Missing layers on iPad with CV

Similar Questions

• I get no picture on the TV when using mini ipad with the Digital AV adapter.

  I get a white on my TV screen when I connect my mini ipad digital AV adapter except HDMI 1 showing in the upper left corner of the TV screen. My mini2 ipad works great with the same son and TV.  I tried two ipads with different TV but get the same result. The ipad mini works OK if not connected to the TV. Two minis are working on the same operating system setting.

  The Digital AV adapter can be finnicky.

  Have you tried simply unplug and plug the adapter with the HDMI cable connected with it?

  With the adapter always plugged into your iPad, have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to the dark and restarts with the Apple logo, then release them buttons?

  Good luck!

• How to configure pop3 on ipad with iOS 9.3.3 mini mail

  How to make the configuration of email pop3 on ipad with iOS 9.3.3 mini

  Try the steps in these Apple articles.

  Set up an e-mail account on your iPhone, iPad or iPod touch - Apple Support

  Get help if you have any questions using a POP email with multiple devices - Apple Support account

• I can't synchronize my new iPad with iTunes on my computer.  All software has been updated, but the computer always tells me to update iTunes on the iPad software. Any suggestions on how to get them in sync?

  I can't synchronize my new iPad with itunes on my computer.  Both had all put software up to date.  The computer continues to tell me it cannot sync and I need to update software on the iPad.  Any suggestions on where to go next?

  What version of iTunes you are using? What is the exact error message you see?

• can send but cannot receive messages on ipad with IOS new 9.3.2 waves I

  can send but cannot receive messages on ipad with IOS new 9.3.2 waves I

  1. make sure that the information entered in the transmission & reception area in settings - Messages is correct

  2. If so - settings - Messages - switch off

  Log settings - iCloud

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  If you can't send or receive messages on your iPhone, iPad or iPod touch

• Updated my iPad with the new OS.

  Updated my iPad with the new OS. Initially it lights, so I have two buttons held together and finally happened. Now it is stuck on the screen with the time and will not move forward, nor is it resets. Is there any solution for this?

  Thank you

  Kat

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  If a force restart does not help try recovery Mode:

  https://support.Apple.com/en-us/HT201263

• Can you determine the model of the iPad with DK S/N * VD2?

  Can you determine the model of the iPad with DK S/N * VD2? I've upgraded to a newer iPad and need to sell the former. He reconnects with the default status, and I would go instead through the installer to get this info.

  < personal information under the direction of the host >

  Go to settings - general - about - Scroll down - must be model number

  (1241)

• Can a crook hack an iPad with just the iPad serial number

  AN alert came on my iPad while I was with safari and he said I had a virus and I had to call a specific number to solve the problem. I called and hey asked me the serial number of the iPad, and I gave that person and after that he seemed suspicious, so I hung up. They always have my serial number, so I was wondering if they can hack the iPad with just the serial number?

  This serial number is linked to your iPad. The call is a scam!

  If you have configured authentication code your on your iPad, even if they have the serial number it should not make a difference.

  If you have not set one, do it immediately > use a password with your iPad, iPhone or iPod touch

• My office print 8600 ProPlus will not print pdf files sent from an iPad with ePrint.

  My office print 8600 ProPlus will not print pdf files sent from an iPad with ePrint.  I just get an error message when I go to the HP Eprint centre.  It prints the address email of the coverage, but nothing else.  The attachment is not sure that I can see.  I tried to send an attachment from my Mac and worked well.

  Thank you for your response and I am sorry for the delay to return to you.  I tried save the Pages document in a Word document and send it to the printer using ePrint but it is even.  That is to say the handout printed but not the attachment.  However, when we removed the accompanying document and sent the attachment in its own it has worked well for we have managed to solve the problem. Thank you very much.

• After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue?

  After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue? Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• I can't sync my ipad with my Mac

  I can no longer sync my IPad with my Mac. I get a message that I need the latest version of itunes.  I downloaded it but still get the same message.  I have an ipad 2 in air, a Mac with OS 10.6.8 11.4 Itunes.

  No experience, but it seems that a new iOS might well require a new OS X = time marches on, like the progress...

  What Mac do you have? Upgrade to El Cap seems possible

  ...

  Chances are, your Mac can run El Capitan.

  Some models introduced in 2007 and 2008 and Mac computers introduced in 2009 and later, can be upgraded to El Capitan.

  Just make sure he's ready.

  If your Mac is under Snow Leopard (10.6.8) or later, you can skip to El Capitan.

  ...

  from there > http://www.apple.com/osx/how-to-upgrade/ - you have to muscle your RAM, but RAM is affordable enough these days

• Problem setting up my iPhone, iPad with printer MFP HP 1213

  I have an iMac, MacBook Pro, iPad, iPhone 3, iPhone 4, iPod. Almost all have the iOS responsible henriq. I have also two HP multi function printers: HP LaserJet M1536dnf MFP so MFP HP LaserJet Professional M1213nf. Recently, I downloaded PrinterControl from the iTunes Store and installed on my iPhone, iPad etc. The above two printers are connected on two separate wifi networks. The 1536 printer when I try to connect to my iPhone, the iPad with PrinterControl I am able to print, scan and do everything. All handheld computers are able to immediately recognize the printer. Unfortunately when I try to connect to 1213 all-in-one that is located on another wifi network and is connected to a time Capsule I am unable to do so. The PrinterControl says "no printer found. On the other hand in all the devices of Air print feature is working perfectly fine. I can take my fingerprints of mail and it is recognizing the MFP 1213 easily and get the made impressions.

  Even after through many forums and discussion forums, I couldn't solve the problem. I contacted HP support and said I need to contact Apple support. I also tried and contacted the Apple support which in turn said that because the PrinterControl is a third-party application they will not be able to provide any help/support and Air Print being workinf fine then there is no problem with Apple products. Please help, how to reolve the question and 1213 HP MFP get well with Apple products.

  Hello

  I'm afraid that this behavior is expected because the M1213 is not supported by the HP printer control application.

  You can find this information listed for the HP LaserJet Pro M1210 Multifunction Printer Series within the category Printers HP LaserJet Consumer below:

  http://support.HP.com/us-en/document/c02814760

  Shlomi

• Can I restore my new iPad with an old backup? I got a new mini Christmas 4

  I received the new iPad mini 4 for Christmas. Went up to the back of the iPad configuration older but only available for backup option was 5 Dec because new iPad was iOS 9.0 & older had already been upgraded to 9.2.

  so I set up new Ipad with the Dec 5 backup... can I now go back & restore with a more up-to-date, since both are upgraded to iOS 9.2? If so, how?

  Update on the new iPad iOS 9.2 then back up to the fact that the system should be available.

• restore the ipad with icloud owner account

  restore the ipad with icloud owner account information

  You can't do that. Activation lock won't let you. If you are unable to contact the previous owner, you have a useless device on your hands.

  Find my iPhone Activation Lock - Apple Support

• I want to know if the ipad with this serial number DM * 5VJ if it still warranty

  I want to know if the ipad with this serial number DM * 5VJ if it still warranty...

  Watch: https://checkcoverage.apple.com/ca/en/