.28999, 29, 1.050);
INSERT INTO "price_quotes" VALUES ( 668792, timestamp'2012-12-10 10:00:00', 99, 98, 100, 4, 2, 3, 0.100, 0.050, 0.28999, 24, 0.050);
INSERT INTO "price_quotes" VALUES ( 668792, timestamp'2012-12-10 16:00:00', 100, 99, 101, 5, 3, 4, 0.200, 0.100, 0.29999, 25, 0.100);
INSERT INTO "price_quotes" VALUES ( 668792, timestamp'2012-12-10 17:00:00', 10, 9, 11, 1, 2, 3, 0.210, 0.330, 0.99, 15, 1.100);

Oracle: 11.2.0.1.0

Published by: 986853 on February 7, 2013 12:23

Hello

986853 wrote:
Thanks for the info, I have edited and corrected the post.

Thank you.
Be sure to post the results desired from these sample data.

This is the Create Table:

CREATE TABLE "price_quotes"
(
id number(8),
received_time timestamp, ...

In Oracle, the names of table in double - quotes are a huge pain.
In addition, if you do not need to register the fractions of a second, use DATEs instead of TIMESTAMPs. They are more effective, and there are a lot more built-in features for dealing with DATEs.
Of course, if you're trying to minimize the differences between the databases, which may influence your decision.

Here are the results you want from the given sample data?

`       OPENING    OPENING  MIN_ CLOSING    CLOSING MAX_PRICE   MAX_
     ID _TIME       _PRICE PRICE _TIME       _PRICE _TIME      PRICE
------- ---------- ------- ----- ---------- ------- ---------- -----
 668792 10-DEC-12      110    11 10-DEC-12       11 10-DEC-12    110
        08.00.00.0               05.00.00.0         08.00.00.0
        00000 AM                 00000 PM           00000 AM

Here's a way to recover them with the FIRST and LAST fucntions aggregate:

SELECT       id
,       MIN (received_time)     AS opening_time
,       MIN (ask_price)
           KEEP (DENSE_RANK FIRST ORDER BY received_time)
                                AS opening_price
,         MIN (ask_price)     AS min_price
,       MAX (received_time)     AS closing_time
,       MIN (ask_price)
           KEEP (DENSE_RANK LAST  ORDER BY received_time)
                                AS closing_price
,       MIN (received_time)
           KEEP (DENSE_RANK LAST  ORDER BY ask_price)
                                AS max_price_time
,       MAX (ask_price)     AS max_price
FROM       price_quotes
WHERE       received_time     >= TIMESTAMP '2012-12-10 00:00:00'
AND       received_time <  TIMESTAMP '2012-12-11 00:00:00'
-- AND        id           = 668792
GROUP BY  id
ORDER BY  id
;

Impossible to get Min, Max and median of the values in the date range values
Hello

I had a requirement as to show the data of each charge group of wise men as '< 100' ' 100-199 "" 200-299 "" 300-399 "400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 '"»

With the query be able to get the count between the beach and the total below. But impossible to get the Min and Max values for this range. For example if the County < 100 is 3 then in these 3, the lowest value is need to display in the min. Idem for Max column also.

In the light of the median value on these values.

Thanks in advance.

Requirement is as below:
State < 100 100-199, 200-299 300-399 400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 Min Total median Max
AK 1 2 0 4 1 4 4 35 35 4 1 $25 $85 850 $1,200
AL 0 0 2 27 10 17 35 2 2 35 0 $103 100-$1 500 750

* "QUERY ' * '"

WITH t AS
(SELECT 'AL' State, 12 DUAL FROM VALUE
UNION ALL
SELECT 'AL' State, 67 FROM DUAL VALUE
UNION ALL
SELECT 'AL' State, 23 FROM DUAL VALUE
UNION ALL
SELECT 'AL' State, 12 DUAL FROM VALUE
UNION ALL
SELECT 'AL' State, 12 DUAL FROM VALUE
UNION ALL
SELECT 'AL' State, 78 FROM DUAL VALUE
UNION ALL
SELECT 'AL' State, 34 FROM DUAL VALUE
UNION ALL
SELECT 'AL' State, 4 DUAL FROM VALUE
UNION ALL
SELECT 'AL' State, 12 DUAL FROM VALUE
UNION ALL
SELECT 'AL' State, 15 VALUE FROM DUAL
UNION ALL
SELECT "AZ" State, FROM DUAL VALUE 6
UNION ALL
SELECT "AZ" State, 123 FROM DUAL VALUE
UNION ALL
SELECT "AZ" State, 123 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 23 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 120 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 456 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 11 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 24 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 34 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 87 DUAL FROM VALUE
UNION ALL
SELECT 'MY' State, 23 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 234 DUAL FROM VALUE
UNION ALL
SELECT 'MY' State, 789 FROM DUAL VALUE
UNION ALL
SELECT "HD" State, VALUE FROM DUAL 54321).
-End of test data
AS T1
(SELECT State,
NVL (COUNT (DECODE (VALUE, 0, 0)), 0) '< 100 ',.
NVL (COUNT (DECODE (VALUE, 1, 1)), 0) '100-199.
NVL (COUNT (DECODE (VALUE, 2, 2)), 0) '200-299.
NVL (COUNT (DECODE (VALUE, 3, 3)), 0) '300-399.
NVL (COUNT (DECODE (VALUE, 4, 4)), 0) '400-499.
NVL (COUNT (DECODE (VALUE, 5, 5)), 0) '500-599,'
NVL (COUNT (DECODE (VALUE, 6, 6)), 0) '600-699.
NVL (COUNT (DECODE (VALUE, 7, 7)), 0) '700-799.
NVL (COUNT (DECODE (VALUE, 8, 8)), 0) '800-899.
NVL (COUNT (DECODE (VALUE, 9, 9)), 0) '900-999. "
NVL (COUNT (DECODE (VALUE, 10, 10)), 0) ' > = 1000.
(SELECT STATE,
CASE
WHAT VALUE < 100 THEN 0
WHAT A VALUE BETWEEN 100 AND 199 THEN 1
WHAT VALUE BETWEEN 200 AND 299, THEN 2
WHAT VALUE BETWEEN 300 AND 399 THEN 3
WHAT VALUE BETWEEN 400 AND 499 THEN 4
WHAT VALUE BETWEEN 500 AND 599 5 THEN
WHAT VALUE BETWEEN 600 AND 699 6 THEN
WHAT VALUE BETWEEN 700 AND 799 THEN 7
WHAT VALUE BETWEEN 800 AND 899 8 THEN
WHAT VALUE FROM 900 TO 999 9 THEN
WHAT VALUE > = 10 THEN 1000
END
VALUE
T)
GROUP BY State)
SELECTION STATE,
"< 100."
"100-199.
"200 299",
"300-399.
"400-499.
'500-599,'
"600-699.
"700-799.
"800-899.
"900-999."
"> = 1000."
'< 100 '.
+ "100-199.
+ "200-299.
+ '300-399.
+ '400-499.
+ "500-599.
+ '600-699.
+ "700-799.
+ "800-899.
+ '900-999 ".
+ ' > = 1000.
in total,.
less ("< 100",)
"100-199.
"200 299",
"300-399.
"400-499.
'500-599,'
"600-699.
"700-799.
"800-899.
"900-999."
("> = 1000 ') min_val,.
largest ("< 100",)
"100-199.
"200 299",
"300-399.
"400-499.
'500-599,'
"600-699.
"700-799.
"800-899.
"900-999."
("> = 1000 ') max_val
FROM t1
/
Why not keep it simple?
```
WITH t AS
(SELECT 'AL' state, 12 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 67 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 23 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 12 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 12 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 78 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 34 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 4 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 12 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 15 VALUE FROM DUAL
UNION ALL
SELECT 'AZ' state, 6 VALUE FROM DUAL
UNION ALL
SELECT 'AZ' state, 123 VALUE FROM DUAL
UNION ALL
SELECT 'AZ' state, 123 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 23 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 120 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 456 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 11 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 24 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 34 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 87 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 23 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 234 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 789 VALUE FROM DUAL
UNION ALL
SELECT 'MH' state, 54321 VALUE FROM DUAL)
SELECT state
     , NVL( COUNT( case when VALUE < 100 then 0 end ), 0 ) "<100"
     , NVL( COUNT( case when VALUE between 100 and 199 then 0 end ), 0 ) "100-199"
     , NVL( COUNT( case when VALUE between 200 and 299 then 0 end ), 0 ) "200-299"
     , NVL( COUNT( case when VALUE between 300 and 399 then 0 end ), 0 ) "300-399"
     , NVL( COUNT( case when VALUE between 400 and 499 then 0 end ), 0 ) "400-499"
     , NVL( COUNT( case when VALUE between 500 and 599 then 0 end ), 0 ) "500-599"
     , NVL( COUNT( case when VALUE between 600 and 699 then 0 end ), 0 ) "600-699"
     , NVL( COUNT( case when VALUE between 700 and 799 then 0 end ), 0 ) "700-799"
     , NVL( COUNT( case when VALUE between 800 and 899 then 0 end ), 0 ) "800-899"
     , NVL( COUNT( case when VALUE between 900 and 999 then 0 end ), 0 ) "900-999"
     , NVL( COUNT( case when VALUE >= 1000 then 0 end ), 0 ) ">=100"
     , count( value ) "total"
     , min( VALUE ) "min"
     , max( VALUE ) "max"
     , avg( VALUE ) "avg"
     , median( value ) "median"
from t
group by state
```

can I set the min/max for several images at once?

I brought in my design of the page of photoshop and I don't want the images or text resize when the browser window is made smaller.
Is there a way to do this without defining every min & max individually?

I answered my own question in the end, I am proposing to the background of the parent

Purpose of the ORDER BY clause in the analytic function Min Max
I was always using analytical functions like Min Max without ORDER BY clause. But today I used with the ORDER BY clause. The results are very different. I would like to know the purpose of the ORDER BY clause in Min, Max and analogues of analytical functions.
user10566312 wrote:
I was always using analytical functions like Min Max without ORDER BY clause. But today I used with the ORDER BY clause. The results are very different. I would like to know the purpose of the ORDER BY clause in Min, Max and analogues of analytical functions.

It is a good point that many developers are not so aware. As far as I understand it the way it works.

Some analytical functions do not need an order by or windowing clause (SUM, COUNT, MIN, etc.). If there is no specified window, then the full score is the window.
As soon as you add a command also add you a windowing clause. This window has the default value of 'rank of~~rows~~ between unbounded preceding and current_row. So as soon as you add an order by clause, you get a sliding window.

Documentation: http://docs.oracle.com/cd/B19306_01/server.102/b14200/functions001.htm

windowing_clause
...
You cannot specify this clause unless you specified the order_by_clause. Window limits defined by the clause RANGE you can not specify only a single expression to the > order_by_clause. Please refer to 'Restrictions on the ORDER BY Clause'.

example of
```
with testdata as (select 10 numval, level lv from dual connect by level < 10)
select lv, numval, sum(numval) over () sum1, sum(numval) over (order by lv) sum2
from testdata;

LV NUMVAL SUM1 SUM2
-- ------ ---- ----
 1     10   90   10
 2     10   90   20
 3     10   90   30
 4     10   90   40
 5     10   90   50
 6     10   90   60
 7     10   90   70
 8     10   90   80
 9     10   90   90 
```
Published by: Sven w. on 25 Sep 2012 16:57 - default behavior has been corrected. Thanks to Chris

Test of VCP-410-min/max 4.1 or 4.0 min/max?

I'm about to take my VCP-410 test this week and I live in the United States. I heard that the test may have 4.1 min/max questions and not 4.1 min/max. Is - how accruate this? What configs should study 4.0 or 4.1? Thank you in advance.
Bob

Hi Bob,

The answer is simple - it makes no difference if you have studied the maximum rates of 4.0 or 4.1, VMware have reviewed each point under consideration for version 4.1, so you get the questions should have the same answer, regardless of the version. For others reading this thread, it is recommended to use the plan of most recent review as a guide and study of the current literature. Good luck

Scott.

-

Min - Max and the planning of Kanban
What are the factors or business cases that should be considered in the choice of planning that we should go?
Any help would be appreciated

My Client is interested in the above 2 methods

Thank you
Mahendra
It of a broad question and is not easy to answer.
One major difference is your philosophy.
Kanban (if properly implemented) is pull based system.
Min - max is always anxious that is it looks at your current onhand, future demand, future supply and then comes up with a purchase requisition.

But there is no hard rule.

Min - max works well when the issue of subinventory is not placed in a compartment. But in a workshop type of situation, you can have an operator goes the CRUDE inventory to get a bucket of screws.
If you ran min - max on the WIP subinventory, he will think that you have a lot and does not generate a purchase requisition.
But another operator may require that these screws and it may be out of them. In this case, a Kanban work better because as soon as the first operator took the last nth bucket, Kanban would have triggered the replenishment process.

Kanban requires you to spend the time to analyze your problems to get to many of bin sizes and locations.

The general rule is that Min - Max is simpler to implement.
Kanban is a bit more complicated. So if your organization is not not mature enough or requires a simpler solution, min - max will work better.

Sandeep Gandhi

Connection pool with the OAS and the optimal value of min/max
Hello world

I have ", works with admin app to implement under oracle application server connection pool. The current value is min = 0, max = unlimited which I think means not implemented connection pool.

Anyway I don't have a lot of information on connection pooling, I searched the forums, but I'm not able to find any useful information.

My Manager would like to know what is the optimal value for min/max for the database, is there a specific formula or a tool that can help me on this issue?

Thanks in advance.
Hello

It's a specific formula or a tool that can help me on this issue?

The value that you specify for the number of connections and connections Min depends on a combination of factors, including the size and configuration of your database server and the type of the SQL operations that
your application runs.

For connection pooling,.
First, check what is the value of 'process' located on the end of DB (for your current value, check v$ resource_limit at the end of db)...
for example if the process is set to "1000", you cannot set the maximum value of the connection pool to the end server application above 1000 it will crash your database.

now on the server side Application.
As a best practice, set the maximum number of open connections and Minimum of connections open to the same value.

For more details on connection pool and its settings.
Check "Setting Up Data Sources - Performance Issues" of the link pdf below

docs.oracle.com/cd/B14099_19/core.1012/b14001.pdf

Hope that it would be useful

Concerning
Fabian

Min/max to accumulate dasylab peaks? Is this possible?

Similar Questions

Maybe you are looking for