Mobile redirection does not work

Similar Questions

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Domain redirection to namecheap my version of the mobile site does not work well

  Hi, the mobile version of my site does not work after the redirect domain to namecheap.

  I have to set something?

  Sorry for my bad English

  Please check the dns management where you added the front end, its added field correctly then it should work fine.

  URL of the site will help you to study.

  Thank you

  Sanjit

• jQuery Mobile app does not work on OS5 telephone, but works in Simulator

  Hello

  I'm trying to run a simple jQuery Mobile (beta2) app on my phone and its does not work.

  Had been a working app and it worked on the Simulator, but didn't have a screen on the phone Curve8900.

  Then I created a simple jQuery Mobile app that displays a header, content (with listview) and the foot.

  When I insert in the Simulator, it looks fine, but when I charge the phone it loads and displays a white screen with a small gray square at the top left of the screen... (perhaps 30 x 30 pixels or less)

  (the rest of the screen is green, because I put the bottom in the config.xml file to green)

  I've specified:

  and also I tried using:

          addEventListener('load', doLoad, false);
  
          function doLoad() {
              document.body.style.height = screen.height + 'px';
              alert('initPage 3');
          }
  

  but makes no difference.

  (Before I added jQuery to app it worked fine)-very tedious debug because I need to sign the code every time I have test and restart the phone after the installation

  Any help appreciated.

  Maybe someone has a skeleton jQueryMobile app that works on OS5?

  Hi Heiko,

  According to this example JQuery 1.5.2 seems to work on 5.0. Do you need a feature of 1.6.2 otherwise maybe try this library instead.

• HTTP redirection does not work on BNG (ASR9000, XR 4.3.0)

  Hi all

  (1) I have to do for cool subscribers redirect http . Ideally I need to redirect http only for certain users based on the response received from the RADIUS (accept/decline) or according to a RADIUS attribute. For the test I add rule 15 in my control policy-map.

  If I remove 15 rule in the policy-map IPOE_POLICYMAP the session active. But if I use policy-map with 15 rule my BNG send DHCP NAK in response to the user try to re - obtain IP address. Discover/NAK-discover/NAK and so on. Session set up. Where is the problem?

  without rule 15:

  DHCPD PROXY: TP1908: applicant Manager called to CHADRR aaaa.bbbb.cccc with event PACKET

  DHCPD PROXY: TP2483: use server response ID 213.x.x.254 for 213.x.x.211 for CHADRR aaaa.bbbb.cccc yiaddr

  Article 15:

  DHCPD PROXY: TP1908: applicant Manager called to CHADRR 0015.582c.96cb with the DPM_DISCONNECT event

  DHCPD PROXY: TP2805: delete customer called for CHADRR 0015.582c.96cb for reason disconnected Session

  DHCPD PROXY: TP1908: applicant Manager called to CHADRR 0015.582c.96cb with the PACKAGE-DROP event

  (2) can I do "-http redirect" via sent VSA Avpair attributes of BNG in ACCESS-ACCEPT RADIUS? For example I have

  successfully car limit through "sub-qos-policy-in/sub-qos-policy-out". It appears cisco -avpair= "url -redirect=http://...". "does not work with ASR9000.

  (3) why unauthenticated session cool stay after ACCESS_ACCEPT has been received from RADIUS? It is normal for cool?

  I see "sh ipsubscriber session all the detail" and "sh RADIUS.

  -------

  interface Bundle - Ether1.10

  HOMENET description

  IPv4 point-to-point

  IPv4 unnumbered Loopback1

  disable the ARP of learning

  Subscriber control type of service-strategy IPOE_POLICYMAP

  encapsulation dot1q 10

  IPv4 ipsubscriber l2-connected

  initiator dhcp

  Subscriber control type class-map correspondence-everything DHCP_INIT

  match Protocol dhcpv4

  end-class-map

  Subscriber control policy-map type IPOE_POLICYMAP

  starting a match-all event session

  class type control subscriber DHCP_INIT - until the failure

  5 allow aaa list default format SUB_AUTH password cisco

  10 activate dynamic-model IBSUB_TEMPLATE

  15 enable dynamic-model IPSUB_UNAUTH_TEMPLATE<-->

  dynamic model

  !

  type ipsubscriber IBSUB_TEMPLATE

  IPv4 unnumbered Loopback1

  way of 100 IPv4 access-group

  group-access 100 IPv4 output

  !

  type ipsubscriber IPSUB_UNAUTH_TEMPLATE

  type of service-strategy CPR l4_redirect

  Policy-map type ACB l4_redirect

  traffic of type class IPSUB_PERMIT_CLASS

  transmit

  !

  traffic of type class HTTP_TRAF_REDIRECT_CLASS

  redirect http- http://113.x.x.5

  !

  class type default traffic class

  drop

  !

  end-policy-map

  type of traffic IPSUB_PERMIT_CLASS all match class-map

  group-access ipv4 110 match

  end-class-map

  !

  type of class-card traffic of correspondence HTTP_TRAF_REDIRECT_CLASS

  group-access ipv4 120 game

  end-class-map

  IPv4-access list 100

  10 allow icmp a whole

  allow 20 udp a whole

  30 permit tcp any 113.x.x.0/24 eq www

  allow 40 113.x.x.0/24 eq www a tcp

  100 deny ipv4 a

  !

  IPv4-access list 110

  10 allow icmp a whole

  allow 20 udp a whole

  30 permit tcp any 113.x.x.0/24 eq www

  100 deny ipv4 a

  !

  IPv4-access list 120

  30 permit tcp any any eq www

  100 deny ipv4 a

  ---

  Concerning

  Oleg, another pointer, the first thing you should see, is if the ACB is actually applied to your session, like this:

  RP/0/RSP0 / CPU0:BNG #show policy-map type int ACB all

  Mon Oct 7 23:54:19.361 UTC

  node0_0_CPU0: (null): the service policy is not installed

  node0_RSP0_CPU0:

  Bundle - Ether100.540.ip395 entry: HTTPRDRT_PBR

  Policy name: HTTPRDRT_PBR

  Class SRVS_CM

  Classification statistics (packets/bytes) (maybe old 10secs)

  Correspondence: 197/17039

  Statistics transmitted (packets/bytes) (maybe old 10secs)

  Total sent: 197/17039

  Class HTTPRDRT_CM

  Classification statistics (packages)

  Matched             :                   0

  HTTPR statistics (packages)

  Applications received: 0

  Answers: 0

  Redirect drops: 0

  Class class by default

  Classification statistics (packets/bytes) (maybe old 10secs)

  Correspondence: 1/102

  Statistics dropped (packets/bytes) (maybe old 10secs)

  Total has fallen: 1/102

  IF you see this and it still doesn't work, then you need to take a look at your config to redirect, for my tests, I used and the ACLs that allow all traffic tcp/www. I've never denied all traffic, as you do on line 100.

• Header and footer extending the width of the browser in mobile devices does not work

  Can someone tell me why this feature does not work in mobile devices... at least for me? I saw some sites done with Muse and they seemed to be the fact exhaust the width of the screen of the iPad for ex. My sites are all cut on the right side and do not seem to have a good explanation for this. I would really appreciate if someone will give me some comments.

  Here is an example.

  http://checkourwork.com/relivephotography/index.html

  Thank you.

  That does the trick!

  Change the width to the size of your Web site. The two below are what I've used in the past.

  These works perfect for all mobile phones, computers, laptops, computers & tablets.

• HUAWEL E1820 - stick Mobile Broadband does not work after installing vmware wks ver7.0.

  Hello

  I installed vmware workstation 7.0 trial version, after that installation of the sw, my mobile broadband does not or my pc not able to recognize the mobile stick.  The key mobile HUAWEL E1820 model is provided by Starhub in Singapore.

  If anyone can help on this?

  concerning

  ramke

  Manual startup type value VMUSBArbService (VMware USB Arbitration Service) and see if that helps

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• SP M10: Extensions of the TOSHIBA mobile - watch does not work

  Hello!

  Recently, I changed my antivirus software, since my laptop does not go on standby mode. When I try to help nothing happens and I get this message in the syslog - my event log: «a request to suspend power was refused by TMESBS32.» EXE ". If I uninstall mobile extensions of the sleep function works, but I need the mobile extensions, because I use it with my (III advanced port replicator) docking station. If I uninstall antivirus (ah yes...) I went form Norton antivirus 2004 to F-Secure client security suite - latest version) extensions and then mobile work. If I uninstall the mobile extensions and let Eve running F-Secure also works, so I think that there is an incompatibility between the mobile extensions and F-Secure.
  I have TOSHIBA SP M10, windows XP SP2, the latest drivers of toshiba europe technical support site.
  This thing is driving me crazy. Does anyone know what I can do? I could uninstall the mobile extensions, but I grew up in it, so I'm not too keen on such a solution.

  Thank you in advance,
  Milos

  Hello Milos

  It is possible that your software antivirus are problems. Many applications are designed to work with desktop computers and sometimes make problem with laptops.

  Sorry, but I put t any solution there. The problem is that all the tools that you can find on your device are tested, but there is no way to test it with all the software that you can find on the market. If you can work without mobile extensions you must live with it.

• Printer redirection does not work in vWorkspace 8.0

  Hi all

  I am facing problem of printer redirection in Windows 2003 TS.

  When I try to connect via RDP, then the local computer printer redirection works very well.

  But when I connect Server Terminal Server via url web vworkspace then the printer is not redirection. It does not show in the printer and the camera.

  Pease help me solve this problem.

  We use vWorkspace 8.0 and windows server 2003 as a Terminal server server.

  Thank you

  Jean Claude

  Redirect has not been activated.

• getJSON ask mobile jquery does not work on Blackberry App

  I have a mobile application of small jquery for the blackberry platform. In emulator undulation, Chrome plugin, works fine all getJSON demand, but in RIM (blackberry 9300) Simulator with the brand app by PhoneGap Build getJSON demand do not recover the data, show the spinner of the loading in infinite loop.
  Could be something in the configuration file? Many thanks for any help!

  Configure you an element of access for the domain that you are applying to? You need to whitelist your application needs to communicate with the areas. Ripple of does not apply this rule.

  http://www.mydomain.com" subdomains="true">
     
  
  

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_developing/Access_element_834677_11.html

• mobile data does not work after update of the lollipop

  Hello. On my mobile data z2 does not at all. I've updated lollipop yesterday and since nothing. Factory reset I tried, CCP repair of wit, get internet settings-plus internet connection setting, simply nothong. Can U help me pls...

  It was something with the network settings. Mobile Internet same profiles have been set by the network itself, I've rewritten manually each box in these circles, weird...

• MOBILE VERSION DOES NOT WORK!  Adobe is not aware that encrypted forms fail using portable player?

  I created a PDF form in Acrobat 9 Pro and it encrypted with a password.  No other restrictions were placed on the document.

  When I open the document on an android (tablet or phone) device or an iPod, it does not fill in all the fields where apply a signature of any kind.

  However, when I opened the exact shape even with the desktop (XI player) version, it allows me to fill and sign without problem.

  I have no problem filling and applying a signature to a mobile device when the document is not encrypted.

  Help, please!

  I've updated all versions of my to the most recent.

  Yes, Adobe is apparently aware of this.

  For Adobe to omit these features from basic to its mobile version is appalling.

  I expect this from Microsoft, but not Adobe.

• The mobile emulator does not work

  I downloaded the emulator on my machine and unzipped the folder on my desktop.

  When I click on fennec.exe the program starts successfully. However, when I type a URL in the browser and go through it, I get a blank screen. Looking at the comand window I see the following message is displayed. I browsed around the config, but can not see everything that I should be setting or update.

  # forms.js loaded
  # content loaded
  !! remote browser loaded
  CSP WARN:  couldn't parse report URI: /services/csp/report
  
  ##!!! [Parent][AsyncChannel] Error: Channel error: cannot send/recv

  You can try a newer version of the Fennec emulator? Here is a candidate for our upcoming 4.0b2 release version, which might work better:

  http://FTP.Mozilla.org/pub/mozilla.org/Mobile/candidates/4.0b2-candidates/build4/Win32-i686/Fennec-4.0b2.en-us.Win32.zip

• Synchronization of mobile users does not work

  Hello

  I always try to get the synchronization of mobile users to work, but no matter what I do - it simply doesn't work. I even followed the explanation in "El Capitan Server - Collaboration & control", but I don't understand.

  Did someone here is just ready to get trough this correctly? I would really appreciate it.

  Welcome.

  Hello.

  I think that this information can help you

  Get help using iCloud Contacts, calendars, or reminders - Apple Support

• Help! CSS for tag hr in the mobile site does not work

  Hello

  I would be grateful if someone would say why the color of tag hr how it is described in the CSS style sheet is not rendered in the mobile browser (or even in computers)? You can see the site here:

  http://www.lidesign.cc/test/mobile1.XHTML

  Is the problem that it is in the middle of the list or what? I'd like to tag hr as the background color.

  Thanks in advance!

  Problem #1: HR tag Styles are managed differently by the major browsers.  Mozilla t - it somehow, Opera another and yet another IE.

  http://www.sovavsiti.cz/CSS/HR.html

  #2 problem: I do not know how or even if all mobile devices support HR tags.  It might be better to use a border.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB