Missing functions in the output workspace
I recently added the workspace of output to Adobe Bridge CC, following all the instructions. However, when I click on the workspace there is no 'document', or indeed setting all parameters. See picture attached. Is this something that I did wrong? Something that I have to click to see? I have looked everywhere around and may not know what the problem is.
You have followed the instructions on this page?
How to install Adobe Output Module in bridge CC
Is this bridge CC or CC 2015 bridge?
Could you post a screenshot of the
/ Library/Application Support/Adobe/Bridge CC 2015 Extensions
or
/ Library/Application Support/Adobe/Bridge CC Extensions
folder?
Tags: Bridge
Similar Questions
-
I come to the world CHM HTML5. Is there a way to enable/activate my audience to use:
- Advanced (i.e. other than AND & OR) of the Boolean operators, e.g., CLOSE or NOT
- Nested expressions, for example, newsletter AND ('formula design' OR 'form')
- Generic expressions, for example, network * or MD5?
I am currently using RoboHelp 10.
This version runs (and if not, then don't RoboHelp 2015) support the ability to activate one of these in RoboHelp (via a parameter of GUI or even by manually changing the search.js or another file in the output of HTML5)?
At present, RoboHelp (2015) only supports simple AND & OR operators if I'm not mistaken. If you need an advanced search, I advise you to look in the Zoom website search engine
You can edit the mhfhost.js file. The search mechanism is quite complex, so I don't think it's a viable solution. Of course, please fill out a request for functionality with Adobe Adobe - feature request/Bug Report Form
-
interpretation of TCP read the output string
What is the right method to interpret the data from the TCP Read function? The output is a string of characters, which are obviously not hexadecimal values. How can I convert the string to a binary table or bytes?
OK, time wild guess...
The first four bytes are an indication for SYNCHRONIZATION
The four bytes 0 4 0 0 is a 32-bit integer, GIS bytes less first. 1024
Then you have 6 0 0 0, which could be another 32-bit integer, lsb first. 6
Then your random data
Rod.
-
4.1 output Workspace &; Automounting SMB equity bridge
I have Adobe Bridge 4.1 (CS5.5) running on an iMac i7 under 10.7.2. My problem is that when the selection of the output (Adobe Output Module) workspace Panel gives me options of Board-contact type is totally blank. If I check the Startup Scripts preferences, there is none.
I spent many hours trying to fix this problem and have got to a stage where I can fix and feature, and I can also beat once again.
To break, I put 4 SMB shares to automount using elements of openness in the users & groups system preference. After a disconnect and logging in the output workspace is still a Virgin.
To solve this problem, I remove the following preferences:
com.Adobe.bridge4.1.plist
com.Adobe.bridge4.1.plist.lockfile
LoginWindow.plist
LoginWindow.plist.lockfile
and the following directory:
~/Library/preferences/ByHost/
Having to put users to connect manually to actions is not a huge problem, just an inconvenience, but I wanted to know if anyone has experienced this problem or maybe know how to fix.
I talked to Adobe at length, and just at the moment when I discovered what is causing the problem, they said effectively that I need to purchase a support contract.
Thank you.
Last updated.
It seems to be nothing to do with auto-mounting or SMB shares in itself. One of our shares SMB to a picture library, is called "LIBRARY", and connect to this action be set up automatically or manually, will break the Adobe Output Module.
-
functions of the menu bar missing?
I just noticed that when I turn off the menu bar function to use the Firefox drop-down list certain functions that appear in the menu bar are missing in drop-down screen for example file and view. If they are present, I can't find them or there at - it another way to access these functions without having to activate the menu bar?
You're right that not all functions of the bar menu old is in the new menu of Firefox. That's why we left the ability to switch back. If you don't need the old menu temporarily, hold down the 'Alt' key to activate it.
-
Change the amplitude of the Agilent function generator output while the output is on
Hello
I am writing a program to scan the amplitude of a sine wave of a function (Agilent 33210 a) generator output. I have two sets of pilot example: Agilent 33xxx and HP33120a (the first one uses VISA, IVI 2 uses).
Using the example of driver code, I changed to generate a sine wave to 1Vpp, wait 1 sec, and then modify the amplitude of 0, 5V. I have attached the images in my field that show what happens when I do that. The two examples cut first exit before Relighting with a different amplitude. 33xxx driver takes 140ms for change, and has a strange burst between the two signal. HP3120a driver takes 30ms and cleaner air.
Agilent 33xxx example using:
\
HP33120a example using:
I would like to have the change is instantaneous. When you use the generator manually, I can turn the button and change the output in real-time without delays.
Thanks for the suggestion of Mateus, but I am trying to automate this process of my best. Change the VISA pilot is the direction I want to go.
Thank you crossrulz... I wrote a new issue VI of the Standard waveform VI set up so that it simply writes the new amplitude control and none of the other things. Worked like a charm! Now the waveform changes amplitude without turning off the exit. I also checked to see if re-defining the shape of sine wave (even if the original is also sinusoidal) was the cause of the delay as you suggested, and you were right. Thanks for the help!
-
How to install the output in bridge CC module using an apple OSX 10.9.5 and a miss apple OSX 10.11 this point completely in CC bridge!
Hi abev41080082
Greetings.
- Please visit this link and follow the instructions
Concerning
Rohit
- Please visit this link and follow the instructions
-
Why can't change anything after the conversion in .docx? Missing functions the tool bar?
Hi larrys57575985,
To change a file that you converted to Word format, you will need to download it first and then open it in Word. To download your file, sign in to your account on https://cloud.acrobat.com/files, select the file you want to download and click download at the top of the list of files. Your file will be downloaded in the download on your computer folder. In Word, you may need to click Activate the change at the top of the document.
Best,
Sara
-
How do I get the output of a function table
Hi all
Kindly share your idea.
I need the outputs of a function table only.
Database version: oracle 10.1.0.2.0
login_details:
login_id branch_code
admin 1
Admin1 2
Test 1
user 1
I need output for the query function below.
Select login_id from login_details where branch_code = '1';
If I create a function:
FUNCTION to CREATE or REPLACE fn_get_login (pvBranch varchar2)
IS BACK SYS_REFCURSOR
REF_TEST SYS_REFCURSOR;
BEGIN
OPEN FOR REF_TEST
Login_id SELECT FROM login_details WHERE branch_code = pvBranch;
RETURN REF_TEST;
END;
/
Select * from login_master where login_id in (select fn_get_login('01') from double);
and get
ORA-00932: inconsistent data types: expected - got CURSER
Edited by: 887268 October 8, 2012 12:25You cannot use a Ref cursor in a table, because it isn't a result set of data, it's just a pointer to a request for enforcement.
{: identifier of the thread = 886365}
A ref cursor must be used if you want to refer the request to an external application.
Transfer data back to a function is to use a pipeline for example function
SQL> CREATE OR REPLACE TYPE num_descript AS OBJECT(num number, descript varchar2(30)) 2 / Type created. SQL> SQL> CREATE OR REPLACE TYPE tbl_num_descript AS TABLE OF num_descript 2 / Type created. SQL> SQL> SQL> CREATE OR REPLACE PACKAGE reftest AS 2 FUNCTION pipedata(p_choice number) RETURN tbl_num_descript PIPELINED; 3 END; 4 / Package created. SQL> SQL> CREATE OR REPLACE PACKAGE BODY reftest AS 2 FUNCTION pipedata(p_choice number) RETURN tbl_num_descript PIPELINED IS 3 v_obj num_descript := num_descript(NULL,NULL); 4 v_rc sys_refcursor; 5 BEGIN 6 IF p_choice = 1 THEN 7 OPEN v_rc FOR SELECT empno as num, ename as descript FROM emp; 8 ELSIF p_choice = 2 THEN 9 OPEN v_rc FOR SELECT deptno as num, dname as descript FROM dept; 10 END IF; 11 LOOP 12 FETCH v_rc INTO v_obj.num, v_obj.descript; 13 EXIT WHEN v_rc%NOTFOUND; 14 PIPE ROW(v_obj); 15 END LOOP; 16 CLOSE v_rc; 17 RETURN; 18 END; 19 END; 20 / Package body created. SQL> select * from table(reftest.pipedata(1)); NUM DESCRIPT ---------- ------------------------------ 7369 SMITH 7499 ALLEN 7521 WARD 7566 JONES 7654 MARTIN 7698 BLAKE 7782 CLARK 7788 SCOTT 7839 KING 7844 TURNER 7876 ADAMS 7900 JAMES 7902 FORD 7934 MILLER 14 rows selected. SQL> select * from table(reftest.pipedata(2)); NUM DESCRIPT ---------- ------------------------------ 10 ACCOUNTING 20 RESEARCH 30 SALES 40 OPERATIONS SQL>
but of course, it is wise to just use pure SQL that in order to mix the PL/SQL in queries in the form of best performance features.
Perhaps explain what problem you are trying to solve when trying to use a function, and we can advise you on the best options.
-
Don't know how to test the output of the PL/SQL function
I have a function in the package '. " XCCC_PO_APPROVALLIST_S1' called 'does_cpa_exist ':
The pl/sql valid and commits OK in TOAD.FUNCTION does_cpa_exist( p_document_id IN NUMBER ) RETURN BOOLEAN IS l_cpa_exists VARCHAR2(100); BEGIN SELECT 'Y' INTO l_cpa_exists FROM po.po_requisition_lines_all prla , ap.ap_suppliers pv , ap.ap_supplier_sites_all pvsa WHERE prla.vendor_id = pv.vendor_id AND prla.vendor_site_id = pvsa.vendor_site_id AND pv.vendor_id = pvsa.vendor_id AND prla.requisition_header_id = p_document_id AND EXISTS( SELECT pha.vendor_id FROM po.po_headers_all pha WHERE pv.vendor_id = pha.vendor_id AND pvsa.vendor_site_id = pha.vendor_site_id AND pha.org_id = fnd_profile.VALUE('ORG_ID') AND pha.type_lookup_code = 'CONTRACT' AND pha.authorization_status = 'APPROVED'); RETURN TRUE; IF (p_document_id IS NULL) THEN RETURN FALSE; END IF; EXCEPTION WHEN OTHERS THEN RETURN FALSE; END does_cpa_exist;
I ran the sql in the EBS, and took the path of the workflow looks like that function returned a value of false.
I pass to the function a document_id.
I was wondering how I might test the output of the function from TOAD?
I tried:
But get errors:select XCCC_PO_APPROVALLIST_S1.does_cpa_exist(1017934) from dual;
I do probably bad 101 things here, but I would still ask thinking and risk of being shouted at.ORA-06552: PL/SQL: Statement ignored ORA-06553: PLS-382: expression is of wrong type
Any advice appreciated,
Thank youI was wondering how I might test the output of the function from TOAD?
Try
begin if xccc_po_approvallist_s1.does_cpa_exist (1017934) then dbms_output.put_line ('True'); else dbms_output.put_line ('False'); end if; end; /
-
Cannot use the output of javascript function in the scriptlet
Hi I am using the listboxes in a jsp page. There are 2 drop-down lists.
Once I click on a particular value in listbox1, the listbox2 is filled according to value in listbox1.
which means I want to use the value in the list box as parameter 1 to fill the listbox2.
Note: the values to listbox1 are filled with the values from the table to the oracle database.
Here is the code I tried to frame.
I have a listbox with the following code 1
< select size = "5" cols = "30" name = "view_label" onclick = "testSelect (this.form)" > "
< SCRIPT >
function testSelect (form)
{
var multipleVar = form.view_label.options [form.view_label.selectedIndex] .value
If (form.comments.value == "")
{
Form.comments.Value = multipleVar + "\n";
}
ElseIf (form.comments.value! = "")
{
var insertedMultipleVar = form.comments.value;
Form.comments.Value = insertedMultipleVar + multipleVar + '\n '.
Form.comments.Value = multipleVar
}
}
< /script >
It's listbox 2 which is based on option 1 OnClick of the listbox
< select size = "5" cols = "30" name = "applications" >
< %
ResultSet rsetlovp = lovbean.getAllQueries (/ * Function testSelect output * /);
While (rsetlovp.next ())
{
out.println ("< option value =" + rsetlovp.getString ("query_position") + ">" +)
rsetlovp.getString("query_position") + ' < / option > ");
} % >
< / select >
How can I switch the output of javascript function to getAllQueries() method?
Please can someone help on this...?
Thank you
Ramakrishna
Published by: user1064313 on July 22, 2009 05:33
Published by: user1064313 on July 22, 2009 05:42It's really a bit difficult to answer your question without a little more information. What version of JDeveloper are you using? What is your technology environment?
In the case of JDeveloper 11 g + +, with the Fusion technology stack, you can use a technique similar to that described here:
http://Groundside.com/blog/GrantRonald.php?title=jdeveloper_11_business_services_cascadin&more=1&c=1&TB=1&pb=1JDeveloper 10.1.3 with the default Web technology stack, check here:
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#62If, as looks, it is really a question about generic (no JSF) JSPs, you could actually have a little more success on a generic JSP forum - using scriptlets was not really practical copies within JDev since... Well, since JSTL became available, really. It was a number of years.
As I said, there is really no direct way to use Javascript in a scriptlet - unless you mean something like store the output of Javascript in a hidden field and using the value in a scriptlet on the next request. But at the point where Javascript executes, a scriptlet for the current request will be already performed.
-
Function of the missing sum in list dropdown metric value in config FMS dashboard portlet
In the FMS dashboard, click "Edit property" right to the top corner of each section of the dashboard, we opened 'Config Portlet. Click the tab 'Option' find 'of the metric values. In the document 5.6.3 and 5.6.5, metric drop-down list value must includes the following options:
None
Average
Minimum
Maximum
Minimum/Maximum
Sum
But in my FMS 5.6.5, I don't see "Sum" function from the drop-down list.
Guru can tell me it's a bug or my configuration error?
Thank you
I'm pretty sure. I do a lot of work from Dashboard and have notice that went.
-
Dear all,
I need your help if someone knows this.
I can see is more Gaussian blur in the function of the effect, and I am unable to use it now.
I was see a few error messages when I open the app to CC, please kindly advise how to retrieve and why this has happened...
my system is Windows 7, the reason for this?
Thank you very much for your advice.
Masahira
Try restarting HAVE while pressing the command (Ctrl) - Opt (Alt) - SHIFT keys. This will reset the preferences. If this does not work, it's time for a reinstallation. First uninstall, run the cleanup tool (use the Adobe Creative Cloud cleaning tool to solve installation problems), and then reinstall.
-
Apex data load configuration missing table when importing to the new workspace
Hi everyone knows this show before and have a work around.
I export / import my request for a different workspace, and everything works fine except for 1 loading tables data.
In my application, I use tables of data loading, and it seems that the latter do not properly Setup for the table object to load data. This causes my application to fail when the user tries to download a text file.
Does anyone have a work around next to recreate the table of data load object?
Breadcrumb: Components shared-> load data tables-> add modify data load table
The app before exporting displays Workspace: OOS
Single column 1 - CURRENCY_ID (number)
Single column 2 - month (Date)
When I import the app in the new workspace (OOS_UAT) data type is absent.
Single column 1 - CURRENCY_ID
Single column 2 - MONTH
When I import the same workspace app: OOS I do not know this problem
Version of the apex: Application Express 4.1.1.00.23Hi all
If you run 4.1.1 it was a bug 13780604 (DATA DOWNLOAD WIZARD FAILED if EXPORTS of OTHER workspace) and have been fixed. You can download the fix for 13780604 (support.us.oracle.com) and the associated 4.1.1
Kind regards
Patrick -
Select simple lines that correspond to a column in the output of function group
Writing a query that will search through a set of data that returns the codes bar of the CompoundNames who have a quantity amount > 500.
Then if it ran against the sample table below the output would be
0005
0006
0007
0008
0009
0010
Code bars, CompoundName, BatchId, quantity
--------------------------------------------------------------
0001, XE 1000, 1000 100 XE, 100
0002, XE 1000, 101 1000 X 100
0003, 102 1000 XE, XE 1000, 100
0004, XE 1000, 1000 103 XE, 100
0005, 2000 XE, XE 2000 100, 100
0006, 2000 XE, XE 100, 2000 101
0007, 2000 XE, XE 2000 102, 100
0008, 2000 XE, XE 2000 103, 100
0009, 2000 XE, XE 2000 104, 100
0010, 2000 XE, XE 2000 105, 100
0011, XE 3000, 3000 100 XE, 100
I had this day
Select CompoundName, Sum (Quantity) OF Table
CompoundName GROUP
HAVING Sum (Quantity) > 500)
compoundname order;
But I need every barcode corresponding to each batchid, while the total amount of lots is > 500.
TIAWelcome to the Forum,
The following approach will work for you.select distinct * from ( Select Barcode, CompoundName, SUM(QUANTITY) over (partition by CompoundName) sumqty FROM Table ) where sumqty > 500 order by compoundname;
TRN
Sudhakar B.
Maybe you are looking for
-
I have a mailbox with hundreds of emails I will use is no longer, but I want to save it outside TB. Is it possible to do?Thank you
-
I reinstalled Firefox and somehow, I lost all that I see is toolbars, tabs "Firefox" and a 'Firefox Start Page', butdon can't get the next line to enter the adresse_web. I had a few other toolbars superfluous up there a deleted them. I uninstalled Fi
-
I have two versions of firefox at the same time?
Hello Probably a stupid question but I have two versions of Firefox on my system at the same time? The reason is add-ons that are not compatible with v4. I wish I could close v4 when I need to use an Add On v3. Thank you.
-
Pavilion 15-p030nr: HHD on SSD w / cloning for HP beat edition special 15-p030nr
Hello. -J' bought my laptop when it was Win 8.1. When MS offered 10 win I accepted this offer. So, there now earn 10 (64-bit). -After several attempts, I've never had success doing my 1 copy backup allowed the operating system... before or after th
-
(1) I tried to access "Windows Defender", but when the message came he said... "Windows Defender is turned OFF"error message is Ox800106ba. I do not know how to enable Windows Defender so can help you please? (2) I don't know if I'm allowed to ask tw