MMIC UCS C200 M2 blade - cannot access

Hi all

I was hoping someone in this forum could help with a problem I have on a customer site. We have therefore two blades UCS C200 M2 we cannot access MMIC of. When I try to reach the IP address, the browser just sits there, but the IP address is an echo request ICMP who responded. I rebooted a systems press F2 and tried to launch the utility BIOS Setup MMIC but received a message "no attention not found" and the only option was to hit very well.

What would cause this? And should I update the firmware? If I need to update the firmware how can I go about this...?

In addition, these systems are running ESXi 4.1, but I believe that the version of VMware is not compatible. Could someone help me confirm this?

Any help is greatly appreciated!

-Bobby

Hello

It worked before?

If this is not the case, try resetting the MMIC or it could be a browser/java problem too. The problem exists across the browser and several pc user.

See doc below to configure the Mmic

http://www.Cisco.com/c/en/us/support/docs/servers-unified-computing/UCS-...

http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/c/SW/CLI/CONF...

-
Siva

Tags: Cisco DataCenter

Similar Questions

  • UCS C200 and NIC Teaming/FailOver

    As UCS C200 with management of a 10/100 and 10/100/two interface 1000 interfaces and PCIe with 4NIC

    I want to install CUCM 8.5 is the NIC Teaming/failover supported by UCS C200 and how to set up the NIC Managment interface with failover?

    Thank you.

    Hello

    As you install apps from the CPU on the server of the UCS, speech application team listed their recommendations here.

    http://docwiki.Cisco.com/wiki/QoS_Design_Considerations_for_Virtual_UC_with_UCS#Guidelines_for_Physical_LAN_Links.2C_Trunking_and_Traffic_Sizing

    You can create a NIC teaming in the ESXi via vSphere client software for traffic from from / destined for virtual machines.

    For C200, we have only one management port and if you use the management for MMIC traffic port, switch option is not available.

    However, if you choose to use host for MMIC traffic NETWORK ports, you can set up CIMC NIC mode for 'LOM shared' which provides the NIC teaming options.

    http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/SW/GUI/config/Guide/1.4.1/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_141_chapter_01000.html#concept_AC4EC4E9FA3F4536A26BAD49734F23D0

    HTH

    Padma

  • CISCO UCS C200 M2 amber display clear on mem and warning

    Hello

    My company bought 5 units of CISCO UCS C200 M2. The servers are equipped with 2 x 6 core 2.67 GHz. The server was also equipped with 32 GB of ram. One of the shows Server alert light yellow on mem and warning on the front panel. Can someone tell what could possibly cause this problem?

    Thank you

    Logan

    Hi Steve,.

    There could be a faulty MEMORY Strip on the system, in the MMIC, you can check the logs SALT (System event log) that will provide you with more details.

    I give advice you open a TAC case for this, we can take a look at the tech show and understand why accurate and if necessary replace the defective DIMM module / part (if defective).

    Thank you!

    . / Afonso

  • Replacing hard drive RAID 10 (UCS-C200-M2)

    Guys,

    I'm running RAID10 on UCS C200 M2 and exchanged one of the defective drive.

    Currently, there is beep for more than 12 hours and I guess that the new drive is under reconstruction at the moment.

    In addition, physical drive status is currently on "not well configured" on CIMC. The status changes to "online" after

    the reconstruction end? Will be required reboot when the rebuild is complete?

    Please advice.

    Hello

    If the State of the reader to not configured well. You will need access to the Webbios to change online status and allow reconstruction to be undertaken.

    You will find here all the information required to set the drive to the State once again

    http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/c/SW/RAID/con...

    If by chance you encounter any problem do such thing. Call the TAC and they will help out you with it.

    Please note ALL useful answers

  • Cannot access page Plugin-based PDB (protein Data Base)

    OS: MacOS Yosemite 10.10.3. Cannot access the http://www.callutheran.edu/Academic_P.../lzipmast.htm Web page that uses a plugin of the PDB. I don't know if there are plugins for this format (s?), in FireFox, or anything else besides. Safari reports that "the sype file not specified", so maybe there is a mistake in the Web page itself (humor: "these biologists are sloppy with their microscopes to $5 million and more, but they don't know much about computers..")

    This page has not been modified since before that Firefox is a browser. There is probably a plugin for Internet Explorer v6 that will display that content. But you'll need a computer with Windows XP SP1 which is never updated Internet Explorer, and then find and install the plugin to make it work.

    You can download the file directly, if you want to try to find a program that will open its doors this: http://www.callutheran.edu/Academic_Programs/Departments/BioDev/omm/lzipper/pdbs/lzipdna1.pdb

  • Firefox starts, but cannot access any website.same issue is experienced with Chrome, not Explorer

    Hello, I have a problem with surfing with Firefox. The browser starts but cannot access any Web site. The same question is experienced with Google Chrome. However, Internet Explorer works smoothly. Thank you

    Some problems occurs when your Internet security program has been implemented.
    trust the previous version of Firefox, but not more acknowledges your
    update as being approved. Now how do I solve the problem: to allow
    Firefox to connect to the Internet

    • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
    • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

    Configure the firewall so that Firefox can access the Internet. {web link}

  • TypeError: Error #1009: cannot access a property or method of a null object reference?

    Mr President.
    I updated firefox and always this type of problem
    every time I tried to open the flash game site iam getting this question. sometimes IE browser cannot open it too much.
    "".... TypeError: Error #1009: cannot access a property or method of a null object reference.
    to ASGames / fun_Menu)
    to ASGames / frame2)
    at flash.display::MovieClip/gotoAndStop()
    to WeddingTianaDressup_fla::Timeline_102 / playGames ()... » »

    but the same site can be opened in other browsers in the same pc... but the same site a user goes to another computer on the browser firefox itself. How do not know where is the problem... ?
    so please, some can help hu?

    Dear Sir.
    Thanks for your answer...! I did what you said but it doesn't work. new iam having the same problem...!

  • cannot access the internet after upgrading to firefox 30.0 on windows 7

    After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista

    Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.

  • Cannot access Firefox shows the missing profile or inaccessible is there an easy solution?

    cannot access Firefox shows the missing profile or unreachable is there a solution I'm not a computer expert

    Hello d2burnett, tryp press windows key + R and open %appdata%\Mozilla\Firefox\ - then rename the file called profiles.ini to something like oldprofiles.ini...

  • Facebook cannot access the photo library

    When I try (on a Macbook Pro) 'create album' or 'add photos' on the women's FB page, I can see, but cannot access its photo library.  Why?  I can, however, access the photos directory - unfortunately, uses Photo pictures are not stored there.   Apple told me that they no longer support iPhoto, but were instead switching to 'Photos '.  So that's where all the images are imported from the camera.  WTH?  It shouldn't be this difficult.

    When you use a web browser or any other application that uses the media browser, you can access your own library of Photos of system, but not of other libraries of Photos.  Only libraries can be designated as the library of the system at the same time.

    The photo library of the system will be available from the sidebar of the selector Panel of file like this:

  • has sent that a gift of music to a friend in france Spain and friend album cannot access the gift

    Hi, I bought an album in itunes with a french account and sent to a friend with a Spanish account. It cannot access my gift.

    Generally gifts iTunes Store cannot be exchanged outside the country of issue.  Have your friend return the gift.

    iTunes: send gifts iTunes - http://support.apple.com/HT201783 - 'learning to send gifts iTunes from the iTunes Store, iBooks Store and App Store. In the iTunes Store, you can offer an amount in dollars or pounds, audio books, music, movies, TV shows or applications on your iPhone, iPod touch, iPad, Mac or PC. »

    "When you buy a gift from iTunes, you must have a credit card valid at the folder; You cannot buy an iTunes gift with in-store credit. If you use the sharing of family and ask to buy is activated on your account, you are unable to buy gifts. You cannot redeem gifts purchased outside the country of purchase. For example, an iTunes gift bought in France cannot be exchanged outside the France iTunes store. You can contact the Apple Support to cancel an iTunes gift until two days before the scheduled delivery. »

  • Cannot access my Comcast mail since the last update. I can access it from Safari and Microsoft Windows, but generally do not either of these browsers use

    Cannot access my Comcast mail since the last update. I can access it from Safari and Microsoft Windows, but generally do not use either of these browsers. I chatted with Comcast and they are the ones who asked me to try to gain access to other browsers. And, as noted, I managed. Only my opening my email to Comcast.net inhibits the Firefox, the browser that I use on a regular basis because of this problem I can't use Firefox.

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

  • 10 Windows cannot access ipod

    I recently used my pc to sync my ipod, upgraded to Win 10 and now the pc does not recognize the ipod, it says that the ipod is corrupted. Can I use the ipod, and I can use it in my car via USB.  Clearly, it's Windows 10.  I connect and get this message: "there is a problem with this drive, can and difficulty now ' when I tell Windows to analyze and correct, I get another message that says:" this disk check cannot be performed because Windows cannot access disc.  If I opened my file Explorer, then plug it in, I see pop up (the full name of it) and after 2 seconds, the screen to explore closes.  Can anyone help or is it just being a fascist again Microsoft?

    First of all, try this procedure to restart the Apple Mobile Device Service

    Restart the Service of Mobile Apple (AMDS) device on Windows - Apple Support

    If this does not help, you can completely remove iTunes and software components.  This Apple document lists all the components of an installation of iTunes and the precise order to uninstall

    Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

    Then, download and install the latest version of iTunes

    http://www.Apple.com/iTunes/

  • Error: cannot access dead object

    [JavaScript application] Error: cannot access dead object.

    This message appears repeatedly after using Gmail, sign out, close the tab, then open a new tab.

    Uploadd disabling Drag & Drop appeared to be... on my 7 machine. Now for my Vista laptop. Thank you.

  • Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail.

    Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail. I tried to clear the cache and restart Firefox, but I still cannot use Hotmail.

    Not this problem when I go to Internet Explorer.

    Hello, it was noted that the foxit pdf plugin is causing this issue. You can disable this plugin in firefox > addons > plugin until what foxit offers a patch/update for the plugin.

Maybe you are looking for

  • Due to the high volume of photos low disk space

    Hello guys! I have the following problem. Even though I have something rolling around 9 photos in my camera, the menu for use in the workplace shows that my photos and movies are more than 3, 5 GB - I do not use the photo stream, I deleted photos fro

  • Win 8 - Photosmart c4580 not scan with HP Solution Center lack wifi

    HP Photosmart c4580 8 64-bit Windows My printer is Photosmart c4580, and I have Windows 8 64-bit operating system. I can print throw my wi - fi connection, but I can't scan. If I want to analyze I need to plug the usb cable (10 meters long, because t

  • I have works suite 2005-but my laptop does not read so good

    but my laptop does not read if good, Cd is in gd condition, how can I get better results when need to use it?

  • error code 80070005 cannot get updates.

    I have SP2 installed I tried reinstall received the error that the SP1 is not installed. I tried re - install SP1, received the error all ready installed. Do not know what is going on can anyone help? My update log shows that I've never had updates.

  • HP2000 portable 2b44dx: videos its ok, the screen is green

    When I try to run any video, IE Netflix, youtube, news stories etc. sound is played, but the area of the screen which should show the video is of a bright green. All the other features seem ok. I think I can miss an update Thanks for any help