Missing drivers after the upgrade of dc7800e to win 8.1

Similar Questions

• Missing drivers after the upgrade to Windows 7 Ultimate

  I upgraded my HP Pavilion dv4 5113 Windows Home Premium from Windows Ultimate edition. I can't the following drivers for my machine upgraded. His works well but the yellow marks when you open computer, management and Management is boring please help.

  Controller Serial Bus (USB)

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1836103C & REV_04

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1836103C

  PCI\VEN_8086 & DEV_1E31 & CC_0C0330

  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1836103C & REV_06

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1836103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1836103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1836103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FF00

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1836103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1836103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1836103C & REV_04

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1836103C

  PCI\VEN_8086 & DEV_1E22 & CC_0C0500

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  Unknown device

  ACPI\HPQ0004 * HPQ0004

  Thank you in advance.

  Hello

  Download and install the following:

  Intel Chipset driver.

  After this Setup is complete, restart the laptop.

  Then, download:

  Intel USB 3.0 driver.

  Realtek LAN Driver.

  Realtek card reader driver.

  Intel MEI driver.

  HP ProtectSmart.

  Kind regards

  DP - K

• Missing graphics drivers after the upgrade to Windows 8?

  Hey guys,.

  I see several people on the forums of the problems with graphics drivers not installed after the upgrade to Windows 8.

  The first step you want to take, make sure that the laptop is supported by Windows 8.

  You can go HERE and see if your laptop has been tested for Windows 8. If she's GREAT!

  Now, if you're still looking for the graphics drivers according to the processor you have there are several places to look.

  First of all, you want to check the HP website and your product type # in the next selection > and then select the operating system > click Next > and look under the section that says "Driver - Graphic" and start the download.

  If you still don't see the driver referred to in this article, you can see one of these sites according to what processor you have.

  INTEL

  AMD

  Also, if you have Windows 7, you can still follow this post.

  THX

  I hope it's useful!

  THX

• Satellite A500 - missing programs after the upgrade to Windows 7

  Hello

  I have the Satellite A500 - 134.
  When I was upgrading from Windows Vista to Windows 7, I had to remove some programs as Advisor on upgrade mentioned.
  Now I'm bored of these programs after installing Windows 7:
  # Toshiba Tempro
  # Toshiba ConfigFree
  # Toshiba Disc Creator

  In addition, the 'FN' key no longer (it worked on Vista), so I can't activate a feature when I press FN + (some F # buttons as F2).

  So, what can I do about it?

  Hello

  Have you used the kit to upgrade from Windows 7 home Toshiba? This kit also contains a utility that should be used to reason the installation process and mentioned in manual.

  Anyway, you can get tools on the Toshiba page now:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  The FN keys to install Toshiba Value added Package.

• missing River after the upgrade to windows 7

  Hi, I just updated level of windows Vista to windows 7 on my hp compaq 6910p and miss me the drivers for the pci and serial port pci simple communication controller, if I could be provided a link for the drivers who would be nice thank you

  This is the ID that I learned to find those

  PCI serial port

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C1103C & REV_0C
  
  PCI communications controller

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C1103C & REV_0C

  Download and install the Intel AMT driver in here.

  Restart the system.

• After the upgrade from vista to win 7 can install vista on another system?

  I have an older system which will be an upgrade of vista, can I use my vista software and the key for the upgrade of the old system because I upgraded vista to win 7?

  If you have used the license system / operating of Vista as part of the Windows 7 upgrade process: No.

  You cannot use your Vista license anywhere else if it is part of the Windows 7 upgrade process.

  See you soon...

  .

  Mick Murphy - Microsoft partner

• Make sure you get all your drivers after the upgrade of your operating system

  I've seen a lot of post lately in which users try to upgrade their operating systems (Vista-> Windows 7 or Windows 7-> Windows 8).  Often the hardest part of this upgrade is to make sure that you get all of the available drivers and software in order to use the material.

  You can always download software and drivers for your laptop computer manually by visiting the HP support Web page and search for your laptop in the product number.  This document shows you how to locate the number for your product.
  
  However, the best way to download and install the software for your laptop is to use HP Support Assistant.  This application comes pre-installed on most computers but portable consumer is likely to be absent after a clean install or upgrade the operating system.  It will search all the drivers and other software that can use your laptop as well as updating existing drivers/software.

  I hope that you will find useful information.  Have a great day!

• Partition missing Bootcamp after the upgrade to EL CAPITAN

  Hello

  Finally decided to upgrade MAVERICKS to EL CAPITAN.

  Unfortunately, I was not checking the compatibility of Bootcamp with Windows 7 running on it.

  After upgrade, only the OSX partition is visible (hold ALT key at startup).

  The boot partition on board still shows the Bootcamp partition, but I can't find/start with that.

  Read a few threads, it seems that EL CAPITAN using a BIOS that is more recent (EFI?) and Bootcamp + Win7 would require always old BIOS (MBR?)?

  I decided to use a Timecapsule backup back the MAVERICKS - which worked well.

  However, the Bootcamp partition is always considered to be NON-BOOTABLE.

  Now I'm out of ideas.

  Can someone help me so that I can start over the Windows, upgrade to Win10 image and finish the job?

  Thank you

  TC

  I also have the same problem - here to see the result

• Presario sr2030nx need drivers after the upgrade to windows 7 ultimate 64 bit

  Presario sr2030nx had xp media center edition, I've updated to win 7ultimate 64 bit. my dvd player says he has a few drivers disabled

  There was a pop up on all drivers must be signed, as an unknown device is lack of both pilots.

  Please help me find a solution, thank you.

  That particual error happens because of pilot missing generally regarded as 'Away Mode Driver'

  Here's what I copied THIS post

  Explanation I understand
  
  AMD away mode is a measure of the implementation of some energy-saving AMD processors. It is a measure not very well known and the reason the PC is slowly put one out of State a device at the same time leaving a PC race that looks like it is off. Not a very good idea!
  Drivers were provided by a card mother manufacturers were also built in Vista, they are not provided with Windows 7 x 64 and as I already mentioned Gigabyte.
  No no not this driver does not affect the performance of the PC

• Missing dashboard after the upgrade to el capitan

  I just upgraded to OS Capitan and now my dashboard is absent.  The hot corner doesn't work.  the other active corners work.  I have them turned off and reset them, all the correct things are made, but the dashboard with the weather, calculator, gizmo of conversion bugs are all gone.

  Have you tried with 3 fingers kick right on Trackpad?

• back from Maxx audio missing software after the upgrade of OS, where I can get it?

  I use dell 5447 it came with maxx pro audio I suppose, which will display in the audio application of dell. Now, there is no application audio dell and or audio maxx, I can't find it in my dell for specific system support page. Is someone can you please tell me where I can get this software from.

  Go to Inspiron 14 5447 assistance page. Use the blue 'Change OS' button to select your operating system - Windows 10.

  

  Then, expand the Audio category and get the driver from Realtek which is there.

• Drivers for USB audio devices do not detect my Casio keybaord (piano) after the upgrade to Intel core i5

  I have windows XP with SP2.

  Device drivers audio USB is unable to detect my Casio keybaord (piano) after the upgrade to Intel core i5. Usually, when I connect my keyboard via USB, the drivers used to get automatically installed. But now he is unable to install the drivers and still shows the yellow "?" symbol. I tried everything but nothing seems to work. Someone please help. :-(

  If you update your motherboard, you must install the drivers available from your mobo site and not from winupdate

• After the upgrade to Vista SP2, about 8 GB of space is missing? I run diskcleanup. Y at - it something like windows7 "clean system files" for Vista?

  After the upgrade to vista sp2, about 8 GB of sbace is missing? I run diskcleanup. Y at - it something like windows7 "clean system files" for Vista?

  Hello

  see if this program helps you to determine what is take up space

  http://www.Jam-software.com/treesize_personal/

  by default system restore will have up to 15% of the capacity of the hard disk

  you would like to reduce this amount

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

  also use disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

  • Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

  • System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.

  also scan for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  and read these information from microsoft on windows optimization

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Install the missing drivers after cleaning to Windows 7 from XP

  Hello. I have a custom computer I upgraded from xp to Windows 7 Home Premium. Everything worked perfectly before the upgrade. After the upgrade, my multimedia card, PCI, has stopped working and The Geek Squad, nor the built-in convenience store could find the drivers for it. It says "code OxC004C008 and 28 for the NTativrv01". then another message said: "PCI simple communications controller - no driver; then "Mlti-media conroller does not have a pilot.  appreciate any help I can get. Thank you

  1 a helpful to take before step same you've solved these problems is to create two alternative accounts protected by password Admin-level.

  • Accounts of users & their safety are taken much more seriously in Windows 7 so the tricks we learned under XP can not help us any more.
  • [No matter what account can suffer from corruption of the profiles user and if it's your main account and you have no spare Admin account to access the system, then you have a serious problem that we are not even allowed to advise you in this forum other than to suggest a complete reinstall of Windows 7].
  • If you have these two alternative accounts then, because they are rarely used, they are less likely to suffer from the corruption that is in use.
  • So even if you have problems in your account you can then log in as one of them and solve the problem.
  • You must write the passwords and ensure the safety of the sheet of paper.  You could do 'Password' reset disks instead, but they are not more effective than a piece of paper and they will also have to be stored somewhere in the place safe.

  2. did you run the Windows 7 compatibility checker before the upgrade?  You can start now and its results will always help you.  See Windows 7, 8.1, 10 compatibility tests for Windows XP, Vista - WiKi

  3 then see where to find the hardware drivers to treat your problems with your multimedia controller etc.

  4 once you get these things sorted, then you want to probably ensure that you get a Windows 10 forced update before you're ready - see disable Windows 10 improvement and ignore someone who starts to tell disable you updates specific Windows or turn off Windows update itself because it's all nonsense.

  5 like many of us when we arrived first of XP, you reach not used 'images of the system' which is worth doing as soon as you have a system worth preserving - so you probably want to turn it off until you have fixed your problem with drivers hardware.

  • You can make an image of the system in less than half an hour.
  • You can restore an image system in less than half an hour and thus replace problems based on software, including problems of drivers, who have appeared on your computer.
  • Search for create a system image using Windows to get an introduction to & use,
  • Then go into Control Panel, [view by - small icons, if necessary], Backup & Restore for the link on the left side to create a system image to run the utility.
  • Note that you should not make the system repair disc which will find references to your Windows 7 installation disc can do what a system repair disc can [etc.].
  • Target the most convenient & reliable to record images of system on is an external hard drive.  An image of the system does not have the external hard drive to any target, so it can also be used for other purposes such as the storage of your current file backups.
  • Rewritable DVD is not as reliable and you need several whenever you made a new image.
  • Utility of third to party system images can be better that the built-in Windows utility I use Acronis TI which has a very good reputation.  Macrium Reflect free edition also has a good reputation.  But you can start with the built-in utility, and then you worry about the alternatives later.

  All the best,

  Denis

• CVD reference is missing the installation of Windows 7 Image option in MIrage Client after the upgrade to 5.0 Mirage

  Prior to the release and the Mirage 5.0 upgrade, I had a CVD of reference created. I did 5 revisions to the Base layer on the MCV Ref. After each change, I clic click straight on Mirage Client icon, select Tools and then run "Installation of Image of Windows 7. Then I go back to the Console and capture a layer of existing base of CVD Ref. has worked like a charm.

  Since the upgrade to Mirage 5.0 and after the installation of the new client on the MCV Ref, the installation of Windows 7 Image tool is missing. If I try to capture the base in any case layer, it crashes. I checked the logs and he returns with "Execution dock could not be completed" and never captures the base layer.

  I have uninstalled/reinstalled the client on the MCV Ref.

  I have removed the Ref CVD of inventory and created again.

  Still cannot capture the base layer.

  The next thing im going to do is flatten the CVD Ref and available with a base previous output layer and see what happens.

  BTW, this happens on two Ref CVD I created. for example a team lead Ref CVD and another is a Call Center Ref CVD.

  any ideas?

  The only way I could get my MCV reference existing (before Mirage 5.0 upgrade), to capture a Base Layer (after changing new) without having to rebuild my reference Image from zero has been to Sysprep the machine and capture with WDS. I removed the Mirage customer before sysprepping. Then deleted the CVD the stock updated Ref waiting and then I rejected the device pending and removed from CVDs rejected.

  Then was to bring the return of WDS Sysprep image and install the Mirage Client and create a new MCV Ref. I made a few changes and was able to capture the base instantly layer. I will now do the same for the rest of my pre Mirage 5.0 Ref CVDs. I had 3 Ref CVD anyway. If they were not complex images, I would of just them rebuilt from scratch.

  I'm happy to finish with WDS, so much easier to make changes to the images on Mirage.

  Hope this helps someone else with the same number of "Execution of Shim failed to Complete" when revisions to images on Ref CVD after the upgrade to the Mirage Server 5.0