Error "CD C:/users/Jamie/Desktop/virtual/Virtual CD Manager.exe Manager is not a valid Win32 application".

Similar Questions

• "Error loading C:\Users\Owner\Appdata\Roaming\KBDKYR9.dll KBDKYR9.dll is not a valid Win32 Application" message at startup.

  Original title: error kbdkyr9.dll

  I get this error code when I start my computer on the desktop a box appears and says

  Error loading C:\Users\Owner\Appdata\Roaming\KBDKYR9.dll

  KBDKYR9.dll is not a valid Win32 Application

  Can someone help me with this please?  Also, I tried to download a fix cleaner and it did nothing... I still have it.

  Nicole

  Hi Nicole,.

  1. what changes have been made to your computer before this error message?

  Follow these steps and check if the problem persists.

  Step 1:

  I suggest you put your computer in a clean boot State.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you can go ahead and disable or uninstall the same.

   
  Note: Put your computer in normal mode by following step 7 of the hyperlink after you identify the third-party application that caused the problem to occur

  Step 2:

  It can also be caused by a virus, I wish that you run a full scan of the PC using your updated security software or a scanner using the Microsoft Safety Scanner.

• Error loading C:\Users\Bo\AppData\Local\ukohixowe.dll is not a valid Win32 application

  Original title: ukohixowe.dll

  I have the following error message appears whenever I start Windows Vista:

  Error loading C:\Users\Bo\AppData\Local\ukohixowe.dll
  C:\Users\Bo\AppData\Local\ukohixowe.dll is not a valid Win32 application.
  In addition to the error message when my PC goes into mode 'sleep' & the monitor turns off, I am unable to wake up the screen saver.
  What is this error and how to fix it & the problem of monitor

  Hi Adrien,.

  According to the description, it seems that you are having problems with the startup error message and the computer doesn't wake up from its sleep.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 3 of the article mentioned above.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: For the question about the computer is not waking from sleep, you may read the following article and check.

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

   

  http://support.Microsoft.com/kb/930091

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Just DL ITunes and can not be opened. Error message says "Not a valid Win32 Application"

  Please help me. It took HOURS to dl iTunes and now I can not open. Am error message appears and says "C:\Users\Stephanie\Downloads\iTuneSetup.exe".

  is not a valid Win32 application ".

  Thanks :)

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Cannot install the FSX SP1: C:\Users\Home\Downloads\fsx_sp1_ENU.exe is not a valid Win32 application

  I want to install SP1 for FSX, but it says this

  (C:\Users\Home\Downloads\fsx_sp1_ENU.exe is not a valid Win32 application)

  What should I do to install it?

  Hi JohnKegaly,

  You can try the steps in the KB article and check below if you can install the FSX SP1.

  Games: Error Message: not a Win32 Application invalid

  http://support.Microsoft.com/kb/315589

  Note: This also applies to Windows 7.

  See the link to download the FSX SP1:

  FSX SP1 English

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a0437942-e3dc-4aa7-85dc-90aae2f0409e&displaylang=en

  Hope this information is useful.

• RunDLL error message: "Werconcpl.dll is not a valid Win32 application" keeps reappearing

  Hello

  I have a Windows 8 operating system and about 2 weeks, I've loaded my computer and an error titled, "RunDLL" appears indicating:

  "There was a problem starting.

  C:\Windows\system32\WerConCpl.dll

  C:\Windows\system32\WerConCpl.dll is not a valid Win32 application. »

  This error message is always popping up to date.

  More information:

  -Another error will appear again once every 30 seconds or so, no matter if I press OK to close. That said, if I left my computer alone for long periods, fifty, maybe even a hundred of these messages would pile on my desk.

  -Many sources I've found seem to point to the idea that the cause of this is a process, probably malware, is set to run this WerConCpl.dll file at startup.  I have not all antivirus programs before that happened. But shortly after that, I installed Malwarebytes and I performed complete tests on Windows Defender and Malwarebytes. Initially, there are some questions that Malwarebytes had found and quarantined, but nothing on Windows Defender. I also tried to clean with a program of free registry: CCleaner. None of them were able to resolve the problem.

  -I then went to my task manager to start Services. I disabled some third-party services that I use, but it is not necessary to start. Other than that, I have not found all third-party programs that are strange or unusual. The rest were associated with my internet (wide com) and bluetooth devices, or Microsoft and Intel.

  -J' tried the solution that others used by running the command line as administrator and in typing "sfc/scannow". However, this does not work, and this error in the following line: "could not Windows Resource Protection start the repair service".

  -I can't do a system restore because I had already done the restore points, which was a bad idea on my part. However, system restore services have problems with the shadow copy of Volume and not more time to work in any case.

  * At the same time where this problem occurred, when looking for the solution to this problem, I found that a number of other things had stopped working on this laptop. I will not list all of them because it's a fairly large list, but this include services such as the Windows Installer Service, Windows Update services, and Windows store. I could do separate posts for all these but I feel like the root of these problems is related to this key error message.

  * If this can help, at his request, I could type in a list of all service issues and error messages associated with them. In general, they can be irrelevant to the topic of this post.

  Thanks for reading this,

  Samxratts

  Hi Sam,

  First of all, I want to thank you for providing the detailed information about this.

  In this scenario, I would suggest trying the following methods and check if it works for you.

  Method 1:

  Start safe mode and check if the same problem persists. If the issue is not still in Mode without failure, then place the computer in a clean boot state and check which program third party/app is causing this problem.

  Step 1: Safe boot mode.

  See the following article from Microsoft Help to start safe mode.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Step 2: put the computer in a clean boot state in order to determine what third party/PPP program is causing this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:

  Create a new user account and check if it helps. This is to check if the problem is caused due to any user profile related issues or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  Please reply with the status of the issue so that we can better help you.

• Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers.

  Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire

  Try to download from this site:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• In the face of error "%1 is not a valid Win32 application. (0x800700C1)"in windows server 2012 R2 while running the windows schedule

  Dear team,

  In the planning of windows since windows machine run R2 server 2012 am facing the following error.

  "%1 is not a valid Win32 application. (0x800700C1).

  We have set up the automatic backup for our Desigo insightV5.1SP2 application calendar.

  Thanks for supporting.

  Regarding

  Athi

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• error msg "mcafee.exe is not a valid Win32 application". Why? How to fix?

  How can error msg "mcafee.exe is not a valid Win32 application" I solve?

  Hello

  ·         You are able to install other applications?

  I suggest you to contact McAfee technical support and check out:

  http://service.McAfee.com/TechSupportHome.aspx?LC=1033&SG=TS

  Alternatively, you can try to install the latest Microsoft Security essential and check if it helps.

  Microsoft Security Essentials is free and designed to be simple to install and easy to use. It works quietly and efficiently in the background if you do not have to worry about interruptions or perform updates.

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

• TurboTax cd installation problem... Error message States "D:\setup.exe is not a valid Win32 application"... What is the solution to allow me to install my TurboTax program?

  Error message States "D:\setup.exe is not a valid Win32 application"... What is the solution to allow me to install my TurboTax program?

  Maybe a cd damaged?

  Hello

  ·         What is the service pack installed on your computer?

  There are changes that the CD is damaged. You can copy the file to install it on the computer and then try to install the application, and check.

  To install TurboTax, the condition of basic system for Windows is:

  Minimum system requirements

  Processor: 1 GHz 32-bit (x 86) or faster processor

  Operating systems:

  Windows XP (32-bit) Home edition or professional with Service Pack 3 or higher; or

  Windows Vista (32 - bit and 64 - bit) Home Basic/Home Premium/Professional/ultimate; or

  Windows 7 (32-bit and 64-bit).

  Administrator rights required to install and use TurboTax.

  RAM: 512 MB RAM (1 GB recommended)

  Hard drive space *.

  * Must be on the same drive that TurboTax is installed on

  ·         Federal products: 500 MB for TurboTax (plus up to 1.5 GB for Microsoft .NET 4 if not already installed)

  ·         Products from the States: 15 MB

  ·         Federal more State products: 515 MB for TurboTax (plus up to 1.5 GB for Microsoft .NET 4 if not already installed)

  Reader of CD-ROM: 2 X CD-ROM drive

  Monitor: recommended 800 × 600 resolution (1024 × 768) screen

  Internet access (required):

  Modem 56 Kbps (connection broadband recommended)

  Other software:

  ·         Microsoft .NET 4 (included with TurboTax Installer)

  ·         Adobe Reader 8 +.

  Printer: Windows compatible ink jet or laser printer

  Hope this information is useful.

• "I tried to load a Turbo Tax 2011 program and and the error message came up to the top -" D; "-is not a valid win32 application".

  "I tried to load a Turbo Tax 2011 program and and the error message came up to the top -" D; "-is not a valid win32 application".  In D, I got the TurboTax 2011 loading program. Can you help me fix this problem? E-mail address is removed from the privacy *.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install/win-32-file-missingwindows-xp/ee455a05-8e32-4353-9ab6-656f2cbd222d

  Pete,

  If you right-click "My computer" and select 'Properties', under the general tab, you should see your version of Windows XP... That said your current pack service is?

• try to install windows live gives the error: [2] wlsetup-web .exe is not a valid Win32 application

  Help! get this message when I try to download windows live

  Does anyone know how to fix this, so that I can download windows live.  This is the error message I get.  C:\Documents and Settings\Beverly\local Settings\Temporary Internet Files\Content.IES\Z2VARPB8\wlsetup-web[2].exe is not a valid Win32 application.

  Hello
   
  1. are you able to download and install other programs?
  2. what browser do you use?
   
  Remove all files in the Temporary Internet Files folder and try to re - upload and check.
  C:\Documents and Settings\Beverly\local Settings\Temporary Internet Files\
   
  Also delete temporary internet files from the browser.
  Delete temporary Internet files
  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-temporary-Internet-files (this section applies to internet explore 7 & 8)

  Contact team for software issues with windows live windows live support.

• error code while trying to open the photos include JPEG and BMP files: C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  I withdrew just a very good old scanner which apparently couldn't handle the recent installation of Windows XP Service Pack 2 or 3, and went with a rather nice Epson V330 Photo.   I uninstalled all old software, want my images to JPEG and BMP to open in Adobe PhotoShop Elements 8 for editing and development.  It is my job and my hobby and means of photography technique.  I reinstalled the scanner by removing the Arcsoft software with which it has been furnished, which is not really suitable for what I do.

  Now, I can not open JPEG in PhotoShop Elements 8.0 and here I get the error message:

  C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  It seems to have something to do with the hack with the folder options after that I spilled the Arcsoft as any kind of primary program.

  BUT I have to open JPEG files, and it MUST be in PhotoShop Elements 8, I bought.  I can see, overview and could open to the limited capacity of some of the ArcSoft stuff, but I'm not interested in distance using that.

  How can I get these files/folders to open in something useful?  I was able to create JPEG on the new scanner, but now my computer opens not those or 'old' of my files.   See the warning message.

  I'm trying to uninstall all the software now and do not reinstall the stuff of Arcsoft, which would not be useful for me in any setting.   But I do not think that this will be the solution, as my computer can not open these key files in PhotoShop Elements 8.0.

  I think it's something I did during the passage, but I did system restore and NO RESULT.  NONE!

  If you open a directory of photos and go to the thumbnail view in Explorer, they display the thumbnails correctly?
   
  I think that you need to reset the file association for programs that open the image files.  Try a right-click on a jpeg file and go to properties and click on the button to edit, and then designate PS elements 8 as the top program open with, and then see if it works very well.
   
  You can also check the settings in the registry for the types of image files.  Seewww.oehelp.com/noimg.aspx , which deals with a related issue.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I withdrew just a very good old scanner which apparently couldn't handle the recent installation of Windows XP Service Pack 2 or 3, and went with a rather nice Epson V330 Photo.   I uninstalled all old software, want my images to JPEG and BMP to open in Adobe PhotoShop Elements 8 for editing and development.  It is my job and my hobby and means of photography technique.  I reinstalled the scanner by removing the Arcsoft software with which it has been furnished, which is not really suitable for what I do.

  Now, I can not open JPEG in PhotoShop Elements 8.0 and here I get the error message:

  C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  It seems to have something to do with the hack with the folder options after that I spilled the Arcsoft as any kind of primary program.

  BUT I have to open JPEG files, and it MUST be in PhotoShop Elements 8, I bought.  I can see, overview and could open to the limited capacity of some of the ArcSoft stuff, but I'm not interested in distance using that.

  How can I get these files/folders to open in something useful?  I was able to create JPEG on the new scanner, but now my computer opens not those or 'old' of my files.   See the warning message.

  I'm trying to uninstall all the software now and do not reinstall the stuff of Arcsoft, which would not be useful for me in any setting.   But I do not think that this will be the solution, as my computer can not open these key files in PhotoShop Elements 8.0.

  I think it's something I did during the passage, but I did system restore and NO RESULT.  NONE!

• Files by saying: "not a valid win32 application, error 19" in Vista

  I have a problem with my computer allowing me to open the files, saying they are not a valid win32 application, also I do not be able to update my computer... in my device drivers is teredo tunneling pseudo-interface is saying that it cannot open the file because it configuration in the registry information is incomplete or damaged...

  * original title - invalid win32 application / / error 19 on install *.

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

  Mick Murphy - Microsoft partner

• Error message received: File\content. IES\XRUUQGC\file[1].exe is not a valid win32 application

  As he tried to improve the overall performance of the laptop of my daughter, I received the following message when I try to download security/antivirus software: File\content C:\User\Haley\AppData\Local\Microsoft\Windows\TemporaryInternet (2ndLine) (1stLine). IES\XRUUQGC\file[1].exe is not a valid win32 application

  It's a Dell Studio laptop running Vista.

  Does anyone know what this message and what I need to do to fix?

  Thank you in advance for your help! Darlene

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

  Currently, this is a good combination that seems to detect more malware, but it can miss the malware as all security software can do.