Missing computer watch ux32w.dll

Similar Questions

• Missing or corrupt HAL.dll

  Hi all

  I'm working on a laptop (toshiba satellite) that does not start and displays the message "Windows could not start because of the following problem - the following files are missing or corrupt - hal.dll.

  I tried to start form a XP disk and it hangs where it says, "Starting Windows" so I can't repair or the recovery console option. I ran as a result of power mau who said he replaced the boot with the new files and tried all the other recovery options. I still get the same message at startup. I then ran a Kaspersky Antivirus iso to cd rom and he said there were three viruses, but when I tried to rename or delete, it says that they were write-protected and could not be removed.

  I was starting to think that maybe the hard drive was dead, but would not be Windows Installer or iso Kaspersky told me that?

  Running out of ideas here and any help would be greatly appreciated!

  Thank you

  Mark

  Hi mzinn,

  Follow the steps in the link below and check if it helps start the computer: "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer: http://support.microsoft.com/kb/330184

  See also: error message: "Windows did not start because of a configuration of the disk of the computer problem":http://support.microsoft.com/kb/314477

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the error with the game F1 2011 as 5773 ordinal is missing from the xlive.dll

  Original title: xlive.dll questions

  When I try to open f1 2011, it appears a mistake calls "5773 ordinal is missing from the xlive.dll.

  Hello

  Xlive.dll is actually in the 'Games Live' package installer. I suggest that you try to download the Xlive.dll file from the following link and check if the file missing the problem persists.

  http://go.Microsoft.com/fwlink/?LinkId=128962

  (a) download the package

  (b) right click on the package and choose 'run as administrator '.

  (c) install the application, and then restart the computer.

  (d) try to run the game and check if the problem persists.

  Hope the information is useful.

• How can I solve miss me TCMSVR. DLL on a TECRA S1 Windows XP

  How can I solve miss me TCMSVR. DLL on a TECRA S1 Windows XP
  Christian

  Please check this topic on the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16564

  Maybe it helps, but it seems that it s a part of the Toshiba drivers or file that is missing.

• Captivate 6 errors: Missing file libwinpthread - 1.dll and the Application could not start correctly (0xc000007b) under Windows 2008 R2

  Hello

  I have a problem with Captivate 6 installation on Windows Server 2008 R2. I have 2 different scenarios where I tested it, but the result is the same.

  1. I used AMEE (Application Manager Enterprise 3.1) to create the installation of the deployment via SCCM 2012 Package.

  Note that the current package works fine on Windows 7 (x 86 and x 64), but not on 2008 R2 error after I tried to launch the Captivate.exe application.

  The error indicates that there is a missing file: libwinpthread - 1.dll and if I copy and made a recording of the present. DLL file then he sends another error saying: on-demand failed to start correctly (0xc000007b) so he won't ever let me launch the application.

  2 now, if I install the package directly from the Original sources (CD) without creating any package AMEE after completing the installation, I have always the same error about the missing DLL file.

  Is there a fix or workaround to install 6 Captivate on Win2008 R2?

  Thanks in advance and greetings.

  This seems to be a generic question unrelated to Captivate. Here is a site that lists the possible causes.

  How to fix Libwinpthread - 1.dll is missing / not found error

  I don't know if their solution works well.

  Anthony

• Missing or corrupt hal.dll file. Computer will not start in XP

  All of a sudden my computer does not open in XP.  Says it has a corrupt or missing hal.dll file I don't ' have a Windows XP CD.  What I can to correct without losing what is on the computer?  Must have been an update last night, because it was working fine before.

  The usual problem with this message is not the hal.dll file is missing or corrupted - it usually just means that XP cannot find it to be abandoned because the file system has somehow got corrupted something like a power interruption, restart or abnormal termination... or your c:\boot.ini file is somehow corrupted (or both!).

  You will have to start on something to fix.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (This includes the plug pulling, power buttons, remove the battery, etc.).

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Then, you perform a chkdsk/r from the XP Recovery first Console and report back how it works (which may be all you need to do):

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• system32\hal.dll. missing. computer will not start. Help, please. I don't have an xp cd. XP is installed on the hard drive

  Hello
  My laptop is not at all start. It is just coming up with the error message "windows root>\system32\hal.dll. missing. Please reinstall a copy of the above file.
  Everything I can find on the web so far tells me to reinstall via an XP CD. My version of xp was preinstalled, because it's a computer dell laptop.
  Can someone help me?

  Hello
  Please take a look at this article and follow the steps in troubleshooting bottom of the page.

  http://support.Microsoft.com/kb/314477

  I hope this helps. Just reply to the results.

• get message that programs somne cannot start because mfc ioou.dll missing computer froim

  to message that certain programs may not start because mfc100u.dll is absent from the computer how to solve

  Hello

  -Did you do changes on the computer before this problem?

  I suggest that you want to run the auditor of file system (CFS) analyze and check if this solves the problem.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:
  (a) click Startand type cmd in the box start the search.
  (b) programs right click on cmd in the list, and then click run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  (c) at the command prompt, the following line and press on ENTRY:
  sfc/scannow
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?
  http://support.Microsoft.com/kb/929833
   

  Hope this information helps.

• P7-1414 OFFICE: MISSING FILE (MSVBVM50. (DLL)

  MY COMPUTER IS A FILE MISSING (MSVBVM50. (DLL), HOW I CAN GET IT.

  Hello

  You can install the files to run vb from the Microsoft Download Center at the following link.

  http://download.Microsoft.com/download/vb50pro/Utility/1/Win98/en-US/msvbvm50.exe

  Kind regards

  DP - K

• Cannot start the computer (error hal.dll)

  Hi, I use Windows xp and when it loads, it says:
  Windows could not start because the following file is missing or corrupt:
  \System32\hal.dll
  Please reinstall a copy of the top of the queue.

  I have the original Windows xp cd and when I boot from the cd the blue screen comes up saying "Windows Setup".
  It automatically start doing something and then he stuck to "ACPI Plug & Play bus driver. Stucks HE there for a while and when it ends, I got an error message that says: "file acpi.sys cause unexpected error (32768) to 5964 in d:\xpsprtm\base\boot\setup\setup.c line."

  And when I press any button it just restarts the computer and it makes a loop in this way.
  And by the way, safe mode and all the other modes do not work, I get the same error for hal.dll, and I can't reach the office.

  Help, please!

  UPDATE: this time I received the error "acpi.sys file caused...". "now, I got that it's corrupted.

  It is extremely unlikely that the hal.dll file is missing or damaged.

  It is extremely likely that XP just cannot find the file.

  I have no idea what you have tried so far things - have you tried to do a repair installation?

  For this error, I first start in the XP Recovery Console (by pressing 'R' of your bootable CD) and run chkdsk /r on your system and then see how things appear after that, but try this notice from the Support Engineer and see how it works.

  If you can't get into the Recovery Console any CD you or you are not sure what type of bootable media you have, you should make a bootable CD from the Console of the Recovery XP (no XP media required) and do not forget what you have.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Help start the old computer system32/hal.dll error not installed bugs not working-

  I want to transfer files from your old computer to new computer with Vista Easy Transfer.  In an attempt to start former computer, received the system32\hal.dll error.  I followed the instructions to fix proglem reboot, press / hold down f8, etc., but that has not worked.  I could reinstall the operating system Microsoft Windows XP Professional, including Service Pack 1. But if I do then I lose all files, documents, photos, everything from the old computer... at least, I think it's going to happen.  Can you tell me what are my options to ensure that I don't lose any of my data.

  This behavior can occur if one or some of the following conditions are true:

  By default in the [Boot Loader] section of the Boot.ini file is missing or invalid.

  Windows XP is not installed in the location specified in the Boot.ini file.

  The Ntoskrnl.exe file is missing or damaged.

  The path of partition in the Boot.ini file is not set correctly.

  General failure.

  The article below should help you solve this problem.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  You must have a Windows XP installation disk to perform the steps listed in the article above.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 'Connect to' missing error and van.dll

  A few days ago I noticed that I could not access "to connect to a network" and when I went to 'connect to' in the start menu, I got a message saying "error loading van.dll van.dll is not a valid win32 application."  I looked on forums to try to find a way to solve the problem, I did a disk check, a restoration of the system, I tried to replace the van.dll file.  Nothing seemed to help.  Now, 'connect to' disappeared from my Start menu and it will not appear as an option when I try to make the properties > start menu > customize to get it back, and I can not even access "connect to a network" of my notification area.  Does anyone have an idea what I can do?

  Hello

  Were there any changes made on the computer before the show?

  I suggest you check out the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Let us know if it helps.

• System - missing MSVCP110 error. DLL file prevents the opening of Photoshop CS6

  Yesterday (30/10/13) I worked in Photoshop without problem.  This morning (31/10/13), I tried to open Photoshop to continue work on a project.  Photoshop does not open and I got a message saying system error: "could not start the program as MSVCP110.» DLL is missing from your computer. Try to install the program to fix this problem.

  After several attempts involving unistalling and reinstalling, I was still without an executable program.

  I went online with Adobe support chat for almost 2 hours and went through various unsuccessful fluctuations and finally was told by the tech puisne transfer me a product specialist.

  https://sales.liveperson.net/hc/57472748/?cmd=file & file = chatStart & site = 57472748 & sessionkey = H8405217410984866447 - K 3872409822685877058, 8890457 & postChatURL=.

  Bottom line, I have bounced off the cat and was never transferred.  I'm still without a programme of work.  Someone at - it suggestions?

  I just find the solution to this problem.  It focuses on the add-on collection for Photoshop Nik.  Apparently Google updated last night and many people have experienced the same thing I have.  I deleted the Nik collection and was immediately able to open PS CS6.  I intend to reinstall the Collection Nik once Google has a difficulty.

• Missing BabSolution\Shared\NTRedirect.dll

  When I start I have a mess Rundll compo missing net BabSolution\Shared\NTRedirect.dll how to solve this problem or find the missing dll.  I am very new to this and everyone wants money money money to solve this problem

  Please follow the instructions in this guide and in the future be more careful with the things you like installing programs... always choose custom installation and uncheck everything added luggage.
  PUPPY. Optional.Babsolution.A removal Guide | malwareremovalguides

• file missing or corrupt dbghlp.dll

  try to install new software and I get the above message.  so taking into account the solution that try to re install program can solve problem. problem is that he never let program install first.

  How can I fix it.

  Hello

  ·         What software are you trying to install on the system?

  ·         Apart from this program, you are able to install any other program on the system without any problems?

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system?

  ·         What is the exact error message?

  Dbghelp.dll is a module that contains functions used for the symbol engine and module enumeration. The dbghelp library is available as part of the debugging tools for Windows, that helps in the process of finding and reducing the number of bugs and glitches in a computer program

  I suggest to do a SFC (System File checker) scan on the system and check if the problem is resolved. Follow the steps mentioned in the article below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.