Mod_user handling in a table using the trigger

Similar Questions

• How dynamically update the role of oracle using the trigger

  How dynamically update the role of oracle using the trigger:
  
  I have svmanger owner of schema in the database. There are five tables belonged to svmanager.
  
  Table A, B, C, D, E.
  
  I have a role that is played only to these tables under the scheme: SVMANAGER_READ_ONLY
  
  now, if I create a new table F under svmanager. the role that svmanager_read_only does not work is updated, so the user had assigned role cannot access table F.
  
  is there a way to create the trigger for this role dynamically update any when a table is created or deleted?
  
  Thank you.

  I really really really don't suggest to do this - it's a bad habit. If possible I'd just adding the grant as part of the steps to the role on the new creation of the table.
  But for fun here's how you can accomplish this:

  create or replace procedure execute_grant(v_ddl in varchar2)
  is
  begin
     execute immediate v_ddl;
  end;
  /
  

  create or replace trigger catch_create_table_trg after create on schema
  DECLARE
  
  ddl_job number;
  ddl_str varchar2(50);
  begin
     IF ora_dict_obj_type = 'TABLE' THEN
  
         ddl_str := 'GRANT SELECT ON '||ora_dict_obj_owner||'.'||ora_dict_obj_name||' TO SVMANAGER_READ_ONLY';
  
         dbms_job.submit(job => ddl_job,
         what => 'execute_grant(''' || ddl_str || ''');',
         next_date => sysdate+(5/24/60/60));
  
     END IF;
  end;
  /
  

  Test it

  create table F (id number(1));
  

  Validate

  select * from ROLE_TAB_PRIVS where ROLE = 'SVMANAGER_READ_ONLY';
  

• How do I auto detects the target using the trigger VBAI mode

  Hello world

  I had a vision system of machine ready to take choose using VBAI 2013 sp1.  Also, I use a sensor switch to trigger the camera to take pictures.

  When I type the loop running, it just won't continue to take photos no matther switch sensor triggers the camera or not.  I think it's the step that I used for the recording of the image, in the stage of registration of the image, I used picture newspaper still, but I don't want to use which is only what inspection status allows no other choice.

  So, how can I let the unit wait until he got the trigger of the alarm switch signal, and then take a picture and save the image?

  the stage of inspection to acquire the image, I used the trigger mode and everything worked fine, except the time error settting upward, I used 5000ms and if I put bigger like the 50000ms, VBAI turned really slow and showed time out error.

  If anyone can help me on this matter?

  Thank you

  You can use the diagram States-transitions to go only in a State based on the result produced by some steps.

  First, remove the registration step of the image of the State to check with you get the image

  Press Ctrl + E to turn the main view on the state diagram.

  Right click and create a new State.

  Right click on the State to inspect and create a new transition to this new State.

  Double click on the transition to edit it.

  Choose to acquire the Image - waiting time and set the condition false, to spend in this state when there is no timeout.

  Move the default transition from that State to the final State.

  Click on the new State to select it, and then add the image registration step.

  Using a state diagram, you have programmed an inspection that will record the image when there is no timeout.

  The State-transition diagram is a powerful tool to add a logic, branching and looping of your inspection.

  Open the tutorial 5 - state diagram Branching.vbai and tutorial 6 - State chart Looping.vbai for examples on how to use it.

  I hope this helps.

  Christophe

• Get the 500 error trying to create a table using the REST API

  Hello

  I tried to create a table using the REST API for Business Intelligence Cloud, but I got 500 Internal Server Error for a while now.

  Here are the details that I use to create a table.

  

  and the json to create the schema that I use is

  [{'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ["ROWID"]}]

  , {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['RELATIONID']},

  {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['ID']}

  , {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['RESPONDEDDATE']},

  {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [255], 'columnName': ['RESPONSE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_CREATEDDATE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['SYS_CREATEDBYID']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_LASTMODIFIEDDATE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['SYS_LASTMODIFIEDBYID']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_SYSTEMMODSTAMP']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [10], 'columnName': ['SYS_ISDELETED']},

  [{'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [50], 'columnName': ['TYPE']}]

  I tried this using postman and code, but I always get the following response error:

  Error 500 - Internal server error

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.5.1 500 internal Server Error The server encountered an unexpected condition which prevented him from meeting the demand.

  I am able to 'get' existing table schemas, delete the tables, but I'm not able to make put them and post operations. Can someone help me to identify the problem, if there is no fault in my approach.

  Thank you

  Romaric

  I managed to create a table successfully using the API - the only thing I see in your JSON which is different from mine is that you have square brackets around your values JSON where I have not. Here is my CURL request and extract my JSON file (named createtable.txt in the same directory as my CURL executable):

  curl u [email protected]: password UPDATED h x ' X-ID-TENANT-NAME: tenantname ' h ' Content-Type: application/json '-binary data @createtable.txt https://businessintell-tenantname.analytics.us2.oraclecloud.com/dataload/v1/tables/TABLE_TO_CREATE k

  [

  {

  'columnName': 'ID',

  'dataType': 'DECIMAL ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': false

  },

  {

  'columnName': 'NAME',

  'dataType': 'VARCHAR ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  "columnName': 'STATUS."

  'dataType': 'VARCHAR ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  "columnName': 'CREATED_DATE."

  'dataType': 'TIMESTAMP '.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  'columnName': 'UPDATED_DATE ',.

  'dataType': 'TIMESTAMP '.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  }

  ]

• How can I stop the process using the trigger Disqualification?

  How can I stop and start the process using triggers in Disqualification?  While planning a job, I can not able to see the folder of trigger / trigger name in the tool palette? What kind of file should be placed in the Triggers folder. If you know someone, let me know. If someone has shared an example script which is very useful for me.

  Thanks in advance.

  Malila Chandra.

  It is a common use case.

  You create a job that has a closed Web Services trigger configured before executing the first phase (right click on the stage in the Task Manager, select Configure, you will then see this screen below), with the work or or jobs you need to added stop. This must be configured to be 'blocking', i.e. the rest of the work expected on the triggering comprehensive action.

  

  Work should have a phase which refreshes the data staging, and another phase (or a phase of post trigger) that returns your work in normal real time (using the trigger on the job).

• Update a table using the clause

  Hello

  I want to update a table using the selected values.

  Cases in the sample:

  
  

  create table as empsalary)

  Select 1 as empid, 0 in the wages of all the double union

  Select option 2, the double 0);

  Data update are as follows

  with saldata as

  (

  Select 1 as empid, 5000 as wages, 500 as double pf

  Union of all the

  Select option 2, 10000,1000 like double pf

  )

  Select empid, salary saldata

  I tried the following query but does not work

  updated set of empsalary table (empid, salary) =

  (

  Select * from)

  with saldata as

  (

  Select 1 as empid, salary, 500 5000 as pf Union double all the

  Select option 2, 10000,1000 like double pf

  )

  Select empid, salary saldata

  ) sl

  where sl.empid = empsalary.empid

  )

  I use oracle 10g.

  Help, please.

  Krishna Devi wrote:

  Hello

  I want to update a table using the selected values.

  Cases in the sample:

  create table as empsalary)

  Select 1 as empid, 0 in the wages of all the double union

  Select option 2, the double 0);

  Data update are as follows

  with saldata as

  (

  Select 1 as empid, 5000 as wages, 500 as double pf

  Union of all the

  Select option 2, 10000,1000 like double pf

  )

  Select empid, salary saldata

  I tried the following query but does not work

  updated set of empsalary table (empid, salary) =

  (

  Select * from)

  with saldata as

  (

  Select 1 as empid, salary, 500 5000 as pf Union double all the

  Select option 2, 10000,1000 like double pf

  )

  Select empid, salary saldata

  ) sl

  where sl.empid = empsalary.empid

  )

  I use oracle 10g.

  Help, please.

  Thanks for posting creates table and test data.

  The error message would have helped because it's pretty obvious that this is the problem:

  Update table empsalary

  *

  ERROR on line 1:

  ORA-00903: invalid table name

  Just remove the word "table".

• Creating external Tables using the EXECUTE IMMEDIATE in PL/SQL

  Hi guys,.
  
  I am trying to create an external Table using the EXECUTE IMMEDIATE in a procedure and I managed to compile and no errors were generated. But when I try to run it from sql using the exec command I get the following error:
  
  ------------------------------------------------------------------------
  ERROR on line 5:
  ORA-00911: invalid character
  ORA-06512: at "GEO. TEST_DDL', line 4
  ORA-06512: at line 5
  
  -------------------------------------------------------------------------
  
  I tried to check the whole statement to create the external table, but I can't find where is the error. Surprisingly, if I simply run the command table create external on sqlplus it works, but not a procedure.
  
  If anyone can help with ideas or experience?
  
  Geoffrey Kossami

  The error means that there is an identifier somewhere that starts with a nonalphanumeric. This is a typical mistake of editing. A procedure compiles correctly is not of course because the underlying dynamic sql running is OK. Which of course only be resolved when you try to run it.

  There is certainly a problem with the text you provide to be run as a piece of dynamic sql code. You should try to watch it with dbms_output and run this code in sqlplus. But your problem is with the code you run as dynamic PL/SQL, it is not itself compilable.

  Jack

• It does not work when you use the trigger to check the data of the other table.

  Please help me with this, I put a trigger on a table, but it can not work as I expect.
  
  case study: a class has many students, one of them is going to match.
  The purpose of this trigger is to check when to choose a student going to match, this student has in his class where it belongs to.
  Oracle version is 10.2.0.1.0.
  

  --table:
  DROP TABLE STU;
  DROP TABLE CLASS;
  
  create table CLASS(
  CID     VARCHAR2(5)   PRIMARY KEY,
  CNAME   VARCHAR2(20)  NOT NULL,
  SCHOSEN VARCHAR2(5));
   
  create table STU(
  SID     VARCHAR2(5)   PRIMARY KEY,
  SNAME   VARCHAR2(20)  NOT NULL,
  CID     VARCHAR2(5)   NOT NULL REFERENCES CLASS(CID) ON DELETE CASCADE);
  
  --data:
  --CLASS
  INSERT INTO CLASS(CID,CNAME) VALUES(1,'SUN');
  INSERT INTO CLASS(CID,CNAME) VALUES(2,'MOON');
  INSERT INTO CLASS(CID,CNAME) VALUES(3,'EARTH');
  --STU
  INSERT INTO STU VALUES(1,'JACK',1);
  INSERT INTO STU VALUES(2,'TOM',1);
  INSERT INTO STU VALUES(3,'LILY',2);
  INSERT INTO STU VALUES(4,'DUSTIN',3);
  
  --TRIGGER
  CREATE OR REPLACE TRIGGER CHECK_SCHOSEN
  BEFORE INSERT OR UPDATE OF SCHOSEN ON CLASS
  FOR EACH ROW WHEN (NEW.SCHOSEN IS NOT NULL)
  
  DECLARE
  DUMMY INTEGER;
  INVALID_STU EXCEPTION;
  VALID_STU EXCEPTION;
  MUTATING_TABLE EXCEPTION;
  PRAGMA EXCEPTION_INIT(MUTATING_TABLE, -4091);
  
  CURSOR DUMMY_CURSOR (ST VARCHAR2, CL VARCHAR2) IS
    SELECT SID FROM STU, CLASS
    WHERE STU.SID=ST AND STU.CID=CLASS.CID AND CLASS.CID=CL
      FOR UPDATE OF CLASS.SCHOSEN;
  
  BEGIN
    OPEN DUMMY_CURSOR(:NEW.SCHOSEN, :NEW.CID);
    FETCH DUMMY_CURSOR INTO DUMMY;
    IF DUMMY_CURSOR%NOTFOUND THEN
      RAISE INVALID_STU;
    ELSE
      RAISE VALID_STU;
    END IF;
    CLOSE DUMMY_CURSOR;
  EXCEPTION
    WHEN INVALID_STU THEN
      CLOSE DUMMY_CURSOR;
      DBMS_OUTPUT.PUT_LINE('PLEASE RE-ENTER CLASS ID AND STUDENT ID AS CLASS OR STUDENT IS NOT VALID.');
    WHEN VALID_STU THEN
      CLOSE DUMMY_CURSOR;
      DBMS_OUTPUT.PUT_LINE('STUDENT CHOOSE SUCCEFULLY!');
    WHEN MUTATING_TABLE THEN
      NULL;
  END;
  /

  Just copy and paste on it and try to run next:
  UPDATE CLASS
  SET SCHOSEN = 3
  WHERE CID = 1;
  Clearly, you can't student who is 3 as to Member of class 1. Please help me. Thank you.
  
  Published by: 991096 on March 1st, 2013 02:36
  
  Published by: 991096 on March 1st, 2013 03:03
  
  Published by: 991096 on March 1st, 2013 03:11

  Hello

  991096 wrote:
  1. the purpose of this trigger is to check when to choose a student going to match, this student has in his class where it belongs to. Then, when I try to choose 3 student-member of correspondence of class 1, should give me "PLEASE RE-ENTER ID AND STUDENT ID AS CLASS or STUDENT not IS NOT VALID."

  Then do something like this:

  CREATE OR REPLACE TRIGGER CHECK_SCHOSEN
  BEFORE INSERT OR UPDATE OF SCHOSEN ON CLASS
  FOR EACH ROW WHEN (NEW.SCHOSEN IS NOT NULL)
  DECLARE
      sid_found     stu.sid%TYPE;
  BEGIN
      dbms_output.put_line (:NEW.schosen || ' = schosen entering check_schosen');             SELECT  sid
           INTO    sid_found
       FROM      stu
       WHERE     sid     = :NEW.schosen
       AND     cid     = :NEW.cid
       AND     ROWNUM     = 1     -- to avoid TOO_MANY_ROWS
       ;
  EXCEPTION
      WHEN  NO_DATA_FOUND
      THEN
       RAISE_APPLICATION_ERROR ( -20000
                      , 'Please re-enter class id and student id as class ('
                        || :NEW.cid
                        || ') or student ('
                        || :NEW.schosen
                        || ') is not valid.'
                      );
  end;
  /
  

  DBMS_OUTPUT creates only a message. The message may not be displayed, and if this is the case, then the user cannot see it. The DML will still take place.
  I used instead, RAISE_APPLICATION_ERROR to keep the DML does not happen. It displays a message like

  ORA-20000: Please re-enter class id and student id as class (1) or student (3) is not valid.
  

  ' 2 ' game ' means ' an official competition in which two several people or teams competing.

  What individuals or teams are competing in this case?
  In any case, the question wasn't 'that 'game' means', but

  Frank Kulash wrote:
  What do you mean when you say "going to match?

  I think that now you're saying that the new values of (class.cid, class.schosen) must be equal to (or "fit") some existing (stu.cid, stu.sid).

  3. thanks for your tip, I learned how to use '{code} '.

  4. it's really goes with the exception of MUTATING_TABLE. So, how do to fix the trigger to show me INVALID_STU EXCEPTION when I try to choose a student does not belong
  a class?

  Don't refer to the table of class in the trigger, and the error table mutation occur. All the information you need are in the stu table, so there is no need to query the table of class, anyway.

• Use the trigger and seq to insert into 2 tables

  I created a sequence.

  I have 2 tables

  I want a trigger that when I insert in the 1 table inserts the sequence number nextval, that is no problem, but also is there a way so that once that happens it also inserts this same value of sequence in another table.

  So the end result is a new record in the table has the seq value and a new record in table b with the same value of seq (and the rest of the fields blank)

  Thanks for any help

  Could do:

  SQL > create the sequence myseq;

  Order of creation.

  SQL > drop table t2 is serving;

  Deleted table.

  SQL > drop table t1 is serving;

  Deleted table.

  SQL > create table t1 (collar number);

  Table created.

  SQL > create table t2 (collar number);

  Table created.

  SQL > create or replace trigger mytrig

  2 before the Insert on t1

  3 for each line

  4 start

  case 5: new.col is null

  6. can

  7: new.col: = myseq.nextval;

  8 insert into t2 (col)

  9. Select myseq.currval

  10 double;

  11 end if;

  12 end;

  13.

  Trigger created.

  SQL > insert into values (null), t1 (col);

  1 line of creation.

  SQL > select * from t1;

  COL

  ----------

  1

  1 selected line.

  SQL > select * from t2;

  COL

  ----------

  1

  1 selected line.

• change the column using the trigger

  Hello
  is there any possibility or a way around to change a LONG column in a trigger BEFORE INSERT and BEFORE UPDATE?
  the scenario is like this.
  Old DOS applications (this is why we must use LONG in the Oracle), they inserting a record in Oracle (9.2.0.8 - HP UX).
  
  They are inserting ASCII characters that must be converted properly by Oracle using REPLACE.
  But the problem is that I can not handle a long TIME in relaxation.
  
  We have set the Oracle Client and Server NLS_LANG by using the same character set ISO-8859-1.
  but in some sort the ASCII character has managed to go to the Oracle, and it had not stored in the database.
  
  Use change will take more time than making a cleaning trash in the database.
  
  Is there a way around that you think.

  OK, you have your problem:

  Check this box:

  SQL> create table t
  (
     user_id        number,
     user_account   varchar2 (10),
     user_status    varchar2 (1),
     user_message   long
  )
  /
  Table created.
  
  SQL> create or replace trigger t_trg
     after insert
     on t
     for each row
  declare
     l_new_long   long;
  begin
     execute immediate '
         declare
           l long;
         begin
           select user_message into l from t@loopback where user_id = :1;
           update  t@loopback set user_message = replace(l, ''Some'', ''Some other'') where user_id = :1;
         end;
            ' using :new.user_id;
  end t_trg;
  /
  Trigger created.
  
  SQL> insert into t  values (1,  'michael', 'Y',  'Some Message')
  /
  1 row created.
  
  SQL> select * from t
  /
     USER_ID USER_ACCOUNT USER_STATUS USER_MESSAGE
  ---------- ------------ ----------- --------------------
           1 michael      Y           Some other Message
  1 row selected.
  

• How to identify the name of the procedure that inserts into a table in the TRIGGER

  Hello
  There are several procedures in my DB that perform the INSERT operation on a main table - MYTAB say.

  I created a trigger on the table MYTAB, to follow closely, what procedure is insert data in there. Is there a function that captures the name of this object?

  For example: PROC_A, PROC_B, PROC_C insert into the table MYTAB. And my query is - the trigger on table MYTAB should document these object names where the lines fit.
  Please let me know your suggestions...

  SQL> create table t (no integer, dt timestamp, who_inserted varchar2(4000));
  
  Table created.
  
  SQL> create or replace procedure p
    2  as
    3  begin
    4    insert into t (no, dt) values (1, systimestamp);
    5  end;
    6  /
  
  Procedure created.
  
  SQL> show err
  No errors.
  
  SQL> create or replace trigger t_trig before insert on t for each row
    2  begin
    3     :new.who_inserted := dbms_utility.format_call_stack;
    4  end;
    5  /
  
  Trigger created.
  
  SQL> show err
  No errors.
  
  SQL> begin
    2    p;
    3  end;
    4  /
  
  PL/SQL procedure successfully completed.
  
  SQL> select * from t;
  
          NO DT                             WHO_INSERTED
  ---------- ------------------------------ ----------------------------------------
           1 31-OCT-14 04.58.53.668465 AM   ----- PL/SQL Call Stack -----
                                              object      line  object
                                              handle    number  name
                                            3a7ddbea0         2  KARTHICK.T_TRIG
                                            3ac979f30         4  procedure KARTHICK.P
                                            3a822deb8         2  anonymous block
  

• How to get the numbers to remember a list of answers column on nine or more tables using the same format

  I'm new to numbers but were mainly use it to organize only a simple way to display the cases that arise in a criminal background check. So for a table, I can type driving while license revoked (DWLR) as the load and from there on the charge will fill itself or offer similar responses after typing a single key.  A well appreciated time saver but problems I can sort and summarize the criminal history for 10 people or more at a time and need to do it urgently often.   However when I opened a new table I have to cross and type a new the precise wording of a charge, its disposal (Guilty, voluntary dismissal etc.)  and just know that there is an easy way for the numbers to know in a new table that, if finished it is a list annoyingly long term broken criminal code list and do not have to do that in each new table so that it can take.  I know I'm missing something very basic, but any help would save hours for me and the other poor interns who spend twice as long just to undestand the case and troubleshoot.  Thanks for all the ideas!

  David

  Hi D,

  The AutoComplete feature provides suggestions picked on data entered in the cells above the one you are working in. You can automate the process by preparing a "full menu" table containing ALL the possible inputs for each column in the rows below the header lines.

  

  The checkbox in cell A1 is a switch, is used to insert the word HIDE in the cell that contains the list of AutoComplete terms. Cells in this area are filled with bright red to draw attention to them when indicated.

  A rule to reorganize (shown and applied below) hiding these lines when the box is checked.

  

  Hide the lines does not affect the operation of auto-complete, as shown in the table below:

  

  When the form is competed, action depends on how the result will be recorded and filed.

  If there is no need to edit/modify the file, it can be converted to a PDF using the print dialog. This produces a copy of the displayed part of the document only.

  If the document will require more editing, you can remove the lines containing AutoComplete suggestions. Clear the check box, select all the red lines filled, click the triangle in the row reference tabs and choose Remove.

  Formula in A2 - A10: = IF(A$1,"HIDE","")

  Kind regards

  Barry

• How to use the trigger for Hammer

  Hello

  I used a hammer and an accelerometer of pcb to do some tests of beam. I want to express signal for start of log data after I use the hammer hit something. Here is my configuration in express signal.

  Trigger type: analog edge. Source of relaxation: the channel of the hammer
  Slope: fall. Level: 0

  However, once he began to run, it says "logging was stopped because an error occurred with a step in the project. If this error is due to a device buffer overflow, you can improve performance by disabling updates to screen using the "view > views of Signal update during the race" menu item. You can also change the way in which the signals are recorded by changing the Logging Options in the tools > Options dialog box. Disabling "Prepare the log for display data" will greatly improve performance. "I've changed everything, but it didn't work.

  Should I use other types of trigger?

  Thank you
  Ningyu

  
  

• How can I resize the window of my table using the node of furniture? Thank you

  Hello

  I want to first the size of the window of my table using its property node but I can't put it to "write".

  If anyone knows if this is possible?

  Thank you

  User

  Hello

  Some properties are 'read only' and there is not that you can do about it.

  However, to set the size of your chart, you can use the "conspiracy area.size" (I don't know how it was translated into french) can be found here:

  

  Hope this helps

• Excerpt from my table using the loop For

  Hello

  I have this loop to create a 2D array. The result is on the table below. I want that this 2D table should be fully completed and compiled, then it will be sent out of the loop.

  I don't want to extract the value of table 2D is a loop. This is the problem that I am facing.

  My ultimate goal is to extract the individual number of the final table of the 2D table line and be an entry for other functions.

  Please help me. Thank you

  PX

  Hi PX.

  Here's a solution without using screw express