Mobile network appears no not after the update of Marshmallow

Similar Questions

• Manager application Adobe appears no not after effects update.

  I have IMAC with 8 GB of ram and processor Intel I5.
  I'm trying to update after effects from13.5.0.347 by but my Adobe application manager does not show the update for the legacy yet I scored in it for the highest priority. (or whatever he calls)

  Thanks in advance for the help.

  Please see:20141 App updates not showing upward into the clouds Creative

  Updates in the cloud do not appear to be available (body)

  I hope this helps.

  Greetings

  Megha Rawat

• Mac stops do not after the update of the sierra

  I've updated my MacBook Air (13 inches early 2015) to Sierra. After the update, it is not shut down or restart. If I click on stop, my screen goes black and the keyboard backlight is on. The judgment never ends. Its the same case on reboot too.

  Help, please. Thank you.

  Although this will help, but I have also reported this problem, like many other people:

  MacBook Air shutdown correctly

  macOS Sierra presents a serious problem that must be dealt with quickly

  Apple should give a direct response to this because it is obviously not an isolated incident.

• Names of the fonts appears only not with the update

  I have a Mac and recently updated my system to El Capitan 10.11.5. I have Adobe Illustrator CS5.1. Since the update, the type face names do not appear on the character Panel. Now what you see is the true type symbol or an "o". How to restore the names of the faces to the drop-down list character Panel? Thank you.

  Go to System Preferences > accessibility > display and check the box that says reduce transparency.

• Performance overview tables appears no not after the upgrade...

  After the upgrade to vcenter, the overview of the performance does not appear?

  see this KB

  http://KB.VMware.com/kb/1008330

• Captioning appears no not after the first

  Try cc for the first time. I added a CC object and added a few legends of the sample. One looks fine in preview, but later have problems. I got a screenshot of the configuration...

  

  Note that the previews of the 2 and 3 are empty. I checked three times and the text isn't black.

  No caption 2 or 3 appear when the timeline scrub or play the preview. I tried to make everything, but no change. I had a test configuration different last night where #3 would appear for every 1.5 seconds, then all but the last line would disappear for half a second, then it would also disappear. In this configuration, sometimes rendering would appear but not often.

  Is there something about CC setting that I don't understand?

  Using of 2015.0.Release, although similar problems appeared when I tried the same thing with 7.2.2

  Each caption line is no longer than 32 characters, including spaces - max quantity of lines, by block, 4

  You can go here too, for more questions legend:

  Adobe Premiere Pro help. Working with captions

• Skype logging does not after the update: no connection?

  Same question but Skype update itself and after that do so won't save as it says no connection... and Yes, I have a great connection... sigh...

  This message was transferred from its previous location to create his own new topic here; his subject and/or the title has been changed to differentiate the position of other requests for information and to reflect the content of the post. A link to this message appears when the post was initially added.

  I think that Skype will not often connect after update, goes just round.

  I right-click on the icon menu, I chose to LEAVE SKYPE.

  I then open Skype again and it connects without problems,

  Quirky, but true!

• normal flash camera does not work after the update of Marshmallow to lenovo turned vibe

  after update of lenovo vibe turned 6.0 when open fash normal camera does not work and I can't do it open or closed or outomatic is disable

  but when open video camera flash is working and also with any another application to camera is working normally

  How can fix this?

  reset the camera settings after Flash open ligt

• BlackBerry Smartphones BLACKBERRY APP WORLD ICON doesn't APPEARS DO NOT AFTER the upgrade!

  I upgraded my Blackberry App world, last night and the icon does not appear in the list, tried to download it via different modes but it doesnot anything on the contrary he says: "sorry, your session has expired. "Please close all your browser windiws and then return to the home page to start over.

  nothing happens pls help!

  I would say this:
  Go to Options > device > advanced > Applications then highlight the AppWorld application IF it shows up as installed and do not click it, just scroll to it. Click Menu > delete and remove the application.

  Now, do a restart: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.

  Finally, use your BlackBerry browser to go to the www.blackberry.com/appworld and download/install again.
  After installation and restarting possibly another, check your download folder or other frolders of application.

• Paragraph breaks appears no not after the publication of site

  I just released updates to the site of the client, and on one of the pages, none of the paragraph breaks are appearing (they had been there all along, above). Now, the page is a long paragraph.

  Why this is happening and how to fix it? It looks like an editing glitch...?

  The page in question...

  Whispering Waters testimonies | Effective, safe and gentle acupuncture

  Hi Bryan,.

  Judging by the HTML, it seems that Muse has improperly promoted the character style 'Italic testimony' at the paragraph level. Character styles are for strings of text (i.e., spans) within paragraphs. Recently, I saw another case of this kind in the paragraph Styles not export properly

  In all cases, you try some of these workarounds:

  1 put the style of character to 'None', then reapply "Italic Testimonal"

  or

  2 remove the 'Italics Testimonal' link (using the button 'Delete' in the character Styles Panel)

  If no help, please send your .muse file to [email protected] with a link to this thread and 'ATTN:Abhishek' in the subject.

  Thank you

  Abhishek

• Satellite M60 is beginning not after the update of the BIOS through windows

  Hi all

  I was updating my bios on my M60 with the latest version of the bios and I was following the windows flashing procedure (the recommended) and it blue screened and dumped. Now, the laptop does not start, wont even post. Just a big dead brick :(

  I am pretty competent with material (I'm a software engineer), but I don't know how to reflash a laptop when this kind of thing happens. Is there a trigger bios reset on board? Can I do it myself? If I take this back to my dealer how likely they can reflash the bios in the House do? (Its a pretty major dealer of the Toronto area)

  What is a work system that I need the solution that has the smallest impact of time - cost isn't too important an issue.

  Any help would be great,

  Thanks in advance.

  Hello Kristan

  According to the description of your problem, I guess that the BIOS chip is damaged and unfortunately you can not do much alone. Please contact the Toshiba service and explain the situation. They will explain everything you need to know and you can talk with them about costs and the time they need for the repair of laptops.

  Good bye

• Digitizer does not, after the update to windows 8

  Hello

  I bought myself a x 201 tablet a few months back, because I thought it would be great for taking notes during my studies. And I was right

  But after I upgraded my windows 7 to windows 8 when it was released last Friday, my scanner will not work correctly. It seems that the stylus is not really recognised as a pen. There is no pressure at all sensitivity, and clear with the back of it does not work either. It seems the wacom drivers aren't there.

  I tried to download various drivers for it and set up of the digitizer, but nothing seems to do the trick.

  Hope someone can help me, because I really need to be able to take digital notes soon.

  Back to the page of Wacom and download the scanner driver:

  http://www.Wacom.com/en/support/drivers

  Select tabletpc and win 7.

• Page of developer apex 4.2 not appearing is not after the installation of more than 10g

  Hello
  
  If by chance it crashed my Win XP OS. Yes, it is the portable desktop and I can't upgrade the OS for now. In any case, I had the whole machine reconfigured and installed 10 g which was version 2.1 and everything was fine. Earlier, I was running apex 4.1.1. I couldn't find the installation on the site of oracle, so I downloaded apex 4.2 and ran the installation according to the page
  
  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/upgrade-Apex-for-XE-154969.html
  
  Everything went through properly except for step
  
  5 log in to SQL * more (as above) and load the images:
  
  SQL > @apxldimg.sql APEX_HOME
  
  [Note: APEX_HOME is the directory that you specified during the have decompressed the file.] For example, under Windows "C:\". ».]
  
  where it asked me to enter the directory and I walked into C:\
  
  This is what happened
  
  SQL > @apxldimg.sql
  
  PL/SQL procedure successfully completed.
  
  Enter the value 1: C:\
  old 1: create the directory APEX_IMAGES as '& images/apex/1 '.
  new 1: create the directory APEX_IMAGES as 'C:\/apex/images '.
  
  Created directory.
  
  ^ C
  C:\apex >
  
  
  I see a backslash and oblique so I did a ctrl c. When I tried running the new command - @apxldimg.sql
  
  He would just open the .sql file.
  
  Don't know if this is the problem, but still, after that, when I tried the 'go to the page of data. It shows just a blank page. No idea of what needs to be done. I was happy with 4.1.1. Which is available anywhere? Maybe I can remove XE and do a fresh install with it.
  
  Please notify.
  
  Thank you
  Ryan

  Try

  C:\

  Even if it gets rewritten as C:\/apex/images I think that it will always load the images correctly. If the script takes less then a minute (depending on the speed of your machine), then he probably did not.

• Images PNG or JPEG in Flash not appearing is not after the release of Captivate

  Hello

  I am new to this forum and relatively new to work with Captivate. I hope there is someone here with more experience who can shed some light on a problem I have.

  I'm creating a presentation using Captivate4 which includes sequences of animation that are built in Flash. Some of these Flash animations contain imprted PNG files. Flash movies work fine. They even look fine when you preview in Captivate. However, when I try to publish the Captivate SWF file format full I get empty rectangles red everywhere where the PNG files are supposed to be. I tried to use JPEG files instead, and I still have the same problem.

  Any ideas?

  Thank you very much

  David

  I had the same problem in the past and worked around it by converting the images to symbols in flash.

• Table is the mutation of error in after the update trigger

  Hello
  
  In all of my table, I have columns EDITDATE and EDITUSER. So whenever a table is updated I need to update these two fields with the USER and SYSDATE. For this I use a BEFORE UPDATE trigger. This trigger is activated, but I get "ORA-04091: table %s.%s is changing, function of triggering/can not see" error every time I update the table. I used this method in SQL Server. I understand that Oracle doesn't have to be the same as SQL Server but I do not know there is a way to do this. Do you know what it is?
  
  EDIT: Here is the Code of the trigger
  
  create or replace
  TR_LEGISLATION_CALCUL_AE RELAXATION
  BEFORE THE UPDATE
  ON LEGISLATION_CALCUL
  FOR EACH LINE
  DECLARE
  v_LEGISLATIONCALCULID NUMBER (10,0);
  
  BEGIN
  SELECT: NEW. LEGISLATIONCALCULID
  
  IN v_LEGISLATIONCALCULID
  FROM DUAL;
  UPDATE LEGISLATION_CALCUL
  SET EDITUSER_ID = UID,
  EDITDATE = SYSDATE
  WHERE LEGISLATIONCALCULID = v_LEGISLATIONCALCULID;
  END;
  
  Published by: Mikhail on 12 March 2012 23:54

  Mikhail says:
  Hello

  In all of my table, I have columns EDITDATE and EDITUSER. So whenever a table is updated I need to update these two fields with the USER and SYSDATE. For this I use the AFTER UPDATE trigger. This trigger is activated, but I get "ORA-04091: table %s.%s is changing, function of triggering/can not see" error every time I update the table. I used this method in SQL Server. I understand that Oracle doesn't have to be the same as SQL Server but I do not know there is a way to do this. Do you know what it is?

  EDIT: Here is the Code of the trigger

  create or replace
  TR_LEGISLATION_CALCUL_AE RELAXATION
  BEFORE THE UPDATE
  ON LEGISLATION_CALCUL
  FOR EACH LINE

  just put this in your before update (and not after the update as you mentioned) for each trigger line:

  BEGIN
  
  :new.EDITUSER_ID := UID;
  :new.EDITDATE := SYSDATE;
  
  END;