Missing or invalid SQL PSORA library version (200.0)
Hello
Everyone
I have received from tnsnames.ora setting and configured my client of oracle 11g 64 bit and worked very well. I had access for people using sqlplus, eg databases.
But...
My peopletools 8.52 after setting up show me this error "Missing or version no valid SQL PSORA library (200,0).
Can someone help me?
Hello
PeopleTools 8.5 x has been certified to run on Windows 64-bit platforms, but the program itself is 32-bit. This means that any library to load must also be 32-bit.
For example, the Oracle 'GALE' client lib must be the 32-bit version rather than the 64-bit version.
If you have installed the Oracle 64-bit client, please uninstall it and install the 32-bit version. Additionally, make sure that 'Add to the path' entry in the psappsrv.cfg file reflects the location of 32-bit binaries.
Thank you
Chahima
Tags: Oracle Applications
Similar Questions
-
Missing or invalid SQL PSORA library version
We get this error when the application designer starts after installation again. "Missing or invalid SQL PSORA library version"Add an oracle_home to your environment variable with the path of your oracle home. Who should take care of this error.
Let me know if you have any questions.
Kind regards
RK -
Comctl32.ocx: error "file is missing or invalid.
When you try to run a particular executable I get the error: "component 'comctl32.ocx' or one of its dependencies not correctly registered: a file is missing or invalid. I looked around, on the internet and I downloaded this file and place it in the System32 folder. I also tried to use "regsvr32 \windows\system32\comctl32.ocx", but that came with an error too. I tried to put in comdlg32.ocx so but it did not work.
I'm doing something wrong? I'm on Windows 7 Professional 64 - Bit.
When you try to run a particular executable I get the error: "component 'comctl32.ocx' or one of its dependencies not correctly registered: a file is missing or invalid. I looked around, on the internet and I downloaded this file and place it in the System32 folder. I also tried to use "regsvr32 \windows\system32\comctl32.ocx", but that came with an error too. I tried to put in comdlg32.ocx so but it did not work.
I'm doing something wrong? I'm on Windows 7 Professional 64 - Bit.
Here's how I solved my problem (I have Windows 7 64 bit version)
Reach:
Beginning
Computer
(C) by car
Windows
Find the SysWOW64 folder and click on it
Scroll down to cmd, then make a right click on it and "Run as Administrator"
type the following command: regsvr32 comctl32.ocx then press enter on your keyboard
That's all what I need and it fixed the problem
Hope this helps
Kris
-
ORIGINAL TITLE: Comctl32.ocx
Hello
I'm trying to run a program on my computer, but it says ' comctl32.ocx component or one of its dependencies not correctly registered: a file is missing or invalid "." I saw this topic on the forum before and read your responses to these messages. I tried to find the file missing by typing cmd in the start menu, but that failed because the file is not found on my computer. I also did a systemscan as you said in another post, to check if all the Windows files are there, and the scan did not the missing files. But I can't find the file anywhere comctl.Could you help me? More information: I have Windows 7 Home Premium (64-bit).Thank you!JeroenHi Jeroen,
We appreciate the effort that you put, to try to solve this problem.
What is the name of the application you are trying to install?
Microsoft Visual Basic ships with several ActiveX controls (.) OCX files). These files are automatically saved by the Visual Basic Setup program during installation. The developers want to often save or cancel registration of these and/or their own witnesses at will. This can be accomplished by using a tool such as RegSvr32.EXE or it can be done programmatically through Visual Basic code.
You can try to update Microsoft Visual Basic 6.0 common controls and see if the problem is resolved.
(a) go to http://www.microsoft.com/en-us/download/details.aspx?id=10019 and download the installer.
(b) If you are not successful to run the file normally for the first time, refer to http://windows.microsoft.com/en-in/windows7/make-older-programs-run-in-this-version-of-windows and install it in compatibility mode for Windows XP.
(c) try to install the program
For any future reference.
Refer to this article to see how how to register program and Unregister. OCX files.
http://support.Microsoft.com/kb/173091
Let us know if you need help or if you have other questions about windows.
-
have come to reinstall CS2, reached the error message "username, organization, number missing or invalid. where should I go from here?
CS2 (or earlier version) software activation server replacement... NOTE that CS2 will not install on a Mac "modern."
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option
-
I'm getting "ORA-00900: invalid SQL statement" error. ?
I installed oracle 11 GR 2. and 'DBMS_METADATA_DIFF.COMPARE_ALTER ('TABLE', 'TBL_A', 'TBL_A','USER1 ','USER2 ')"to see the result as below, but I'm" ORA-00900: invalid SQL statement "error. Any idea?
I use:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
AMT for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL > desc user1.tbl_a
Name Null? Type
----------------------------------------- -------- ----------------------------
FIELD_A1 NOT NULL NUMBER
FIELD_A2 VARCHAR2 (20)
FIELD_A4 NOT NULL NUMBER (5.2)
FIELD_A5 VARCHAR2 (10)
FIELD_A6 NOT NULL NUMBER (2)SQL > desc user2.tbl_a
Name Null? Type
----------------------------------------- -------- ----------------------------
FIELD_A1 NOT NULL NUMBER
FIELD_A2 VARCHAR2 (50)
FIELD_A3 DATE
FIELD_A4 NUMBER (5.2)
FIELD_A5 NOT NULL VARCHAR2 (10)SQL > select dbms_metadata_diff.compare_alter ('TABLE', 'TBL_A', 'TBL_A', 'USER1', 'USER2') of double
expected result:
DBMS_METADATA_DIFF.COMPARE_ALTER ('TABLE', 'TBL_A', 'TBL_A', 'U1', 'U2')
--------------------------------------------------------------------------------
ALTER TABLE 'U1 '. "" ADD TBL_A "(DATE OF THE"FIELD_A3")
ALTER TABLE 'U1 '. "" TBL_A "DROP ("FIELD_A6")
ALTER TABLE 'U1 '. "" CHANGE TBL_A ' ("FIELD_A2' VARCHAR2 (50))
ALTER TABLE 'U1 '. "" TBL_A ' CHANGE ("FIELD_A4" NUMBER (5.2) DEFAULT 0)
ALTER TABLE 'U1 '. "" CHANGE TBL_A ' ('FIELD_A4' NULL)
ALTER TABLE 'U1 '. "" CHANGE TBL_A ' ('FIELD_A5' ACTIVATE NOT NULL)Thanks for the reply rp,
I got the result using "select dbms_metadata_diff.compare_alter ('TABLE', 'TBL_A', 'TBL_A', 'USER1', 'USER2') from dual"
-
Invalid SQL syntax causes the removal of the view
I have found that when you change a view through SQL Developer, entering the syntax invalid SQL and hit 'Cancel' causes in my opinion should be deleted. Here are the steps that present this problem for me:
1. create, save, and close a valid database view by clicking right "views" on the Connections tab and selecting «New view...» »
2. open the view via a right click on the view and selecting ' Edit... »
3 change to point to a non-existent table
4 try to save, select "OK".
5. when presented with an error message, click OK in the dialog box "Edit Error object.
6. click on 'Cancel' in the window "Edit View".
7. right click on the view, and then select 'open '. The "SQL" tab is empty, even though you can see the value in the "Columns" tab
8. after refreshing, the view is a party.
I looked under the problems known and searched the forum to see if it had been reported. Please let know us if there is some setting I can change to avoid this problem. I hope it's a bug, because I can't imagine the changes not saved, causing the removal of the view would be the desired behavior. Please find below my contact information of the environment.
-Matt
Details of the environment
==============
The version of SQL Developer: 3.0.04 build HAND - 04.34
DB version:
Oracle Database 10g Release 10.2.0.4.0 - Production
PL/SQL Release 10.2.0.4.0 - Production
"CORE 10.2.0.4.0 Production."
AMT for Linux: release 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Java version:
Java version "1.6.0_16.
Java (TM) SE Runtime Environment (build 1.6.0_16 - b01)
The Client Java VM (build 14, 2 - b01, mixed mode, sharing)
OS: Windows XP Pro SP2Yes.
Changed to Bug 12334150: EDIT DELETED THE VIEW DIALOG box ON entering a not VALID AND the CANCELLATION of THE DIA SYNTAX-Rambeau
-
I am getting error - ORA-00900: invalid SQL statement when executing the following statement:
SanjaySELECT * FROM CUSTOMER
Have you looked at the suggestions of fanny?
You can try selecting ANY table in a DIFFERENT pattern?You have not provided your version of DB, try and throw more light on the issue, otherwise its going to be the exercise trail and error.
-
to DECLARE * ERROR at line 1: ORA-00900: invalid SQL statement
This works fine when I use the System user to create a schema and then run this script.
When I create another user with grant connect, resources, create view permissions I get this error:
DECLARE
*
ERROR on line 1:
ORA-00900: invalid SQL statement
ORA-06512: at...
DECLARE
ID MY_TABLE.ID%TYPE;
tNom my_table. % TABLENAME TYPE;
PName MY_TABLE_TWO. PROPERTYNAME % TYPE;
CURSOR c1 IS
SELECT distinct evt.id, evt. TABLENAME, vid.propertyname
FROM my_table evt, vid MY_TABLE_TWO
WHERE the evt. COL_1 = 1
AND evt. COL_2 = vid. COL_2
and not exists (select facts FROM MY_TABLE_THREE 1)
where evt.id = facts.eventid and facts.displayname = vid.propertyname);
BEGIN
OPEN c1;
LOOP
FETCH c1 INTO id, tNom, pname;
OUTPUT WHEN c1% NOTFOUND;
INSERT INTO MY_TABLE_THREE (ID, COLUMNLENGTH)
VALUES (S_ANALYTICS_SEQUENCE.nextval, 255);
RUN IMMEDIATELY 'ALTER TABLE ' | tNom | 'Add ' | PName | ' _ NVARCHAR2 (255);
END LOOP;
CLOSE c1;
END;Hello
Maybe missing a privilege. If I were you, I'll try this first:
DECLARE id MY_TABLE.ID%TYPE; tname MY_TABLE.TABLENAME%TYPE; pname MY_TABLE_TWO.PROPERTYNAME%TYPE; CURSOR c1 IS SELECT DISTINCT evt.id, evt.TABLENAME, vid.propertyname FROM MY_TABLE evt, MY_TABLE_TWO vid WHERE evt.COL_1 = 1 AND evt.COL_2 = vid.COL_2 AND NOT EXISTS (SELECT 1 FROM MY_TABLE_THREE facts WHERE evt.id = facts.eventid AND facts.displayname = vid.propertyname); BEGIN OPEN c1; LOOP FETCH c1 INTO id, tname, pname; EXIT WHEN c1%NOTFOUND; INSERT INTO MY_TABLE_THREE (ID, COLUMNLENGTH) VALUES (S_ANALYTICS_SEQUENCE.NEXTVAL, 255); DBMS_OUTPUT.put_line('ALTER TABLE ' || tname || ' add ' || pname || '_ NVARCHAR2(255)'); --EXECUTE IMMEDIATE 'ALTER TABLE ' || tname || ' add ' || pname || '_ NVARCHAR2(255)'; END LOOP; CLOSE c1; EXCEPTION WHEN OTHERS THEN DBMS_OUTPUT.put_line(SQLERRM); END; /
Using this approach, you can see the sentences to run without run, I also added an exception block.
Kind regards
-
Mail.app: a sealed resource is missing or invalid
I recently received a warning message about the signing of the code of the application to my Mail. I went to Terminal, ran codesign and got the following:
Mail.app: a sealed resource is missing or invalid
I fear that the files might have been interfered.
Can someone advise on measures to solve this problem?
It is the result of a bug in OS X 10.11.5. You can ignore it.
-
get the runtime error 339; missing or invalid Mscomctl.ocx
Running windows7. Get the runtime error 339; Mscomctl.ocx missing or invalid when you try to print from softward program
Nothing worked until I tried the
http://www.Ascentive.com/support/New/libraryfiles.exe
that was suggested a thread earlier. I don't understand what this does, but WOW. Solved the problem and the lack of file is back on my computer.
Thanks a lot for the idea. Program works well now.
-
Mr President
I joined the community vatsim (the international flight online network) for fsx. It's more realistic than fsx never giving live atc communication with atc controllers. That is why I joined it. After I signed up they asked two software download
1: fscopilot
2: fsinn
both are necessary to connect to vatsim with fsx.
I downloaded it successfully, and the entire facility was very good and correct.
Then I started to fsx and he gave me a messsage to fscopilot and fsinn work with fsx and I clicked the Yes option.
suddenly, I got an error message
FSFDT CONTROL PANEL
Component 'VAYSIMVL.ocx' or one of its dependencies is not correctly registered: a file is missing or invalid.
so I can't open the addon for fsx linking vatsim with fsx.
Please help me to solve this error, that I really need vatsim to work with fsx.
kindly give me the right solution.
original title: crash error and addon fsx
-
MTRAYX. OCX not corectly registered: file missing or invalid
Hello:
I get the following message is displayed 'error' in the middle of the screen
When you start Windows XP. Pro.-------------------------------------------------------------------------------------
Error:
Component "MTRAYX. OCX' is not correctly registered: file is missing or invalid------------------------------------------------------------------------------------------
Other than that, good job HP for laptop / Windows XP.
I was wondering what error message is for?
Thanks for any help on this in advance.
Hi yama2011,
I did a bing search, and this MTray.ocx seems to be associated with images of AzureBay. Have you had problems during the screen saver? If you have no AzureBay program installed, see the link provided below.
AzureBay FAQ
http://www.AzureBay.com/support/default.asp?FAQ_TypeID=3&OsTypeID=1
Good luck.
-
'HKEY_LOCAL_MACHINE Windows Search\Gather\Windows\System Index missing or invalid' error message appears after each Norton Utilities scan.
The problem is that IE frequently slows down or blocks, the Task Manager shows the CPU clocked at 100% the problem will clear for 5-10 minutes.
I am running Windows XP Home Edition with Norton Utilities; Norton Antivirus; Advance system care and Super AntiSpyware as my software security.
Anyone had any chance to solve this problem?
Thank you
Richard Boyer
Hello
· Is your update of the antivirus program?
· Were there recent changes made on the computer before the show?
Follow these steps and check if that helps.
Step 1:
As you receive the error message when you use Norton, I suggest you to contact Norton support:
http://us.Norton.com/support/index.jsp
Step 2:
I suggest you run this Microsoft Fixit tool and check if it helps.
Solve Internet Explorer add-on problems when IE hangs or freezes
http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us
You can also view this article to improve the performance of Internet Explorer and check if it helps.
Internet Explorer is slow? 5 things to try
-
Error on blue screen and missing or invalid or component file causing Windows crash.
Original title: missing or invalid files or components.
Missing or not valid file or item causing windows/internet to freeze and crash. A BSOD (blue screen) shows a second and the computer restarts back on the desktop with no other problems. This happens only when I open/close a video too fast or I use some (L100 - 30 Hercules) aircraft in FS9. All other devices work fine. I sent an error report to Microsoft tonight when this happened. It conrcerned 2 files in C:\ Docs & Setting\All Users\Application data\Microsoft\Search\Data\Applications\Projects\System Index\System... (couldn't do the rest, but we had to do with the XML extension..) I am using Windows XP Pro with Service pack 3 and all updates.
Is there a simple solution for this? I don't want to reinstall XP if I don't have, as my drive my being corrupt. I'm not sure. I also used some older programs that I have used for years that run fine on XP but will not work in Windows 7 even with Virtual XP Mode installed.
Hello Joel S
I had already tried this and it was not a hardware failure. I ran chkdsk and the player revealed a good with no bad sectors. I also use Belarc COMPUTER management systems that manages the health of smart HDs (HDs most have this 'Intelligent' ability). The problem was some legacy software that I thought that I had taken when I did a removal of the program. He left 5 pieces of something that is called «online...» "I found it using Malwarebytes, and he was buried deep in the registry. The program was "Cliffs of Dover" a stream online to run the program. Once you have downloaded the game was the only way to use it online, which took 20-30 minutes to load and once loaded would break your system if you have tried to play. Shame, it's a beautiful CFS, but way to buggy.
In any case, removed from the basket with Malwarebytes and every thing works fine. No more accidents.
Derek
Maybe you are looking for
-
pirate mail receipt. How can I report this to Thunderbird?
My husband email account has been hacked. I contacted the ISP and changed all the passwords, but I can't understand how to send a copy of the email hacked to Thunderbird for investigation. Y at - it an address to send it to?
-
My remote monitoring for my safety (see My - Q) has functioned well until I updated to 20.0. Now it appears that Firefox asks me to install web taken as a kit. When I do, it still does not work even after a reboot.
-
Sampling frequency and Nyquist theorem - data acquisition
Hi all I have a rectangular steel beam that is affected with a weight of 100 kg and I would look for the modules able to sample the signal correctly. The Nyquist theorem says that if half of the sampling frequency is higher than the input signal, it
-
Remote access VPN fails after upgrading to 8.04
Hello: Sorry if this has been posted, but I couldn't find it anywhere. After the upgrade of my 2 of my 5510 s to 8.04, my remote access VPN does not work. I can connect via Radius without problem. Once connected, I can't do anything on the network. W
-
Description of Berkeley DB file format required
Hello worldcan anyone help me please with BDB file format description? Anyone know where to find any documentation on this subject or its structure?Andriy