Misconfig.exe VISTA

Similar Questions

• Misconfig.exe disappeared completely

  I got this message popup every time my computer starts: sprtcmd.exe .net framework v4.0.30319 when I followed the instructions given to http://support.microsoft.com/kb/929135 the misconfig.exe disappeared completely and is not found on my computer, what should I do?

  Hello
   
  • What exactly are typing you, "msiconfig or msconfig?
  • How long you have been facing this problem?
   
  I suggest to start your computer in safe mode and try to perform the clean boot.
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Tecra A9 tcrdmain.exe Vista Runtime error R6025 pure virtual function call

  At the start of Vista, I get the following runtime error:

  Program c:\program files\toshiba\flashcards\tcrdmain.exe

  + R6025

  + pure virtual function call.

  Concerning

  Friend Nel

  Hello

  I see that this error is due to the flashcards\tcrdmain.exe.
  This flashcard application belongs to the Toshiba Vista Package added value and I think you should try to reinstall this package again.

  First, he must remove the old system VAP. Download the most recent PPV from the European driver Toshiba page, then reinstall it.

  Good luck

• corrupt ntoskrnl.exe Vista configuration problem

  Windows Vista goes into an endless loop of updated Configuration, before he go to step 3, it will stop and restart with the message "Windows is loading files" then it trying to repair for 20 min, + manage to restore the system and return to the login screen. When I look at the log file, it states that the ntoskrnl.exe has been altered.

  I would really appreciate technical assistance to resolve this issue once and for all.  This problem seems to happen every now and then. Initially, I thought it was to do with Norton ISv10, but after the removal of this software, I still have the problem.

  Help please!

  mtang33,
  What version of Windows and level of service pack are you running?

  Take a look at this article as it can help with your problem.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• High utilization of the processor for Taskmgr.exe (Vista)

  My HP laptop with Vista still seem to work at 20-30% cpu usage.
  I have disabled all unnecessary programs, hard drive and network are not accessible, internet security scans are disabled.
  The Task Manager and resource monitor shows what is Taskmgr.exe.  I have the gauge of cpu speed opened the box in the window.
  Memory usage is 50% of 3 GB.
  I have Windows Vista Home Premium Service Pack 2 installed and the operating system is set to do automatic updates.
  Is there a way to stop this use of unnecessary CPU by taskmgr?

  Taskmgr.exe should work only when the Task Manager interface is open.

  Use this alternative to establish what happens when you don't open the Task Manager

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  Based on your knowledge of Windows, you can also use this tool to examine the discussions and the batteries in the process that uses a lot of CPU. This should help you identify the cause.

• Performance with svchost.exe (Vista)

  I am running Windows Vista with 2 GB of RAM... Whenever I boot, the computer works well for a few moments, but performance falls so seriously... I checked the Task Manager and saw that several processes called svchost.exe... They took good 1.5 GB of RAM. What are these and how do I solve this performance problem?

  Hello

  read the information here on 'svchost.exe' and why it is running

  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-svchostexe-and-why-is-it-running/

• Unhandled Win32 exception occurred in spoolsv.exe (Vista)

  I get an intermittent runtime exception in spoolsv.exe.  My guess is that the Service Manager is periodically launching the print spooler and not.  Printing does not work.

  I'm not aware that I recently installed anything that would affect the print spooler (except that my son has been sleeping with Adobe PhotoShop and has recently printed a few very complex docs).

  I have AVG Antivirus running on my system, so I don't think that the problem is malware.

  Any suggestions as to what could be the problem and how to fix it?

  Open the network manager, or control panel.

  Look under the material.

  Click Printers.

  uninstall it then reinstall it.

• Cmd.exe Vista fails to run if users and/or the absent Group Auditors

  Hi all
  In the current context, there is a policy where the files in the % system32% are allowed to be owned by system administrators and. A question arose where after that conversion of these permissions cmd.exe is unable to run. The addition of the user who is currently logged solves this, adding a Group myGroup however with the content user fails.  Also I can give the user (who is an administrator) ownership of cmd.exe and it always fails to run. The command prompt tells me that I don't have permissions that seems odd. Did I miss an edition of registry or is there something else I should be looking for here?

  EDIT:

  Link to the question in the appropriate forum.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/353128fb-E447-41B2-9c1c-6d4260c8b554

  Hello

  I suggest you post this question on the TechNet forum. As would be the best forum for you help with this problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/threads

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Vista - Error Code: 80070002 (cannot install SP1)

  Hello

  I was wondering if someone could help me please?

  I tried to update my Vista Edition Windows Home Premium,

  Processor: AMD Turion (TM) 64 x 2 Mobile Technology TL-50 1.60 GHz

  Memory (RAM): 958 MB

  System type: 32-bit operating system

  and keep facing the same problem over and over again! I followed all the instructions, help and support, and blogs on the internet and nothing!

  Can someone please please help me? I'm desperate!

  Kind regards

  Ed

  - How to obtain the latest Windows Vista service pack

  Please read this first -
  Method 3: Get the latest Windows Vista service pack from Microsoft Download Center

  Download link for Windows Vista Service Pack 1 five language standalone (KB936330) 32-bit

  Once the download is complete, create a folder on the root drive (the drive where Windows is installed on, usually C:\) and name SP1.
  Now move the downloaded, saved, on this file standalone installation package.

  Configure the system to boot
  Now, install SP1 by the right by clicking on the file. Windows6 0-KB936330 - X 86 - wave0.exe (Vista SP1 - 32-bit) and choosing "run as administrator".
  Accept the UAC prompt.
  After the required reboot and installation of SP, Cancel the Clean boot steps and restart in normal Windows mode.

  If you still need assistance in obtaining of Vista SP1 installed - free support for Windows Vista service pack problems

  MowGreen
  Expert in Windows IT Pro - consumer safety

• Error "CD C:/users/Jamie/Desktop/virtual/Virtual CD Manager.exe Manager is not a valid Win32 application".

  Original title: MSG of ERROR for windows.exe, Vista 32-bit operating system

  MSG reads as FOLLOWS: "C: / users/Jamie/Desktop/Virtual CD Manager/Virtual CD Manager.exe is not a valid Win32 application"... What that means?

  Hello jesholder,

  If you try to run a program that is not designed for your version of Windows, you can get this error. Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.

  • If the program is an MS-DOS program more former start program or Windows, you can get this error.

  • If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  I wasn't able to check through the Windows Vista Compatibility Center if Virtual CD Manager is compatible with Windows Vista or not.
  You will need to check with your software vendor to see if it is compatible, or if there is a updated version that will work with Windows Vista.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows XP or other system that the program has been run successfully operating.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Inspiron 1525 Network Controller driver

  My wireless does not work yet. I'm assuming its because the network controller is not installed.

  Anyone know how to install the network driver for Inspiron 1525 Contoller?

  (1) new hard drive

  (2) installed OS's Factory CD

  (3) I followed the order appropriate for the installation of the driver

  (4) I tried the drivers using my Service tag and not the label service (he installed Ethernet but not the network controller)

  (5) I don't see any info information or manufacturer in the sysinfo model, or properties of the control panel

  Only way to possibly identify the card wireless card itself and which is boiled no help either:

  MO: 42015902-04 Rev A03 DW1395CN-OJR356-13740-8B3-00WV-A03
  

  Any suggestions?

  SUCCESSFUL OPERATION:

  I installed these drivers in this order:

  Relocation of Dell DVD, Windows Vista Home Basic 32-BIT SP1

  Windows Vista 32-BIT SP2

  R259999 Dell System Software (DSS)

  R166188. EXE Ricoh chipset

  Intel R166187.exe chipset

  R218148.exe Audio

  R180254. EXE video

  R174292.exe Vista wireless driver (network controller)

  R167854. EXE Ethernet controller

  R286709.exe Touchpad

  Quick adjustment R180762.exe

  R150152.exe Modem

  R147130. EXE Modem Diagnostics

  Just need to applications and security.

  Thanks for being there!

  Most Grateful to natakuc4! your list of drivers and find out the name of the WIRELESS card and then find the Vista driver for it.

  I'm not sure why I had all the trouble, but I think the installation of SP2 or installing the driver before the driver Ethernet Wireless had fixed it.

• ThrustMaster Top Gun Fox 2 Pro do not install under Windows 7 64-bit

  I have a Thrustmaster Top Gun Fox 2 Pro and it will not install in Windows 7 64 bit, Windows reports it cannot find a driver.  The manufacturer says not all newer than Windows XP drivers.

  I thought about it:

  1. Download ftp://ftp.thrustmaster.com/accessories/pc/hotas/exe/HOTASCOUGAR/2007_HCO_VISTA_64_RC1.exe (Vista for their Cougar Joystick driver)
  2. Make a click on the file and choose Run as Vista Sp2 compat mode and run as admin.
  3. Run the installation program and the joystick connection when you are invited (and installed).
  4. End task on the Setup (it is always waiting for the cougar to be plugged).
  5. Enjoy!

• Kodak easyshare will not install a message appears says not compatible

  I can't get my kodak easyshare camera to work on the new computer. message arrives not compatible

  Try right-clicking on the file in question and on the Compatibility tab .exe Vista or XP mode (s).

  See you soon,.
  Jerry

• 36.0 Firefox would be the conduit that allows compatibilitycheck.exe on my Vista 32 bit of Acer laptop? I suspect that either TBird 31.5.0?

  My 32 bit Vista Acer Aspire 4730Z recently suffered from the problem of "compatibilitycheck.exe". See (http://forum.kaspersky.com/lofiversion/index.php/t313939.html) for more information on this problem.

  I repeatedly go to Safe Mode and use the features of BACK delete the incriminated, compatibilitycheck.exe and others in a directory named 'Compatibility checker', which often gave rise to any user account on the PC. I do this with WiFi turned off, IE. no connectivity on the web much more. I reboot with WiFi turned off in normal mode and the PC is lightening fast. However after I have reconnect to WiFi Internet viruses, infections or anything or returns, hogs CPU and brings my Acer to its knees.

  I can watch spawning take place before my eyes in the Windows Task Manager "Processes" where multiple instances appear each CPU grabbing.

  Spin 36.0 FireFox with NoScript 2.6.9.16 and TBird 31.5.0, CLAMWIN AV 098.6 worm is also installed with the current Virus DB always up to date.

  No other browsers are still on my machine except the built in IE which I never touch.

  Might this infection will appear at home through my connections to the web through the Mozilla application

  AM NOW enter INTO THIS QUESTION ON A MACBOOK PRO MacBook seems to be free of problems compatibilitycheck.exe so any "Troubleshooting" Information I send pressing "Share data" IS irrelevant to my PC problems.

  rawellman1216 said

  My 32 bit Vista Acer Aspire 4730Z recently suffered from the problem of "compatibilitycheck.exe". See (http://forum.kaspersky.com/lofiversion/index.php/t313939.html) for more information on this problem.

  I repeatedly go to Safe Mode and use the features of BACK delete the incriminated, compatibilitycheck.exe and others in a directory named 'Compatibility checker', which often gave rise to any user account on the PC. I do this with WiFi turned off, IE. no connectivity on the web much more. I reboot with WiFi turned off in normal mode and the PC is lightening fast. However after I have reconnect to WiFi Internet viruses, infections or anything or returns, hogs CPU and brings my Acer to its knees.

  I can watch spawning take place before my eyes in the Windows Task Manager "Processes" where multiple instances appear each CPU grabbing.

  Spin 36.0 FireFox with NoScript 2.6.9.16 and TBird 31.5.0, CLAMWIN AV 098.6 worm is also installed with the current Virus DB always up to date.

  No other browsers are still on my machine except the built in IE which I never touch.

  Might this infection will appear at home through my connections to the web through the Mozilla application

  AM NOW enter INTO THIS QUESTION ON A MACBOOK PRO MacBook seems to be free of problems compatibilitycheck.exe so any "Troubleshooting" Information I send pressing "Share data" IS irrelevant to my PC problems.

  Downloaded suggested Malware removal tool msert.exe. Performed a full scan which found and removed a Trojan horse and an adware malware program. Unfortunately, I inadvertently closed the details of the report that calls the two offending programs so I can't go to the list of their names in this response. Can someone tell me where msert.exe reports are stored? If so I will list them in this forum as part of a response to this topic.

• Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers.

  Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire

  Try to download from this site:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html