Mac stops do not after the update of the sierra

Similar Questions

• I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  You probably should have updated to 10.5.8 first.

  Installation or update of Snow Leopard:

  http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF

• Illustrator does not not after the last update

  When you open illustrator does not not after the last update

  everything was fine before the update

  also, I use photoshop too, but photoshop is still fine

  I have reinstall but nothing to change

  Problem solved after session connect.

  Solution:

  Rename/Delete the AI CC 2015 "Adobe Illustrator 19 settings: preferences folder

  \AppData\Roaming\Adobe\ C:\Users\

  Kind regards

  Rambour

• Desktop icons not working is not after the closure of the internet.

  Original title: all the answers - desktop icons stop working

  I'm having the same problem with the desktop icons not working is not after the closure of the internet.  Any solution yet?

  Hello

  1. from the desktop icons do not work?

  2. what happens when you try to open these icons?

  3. it happens only after the closing of the internet?

  4. do you use the Internet Explorer browser to surf the internet?

   

  Method 1: Run the following fix - it:

  Difficulty of broken desktop shortcuts and common system maintenance tasks:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   

  Method 2: Reset to follow icon cache the mentioned below as follows:

  See the following steps:

   

  a. right-click on an empty area of the desktop and click on personalize.

  b. click the display properties.

  c. under colors, select medium (16 bit) and click on apply.

  NOTE: If you have medium (16 bit) selected, then select Highest (32 bit) instead. Sometimes, you have to do a reboot first, then go to step d. try both ways.

  d. click on Yes to confirm the new setting.

  e. now, select the highest (32 bit) and click OK.

  NOTE: If you already have the highest (32 bit) selected, then select medium (16 bit).

  II. click Yes to confirm the new setting.

  To follow cache icon rebuild the below steps.

  a. Open Folder Options to select (round) display the hidden files and folders.

  b. open a Windows Explorer window.

  c. go to C:\Users\(User Name) \AppData\Local
  d. right-click on IconCache.db and click on delete.

  e. click Yes to confirm the deletion.

  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.

  f. close the window.

  g emptying the trash.

  h. restart the computer.

  i. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date. (See screenshot below)
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.

  j. the icon cache has been rebuilt.

• Embedded YouTube videos work locally, but not after the FTP publishing. Works locally and on the web in all other browsers. Using FF 17.0.1 and Adobe Flash 11.5.502

  Found a Tube-video, which I embarked on one of the pages of my site. Using FF 17.0.1 and Adobe Flash 11.5.502, YouTube-videos work locally, but not after the FTP publishing.

  I work reasonable locally and on the web in all other browsers.

  Stupid FF?

  The HTML code is as follows:

  <table WIDTH="770" CELLPADDING="0" CELLSPACING="0">
    <tr VALIGN="TOP">
      <td VALIGN="top" ALIGN="left" width="463">
  <object WIDTH="340" HEIGHT="193">
        <param name="movie" value="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE">
        <param name="allowFullScreen" value="true">
        <param name="allowscriptaccess" value="always"><embed SRC="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE" TYPE="application/x-shockwave-flash" WIDTH="340" HEIGHT="193">
      </object>
  </td>
      <td VALIGN="top" ALIGN="left" width="403"></td>
      </tr>
  </table>

  I've experimented on the use of < iframe > instead of < object >. No change. Cache cleared on each attempt.

  Any thoughts?

  If it works in Firefox Safe mode and then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  Alternatively, you can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• HP Simplepass stopped automatically begin after the last update 40.0

  After a few updates of Firefox and in particular the more recent (40.0), my HP Simplepass stops loading/starting when necessary. Its icon is not in the toolbar if it was before. Tools/Add-ons said that it is always available.
  I "fixed" it in the Windows Control Panel and did not help.

  
  

• Back to my Mac works for you after the update to 10.11.4?

  After the update to 10.11.4 on my Mac Book Air I can't see my other computers at the office. I turned it works on desktop computers (yesterday that he would not allow it to work, but today it is) and the computers can't see each other in the Finder, even with restart Finder. Did someone else with problems of connection/browser with Back to My Mac?

  Hey brycesteiner,

  I understand that you have a problem with Back to My Mac. Let's see if we can get this sorted out.

  I would first start by taking a look at the article below to address the problem with the configuration of the router and the parameters of sharing on the Mac that you connect to.

  Get help using Back to My Mac
  https://support.Apple.com/en-us/HT203907

  Take it easy

• VNC Mac does not not after security update 2016-002

  After the 2016 002 security update, I am unable to VNC into any Mac Machine that has been updated.

  Error: The account you selected is not available

  

  We have the same problem here.

  After this last update, we can't connect to mac through VNC.

  We suspect the problem started after the 'Remote Desktop Client Update"and before the"update"2016-002.

  

• WIndows, internet Explorer does not not after the attempt to update windows

  Windows stops responding and lights that shows cpu works doesn't Flash at all.
  Whenever I try to use windows update, my computer crashes while updating. I stopped to automatic update for some time and windows was working fine, 2 days ago I try to update manually, it blocks. now, the computer runs very slowly and each time I use internet explorer, my computer crashes. I tried to use system restore to restore the computer to the date before I use window update, but nothing helped. my computer crashes around 5 minutes after it is on.

  Hello

  Updates are closely related to IE.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ==========================================

  After all above follow these steps:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• notification of release/acoustic music got too low on k4 notes after the last update

  After the update the phones output signal got very low..,.

  the same jst not audible from the Pocket..,.

  developers please do something, the main reason for me to buy this phone was because of two speakers and sound quality..., but not pleasant... at all please solve this problem as soon as possible

  Understand the solution... Everything depends on the dolby setting even the sounds of ringing call and message... Affecting all the default solves the problem

• Windows 7 Pro update is not after the new installation

  I know that this question is asked many times, but I tried pretty much everything that is suggested and nothing seems to work, some worked for others, but they have not worked for me.

  I have replaced a failed hard drive on a Lenovo X 200 an old laptop that I was giving away he a son of friends who needed just for the College.

  I stuck in an SSD and saw genuine window 7 Pro licenses as was previously on Vista, I made a new installation as I've done a hundred times before, and then as always update windows first, but I'm just update Windows scroll bar I left it all night nothing happened.

  I tried using the Microsoft Easy Fix times nothing.

  I tried Windows Update Agent still nothing.

  I tried a suggestion here that seemed to have worked for others install (KB3102810) I did as stated on this occasion, he worked told him there are 225 updates and 18 in option more, I jumped in option one it seemed to work very well it installed just 13 with the lack of rest I restarted as requested but recede in windows it says Windows is up to date, that was impossible.

  I clicked on update again and it does what it was originally just to get the scroll bar that I left for hours and nothing, this is seriously my head in, I think that Microsoft is not going like it the impression that I'm being bullied by installing Win 10 and the person wants to win 10 , because they prefer to Win 7.

  Please could someone help me on this pickle was on this thing now for almost 2 days of installation then put in solid form and re install all to nothing does not.

  I would seriously some knowledge on it.

  Concerning

  It was pointed out Alan

  Ken Morely has the solution.   Follow precisely...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/following-a-clean-install-Windows-Update-remains/ff3c442e-79a6-40d3-AC35-29e130cebef1

  I've used several times, as many others have, and it does not have the problem you describe.

  Install all that it offers to the exception updates Windows that are not labeled security and are dated after 2014.  The reason is that all those who since have no value to your system and prepare your system to accept Win10 and provide information to Microsoft.

• I lost all the emails, photos and notes after iOS Update 9.  I am able to get back them?

  I have lost all emails, photos and notes after that 9 update iOS.  Is it possible to recover?  Help, please!

  It is very unusual - do you by chance have an iTunes or iCloud backup, you can restore?

  Restore your device from an iCloud or iTunes backup - Apple Support

• Laptop HP OMEN - 15-5010nr: Omen HP 15: backlit keyboard does not not after BIOS update

  This morning my HP omen arrived by mail, fully functional with everything in tact. After I left my laptop to install the updates from HP Support Assistant (one of these being an update of the BIOS updates), I returned to find my computer restarted and my enlightened retro keyboard does not. After trying to use HP OMEN control to fix the keyboard, I found the keyboard flashes when I click "Apply to all Zones", but then immediately turns off again. Is it possible to fix this keyboard backlit ir question can we see an update in the near future that resolves this problem?

  Found a solution! Apparently, the keyboard stops after the update of the BIOS, so to reactivate just push F5.

• Photosmart HP 6520 all-in-one: Photosmart HP 6520 Scan to computer function doesn't work is not after the driver download

  After that our latest operating system updated, our HP Photosmart 6520 had scanning problems.  Usually a reboot or as part of the scan on the HP computer would work.  Today, I downloaded the latest driver in the hope that could solve the problem.  Now the scanner is not recognize the computer, and I can't enable analysis of the it function with HP on my Mac utility.  The print feature works very well.   This message I see in the HP utility:

  "The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I searched HP website, but I can't find anything other than the driver I downloaded for Mac OS X 10.10.

  What can I do to get my scanner up and running again?  Thank you very much for your help!

  Hi @kjnowicki

  I want to help you with your scanning device.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• E3200 and wireless MAC filter will not accept the recent MAC formats

  When I go on the web interface for my Linksys E3200, Wireless > Wireless MAC Filter and try to add the MAC to my new laptop computer to work, the user interface returns an error which is the MAC address in the wrong format. I have triple checked the address and I tried adding several times without success.

  Looking at the address, I'm guessing that the beach is not what the user interface has been programmed to accept because it starts at a much higher range. The first 3 bytes of the MAC address is: 1 c: 3E:84:xx:xx:xx

  My wireless router is E3200 with Firmware Version: 1.0.04)is

  Is there any place on the site Web of Linksys I can drop a ticket?

  Never thought it would be a browser problem. I'll have to keep that in mind.

  The computer I was access to the admin of the router UI wasn't in the wireless MAC filter - highlights the filtering MAC wireless had a list of authorized Mac not refused.

  I think that the problem was because I have 6rd IPv6 configured. Some time after the validation, I needed to update the PPPoE password and got the same error. Disabling (cancellation of the configuration) IPv6 6 Dr allowed me to update the PPPoE password successfully. I've not yet returned and re-activated the MAC filter.

  Thanks for the suggestions!