Missing EXIF data in the folder "Images".

Similar Questions

• Where the photos are normally stored on a Mac computer? In the folder images in the Finder on my Mac, I see a file called "Library.photoslibrary Photos" i.e. 28.52 GB but I also have about 160 other image files in the same folder. But in pictures,.

  Where the photos are normally stored on a Mac computer? In the folder images in the Finder on my Mac, I have a file named "Library.photoslibrary Photos" i.e. 28.52 gb and another folder called 'iPhoto Library.migratedphotolibrary' i.e. 4.95 GB, but then I have also on the 160 other photo and video files in the same folder. But in my Photos app, it says that I have 6 260 'elements '.

  The pictures that you have imported into the photo library are, by default, stored inside the package (not file) "Library.photoslibrary Photos" in your pictures folder. The 'iPhoto Library.migratedphotolibrary' package would contain photos that have been stored in your library, iPhoto at the time of the migration.

  The other files in the pictures folder are that: other files. Also, they can be in libraries if you imported and has not deleted the copies lying around in the images.

• The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive.

  Original title: USB problem

  I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?

  Hello

  Start Windows Explorer, and then see if there is a drive letter assigned for access to the
  drive. If this is not the case, check if the disc is shown in disk management.

  1. Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. In the left pane, under storage, click Disk Management.

  If there has made a right click option - assign a drive letter for you can use Windows
  Explorer to copy files.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Moved the folder "Pictures" of Mac and catalog image files shows no images. Cannot navigate to the appropriate folder in 'Files' Panel and cannot rename the folder "Images". How can I reconnect catalog image files?

  Moved the folder "Pictures" of Mac and catalog image files shows no images. Cannot navigate to the appropriate folder in 'Files' Panel and cannot rename the folder "Images". How can I reconnect catalog image files?

  You opened an empty catalog.

  You can try the following two steps to open the appropriate catalog file.

  1. Use the file-> open recent, open the list of all catalogs
  2. If this does not work, you will need to find the appropriate help for your operating system catalog file and double-click it to open it.

• Change the name of the folder 'Images' output before its publication?

  Hi, is it possible to change the name of the 'images' folder that contains all of the images involved in the project before I publish the project?

  As far as I can tell, if I change the name of the folder "images" of a project which has been published, it will not pull up one of the images in the future. (when I saw in a browser, etc.).

  If there was a way to change the name of this loan account, it would help and ensure our pull images from the correct folders.

  Thanks - Scott.

  http://forums.Adobe.com/message/5077476#5077476

• Missing old messages in the folder / let's go to the balls

  I have a Macbook Pro running OSX 10.10.5 Yosemite. I have my e-mail Application set up for my Gmail account. I'm Secretary of an association and I have a lot of emails with each year having its own folder/mailbox. All my emails before July 10, 2015 are missing.

  On the left side of the 'Mail' in the top window, it lists the "Boxes" under the present is, Inbox, sent, etc. There are "Smart mailbox store" I have none there "on my Mac" - zero, then "Gmail", then in Gmail is a long list of folders/mailboxes where I store my messages.  All my emails in these folders before July 19, 2015 are missing.

  I tried to rebuild each and nothing happened.

  I tried to use Time Machine and it has either crashed or all my mailboxes are empty, including my "Inbox".  What he says "click on restore to recover"Mailbox""or select another box in the letters or special message to recover"but nothing is displayed.» If I click on restore and I now I have Mail, "on my Mac" "Time Machine" and the box the letters, but of course, it's like Time Machine showed - empty - no messages.

  When I looked at 'Today', in Time Machine, the mailboxes are empty and he is saying the same thing.

  It seems that I have 2 problems, where is my old mail, and why are the empty mailbox in Time Machine? I used Time Machine into the past to retrieve messages, new Yosemite?

  When I added some new folders/boxes to letters, I used the sign + downstairs, I noticed that I could also go up to the Menu bar and select "Mailbox" "New mailbox", then a list where I wanted to add it.

  If my mailboxes appear as "on my Mac" instead of under 'Gmail '?

  I can access all my old emails on my web Gmail account, should I stop using the ' Mail? I wanted them backed up with Time Machine, but it does not either.

  Thank you

  Cindy Boyd

  You said that you can access your old emails on gmail Web site. Your also set records highlight on the gmail website? If so, this means that folders that you speak as lost were never on my Mac. Seems they were IMAP mailboxes. They should have been in the gmail account in the sidebar. Place the cursor on the name of the gmail account and click on view to extend the account if it is hidden.

  You can also hover over on my Mac & smart mailboxes, and the click to show those as if hidden.

• 'Application data' should the folder there be 21 of them?

  I had some problems with the installation of a game. I did some searching via Windows Explorer and found in the folder "ProgramData" 21 copies of the Application Data folder. Each one inside the other. This cannot be normal. What can cause this and how do I get rid of all these files?

  Right-click of your drive in my computer, choose Properties - tools - and choose
  Check now

  --
  ..
  --
  "stickbow" wrote in message news: 0f859ac8-70b8-4cb6-b973-e7188a4adbad...
  > I had a few problems with the installation of a game. I was part
  > the search through Windows Explorer and are found in the folder
  > "ProgramData" 21 copies of the Application Data folder. Each interior
  > the other. This cannot be normal. What can cause this and how
  > get rid of all these files?

• Images do not show in the folder "images" by default.

  Service ads requires that I have pictures in the main directory with html and js files not in the default ' images' folder. It's easy to do, but the images do not appear when I preview the banner. Why? Is one knows how to fix this?

  Hello

  Just to let you know, please use. / (point-bar oblique) for assets location for images published next to the file of the canvas and the appropriate in the JS file references.

  BTW, we are working on a UI to make this option available in the settings dialog box of publication for the upcoming version.

  Thank you!

  Mohan

• Imported images no longer go to the folder "Images" on my Mac.

  Since I started using Lightroom 5 (version 7) when I import pictures from my card or the camera, they no longer go to my folder 'Images' on the hard drive, but rather in "all my files.  I'm doing something wrong?  Thanks for any help.

  Is there a subfolder called Lightroom or a subfolder called images in the images folder? More than likely nothing. When you click on the input of images in the sidebar you will then need to open, click on this other folder subfolder.

  When you read the information which is the exact full path.

• EXIF data in the image RAW Canon: about timing

  In Photoshop CS 6 ex (cloud creative), when I open a Canon T3i DSLR RAW image it does not give the time that the photo was taken at the second, at the minute.  In my old Photoshop CS 3, raw images from Canon are identified at the second.

  For my work, I need to know the time when the image was shot at the second.

  Am I missing a setting or something?

  Thanks in advance for any help on this matter.

  Thomas

  I was able to solve this problem.

  I use Mac Mac OS; snow leopard and mountain lion.

  Soultion:

  In Mac OS: Click the date and time in the menu bar. Then go to 'open language and text... '. "in the box. Then go to the "Region" or "Formats" depending on your operating system. Click on "Times" and customize the settings for your own needs.

  This allows up to milliseconds for the Canon RAW EXIF time.

  Thomas

• Can I restore the folder "Images" at an earlier date?

  I save my photos on a disc when my computer crashed. As I had apparently cut instead of copy some files were lost. Is it possible that I can restore from an earlier date (such as the restoration of the system) and get my photos that I've lost the return? Please, I beg you.

  Corrie

  I save my photos on a disc when my computer crashed. As I had apparently cut instead of copy some files were lost. Is it possible that I can restore from an earlier date (such as the restoration of the system) and get my photos that I've lost the return? Please, I beg you.

  Corrie

  System Restore does not back up your files.  This is for system files.
   
  Backups are for your files.
   
  If you access hard disk where they were stored until you move elsewhere - you might be able to use something like "Recuva" to obtain a portion of the back.

• Default printer in the folder images in Vista Ultimate

  I tried to understand why the PICTURES folder using my FAX printer by default when I always set my default system for the normal printer printer.  How can I see what the printer PHOTOS folders options are to choose a default printer?

  Hi daveshrader,

  Thank you for using answers Forum.

  If I read your post correctly, your printer is the default device and working properly.
  You just want to know why Fax is listed first when printing?

  Do you have a fax device connected to the computer?
  Do you use it with a fax? Do you use efax?
  If your printer is set as default, it should appear in the selection box.

  I suggest to perform a clean boot to see if some startup programs may conflict with the printer.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click Start collapse this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  c. under the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OK and then click restart .

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK , and then click restart .

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start to reduce this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click the Normal startup option, and then click OK .

  When you are prompted to restart the computer, click restart .

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Open the folder "Images" = Windows Explorer has stopped working.

  Everytime I try to open my pictures folder after a few seconds, I get the message that Windows Explorer has stopped working. I can't understand how to solve this problem. = (If you please help.

  I ran the System File Checker and there find and repair corrupt files. However, the problem is still there.

  I also ran the disk check and has not helped either.

  Ok. I solved the problem by seeking advice in another thread. Here's what I did:

  I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).

  I'm moving all my pictures from external storage. Guess that's the motivation that I needed to finally get the prints and albums. :) I hope this helps someone else.

  Hello

  You can download this reg from my SkyDrive file:

  http://CID-128fc518635be2dc.SkyDrive.live.com/self.aspx/.public/Ms%20Foren/registry/WER%5E_Explorer.reg

  and double click on the file to import.

  When the Windows Explorer crashes, Windows Error Reporting Service [1] creates a dmp under C:\Localdumps. Please download the file to your public Skydrive folder [2] and post the link here. I take a look at the discharge with the debugger, maybe that I can see what Shell extension is the cause.

  André

  [1] http://msdn.microsoft.com/en-us/library/bb787181%28VS.85%29.aspx
  [2] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I'm doing an Animation of edge works on a CMS. I used "AdobeEdge.loadComposition" to find the. JS file, but it's looking for the images in the folder "/ images". I would store the images somewhere else. Please help me get there.

  Here is the code:

  " < script type =" text/javascript"charset ="utf - 8"src =" http://animate.Adobe.com/runtime/5.0.1/edge.5.0.1.min.js "> < / script > .

  < style >

  .edgeLoad-EDGE-4084323 {visibility: hidden ;}}

  < / style

  < script >

  AdobeEdge.loadComposition ('/ media/products/edge_script /', 'EDGE-4084323', {})

  scaleToFit: 'none',

  centerStage: "none."

  minW: "0."

  maxW: "undefined."

  Width: "361px."

  height: '268px.

  }, {« dom » : {}}, {« dom » : {}}) ;

  < /script >

  < div align = "center" >

  < div id = 'Stage' class = "EDGE-4084323" >

  < / div >

  < / div >

  Thank you for your help.

  Ahhhhhh, okay. Including this one after more digging.

  Here is the answer from another post. I hope this helps someone!

  If you specify an absolute url of file, or you extract content from a server that does not host the content, you can manually update the _edge.js file to specify the directory:

  (function ($, edge, compId) {})

  image folder

  IM var =' images//';

  Just be wary if you re - publish files, you will have to redo any custom changes.  I do it for the projects off-server and it works fine as long as you make all changes in each JS file where you specify the exact path.

• Some applications store data in the folder my documents...

  Is it possible to transfer the files resulting to my library folder or to a single folder off the beaten path?

  Otherwise, I guess I could create my own 'My Documents' folder.

  Some programs store information in the Documents folder. Some may be moved and others not. If you do not want a mixture, then you should probably create your own 'My Documents' folder.