mix records with files while sorting

Similar Questions

• Mix records with the same name of the internal and external space (clip +)

  Hello

  I have a question regarding the reading of 'File': if having a folder on the inside and external space microsd, both are named "graphics". Is it possible to shuffel these 2 files with the same name? There are also a few other folders I want to be included, so I just couldn't use the "play all" option. I don't want to use replay by id3tag because mines are always screwed up and would be a lot of work to mark all the appropriate files in the.

  Thanks for help

  m.

  I've not played with playlists much.

  If ID3 tags are all screwed up, I would use the MP3tag utility to change the label of the kind in "Charts" on internal and external memory, then you access the kind-> just Charts and play at all.  It is probably not an option if your labels are blank and you don't want to ruin you, but it's really quick & easy to do with MP3tag.

  I think that even Windows Explorer (XP/Vista) can change the field type in the batch (select all 'charts' music files, click right properties, summary (Advanced) tab change the field of its kind in "Charts", OK).  I keep the ID3tags 'good' on my PC, but edit on my player according to the needs.

  Just another idea which is really easy if you're not afraid of screwing the ID3 tags.

• I am wanting to sort a walk down to the granular level and there are folders with files, etc.. Is there a product on the market that can do this?

  Original title: walk sorting

  I am wanting to sort a walk down to the granular level and there are folders with files, etc.. I am wanting to sort by date created or modified. Is it possible to set the entire disk for all files without having to open each indvidual folder for a list, or is there a product on the market that can do this?

  Sorting all of the drive is not possible. Perhaps, it can be done by another program I'm not aware of.

• listen to online audio while recording with tape recorder

  I use the sound recorder, with a signal line. Is there a way to monitor the audio while it is registered?  That would be really helpful so I can change parts of the audio that I don't want.

  vista operating system

  Hello

  To save as you describe computer must have the ability of full-duplex sound and it
  do not have. Check with Support from the manufacturer of the system, online documentation, and
  their forums (if any).

  If a PC, you can add a sound card with this ability and remove the card present or
  disable the sound board.

  If the laptop and your system does not have this capability there are 3 party USB sound cards
  available with this ability.

  Here's a Google maps USB sound - and there seems to be some with this ability.
  http://www.Google.com/#hl=en&q=USB+sound+cards&AQ=f&AQI=G10&aql=&OQ=USB+sound+cards&gs_rfai=&FP=ca6b5a4f84435186

  Maybe this will help you:

  http://www.recordingreview.com/soundcard/soundcard_wizard.php

  Also check out the "getting started with Home Recording" link on the right - it must
  to register but it's free.

  http://www.recordingreview.com/articles/blogs/76/A-few-notes-about-PCI-sound-cards-and-audio-interfaces.html

  There are probably other sites like this one and I don't know which is best.

  ----------------------------------------------------------------------------------------

  You also need software with more features than sound recorder to check these.

  Audacity - free
  http://Audacity.sourceforge.NET/

  Free Audio Editor 2010 - free
  http://www.free-audio-editor.com/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different with different

  Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different files with different after encoding names?

  Located in and out on a section and that export brands.

  .. .Rinse and repeat for the other section.

  Name each section and where it is exported to separately... and as you wish

• The video is too slow for audio, the file is .mp4, he recorded with my webcam with Toshiba Qosmio X 75 - A7170. Also sometimes audio rehearsals.

  Hello

  For videos when I record with my webcam on my Toshiba Qosmio X 75 - A7170 and then place it in Premiere Pro the video seems behind the audio.

  Stats on my laptop:

  Processor: Intel Core i7-4700MQ CPU @ 2.40 GHz

  RAM: 16 GB

  System type: 64-bit

  Memory speed: 1600 mhz

  Hard drive: 1000 GB mechanical_hard_drive

  Graphics card: NVIDIA GeForce GTX 770 M

  Graphics RAM: 3072 MB

  Hard Drive rotation speed: 7200 RPM

  If the video is behind and, occasionally, for some reason, the audio will be repeat or even start again from what sounds are going on at the beginning.

  The file is saved with my webcam recording is .mp4. I don't know what else to say to halp please.

  The video file is played as usual when I use windows media player.

  I use first Pro CC v8.1

  Hi Bellebacon,

  You have variable speed of frame video. RIP to the handbrake and you will have a file, you can use: https://handbrake.fr/downloads.php

  Thank you
  Kevin

• Why the execution time increases with a while loop, but not with "run continuously?

  Hi all

  I have a problem of severe weather that I don't know how to fix it because I don't know exactly where it comes from.

  I order two RF switches via a data acquisition card (NI USB-6008). One job at the same time can be selected on each switch. Basically, the VI created for this feature (by a colleague) resets all the outputs of acquisition data and active then those desired. It has three entrances, two chain simp0le controls and a cluster table, that contains the list of all the outputs and some practical information to know what is connected (specific to my application).

  I use this VI in a complex application, and I have some problems with the execution time, which increased whenever I said the VI, so I did a test VI (TimeTesting.vi) to determine where the problem came. In this special VI I record the execution time in a csv file to analyze then with excel.

  After several tries, I found that if I run this criterion VI with the while loop, execution on every cycle time increases, but if I remove the while loop and use the funtionnality "Continuous run", the execution time remains the same. In my high level application, I have while loops and events, and so the runtime increases too.

  I someone could explain to me why execution time increases and how can we avoid this? I have attached my VI test and the necessary subVIs, as well as an image of a graph that shows the execution time with a while loop and «run permanently»

  Thanks a lot for your help!

  Your SetReset_DO VI creates a channel whenever it is called.  And that you never delete a task.

  When running continuously, that it's as if it only runs once and LabVIEW has internal mechanisms to close references that will not be used again.  When a VI is used as a Subvi, LV does not know if she will be called again, and lacks these things until the first level VI stops. You have a memory leak.

  Just as you open and close your file outside the loop for, create your channel out of the loop.

  Lynn

• How can I recover the files deleted by Sync Center? I created files while offline connection, then when I am connected once again, they were deleted from my computer.

  I keep files synced between my laptop and our server using under Windows Sync Center.  Normally, this works very well.

  However, recently I did a lot of work so that offline and saved these files in the server folder synchronized (while offline).  I came back and unfortunately the entire folder that I had been synchronization had been moved and windows thought all my new files should be deleted and erased all!   How to make a comeback?

  They are not in my trash.  My guess is that they are locked in a temporary file.

  Help, please!

  Hi Olen Ronning,

  Thanks for posting on Microsoft Answers!

  Let us check if you have the folder (offline) is located here.
  1. open the control panel (all items view), and click the Sync Center icon.
  2. in the left pane, click Manage Offline files.
  3. on the general tab, click the view your offline files.
  4. you will now be in your offline files folder. Open the folder to the location you want to see these files available offline.
  5. for example, select the computers and a computer network available. You will now see the available offline folders and their files offline in them.

  Or

  If you work with offline files in different folders, you can see all the of them without having to open each file individually. Here's how to view all your files in one place offline:
  1. open offline files by clicking the Start button. In the search box, type and then offline files in the results list, click on manage offline files.
  2. on the general tab, click view your offline files.

  If you still can't find the brand of folder that you have enough disk space for offline files.
  And you can also view the folder on the server if it is updated with the latest files. because when you start windows updates the record with the most recent files.

  Manage disk space for offline files
  http://Windows.Microsoft.com/en-us/Windows7/manage-disk-space-for-offline-files

  With the help of added see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/working-with-network-files-when-you-are-offline
  http://Windows.Microsoft.com/en-us/Windows7/understanding-offline-files

  You will not delete files when you sync unless Sync Center tries to sync with a file that has been deleted. If you have set up a partnership of synchronization for synchronizing files in two different places (for example, between a computer and a mobile device), Sync Center will keep the same set of files in both places. If you add or update a file in one location, Sync Center also will add or update it in the other location. Similarly, if you delete a file in one location, Sync Center will delete it from the other location.

  Please let us know if this helps you resolve the problem or if assistance is needed.
  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• incompatible files with files on your system

  When you try to install KB960714 update for IE7 on Windows XP with SP2 or SP3 on Windows XP SP2 with IE7, I had a configuration error that says that the file I tried to install is incompatible with files on my system. What are the files that would be... SP2, Windows XP or IE7?

  Hello

  
  1. Once you get this error message?

  2. What is the full error message?

  3. have you installed new hardware or software before the show?

  4. are you able to install some other updates without any problems?

  5. who is the antivirus installed on the computer program?

  Method 1: Reset Windows update components and check
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2: Disable the anti-virus software if installed some and check.
  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 3:

  Try to upgrade to SP3 of XP and then try the installation again.

   

  How to get Windows XP Service Pack 3 (SP3)

  http://support.Microsoft.com/kb/322389 

   

   

  I suggest you provide more information about the issue so that we can better help you.
   
   
  I hope this helps.
   
   

• All of my 10-20 second mp4 to wmv (via FormatFactory) videos will be 1000 minutes s growing to record with WMM. Is this a common problem?

  All of my 10-20 second mp4 to wmv (via FormatFactory) videos will be 1000 minutes s growing to record with WMM. Is this a common problem? Help, please!

  This will happen if you add a single .wmv file converted to the timeline?

  Does make a difference if you are going to... Tools / Options /.
  Tab compatibility... and left click Restore all default settings?

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

  My O.S. is W.7. 32-bit.

  Before, I recently upgraded to XP and using MS Word 2007, I have a (short) Sound Clip of pre-registration<60 secs. )="" and="" then="" insert="" it="" into="" my="">

  A small icon that looks like a speaker appeared on the Document and that the beneficiary would have left click on it to hear the recording. The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

  Is this even possible or has Microsoft taken a step backward here?

  I'd appreciate some help here. Thanks in advance. Mech-Tech.

  Original title: Sound Recorder

  If I've understood your problem, try this. Create a shortcut to "soundrecorder /file outputfilename.wav" (without the quotes).

  Then start soundrecorder via this shortcut and start and stop the recording, it will save so (hopefully) as a wav as before.

  I think the problem is, W7 soundrecorder, by default, saves to wma.

  If not, try a 3rd free part program such as Audacity (which seems like overkill, but should do the job).

  I hope this will help.

• Problem when trying to watch a webinar recorded with Windows Media Player

  I get an error saying that Windows Media Player cannot play the file. A network firewall might prevent the player to open the file by using the UDP transport protocol. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:").  I'm watching a recorded webinar and may not have to work, can anyone help?

  Hi Flinnwin,

  Welcome to the Microsoft community. According to the description of the problem, you can't watch a webinar recorded with Windows Media Player. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the file format?

  I'll help you with this problem. I suggest you to run the Windows media player settings Troubleshooter.

  I hope this helps. Let us know if you need help with Windows.

• Only audio recording with TCS?

  Hello

  is it possible to record with an audio only TC?

  -I know that I could cut out the audio file for the video, but not what the customer wants to have

  -J' tried to create a new Configuration of the call, but it is not possible to deselect all video codecs

  any ideas?

  You mention not what revision of software your TCS runs, so unless it's something really old, then you can create a template with audio only, then create an alias using this model record.

  

  

  /Jens

• I opened my photos of my SDCard with File Explorer, select them all, then I select move to fill after that I saw the bar of loading with the green line. After that all my photos from my computer disappered and were removed from my SD card. Please, he

  I opened my photos of my SDCard with File Explorer, select them all, then I select move to fill after that I saw the bar of loading with the green line. After that all my photos from my computer disappered and were removed from my SD card. Help, please

  I looked everywere in my computer, but they are not found

  I bet that you have selected the folder Adobe Bridge CC or CS6, and it would be in there under Program Files/Adobe/or Program Files (x 86) / Adobe /.

  Move to... in the file Explorer apply only to records not the bridge program.

  You open Bridge and Photo Downloader allows you to move pictures from your SD card in the deck (also called import)

  Gene