Model of control-JRA-registration of JRockit-Misscion

Similar Questions

• model reference control

  Hello

  I've just hava on thing in my mind

  Why is there nothing in the control of labview block 2012 that implement the model reference adaptive control?

  any information! ~~

  Best regards

  m, sm

  mangood

  I'm looking for examples.  Discover these .  Have you heard of our PID Toolkit?  More information here.  Can you describe your application?  Which could help to clarify your question a bit.

• game bug model with control characters beaches

  The primitive model match has problems when dealing with the beaches of control characters. For example I want to match a control character (0 x 00-0x1F) in the input on the model [\00-\1F] string. The primitive model match does not consider the model as a range but as three characters: \00, - (dash) and \1F. It will return a match only if one of these three characters in the input string. It works fine when you use \codes to other beaches such as [\30-\39] to match the decimal digits.

  LabVIEW 8.6

  OK, I obviously didn't pay attention to this post.

  Try to use the corresponding regular Expression and then use [\x00-\x1F] to the entrance of the regular expression.

  

  I hope that it is closer to understand your problem as my first answer.

  Kind regards

  James

• Reuse of the custom controls in a model of VI

  Hello

  My question is do my Subvi more reusable modules using templating.

  I am writing a message in queue manager application to control many different instruments running asynchronously.

  A super nice feature of the models that I recently discovered, is that if you include a control or a Subvi as a model in your file LIVES.

  If you create a new VI using this file LIVES it automatically prompt you to re - register these files, which would allow me to save a lot of time during duplication

  My managers of messages queued for the different modules. (I know that the actor model eliminates this, but it is important that I get this done soon, and I won't change my project too at this point).

  My question is that, with the model of control, I seem to be unable to use a file the same way TTC. That said, I can have one instance of a TTC but when I try to create a copy of it I am asked to re-record it as a .ctl file, so if I created a new VI from the model I'm unable to update all instances of the control in this way convenient.

  Is there a work around for this?

  Thank you in advance!

  Ah, actually, I solved my problem; just does not allow quick selection because then it will use the model to create a new ctl file.

  To remove a TTC, I need select file .ctt via browser. Oops.

• Abstract control model (SAMSUNG GALAXY)

  CONNECT MY SAMSUNG GALAXY S TO MY PC, IT SAYS NEW HARDWARE DETECTED, I CAN'T HAVE TO LACATE DRIVERS OR INFORMATION ANYWHERE FOR THIS PROBLEM, THE REQIURED DRIVER IS FOR, MODEL DCC CONTROL ABSTRACT (ACM). I AM RUNNING WINDOWS VISTA HOME 32 BIT WITH ALL UPDATES AND SERVICE PACKS

  Connect with Samsung Kies
  Ensure that Samsung Kies is installed on your PC.
  Support for Galaxy S
  http://www.Samsung.com/UK/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=1903&prd_mdl_cd=gt-I9000HKDXEU&prd_mdl_name=gt-i9000&srchword=Galaxy+S

  There is a video "connect your Galaxy S to your PC.
  Read the user manual 'PC connection '.

  I hope I could help

• Problem with the task of control of model code - execution instance remains open

  Hi Experts
  
  We have some model mappings, for which we use some similar code with the model code BUILT_IN_CT model. Mappings to run successfully, but the task of control of model code seems to remain open. It's the same thing, even if I use the code model of control by default BUILT_IN_CT/CCT_ORACLE.
  
  To see if the control task remains open, I run the script...\dbhome\owb\rtp\sql\list_requests.sql, and I get the following output:
  
  ====================
  EXECUTIONS
  ====================
  ID of the audit. State of... Name... Date of... Owner...
  16_FLOW_CONTROL LOAN 260573 19 APRIL 11 10:15:16 OWBSYS
  
  As a solution to the problem, we managed to implement a custom task jdbc, in which we are to pick up instances of this task and then close them using the owbsys.wb_rt_script_util.deactivate_execution procedure.
  
  Anyone know the reason for this problem and if there is a solution for it, other then to implement a custom task to close the open instances?
  
  We use OWB 11 GR 2 on Windows.
  
  THX
  Your help will be much appreciated

  Yes, I see now the verification element hanging out in OWB, this looks like a bug in the OWB audit management, it should not be suspended. I don't think impact on behavior, he is a piece of dangling audit data that should not exist. You can raise a bug/SR?

  See you soon
  David

• How to configure the form control

  I created my first site of BC, and need help. I use the default form, Check Out, which seems to be created dynamically because I do not see in my list of 'Pages '. I only have the standard gateway of PayPal, so I need to:

  1. block the choice of credit card, PayPal (etc.) for only PayPal

  2. reduce the choice of fields to the value default PayPal (will happen this automatically?)

  3. make the required address field so I can send a physical receipt.

  Does anyone know how to do this? I've been searching for centuries in the region of forms, without success.

  Thank you

  Greg

  To change the form control you go to Site Manager > Module models > Online Shop Layouts > registration - buy. Then simply delete or comment out payment types, you do not want to provide. A bit of html knowledge will be necessary here.

  In regards to address my billing address is automatically required. To use the address of the home for shipping and make it necessary, simply navigate to Site Manager > Web Forms > select online store purchase (if you have not created a custom form). Add address and make it necessary.

• How to remove pages on a mac book models

  How to remove templates, I did on my mac through the pages book? the delete button does not work?

  Hello..

  In the template chooser, the name of the model, the control key, and then choose Rename or delete.

  You can also get help for Pages in other words. With the open Pages app, go to the menu bar help > Help page

  In this case, you must type: Remove Templates in the search field top right of the Help window, and then press enter or return on your keyboard.

• Satellite A300D and ExpressCard Remote control

  Hello guys,.

  I own a Satellite A300D-135, y at - it an available for this model remote control? I'm looking for a remote control that fits in ExpressCard location as some HP models have.
  I looked at several Dutch hardware well known, but I can't find a remote that fits the ExpressCard location.
  I give many presentations and therefore use my laptop a lot. I would like to have a remote control that fits in ExpressCard location because that saves space and a remote control of such a size is easy to "hide" in your hand.

  Kind regards
  Hunterseaker

  As much as I know Toshiba doesn t offers remote control for this model of laptop. The question is whether a third party product is available on the market.
  To be honest I have no interest in something like that, but I just want to recommend you to visit the web page of Logitech. They have so many products for PCs and laptops. Maybe they have a solution for the remote control that you can use with your laptop.

  If you can find some interesting product please post the link.

  Good luck!

• How to interface a simple way using LabVIEW 2009 simulink model and SIT?

  Hello

  I finally found a way to use a template simulink with LabVIEW and the Toolbox to SIT, but I'm not satisfied.

  If you have any suggestions, the link of resource that I missed, please do not hesitate to answer

  Note that I do not know much about simulink, so that is my question seems stupid, let me know what

  Software configuration

  OS: Windows (not an RT target)

  LabVIEW 2009

  SIT 2009

  question 1: interfacing the model DLL (mapping considerations) with a driver VI

  We have created a model of DLL by using the 'Workshop in real time' tab in simulink.

  In LabVIEW, launch us the tool 'SIT connection manager' and try to use the DLL with a driver VI by mapping the e/s model for screw/lights orders.

  The fact is that I fail to connect to my controls/indicators VI/o model because they do not appear in the mapping dialog box.

  The simulink single objects that I managed to map are "constant" and "test points" while I need to edit the template simulink itself (example below)

  

  Are in e/s model, not considered as part of the parameters of the model? (this could make sense because the mapping says in fact that it operates on "model parameters")

  Is it possible to link the IO model VI commands/lights?

  Note:

  -the "configure HW i/o mapping" dialog box allows me to map model e/s with e/s HW...

  -The examples also use these "constant" and "test points".

  2nd question: use of direct screw SIT

  I tried to use the DLL directly with the screws SIT (code example below)

  This kind of code works well on another project (target of 8.0/RT LV) but not on the current project (LV 2009/Windows)

  The second stage of the model never ends:

  -0-index of the loop works as expected (model doing its job).

  -index of the loop 1 starts normally, but execution is stuck in the 'SIT scheduler.vi.

  Then I have no choice that to kill LabVIEW ("Reset screws" windows appear if I try to stop/close them).

  

  Is there a reason that I do not see what explains this behavior?

  Thanks for reading.

  Any help appreciated.

  Kind regards

  Hello

  I spent some time analyzing the VI driver as you suggested.

  Here are my findings.

  Question 1: the SIT connection manager does not pass to the model SW controls/indicators. Only, it allows the user map HW AIs/AOs.

  The only solution I found (to have a SW - for example a shared variable - object that is mapped to an input/output model) is to customize the VI driver that is scripted by the SIT Connection Manager ("_Baserate Loop.vi" in the flat sequence structure named "read code")

  Question 2: after spending some time in the VI driver, it seems that the VI to call right is not 'SIT scheduler.vi' but 'If SIT take model no time' (which uses the other as a Subvi)

  

  My conclusions are correct? If I use the API in the wrong way, please let me know.

  Kind regards

• Delete several partitions in the physical model

  Hi all

  I don't know if anyone has the same need for me, if this is maybe because I don't know how to do something which is already being implemented.

  Anyway, my question is:

  How can I remove multiple partitions (400) both from the same table in the physical model?

  I choose the partitions, but the popup does not work, I can press the button Delete in the toolbar, but don't participate in anything.

  I imported my data dictionary, a scheme with several tables that have lots of partitions and I'm not interested to save these partitions.

  When I try to generate the DDL generates all partitions and I don't want the DDL with thousands of scores on the inside.

  the number of tables with partitions is not so high but isn't comfortable to go one by one by selecting the partitions and deleting the object (400 times in one table),

  I can change the table to say that is not partitioned and all partitions will disappear but I so need to again change the table and include the fields for partitions and partition, not useful,

  Another option would be to select when importing, if I want to import only a single partition for each table

  but I do not know is at the end there just because I think only delete partitions with a single operation should be sufficient, at least for me

  Thanks in advance

  Hello

  I connected an improvement on that request.

  An approach that could help is to use the dialog box compare models to control which partitions are imported.  However, this feature is available in version 4.1 (EA1 and ai2).

  If you have something in your model before making your import (for example a fictitious Table), the dialog box compare models will be displayed after the import.

  In tree compare models, if you expand the node of a Table with partitions, it will appear a range Partitions, the node list Partitions or Partitions to hash.  If you uncheck this node, the subordinate entries for all the individual partitions will become selected, and they will not be included when you use the merge button.

  If you have many Partitioned Tables and you want to do this for all Partitions of your range (for example), you can move from tree to table in the dialog box view to compare, and then change the option SET to the range Partition Type (top-right) and then use the button to deselect all (upper-left) to deselect all Partitions of the range.

  David

• Adding "User Registration System" on my site with DreamWeaver...

  I did some reading and watching YouTube videos on how to go about this process and it is rather confusing. Does anyone have a description on how will this process for Dreamweaver 2014.1.1 the 'proper' way to build/system of registration of the user to add to their Web sites via? Below my "sync settings" at the top right I don't have that CSS designer, files, active, Insert, checked. In all the video tutorials I looked there was much more so than :-(

  In a batch which I read and watched, I feel that I have a generator that is "test server" PHP Script for a database. That being the case, Adobe has all - or any specific PHP software suggestions - as to what we should use with Dreamweaver? I guess we certainly with regard to the registration of the user due to the gross amount of the names/emails/etc., that can be collected.

  I know I'm wide enough right now, but I'm looking to be guided in the right direction. I know insert a simple model of the user registration system would be easy, but I don't know if this is how it's done for everyone in this case. As well, I'd like to at least make a unique in a certain measurement, that's why I love Dreamweaver!. It's my third site and I'm looking to improve each!

  Thanks for any help/links.

  John

  Recovery group dating site

  DW alone cannot do that.

  Simple way:

  If your hosting plan gives you a server C-Panel, you can connect to it and create password on your server folders.  A folder with the same user name and password.

  If that fails, contact your webhost and ask their password protect a folder on your server for you.

  
  

  Lasts:

  If your server is Linux and not Windows, you can use the .htaccess and .htpasswd files to protect a folder on your server.  See below for more details.

  Protection of password with .htaccess and .htpasswd

  Harder, more advanced medium:

  Create a MySQL database with phpMyAdmin on your remote server.

  Create files CRUD with PHP scripts.

  Registration of the user and login with PHP and MySQL Script | Cage of coding

  Nancy O.

• The model overview XSL - FO

  We have customized the model of control XSL - FO standard purchase "PO_STANDARD_XSLFO.xsl." However now for some IN. custom model of XSL - FO is a failure. I would like to get a preview of the output on my desktop using template .xml file and output XSL - FO. I know we can get a preview of the output using BI Publisher Desktop for RTF model but we can get a model overview XSL - FO. ? If not any other tool or method I can try. ?

  I searched on Google but I did have a lot of luck.

  Please let me know.

  When you have installed the Office of editor of BI, there should be a program called model viewer that can be used to display an overview of XSL - FO models.

• How to apply the Calendar control for date field?

  Hello
  
  I created the field date tomcat creation calendar control by OPM and the environment and which apply as CSS thanks to OPM.
  
  But it does not work for the field to date, but if I changed to the text field, then he gives me the calendar control.
  
  So what changes required for this?
  
  Thank you

  Looks like you have changed a CSS style that applies to all the input controls and not only the date controls. Add something just for the dates, the simplest method is to change the model, which control the rendering of controls date (DateInputControl.vm).

• Basic presentation model blocks using event listeners

  Hello

  I have a slide show 'powerpoint style' built in Flash CS5, AS3, using the basic model (IE on chassis 1 root to move the images on the cursor keys). Everything works perfectly until I get to a MC that has the following script (excerpts):

  button_1.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame);

  function fl_ClickToGoToAndPlayFromFrame(event:MouseEvent):void

  {

  gotoAndPlay (2);

  }

  There are a number of them on the timeline of MC to advance to different periods in the order. Everything works perfectly, except that when it gets to the last image. I press the cursor right to move to the next slide in the root and it works. However this slide blocks... regardless of the content. I deleted the ACE on this MC and everything works very well is definitely a conflict between the script above and the model frame control script:

  stage.addEventListener (KeyboardEvent.KEY_DOWN, fl_changeSlide);

  function fl_changeSlide(evt:KeyboardEvent):void

  {

  if(evt.keycode == 37) / / LEFT

  {

  gotoAndStop(this.currentFrame-1);

  }

  ElseIf (evt.keyCode == 39 | evt.keyCode == 32) / / RIGHT GOLD SPACE

  {

  gotoAndStop(this.currentFrame+1);

  }

  }

  Stop();

  Any ideas. PS Si I wait about a minute, it starts working again (ie the advance of frames as usual).

  Thanks in advance

  Rhys
  

  We know not what you mean when you say "I press the cursor right to move to the next slide in the root.  See if refocus aid scene.  As part of the root after the plot of the mc, try adding this code and see if it helps...

  internship. Focus = this;