Mobile data in stamina mode problem

Similar Questions

• Deactivation of mobile data in flight mode.

  Hello.

  I have an iPhone with iOS 9.3.1 6 and I try to turn off mobile data when the phone is in flight mode or with the SIM card removed. No idea how to do it?

  Kind regards

  There is nothing to turn off.  If the device is in airplane mode, all the radio are switched off voltage, therefore no data or voice at all connections.  Similarly, if you remove the SIM card, it cannot be any cellular connection at all, so nothing to turn off in what concerns cellular data (or voice).  With the SIM card, wifi could still be used if there is a network in range.  But with wifi off and the SIM card on, once again, there is no possible connection data of any kind.

• Stamina mode

  Whenever I put on her stamina mode does not work and is not disable the stream please notify

  If the data is not disabled after 15 minutes (after endurance comes into play), you should try this: first of all, make sure it is off, then go to settings-apps-all, do scroll down to stamina. Force shutdown, and erase the data. Restart your device.

  Also, see this:

  https://talk.sonymobile.com/T5/Xperia-Z3-Z3-dual/problem-of-mobile-data-in-stamina-mode/m-p/942095#M...

• mobile data

  My g4plus does not connect to the mobile data network.

  What could be the problem?

  Please suggest?

  Hi, I had a similar problem. even when running mobile data, I was not connected to internet SIM. Finally, I found the problem.

  my phone was roaming. and there is a setting that example, if mobile data roaming be able or not. mine has been disabled. I activated the mobile data roaming, and the problem was solved.

• Data connection keeps disappearing in Stamina mode

  I'm in the United Kingdom on the three network. I use Stamina mode with extended use enabled to save energy, but I see a consistent question when, after an hour or two, the phone completely loses his mobile data connection and does not restore without having to reboot. This makes Stamina mode completely useless because is not reconnected when the screen is turned on.

  The signal on the phone indicator shows no symbol 'H' when this happens, even a few-> status means HSPA is present but are disconnected mobile data.

  I have the latest firmware installed.

  Try resetting the endurance like this: first of all turn off, after which go to controller settings-applications-all-eco mode, forcing clear data and stops. Restart your device and check again.

• I have problem with my Mobile data

  I am using Lenovo X 2 - AP

  and I've updated for android to these daily 5.0 version

  (why, I don't have internet or ADSL I have update my mobile data, I download update on yesterday and install the update on this morning (GMT + 7))

  Everything works fine.

  Then I try to update my applications.

  The problem starts at these points, while I update my apps

  Some applications can't be updated due without internet connection

  but there are always 4G icon on mobile data in the top left

  so I order my internet connection using facebook or chrome applications

  and I found my dose of mobile data does not

  If I try to use USB Personal Hotspot and I found that my mobile data can share in my computer

  but I don't know why I can't use my mobile data on my phone

  Sorry for my bad English skills

  I hope you guys can help

  Thank you

  OK everythings fine now

  I factory reset my phone and it is working

  Thank you

• airplane mode disables mobile data.

  I realized on my mobile that, once I have activate airplane with mobile data mode, it is not turn off mobile data.

  It is always on wifi turns off.

  If there is a way to disable mobile data automatically with the airplane mode?

  Yes, I had there.

  It is the nature of Android itself and as I said, when you switch to airplane Mode, the Mobile data is indeed disabled but not to the OFF position.

  Hope that clarifies everything!

• ENDURANCE (?) mode problem

  Good evening.
  You see, I have this situation past that I don't know if its normal behavior or it is a problem. Allow me to explain.

  About 3 weeks (when I bought my z3c) battery level widget (built in) told me that I had about 4 days of battery charge on stamina mode when the battery was at 100% charge. When he was at 14%, I decided to load, but when he reached 100% again, the widget then told me that I had only 24 hours of battery charge. At that time maybe there behavior was normal, given that all the software that I installed (Launcher, screen lock, etc.) was huge amounts of battery drain. So I uninstalled all my software (essentially leaving the phone in a factory State) and still the widget told me that I had only 24 hours to charge the battery to 100%. So I decided to do a complete factory reset and this is when the phone was 100% the widget told me I had about 4 days of battery charge.

  Now in this cycle, I decide to install all my software again (although always at 100% and connected to the charger) beign great attention to the what applications could be the culprits of last time behavior (I decided to leave out launchers and lockscreens). Once I finished (still at 100%), the battery widget still told me I had 4 days of battery, so I concluded that the launcher and the lockscreen was playing with battery levels. So, I unplugged it and start using it until it reaches 14 percent once again. I load it again at 100% to see the widget tells me I had about 24 hours to charge the battery (Yes, the same problem that I had before). I might mention here that in this cycle, mobile data, location services and 4g where listening to the coast.

  Frustrated, like there is no tomorrow, I decide to do a last experiment and try to understand what that would that be the problem. New, I reset my phone to a factory State, and I leave without apps, only those built in. And yet once, at 100% the widget told me I had 4 days of charge of the battery and when I re - load to 100%, the widget tells me that I have 24 hours of battery.

  Can someone tell me whats going on? What I'm missing here? What could be the problem? How should I do?
  Thank you very much for your time.

  The widget is an estimate and is based on your consumption on all about 2 or 3 days from the same amount of days before - so in the present, you are a user of light so the widget would not say what he gives before days however to say 2 days time now what you were doing now will be considered as your time now ,

  Confusion of sounds

• The roaming and mobile data

  I have an iPhone 5 c. When traveling abroad, I delete mobile data and precariousness. In this case, I don't have any data, but the company phone bill me because he says that he has small connections. Could you tell me how to solve this problem?

  What do you mean by "roaming", internet?

  I would suggest turning point first and then airplane mode turn on Wi - Fi. With this configuration, you don't have data problems and must be always able to reach sensitive areas.

• Windows 7 Pro x 64 does not detect HP Mobile Data Protection Sensor (accelerometer)

  Hello.

  I installed win7pro x 64 yesterday and already fallen on a serious problem, which is how I use the laptop a little dangerous for my valuable data.

  When I was working on HP Vista 32 bit (of the partition recovery etc.) brand, it was a device called the HP Mobile Data Protection with HP ProtectSmart software sensor (or protect Smart). In other words, the accelerometer HDD which parks the HARD drive heads when it "feels" it is down or something and the software for it. It has worked flawlessly.

  
  

  Until I decided to install Win7... And then, surprisingly, after failure of driver install and take a look in the Device Manager, I have noticed that there is no such device. I checked three times, looked at property of each device, even reinstalled Vista 32bits back - he has shown again - and installed Win7 - not detected again. There is nothing that has the HPQ004 device ID! I remember people saying that after that fresh Windows installed, there are 6 unknown devices or more. I got only 5. [Device fingerprinting, 3 x MemCard player and IR receiver]. There is no accelerometer... Also, when I try to install the drivers/software, windows appears:

  ProtectSmart Hard Drive Protection: with the text Property.AccelerometerNotPresent

  and then another saying something like features were not installed due to wrong installation or not supported feature.

  So now I'm stuck with a laptop it is dangerous to travel with, because the disk is no longer protected

  I have already installed all the drivers available on the HP page, even downloaded those newer Intel (chipset) etc.

  Is there a solution to this? Has anyone else encountered this problem?

  Windows 7 is officially released and available in RTM version, not beta, so I think that HP should open support in his favor and release new drivers for win7! And above all, to solve this problem...

  If anyone is interested, this problem is solved now.

  Just download the new drivers from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 3744188 & swItem = ob-76187-1 & mode = 4 & idx = 2, install and make sure you have the latest version of the BIOS. Tested - heads are being finally parked! Yay!

• Failure with stamina mode after upgrading to android lollipop

  Hello

  I have a failure with the endurance mode after upgrade to android lollipop

  My wifi connections and mobile data are still active and which reduces the life of my battery

  How can I solve this problem? Should I reinstall android kitkat?

  Thank you

  You can try this: first turn off the endurance, after go settings-applications-all, scroll to endurance app and force clear data, and stop. Turn it back on.

• location using mobile data instead of wifi

  Hello
  I have this problem in my z2. My position is automatically enabled & it cost me in data costs mobile even if I use a Wi - Fi connection only... Mobile data are off. I see this msg of deduction of money after every few mins .i do not understand this. Please help me.

  I have transformed location for battery saving mode & received no data so far use msg. I think it works. GPS was the origin of the problem. I kept it on the Wi - Fi & mobile networks only. No GPS

• Xperia Z2: Stamina mode does not aparently

  Hello

  Endurance mode does not work on my phone aparently. I have try all configurations, but the sotware disable wifi and mobile data operator when I block, or turn off the camera screen. I continue to receive information from applications and I did not any exception on the configuration of the endurance. Any idea to solve this problem?

  Hello.. To do this
  Go to settings
  Apps-> all-> the controller in eco mode
  And empty the cache and data... Before you click on stop and restart your phone... It should work

• Unable to connect to the selected Mobile Data Service, please try again later.

  Dear all,

  I downloaded Blackberry email and MDS Services 4.1.4 and the Blackberry 9630 Simulator Simulator. I'm testing a blackberry asp.net application I have running on a test server using the blackberry Simulator.

  I have windows XP box. When I try to run the SDM Service, it runs without error, but acquire it on the site - http://www.blackberry.com/go/mobile - error saying above message - unable to connect to the selected Mobile Data Service, please try again later. How can I solve this problem, I tried to use full qualified names in the config file.

  Any ideas?

  NAV.

  Hi Nav, thanks for your message.

  When you use the BlackBerry 9630 Smartphone Simulator, you may need to change its default connection settings in order to provide network connectivity.  The reason why because the 9630, being a world phone, supports different types of network technologies and a configuration change may be needed to make it work with the MDS Simulator - CS.

  1. from the home screen, click the 'manage connections '.

  2. a popup window opens, select "Mobile Network Options '.

  3. in the options screen, ensure that the following field values are defined:

  • Data services = 'On '.
  • Network selection mode = "auto".
  • Technology network = "1XEV".

  4. close the 'mobile network options' screen to save the changes

  9630 smartphone Simulator should now have network connectivity.

  Sincerely,

  Adam

• iPhone 5 battery runs very quickly when using mobile data

  When I use mobile data on my iPhone 5, the battery seems to run out quickly. When I say fast, I mean very quickly, it will drop 100% completely dead in 20 minutes. What I do when I use mobile data is send some Snapchats and that's all. I left mobile data on, I have it on when I need to use it. I tried using mobile data for other things, and the same thing happens. Sometimes the phone will completely die to about 40% of the battery being left. I am almost convinced that I need at this point a new battery for my phone. Finally, I want to mention that these problems don't happen when you use mobile data, WiFi. Does anyone have any suggestions?

  iOS: version 9.0.2

  See the following article:

  https://www.Apple.com/support/iPhone5-battery/

  In addition, download the app from the battery life and see what it says about the health of your battery.