Mix the ISE unit with VM appliance

Similar Questions

• Inspiron 7000 point 8.1: how to mix the mic input with audio from YouTube (for DIY karaoke)

  Hello

  I want to use my Inspiron 7000 (wIn 8.1) as DIY karaoke machine.  Maybe there's karaoke apps or software, but they are usually expensive and the choice of songs is limited while on the mountain, there are clips from karaoke practically for each song and I want to mix the audio with a microphone on my laptop.  How I can do and it is possible at all?  Is there another solution?  Is it possible to add a reverb effect to the microphone entry?

  Thanks for the ideas.

  Hello. The recording of the sound Properties tab and right-click on your PC to open the context menu, and then click Properties.

  

  In properties, select the listen check "listen to this device". That will make your input mic through your speakers set. If you get your comments, and then click the levels tab and turn down the mic gain.

  

  You cannot add reverb on the side of the entrance. You can try to add it to the reading. Open the playback of the sound properties. Right click on the speaker to open the context menu and then properties. In properties, click the enhancements tab, and see what you have there. Below is a screenshot of an old computer with Realtek.

  

  As you can see he has an accessory called 'Environment' with fanciful names for the different quantities & types of reverb. I don't know whether or not your Realtek driver has a similar improvement. If so, I don't know if it is applied to the mic 'listen' function. If it works it will apply to audio from youtube too.

  If you can not reverberation through the configuration of the Realtek driver, then another solution would be to use a multitrack recording as the free Audacity program. You can save the audio from youtube on a track and your voice on another, and then use the effects of reverberation in the program on your voice.

  This version of Realtek in the screenshot has a function called "voice cancellation". Its purpose is to try to eliminate the voice of a record so that any record can then be a karaoke. I tried it and it's impressive. On a recording where the voice is at the Center, he gets completely eliminated. If the voices are mixed in a different way then it does not. If you want to access the feature, but your version of Realtek does not have it, download the program Audacity - it has an effect like this. You can open a record in the program, and then apply the effect of karaoke recording to eliminate the voice if possible.

• How can I activate the "Host key" for my sftp to the ISE Server?

  Hello

  I can't copy my files to upgrade 1.2 ISE to my repositories the.

  Here is a cut and paste of my CLI on one of my knots ISE after attemtping to copy from my workstation (running a SFTP server) to one of my nodes of ISE.

  XXX-ise-01 / admin # s copyftp: / //ise-upgradebundle-1.1.x-a-disque 1.2.0.899.i386.tar.gz.:.

  User name: Admin

  Password:

  % ERROR: backup failed due to one of the following reasons

  1 host option key is not configured

  2. the host key is removed due to the new image

  3 host key is removed from any other depositary having same ip/hostname

  % Please reconfigure the host key option

  % Error: transfer not possible

  I don't have whatever it is configured with the option "host key.

  I googled and searched, but cannot find references limited to the "Host key" command within Cisco. I tried various forms of it on the ISE node with no luck.

  I tried an FTP transfer, but it does not work.

  Any ideas?

  You can try to add a repository to your local configuration as an sftp server that should start the process host key.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• Quickly, the HP Envy 110 unit with the Samsung tablet can be printed?

  Quickly, the HP Envy 110 unit with the Samsung tablet can be printed?

  Yes, assuming that you are referring to an Android table... If you are referring to Windows 8 tablet please specify.

  You can print via the local network using HP ePrint mobile app.

  Follow these guidelines to learn more about installation and usage of the app:

  http://support.HP.com/us-en/document/c01616126

  In addition you can also scan your Tablet using the HP printer control application:

  http://support.HP.com/us-en/document/c03561640

  Shlomi

• Air 1131AG - cannot access the unit with http

  I just bought two 1131AG and am not able to access the unit with Internet Explorer.

  The two units Gets an IP address from my DHCP server and not to ping requests. Unfortunately, 21, 80, and 443 ports are not open and IPSU Cisco sees not the device either.

  The fact that I have two new units that have exactly the same problem makes me think I'm doing something wrong.

  I also have access to the consoles.

  Thanks in advance.

  Based on the number of your room, you have just taken delivery of the Lightweight Access Point. You need to convert the LWAP in standalone (if that is your intention).

  Convert a standalone Lightweight Access Point

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

  Click on the link above and the procedure you're looking for is under the heading "Using a TFTP Server to return to a previous version".

  Good luck.

  Please rate when useful and/or there is. Thank you.

• Secondary ISE cannot join the head node with error message

  Hello

  I just installed the secondary ISE and made the following points, but when I try to reach the head node, I received the cannot authenticate the primary ISE, please check the server or the certificate and try again.

  -promote the secondary image of autonomous primary

  -export the seconary cert self

  -import the cert in primary school

  -try to add not on the used secondary IP and host with super admin user name

  I noticed one thing that instruction on the ISE 1.1.1 import cert on mentioned primary section:

  1. Choose Administration > system > certificates.
  2. In operations of certificate on the left navigation pane, click certificate authority certificates.

  but there is no certificate authority certificates in the left pane. I chose to store the certificates instead

  

  any suggestions?

  Hello

  Did you put the primary secondary node? You tried to save the node in the wrong direction. To register with the primary node of a node, the application for registration must be initiated from the primary node.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?

  Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?  How about studio flashes (Alien Bees)? I just sold my Canon gear and moved to Sony, but I need advice on how to trigger wireless flashes.  Thanks for any help you can provide.

  Larry

  LarryMarshall, Any Trigger of manual Radio should work.  Assistants of pocket or RadioPoppers.

  But there are a few problems with the 60 m.

  (1) it doesn't have a PC or a 1/8 port to connect directly to a Rec Radio of any brand.

  (2) you WILL NEED to buy or use a hot shoe with a PORT adapter... 1/8 according to the sync cable or PC you may already own.

  (3) you WILL NEED to 'Check' to 'ensure' that trigger the 60 m SHAFT is aligned with the center of contact your hotshoe adapter hot with a PORT... because some adapters won't online upward with the 60 m Flash... who fooled you into believing that it does not work.  When, in fact, it's just the PIN which is not aligning with ALL the hot shoe adapters.

  It will work... you just have to be careful... and know of the gatcha.

  The 60 m PUT claw is not fully compatible with all... hot shoe adapters and there that to do with how PUT 60 m flash foot aligns the trigger ROD.

  I triggered the 60 m in flash with RadioPoppers... in the manual... so, I know it works.

  It is, manual release of the waste of the 60 m flash TTL/HSS abilitys.    What is needed is for SONY to develop and deliver a Radio trigger Solution.  Which would be TTL/HSS and you allow to 'Control' the Flash too... from the camera.

  It is the power of a Flash of modern Radio System.

  Manual triggers are old school.

  p.s. the A7r/A7 can easily trigger flashes of Studio with Pocket Wizzards or RadioPoppers... or probably triggers of manual.    Just be careful if the brand you choose is reliable.

  Pocket wizzards and RadioPoppers were the choice of PRO for years.  Because they are reliable.

• Help with comparisons between the work units in the base line

  P6v7 running, I have a base calendar to resources and I want to see the work units of base from the current hourly work units. I go to the spreadsheet of the use of resources and discover real work, budgeted and other units, but I don't have the option to display the basic units. I first thought the budgeted units were the base line reading, but it is not true that the planned duration does not match the unit duration of work budgeted for each particular activity or it corresponds to the duration of the current activity. Don't know what the length of buget reads from.
  
  I found that I can use the activity using profile window to display units of basic work compared to the real and remains as a histogram, but not in a spreadsheet format.
  
  Does anyone know how to check the times of the base line in the format of the worksheet?
  
  Thank you

  user12850365,

  I occasionally use resource and activity of histograms with spreadsheets. After reading your question, I decided to change my own setup and launch a scenario similar to what you're asking and got positive results.

  First of all, I guess a few things...
  * You already have a reference assigned to your project database
  * You are viewing the 'use spreadsheet activity' on the bottom of your screen

  First thing to do is to filter your activities within the project,

  * Group and sort * by 'Total' and show subtotals and totals
  Side to the left of the screen... Display ""BL project Labor units * "and" * budgeted Labor units * "columns on the left side of your screen"
  * To the right of the screen... (The custom Spreadsheet fields) displays budgeted Cum Labor units and Cum BL project Labor
  * My time scale is set to days and weeks

  Adjust your timescale to allow all of your data to display. You will thus limit much of your future data on the screen.

  This should display the two hours provided for in the budget and hours of departure within the spreasheet

  I would like to know if it works for you.

  Hope this helps you

• Check the ISE for the VPN Cisco posture

  Hello community,

  first of all thank you for taking the time to read my post. I have a deployment in which requires the characteristic posture of controls for machines of VPN Cisco ISE. I know that logically once a machine on the LAN, Cisco ISE can detect and apply controls posture on clients with the Anyconnect agent but what about VPN machines? The VPN will end via a VPN concentrator, which then connects to an ASA5555X that is deployed as an IPS only. Are there clues to this?

  Thank you!

  The Cisco ASA Version 9.2.1 supports the change in RADIUS authorization (CoA) (RFC 5176). This allows for the gesticulations of users against the ISE Cisco VPN without the need of an IPN. Once a VPN user connects, the ASA redirects web traffic to the LSE, where the user is configured with a Network Admission Control (NAC) or Web Agent. The agent performs specific controls on the user's computer to determine its conformity against one together configured posture rules, such as the rules of operating system (OS) patches, AntiVirus, registry, Application, or Service.

  The posture validation results are then sent to the ISE. If the machine is considered the complaint, then the ISE can send a RADIUS CoA to the ASA with the new set of authorization policies. After validation of the successful posture and CoA, the user is allowed to access internal resources.

  http://www.Cisco.com/c/en/us/support/docs/security/Adaptive-Security-Appliance-ASA-software/117693-configure-ASA-00.html

• How to change the sound unit?

  In IE 10 I right click the speaker icon to change the sound unit, which doesn't seem to work the same way with Mozilla?
  How can I change my his outside post?

  Firefox defaults to the audio of the computer that you are using it from.
  If you have more problems with this, the following article will help solve problems.
  Difficulty common audio and video questions

• I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  and when I go to install the mac lion antiracism apple with reticle logo means error

  what can I do with these

  Please help money

  You can get the replacement system install & Restore CD/DVD of the customer support of Apple - to the United States, (800) 767-2775-for a sum low S & h. you will need to have the model or the serial number of your Mac available.

  If you are not in the United States, you may need to go through the regional Apple Store that serves your location to find the phone number. Here is a list of links to all - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html , another resource: International Support Phone #s.

  

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• New iMac, can enter the fuser unit 1 TB

  Thanks to a grant, I recently acquired an iMac for my Orchestra class. Because I intend to store videos of students playing their instruments, I went with the upgrade to a fusion of 1 TB drive. Our school district allows music classes to have Apple laptops rather than the standard Dell computers, however our technology on-site host has no idea what she does when she looks like a mac.

  My problem? Everything is by default on the 24 GB hard drive. Because of the way these Macs are locked, I can't move anything in the drive of fusion of 1 TB without an administrator password.

  I would like if possible to change so that everything automatically by default on the merger of 1 TB drive. Is this possible? Could walk a person non-Mac through the steps to get there?

  Thanks in advance.

  Leave it alone and don't try to substitute the default values. The fuser unit is called a Fusion player for some reason, the two are merged with the software and will appear as a drive. If you have crushed you will need to consider in an Apple Store for repair.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar