Missing entry in Windows components

Similar Questions

• I am trying to install Windows XP and during the process, a message appears with the title "RUNDLL__Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.

  I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
  "Error in iesetup.dll Missing entry: IEAccessSysInst.  The process then stops and I cannot make progress.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• Missing windows components in the administrator group policy templates. XP Pro SP3

  Miss me some of the windows components in the computer configuration > Group Policy administrative templates. How can I get back them? XP Pro SP3

  If you click on administrative templates, add or remove templates do you have right to have these models:

  CONF
  Inetres
  System
  Wmplayer
  sooper

  If this isn't the case, you must add them as described above.

  For example, if inetres does not appear in the models (so, you must add), you won't see any substance IE under Windows Components.

  Take a look at templates that are installed on the system that works and compare them to the distressed system.

• some files are missing (like network, Control Panel, systems, windows components) under administrative group policy template kindly help me on this

  some files are missing (like network, Control Panel, systems, windows components) under administrative group policy template kindly help me on this

  In the Group Policy Editor, right-click on administrative templates, add/remove templates.

  Usually, you would see:

  CONF
  Inetres
  System
  Wmplayer
  sooper

  If some are missing, add them as follows:

  Click Add and it will open a folder where you can add the missing elements to match the list back in, or to match the list on a system that works correctly.

  Restart to make sure that the changes stick.

  Each component has a history, you can Google for more information.

  Here is a good starting point:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;816662

• Missing entry time.dll C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\DLCC: RunDLLEntry

  whenever I start my computer, this massage is coming:

  Missing entry time.dll C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\DLCC: RunDLLEntry

  What is this for?  Can I do anything about it?

  Thank you

  Roya

  What make and model of printer you have?

  It could be virus/malware related butI I think this may just be caused by the drivers of your printer,

  Make sure your machine is pest free, run a MalwareBytes scan on your computer: http://www.malwarebytes.org/

  If the machine comes out clean reinstall your printer drivers.

  John

• I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: RunDLLEntry It just started and I have not installed anything new.

  I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: lack of entry: RunDLLEntry It just started and I have not installed anything new.

  Hello Lscherr,

  Thank you for your message.  To clarify, you are able to print out your design program?  You can try to perform a clean boot and printing of your design program.  A clean boot will start your computer without any 3rd party applications, you can then start your design software and test the printing functionality.  If you are able to print, the problem may be caused by another application of part 3.  Click HERE for instructions to boot.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Add/Remove windows components, wrong, error 002

  Original title: Add/Remove windows components, does not open

  error message to see system of addministrator error 002

  Hello

  1 are logged as an administrator of the computer?
  2. have you made changes on the computer recently?

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756

  Method 1.
  a. click on start then run and type "regedit" and press "enter."
  b. navigate to the following key:

  HKEY_CURRENT_USER\Control s-1-5-21-3095785160-4041922383-2734342379-1008 ' t load

  In the right pane, delete any values whose data value
  'no '.

  c. close regedit and restart the computer and check.

  Method 2.
  To resolve this issue, add the missing registry entries:
  a. Click Start and then click Run.
  (b) in the Open box, type cmd and press ENTER.
  (c) in the command window, type regsvr32 mshtml.dll, and then press ENTER.
  d. click OK to confirm that the registry entry has been added.
  e. in the command window, type regsvr32 shdocvw.dll - i, then press ENTER.
  f. click OK to confirm that the registry entry has been added.
  g. in the command window, type regsvr32 shell32.dll - i, then press ENTER.
  h. click OK to confirm that the registry entry has been added.
  i. close the command window.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error in DLCtime.dll missing entry RunDLLEntry

  Recently, whenever I boot, I get this message:

  Error in C:\Windows\System32\spool\DRIVERS\W32X86\3\DLCJtime.dll

  Missing entry: RunDLLEntry

  My equipment

  Dell Latitude E6500

  Windows XP Professional with SP3 all up-to-date

  Please I need a STEP BY STEP answer to solve this problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error/c86a5bcb-8df2-4B63-BD99-365db7ca98df

• When I turn on my computer, I get a warning that says missing entry: entry Rundll.

  When I turn on my computer, I get a warning that says missing entry: entry Rundll. What is c? What should I do?

  Hello

  You did changes to the computer before the show?

  Method 1:
  Step 1: Check if the problem occurs in safe mode:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  Step 2: If the problem does not occur in safe mode, and then perform a clean boot and check:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 2:
  Run the sfc scan and check if there are any file system corruption.
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 3:
  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• DLCGtime.dll missing entry: RunDLL error.

  Whenever I start the system give me a missing entry DLCGtime.dll: RunDLL error.   How to fix this?

  Hello
  
  1. have you done any change in software on the computer lately?
   
  Method 1.
  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747
   
  Method 2.
  I also suspect that it is a virus and I highly recommend to run a Virus Scan online.
   
  Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
   
  b. run the malware removal tool from Microsoft.
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
   
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
  I would also recommend to install the free security software from Microsoft. Which is easy to install and automatically updated
  Here is the link to download.
  http://www.Microsoft.com/securepc
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I download a fxscfgwz.dll missing in my windows\system directory?

  This missing dll (fxscfgwz.dll) is mandatory for the Member States to install and integrate "Fax Service" - in the Control Panel / Add / Remove Windows components... my XP Home Edition SP3 software...

  PML...

  Thanks for your suggestions - in the end I was able to re - run the sw FaxServices set up to look into another folder

• Cannot open Add/Remove windows components.

  received message after trying to open Add/Remove windows

  components,

  Msdtcstp.dll Setup library could not be loaded, or function OcEntry could not be found.

  Contact your system administrator. The specific error code is 0x7e.

  Using Add/Remove programs and Add/Remove Windows components, you see this message:
  Msdtcstp.dll library installation could not be loaded, the function that ocentry could not be found.
  Contact your system administrator.  The specific error code is 0x7e.
  Msdtcstp.dll file is missing or damaged, your system path variable is incorrect, or your system is afflicted with malicious software (or all of the above).
  Using Windows Explorer, navigate and see if the file is present.
  Msdtcstp.dll file must be in this folder:
  c:\windows\system32\setup
  Since this is one of the 3498 files which is covered by the Windows File Protection, if ever it has been installed and works, it must never be 'disappeared' unless something is wrong, but you can just go ahead and replace it with a known good copy and then work on potential problems.
  You can search your system to get copies of msdtcstp.dll and copy to the appropriate folder to replace the missing or suspicious file.  You must replace the file if it is missing, or overwrite the file afflicted, if it's suspicious.
  There should be a copy msdtcstp.dll file in this folder:
  c:\Windows\System32\dllcache
  Just copy c:\windows\system32\dllcache\msdtcstp.dll and paste it into the c:\windows\system32\setup folder to replace.
  Answered in the affirmative if invited to replace the existing file.
  Test your system now.
  If you can not find the file and have a bootable installation CD authentic XP installed and that the CD-ROM is drive X, expand the file from the CD-ROM i386 folder in your c:\windows\system32\setup folder by entering this command from a command prompt window:
  Expand x:\i386\msdtcstp.dl_ c:\windows\system32\setup\msdtcstp.dll
  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been expanded.
  Test your system now.
  Please report your results.
  Your system may also be affected by malware, so follow your resolution with this:
  Download, install, update and do a full scan with these malware free
  detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  The scans by operating clean, then to solve any problems.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• missing entry

  whenever I start a small box appears saying missing entry: RunDLLEntry
  C:\WINDOWS\System32\spool\DRIVERS\W32x86\3\DLCJtime.dll

  reply in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/f6171376-b2a9-4498-8c1b-d3db1ebb2fe0

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Missing entry system 32

  whenever I start a small box appears saying missing entry: RunDLLEntry
  C:\WINDOWS\System32\spool\DRIVERS\W32x86\3\DLCJtime.dll

  Hello

  DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer then re - install
  pilots. If you no longer use the printer and then subsequently properly, delete the printer.  Also
  Contact the Dell Support and forums for known problems.

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  How to uninstall a printer from your Windows based computer
  http://www.ehow.com/how_2299771_uninstall-printer-from-Windows-based.html

  Dell drivers
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/

  =================================================

  If necessary use to remove the error.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Up to version 6.22 of entry and other components HTML texts have been with a width. Now, after installing version 7. The entries have increased in size not more about before defined sizes... You can fix this?

  Up to version 6.22 of entry and other components HTML texts have been with a width. Now, after installing version 7. The entries have increased in size not more about before defined sizes... You can fix this?

  I think it's about the size, just differently than before. See the discussion in:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=691157