I've updated to 20.0 and now my web client to use to analyze my home security (see My - Q) is no longer works. What I have to do.

Similar Questions

• Window update for Vista didn't and now it stops when I use all the features.

  I did my update for Vista window and now it stops when I use all the features. I use Google Chrome and the recent update adds Bing Bar.

  Hi Izzy2222,

  ·         Did you put any power on the computer plan option?

  I recommend to open Event Viewer and find the exact description of the error. The newspaper of errors in your next post relay.

  See also: What are the information contained in the logs of the event (Event Viewer)?

  In the meantime, follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• I just updated my Apple TV and now my music does not

  I just updated my Apple TV and now my music won't work - white screen - everything seems OK?  YES restarted. Power Cycle YES.  Any ideas?

  Works fine on my system. Try to connect to and on your iTunes account.

• I updated my iPad today and now I can't get cellular internet. Can anyone help please?

  I updated my iPad today and now I can't get cellular internet. Can anyone help please?

  It is a bug in 9.3 and persists in the 9.3.1

  to get back to be

  1. turn off the power, remove the sim card, reverse and insert sim card when asked. Or

  2 disable cellular data, mode airplane and then turn off. Wait about 30 seconds and then turn it on turn off the airplane mode and then turn on the cellular data. He must find it.

  but this is only a work around.  If you turn off again, you will have the same problem and her you need to repeat the steps above.

  Good luck

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• I've recently updated to El captain and now my Mac (which is quite old) is slow dreafully.  Take everything 10 times more than before.  Any tips on speeding to the top?

  I've recently updated to El captain and now my Mac (which is quite old) is slow dreafully.  Take everything 10 times more than before.  Any tips on speeding to the top?

  I have two Macs running El Capitan, which is old enough (2008 iMac) and am not at all have this problem. If you look through these forums, you will find that many of the slow running issues have been resolved simply by getting rid of the 3rd party anti virus and Mac apps from cleaning. Here, the consensus seems to be that these applications are useless on Macs and slow them down at best and are downright harmful in the worst case. I have none of them on any of my Macs and you have never run in the problems of virus or malware from OS X launch back to 1999. My advice would be to uninstall everything these programs from your Mac and see if that helps. And don't bother to re install later. You do not claim them, particularly the so-called cleaners. OS X does this work by himself.

  Rick

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• a 11 updates on my laptop and now it runs very slowly

  I just had 11 updates on my laptop and now it runs very slowly, WHY? before the updates, weather...  Also have no idea what beta is (at the bottom of this)...

  Hello

  1. what operating system is installed on the computer?

  Check Windows Update settings and try to set it to automatic to install the last Windows Update to keep your computer up-to-date and secure.

  How to configure and use automatic updates in Windows

  http://support.Microsoft.com/kb/306525

  Resolution:

  In case you have Windows 7, you can run the troubleshooting of Windows 7 performance and check if that helps.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• updates installed live mail and now the spell checker does not work

  updates installed live mail and now the spell checker does not work

  You will find support for Windows Live Mail in this forum: http://windowslivehelp.com/forums.aspx?forumid=b91657c9-9031-4406-a398-7d0783119bb7

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My computer turns off during an update to windows xp and now windows xp will not load.

  My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

  Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.

• Windows Vista - I recently updated my free dongle and now its loaded and saved with a mistake,

  Original title: salvation

  Hi, I have recently updated my free dongle and now its loaded and saved with a mistake, he says that he cannot find converter or something. It won't let me not uninstall what it cannot find it in the library.  How do I get this completely removed? I even tried system restore but its still always on, I have completely removed before but can't remember how I did it

  Hi, I have recently updated my free dongle and now its loaded and saved with a mistake, he says that he cannot find converter or something. It won't let me not uninstall what it cannot find it in the library.  How do I get this completely removed? I even tried system restore but its still always on, I have completely removed before but can't remember how I did it

  Hello. Please download this free uninstaller.
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  and remove the software and reinstall and check.

• Try to update Java, Adobe Reader and now RIM Blackberry Desktop Manager, Error 1606 could not access network location.

  I got this error for a few months. Initially, I came across it trying to update Java, Adobe Reader and now RIM Blackberry Desktop Manager.

  The specific error is "Error 1606 could access the network location:.", with the colon and the dot at the end. Therefore, it is difficult to know exactly what registry entry, it's.

  I tried to change various registry keys and using a number of files of Microsoft "Fix it for me", but the error remains.

  Can someone help me please identify the location of the network that weird symbols ":." to refer and possible to put an end to this problem once and for all?
  I'd be happy to re - try fix if proposed as a possible solution.

  Thanks in advance.

  Hello

  1. What microsoft fix it did you try?
  2. don't you make changes on the computer before the show?

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  The steps to correct this problem involve editing the Windows registry.

  WARNING: this method contains steps that tell you how to modify the registry. However, serious problems can occur if you change the
  Register incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it.
  Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
  a. Click Start and typeregedit in the search box start and press to enter.
  b. find the following registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
  c. remove the entries that show the path that is listed in the error message.

  You can also consult the steps in knowledge base article provided assistance:
  http://support.Microsoft.com/kb/886549

• Windows install the latest updates on my phone and now I can't access the internet

  Windows Installer automatically of updates on my computer and now even if the system connects to the wireless network and I have only local access he has no internet access.  I tried both with the wired and wireless options and nor will not work.  Everything worked fine until the update system - do not know if I have to do a system restore to when he installed updates (I tried to restore to a point a few days before the download, but it failed) or if I should try to uninstall updates.  While I am not very confident with the work on the computer would like some advice on the best way to go.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• I've updated the motherboard (Asus) and now Nvidia card beats nice work my PC do not play the .mp4 files

  I've updated the motherboard (Asus) and now Nvidia card beats nice work my PC do not play the .mp4 (with VLC, Quick time player ect..) files

  And what about the Windows Media Player12?

  You must uninstall and reinstall VLC Media Player, it seems codecs has been corrupted. You can also download and install ffdshow