Mode of mirroring of the FS7500 Force without UPS/BPS

Similar Questions

• How to start Firefox in Mode safe on Windows 8 directly from the Start Menu without switching to normal startup?

  Y at - it an option to start the firefox safe without having to open the firefox I have normal mode

  In Windows 7, there is an option to start Firefox in Mode safe in the Mozilla Firefox Menu

  You can start Firefox in Mode safe in two ways

  1. Hold the SHIFT key while double clicking on the Firefox icon in your desktop
  2. Press Windows key + R (open the command run) and type firefox-safe-mode

• My iPhone 5 s a problem that the accusation itself decreases without using the phone, I changed the battery it is always the same and I put it in airplane mode it's always the same problem how to solve this help please?

  problem iPhone 5s load is reduced to

  My iPhone 5 s a problem that the accusation itself decreases without using the phone, I changed the battery it is always the same and I put it in airplane mode it's always the same problem how to solve this help please?

  Please help me anyone

• I can connect with the Administrators account without starting windows in safe mode in win xp pro sp3

  I can connect with the Administrators account without starting windows in safe mode and if yes, how?

  If I ca not, how can I load the graphics in safe mode drivers as all graphical interfaces are not displayed correctly.

  Thank you, Andre

  If XP Pro using the Welcome screen, press CTRL + ALT + DELETE to bring up the classic login box.  In the connection box, type the administrator user name and password. Boulder computer Maven
  Most Microsoft Valuable Professional

• How to force the cache update swf to the newer version without overwriting all files

  Hi I have a system of e-learning in line with XMLs, SWFs, etc...

  These are cached locally. When I have a new update of the user used to clear their local cache otherwise they would not receive what is ridiculous.

  Now we have a system that replaces everything what we call "Break cache", BUT the problem is I can't clear the cache just one or two file updated.

  Is this possible? I was told it is the html tags that operate in the browser that deals with this, write us, but now I'm totally lost. There must be a solution, it is only common sense.

  Thaks in advance.

  Yes codeBeastAdobe, I mean that I usually do a single XML file that describes the hierarchy of my project. Each article, paragraph, within those, assets etc. On each node, I would have a version, if necessary. The size of the XML file is about ~ 50 k on a large project, or the size of a small image. It is the only ONE without a cache file that I load in requesting it with a seed.

  In this, each piece as you mentioned (food.swf, clothes.swf, sounds, etc.) would be in their appropriate section that looks like my interface what to load. In addition, I would add in a simple attribute where the managed version are elements.

  Very simple example:

  Content / somesection.swf

  Assets/Clothing.swf

  Assets/somevideo. MP4

  Of course, XML is much more detailed with specific attributes of application and structure, but you get the general idea. Only, I have download this app.xml without cache and compare it to the current version of an asset I.

  With the help of a system like this means that you must know which version of one that you have makes it so you will need a system for that as well but this is a whole different debate.

• Windows 7 always stops forced without asking

  whenever I stop, it is always forced arrested without the usual notice, for this reason, some of my programs are more likely to crash

  Hello

  1. do you get an error message/code?

  2. you made any hardware or software comes to the computer before the show?

  3. What is the brand and model of the computer?

  Here are some ways you can follow to resolve the problem:

  Method 1:

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-in/Windows7/open-the-power-Troubleshooter

  Method 2:

  Step 1:

  Try to start the computer in safe mode and check if the same problem occurs.

  Check out the link:

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the issue is not still in safe mode with network, then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.

  See also:

  Turn off your computer properly

  http://Windows.Microsoft.com/en-us/Windows7/turning-off-your-computer-properly

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  
  IE can you define the rules of affinity DTS depending on how the rules of storage of profiles are configured for a virtual machine?

  In my mind it seems there is disconnect from the DTS and storage profiles.

  Thank you.

  = NOTE =.

  My lab at home, 2 organizes running ESXi 5.0

  Dv01 has

  Of startup vmfs 7200 RPM 160 G = dv01-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  VM02 has

  Of startup vmfs 7200 RPM 160 G = VM02-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  Vmfs 5900 RPM 2 TB = VM02-TV01

  I have (3) facility profiles of storage using 'User-defined storage Capablity' as shown below:

  (160 @ 7200 RPM SATA) boot > Boot

  Fast (160 7200 RPM SATA and 1 TB @ 7200 RPM SATA) > fast

  Slow (2 TB @ 5900 RPM SATA) > slow

  Then, I set up a storage Cluster with my local disks on dv01 (only to date)

  LocalVM disc dv01-BOOT and dv01-VMFS disk of the 'cluster of storage.

  I have a computer virtual called DC01 (HardDisk1) want to live on 'Boot' profile storage drive
  His "Non-compliant" poster according to the storage profile, it should run on drive 'boot' on dv01

  To get to this point, I put the StorageCluster in Mode of Maintenace 'DTS' and forced a sVmotion of all virtual machines off dv01-BOOT

  No disks are IO or claim of space.

  But once I take the 'DTS Maintenacne mode' STARTUP dv01 floppy is now get the DTS to return him to satisfy the storage profile (rule) I install... IE do the 'storage profile' VM complient (without doing a few externall API, the PS script or the 3rd party software calls)... ??

  Seems weird it is (or may be) such disconnection of a memory of the profiles and the StorageClusters and the DTS?

  Thank you...

  At this point, I think that storage DRS and storage profiles are two technologies to separate and work independently, but what you suggest is a great idea-

• Cannot locate the policy files without restriction for the Sun JCE for download

  My platform:
  Java version "1.6.0_26".
  Java (TM) SE Runtime Environment (build 1.6.0_26 - b03)
  Oracle JRockit (R) (build R28.1.4-7-144370-1.6.0_26-20110617-2130-windows-x86_64, update mode)
  
  I can't locate the files of the PVE skill unlimited force.
  
  According to BouncyCastle for Java 1.6:
  ... "you need to download the policy files without restriction for the Sun JCE if you want the provider to work correctly." Policy files are in the same place as the JDK download. For more information on this can be found in the documentation on the Sun JCE. »

  The version at the bottom of http://www.oracle.com/technetwork/java/javase/downloads/index.html should work.

• Satellite 1900-603: formatting the HARD drive without losing data

  Hello!

  I have a laptop of Pentecost 2 partitions in one, I have the OS and in others, I have my data, my problem is I want to format the partition with the operating system without losing my data, I intend to use for formatting recovery CD. Is this possible at all?

  Another question, I bought my laptop on the Switzerland but I am Portuguese is it possible to get an in Portuguese of toshiba recovery cd?

  Thank you

  Hi Rita

  It is of course possible.
  I assume that you installed your operating system on the first partition and all important files are placed on the second partition.
  The recovery procedure contains the standard and expert recovery mode recovery mode.
  You must choose expert mode. Here it should be possible to choose the partition where the OS image must be installed.

• Using the FN keys without flash cards

  Hello everyone

  I wonder if its possible to use the FN keys without toshiba flash cards on the top of the screen and therefore without having to install the value-added package?

  Some FN keys like brightness, mute, switch the display and sleep work without VAP
  but I also enabled WiFi, touchpad switch, mode switching power, buttons, which do not zoom

  Yet once, I don't want this utility to flash, still running cards and consumption of ram

  As far as I know something like this is not possible and if you have FN feature flash card utility must be running in the background.
  This along with the consumption of RAM is funny to me because if you turn it off you won't see any difference in the performance of the computer.

  Maybe you should disable some other background process unnecessary that you don't need.
  If you have the new model laptop with Win7 they have enough RAM for all operations and execution of flash cards will not have much influence on the performance of the computer.

• Re: Can I repair the operating system without resetting the whole HARD drive?

  I have a Toshiba Satellite M50, I ran an antivirus in safe mode scan today and must have accidentally deleted a file system because now I can not connect.
  The computer will start but when I try to log in it connect, flash back, my office to the floor once and then connect again.
  I can repair the operating system without resetting the entire hard drive and lose all my files?

  And if not, is there someway to initiate a prompt BACK because I don't that the file is still in the recycling bin, and I might be able to restore it.

  Hello Bambi

  Repair option with the recovery DVD (image recovery) is not available. Using recovery DVDs, you can install OS and have once again the factory settings.
  As far as I know at the BACK level, you can start using BACK discus. You can create bootable CDs.

  You can start your computer in Mode safe?

• You try to run the scan mode and mode interface fpga at the same time is causing errors

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:
  
  Open FPGA interface reference.
  Reserved outside LabVIEW FPGA:  turns The RIO Scan Interface.  You must set the mode Interface FPGA chassis in order to unlock the FPGA. »
  

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

  rex1030 wrote:

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  This should not be the case.  9211 data will not update with each sweep, but you should be able to run the scan faster than 15 Hz without problem.  Do you have specific issues with this?

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  You can try making sure that the chassis is set to mode Interface FPGA and the setting is deployed.  I wrote that article that you referenced says will select the deploy option later and not explicitly speak to deploy the chassis later.  Run a VI with a reference open FPGA vi not automatically deploy chassis settings if you need to do it explicitly.  Try the following steps.

  1. right click on the frame element and select Properties.  Make sure that the Interface FPGA option button is selected. \

  2. right click on the frame element and select deploy.

  3. repeat your VI.

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141

  
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:

  Open FPGA interface reference.
  Reserved for LabVIEW FPGA outside: The RIO Scan Interface is running. You must set the mode Interface FPGA chassis in order to unlock the FPGA. »

  The likely cause of this error is that the setting of the FPGA Interface on the chassis has not been deployed.  If the chassis is still Mode Scan fixed personality bitfile will be loaded on startup and the FPGA will be locked.

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  I'm sorry that you have had difficulties.  Assuming that I'm wrong about the source of your problem, it seems we have to update less than Ko to include the deployment step.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

• feedback loop on the impact force

  Hello

  I use labview 8.5 and a card Ni USB-6221 to control the power output of an actuator and monitor the output signal of a load cell.  The actuator allows strength 50 Hz which is measured by the sensor.

  The signal from the load cell is basically a very narrow peak occurring at a 50 Hz.  I want to measure the height of each peak, average figure (maximum strength varies from 2 or 3%) and then use this data to provide a feedback loop to keep the constant force applied.

  [img] http://farm4.static.flickr.com/3067/3077344302_4b7bb5f2a3.jpg [line]

  I tried to use 'amplitude and levels' vi 'peak', for an average to exit mode.  However, this seems to give a result fluctuate widly which is useless for feedback purposes. I tried to increase the sample of this vi period with no luck.

  Anyopne there any suggestions on how to do this? I could do this using the detection of peaks of waveform?

  Any help or advice would be greatly appreciated.

  Thank you very much.

  Hi John,.

  Thanks for your post and I hope that your well.

  To create a circular buffer in LabVIEW, you can use a shift register. However, for large number of data points with a large displacement to register on the side of the loop are stupid and impractical. This is why you must use a table, in which you update the value of the old with the new value, and you set the size of the table for the number of points you want to have in the buffer.

  I have created an example of a buffer in LabVIEW 8.5 - Please see attached VI.

  Also, if you do any static anylsis so perhaps consider using the functions of point by point, which no longer require the updated value to calculate the most recent average (for example). This saves because of the calculation table in its entirety every time.

  Hope this helps,

• Iconia 10 b3 - A20 waking after the deep sleep without rebooting

  I answered a few questions so now I'm going to ask to my .

  I had a problem with my B3 - A20 Iconia Tablet since I got it: it won't wake up if he has been asleep for more than a few minutes, unless I have hold down the power button and it reboot.

  Here's what I've tried so far:

  -A factory reset

  -Installation of all Liveupdates of Acer.

  -Run the Nova launcher instead of Acer home (this was done to get rid of that screen with the left hand, but I thought I would mention it)

  -EZ toggling reactivation

  -Toggling Acer Liveupdate

  -Configuration wifi sleep mode to "always." (This suggestion was made for the same problem in android 3.1, I understood what the heck)

  If someone has had this problem, and is there a solution? I'm pretty tech savvy (I build PCs as a hobby!), and I'm happy to install firmware etc if necessary.

  Eh, I still did and solved my problem: /. I'll save it here so that others have the solution.

  After some intensive research (i.e. googling stuff), I discovered that refusing to wake can be caused by an application hangs the system to wake up. After reviewing the various applications, I found that it was google cloud print and the Acer Smartcoverapp causing difficulties. Because I do not want to use Cloud print (applications published by the printer manufacturers are fast and efficient), and I do not have a smart cover, I have disabled both and now he wakes up instantly to sleep.

  Here's how to disable an application:

  -Go to settings, then choose "apps".

  -Slide the screen on the side until you reach the tab 'All' scroll down to find the app you want to disable.

  -Press on the name of the application

  -This will bring up a screen with two large buttons to the top: "force stop" and "disable". Depending on the application, there may be a third which reads "uninstall upgrades". If the 'disable' button is grayed out, it is a system application and cannot be deleted.

  -Click 'disable '. Depending on the application, you may be asked if you want to uninstall updates. Click Yes.

  -Fact!

  How to activate an application:

  Just in case you disabled something and then have need in the future, you can reactivate again:

  -Go to settings, then choose "apps".

  -Slide the screen on the side until you reach the ' disabled tab scroll down to find the app you want to activate.

  -Press on the name of the application.

  -This will bring up a screen with a button that says 'enable '. Click on it.

  -Fact! But don't forget to update the application to the latest version! If you do not have faffed all your settings, this happens automatically. Otherwise, go to the reading of Google, click on the three lines at the top of the home screen and choose 'my applications' - you can update the things from there.

  Hope this article is useful.

• Had to install XP Pro in one folder other than the Windows folder. Can I delete the new folder without causing problems?

  I was cleaning some ad/bad/spyware on the computer of a friend. It runs XP Media Center 2005. When I restarted it, it wanted a password. He put never, ever. The only work around was to reinstall XP without deleting any of his files (more than 8000 music files) because it is not anything save. I put the new XP in a different folder, I named. After searching around, all of his stuff is there and I can access, but this new folder is take a LOT of resources/mem. There is almost nothing in this record, I can delete the new folder without compromising each other, installation? I think I would need to get rid of mode safe mode with command prompt. I did it so many times, but it's never happened to me. Help!

  Once you get the drive installed, simply use xcopy or Robocopy to copy the files, with a fairly large music 8000 drop these command-line utility will be faster than to try to copy them through the Windows Explorer GUI.  Xcopy is integrated with Windows XP, Robocopy is available for download from Microsoft.

  John