Model: XBR55X850B REF: 5005006

Similar Questions

• How to reinstall Vaio control center

  I, too, have the touchpad problem where I constantly hit him and eventually typing some random paragraph above allows to disable the touchpad when typing transcripts (I am a court reporter). I recently upgraded to Windows 7 (64-bit) and my control center options are now limited and include more the possibility to enable/disable the touchpad.

  I looked in the downloads on this site and cannot determine the appropriate one. I found a single download that looked OK, but said I must be on Vaio care versions 5. something and I am on 6.3.0.09020.

  Also I saw on this forum that there is a possible combination of function keys F1 to toggle the touchpad. I'd like to be able to do instead of launching control center.

  Can someone help me create the combination of shortcut keys or download the appropriate driver or update including the control center? Thank you.

  Hello
  Welcome to the Forums of Discussion of the user.
  What model of laptop do you have?
  If you are not sure of your model please refer to this guide.
  http://eSupport.Sony.com/us/Perl/suppor... nfo_id = 264

  your model is released before the fall of 2007? If so your model may not have full support for windows 7, if this is the case check here for some tips on installing your driver.
  viewtopic.php? t = 8254 & f = 8

  However if your Touchpad is drifting I think I can explain what is happening. go to control panel and click on the mouse properties.

  is there a tab function?
  If so disable Web support and side and down scroll
  y at - it a section to enable or disable tapping?
  If yes Doubletap disable.
  If none of the above are present, what has happened is windows has installed the default properties on the USB mouse driver and replaced the Touchpad utilities. Because the Touchpad lacks these utilities to help control, sometimes it can move erratically you met.

  To solve this reinstall Notebook control and public services
  Reinstall the shared library

• HP Pavilion P6-2496ea: Pc does not start, no startup screen is

  Hello
  I have a HP Pavilion with D7B29EA #ABU product number and model number P6-2496ea.
  
  I tried to run a repair on a HARD disk that was connected externally, it was taking too long so I cancelled the process and rebooted my PC.
  
  The reboot took much too long, so I forced shut down the system. Then I tried to turn on my PC, but it does not reach the power upward.
  
  When I tried to turn on my PC, I noticed the following:
  -no screen, just a screen black (I tried different video output on the PC, but with the same result, no video)
  -LED 'on' which starts as amber and then turns to blue flashes only on amber.
  -by turning the HARD drive and the fans are running.
  
  I tried to reset the BIOS to factory settings, but not joy.
  
  Any help will be greatly appreciated.

  Hi all

  After some research, I came to a conclusion that the above symptoms were caused due to a corrupt BIOS.

  I run a BIOS reset procedure several times but only started to notice results after 24 hours a BIOS reset.

  Reset method for those who do not know the BIOS, please see the steps below:

  1 turn off the machine.

  2 - remove all the USB connections of the machine (the keyaboard dongle and mouse apartment)

  3 - Unplug the power to the system.

  4 - with the cable disconnected, amd press hold the power button on your machine for 3-5 seconds.

  5 - Remove the battery from the motherboard BIOS.

  6. remove the jumper from pins 1-2 amd put on pins 3-5 (for HP Pavilion p6-2496ea, for other models please refer to the manual of the motherboard).

  7. usually you leave the machine in this State for 15-20 minutes and then follow the rest of the instructions. If a reset of 20 minutes work try a reset 8 or 24 hours (leaving the machine with the reset jumper on).

  8 - Mount the batery.

  9. remove the jumper to reset the pins and fit the default PIN, 1-2.

  10-card sector in the system.

  11. turn on the machine, you should have a boot system.

  I hope the above helps you guys, it certainly worked train me.

  Good luck.

• External template function (control and Simulation Module) on Linux using target

  Hello

  I am trying to run the 'EMI_Integrator.vi' for example on one OR cRIO-9024 (nor a myRIO).

  I moved the file 'EMI_Integrator.so' to the ' / or-rt/system ' on the cRIO and the .so file added to the target in the LabVIEW project. I can not navigate to the .so file directly so I specified the .so path manually, but the VI is not able to run and an error of-2366 'reissue model '.

  "You can find the original version of VI in the Finder for example OR", but I've included my modified version that has a LabVIEW project and targets already loading.

  Thank you

  Mitch

  Hello Mitch,

  If you want to use the external model on a 9024 node, you must copy the appropriate VxWorks library (.out) file to the/or-rt/system folder of the target. The .out file is located in LabVIEW\Examples\Control and Simulation\Simulation\External model Interface\EMI_Integrator\RT-Lib\vxworks.

  In LabVIEW, have the external model node refer to the file of the library appropriate for your operating system. In my case, I use a .dll for Windows file located in the folder EMI_Integrator, above.

  When I run the VI on the cRIO target, referring to the library on my host computer, it will automatically search the folder to/or-rt/system for a file with the same name with .out.

  Kind regards

• Controller SCSI Raid ESXi 5.5 recommendation

  I'm moving the ESXi 5.5 to another server by using the following:

  
  

  Server Dell R610 with 12G of ram and a Dell PowerVaul 220 s Raid 5 with 12, space 1, 5 - T HD sata

  The Raid Controller is a Intel SRCU42E Ultra320 SCSI PCI-Express X 8 with ext 2 x 68pin ports.

  
  

  I get the error ' call 'HostDatastoreSystem. " 'Of object' CreateVmfsDatastore 'ha-datastoresystem' on ESXi when you try to add storage. I even installed 5.1 but with the same results.

  
  

  Later, after much research and troubleshooting, as well as headaches, I discover that the SCSI Raid card was not compatible with ESXI 5.1, 5.5 only with 4.1 or 4.0

  I begin to scan the cards SCSI RAID but difficult to get one with the above specifications that could be compatible with ESXI 5.5

  
  

  Run out of tricks and do not have the ability to turn the Dell PowerVault 220 s

  May suggest a SCSI Raid PCI - e card with a port Ext. 68pin compatible 5.1 to 5.5? All of the recommendations, difficulty, work around?

  Thank you

  ESXi 5.5 system requirements

  When you install or upgrade to ESXi 5.5, ensure that the host meets these minimum hardware configurations supported by ESXi 5.5:

  1. Your equipment is compatible on the VMware Compatibility Guide. This includes:
  • Systems compatibility
  • Compatibility I/O (network adapters and HBAS)
  • Storage compatibility
  • Backup software compatibility
• You have a 64-bit processor. VMware ESXi 5.5 only installs and runs on 64-bit x 86 CPU servers. He argues also that LAHF and SAHF CPU instructions.
• You have a computer with at least two hearts 5.5 ESXi host.
• The NX/XD bit is set for the CPU in the BIOS.
• Your processor is supported. ESXi supports a wide range of x 64 of multicore. For a complete list of taken processors supported,
• You have 4 GB of RAM. This is the minimum required to install ESXi 5.5. Provide at least 8 GB of RAM to take full advantage of the features of ESXi and run virtual machines in typical production environments.
• Support for hardware virtualization (Intel VT - x or AMD RVI) is enabled on x 64 CPU (to support 64-bit virtual machines). For a complete list of operating systems that are supported with ESXi, hosts running virtual machines with 64-bit operating systems have these hardware requirements:
  • For AMD Opteron systems, processors must be Opteron Rev E or later.
  • For Intel Xeon systems, processors must include support for Intel Virtualization Technology (VT). Many servers which may include processors with VT support VT disabled by default, so you have to manually enable VT. If your CPU support VT, but you do not see this option in the BIOS, contact your provider to request a version of BIOS that allows to enable VT support.

    Note: to determine if your server has 64-bit VMware support, download The utility of Identification of CPU on the VMware site.

• You have one or more Gigabit or 10 GB Ethernet controllers. For a list of network adapter models supported, refer to the VMware Compatibility Guide.
• You with any combination of one or more storage controllers are:
  • Basic SCSI controllers. Adaptec Ultra-160 or Ultra-320, LSI Logic Fusion-MPT and most NCR/Symbios SCSI.
  • RAID controllers. Reference Dell PERC (Adaptec RAID and LSI MegaRAID) RAID HP Smart Array or IBM ServeRAID controllers (Adaptec).
• You have a SCSI drive or a local, off-grid, RAID LUN with unpartitioned for VMS space.
• For Serial ATA (SATA), a drive connected through taken SAS controllers supported or supported integrated SATA controllers. SATA drives are supposed to be remote, no premises. These discs are not used as a partition to scrape by default because they are too far away.

  Note: you cannot connect a SATA CD-ROM device to a virtual machine on a host ESXi 5.5. To use the SATA CD-ROM device, you must use the IDE emulation mode.

• You use a supported storage system. ESXi 5.5 supports the installation and start-up of these storage systems:
  • SATA drives. SATA drives connected behind the SAS controllers supported or SATA controllers support built-in.
    • LSI1068E (LSISAS3442E)
    • LSI1068 (SAS 5)
    • IBM ServeRAID 8K SAS controller
    • Smart Array P400/256 controller
    • 5.0.1 Dell PERC controller
  • SATA drives. Support SATA edge include:
    • Intel ICH9
    • NVIDIA MCP55
    • ServerWorks HT1000

  Note: ESXi does not support using SATA internal disks local to the host server to create VMFS stores of data that is shared between multiple ESXi hosts.

• You have disks Serial Attached SCSI (SAS) supported for ESXi 5.5 installation and to store virtual machines in VMFS partitions.
• You have dedicated disk SAN Fibre Channel or iSCSI.
• You have USB devices supported for ESXi installation.
• You can install and start ESXi a FCoE LUN using VMware software FCoE adapters and network with FCoE adapters discharge capacity
. See the documentation for storage for more information about installing and initializing ESXi with vSphere FCoE software.

• Import of duplication order-Options

  Hello
  
  I use Open Interface import command to convert legacy data. For lines of the Kit Option, I'm filling top model line ref and link to the ref code and line components. When the import command explodes BOM and creates lines of the option, it's duplicate some of the options. Any idea why this happens?
  
  Thanks in advance,
  Ananth

  If you import kits, you create the template line high-end than in your interface.
  Do not create the child lines.
  Oracle will take care of the kids lines. It is because in a kit of all children are mandatory.

  Sandeep Gandhi

• Files on server flat non-local drive

  How can I 'say' ODI the source .csv file is on the server rather than on the C drive?
  Thank you!

  There are many answers to this function how your topology looks like and how the systems are organized in your configuration.

  Essentially, you need to configure the topology manager and the physical schema of the technology of the files installation.
  By server, I assume you have a Unix machine on which reside the files and you want to ODI designer/agent that is running on your machine windows to access the files on the Unix computer.
  You must install a samba UNIX drive and access it through windows as \\yourUnixServer\file\path

  In the physical architecture, you will need to set the directory as \\yourUnixServer\file\path and the file data model will refer to the above mentioned directory for all data files.

  Hope that helps.

• Association of model REF 195 spice to the symbol

  I need to use a reference voltage with output of 5 V REF 195.

  I made the coast and found (attached) model in the site of Analog Devices.  I do a simple circuit (attached) with the symbol but simulation don't give good results.

  I think that the problem of the Pin Mapping Table: symbol has 4 pins and table mapping only pins 1, 2, 3, 4 for the model. On the contrary in the model you will find pins 2, 3, 4, 6. Finally, I can not connect + 5 (Vout) pin in the symbol with PIN 6 in model.

  Am I wrong?

  Is there a way to overcome the the Pin mapping table and "connect" manually pins in symbol and model, using any number?

  The values in the mapping of the model pine Table represent the order of pins as specified in the subcircuit model and not the actual numbers PIN themselves.  Referring to the attached model (and using the symbol names specified), the classification should be VS (1), SD (2), GND (3) + 5 (4).  I tested out and am correctly see + 5V output.

• Columns of REF Modeler 3.0 data in relational model

  Hello
  
  Anyone know how in Data Modeler 3.0 (Production), create a column in a relational table that reference (REF) an object table and then brought this REF to the table of the object?
  
  Thank you

  Technically this is not a problem however what kind of line you expect to see. Clause of "Scope" is not obliged referential, so we cannot use the FK line. We need another type of line - probably it will increase the complexity and decrease the understanding for large diagrams. The same concerns the functional dependencies.

  Philippe

• HP Envy 15-j004tx: model of bad hp envy 15-j004tx system

  Hello
  
  I own a HP Envy 15-J004TX and I sent for repairs because of problems of motherboard and they had replaced him.
  
  and when I come back the laptop. system model shows "HP Pavilion dm3 Notebook PC"

  Please refer to the picture.
  
  

  And every time that I do the update of the window. Sometimes my camera will not be detected or my speakers does not work.
  
  I need to uninstall the update or download the drivers from http://support.hp.com/ee-en/drivers/selfservice/HP-ENVY-15-j000-Notebook-PC-series/5354982/model/538...
  
  This results in the BIOS?
  
  If it's just to install the last bio as shown below?

  Updated HP Notebook System BIOS (Intel processors)

  Hi @ComputerNoob1,

  It is best to report your problem to HP customer service.

  Please the following link http://www.hp.com/contacthp allows you to create a folder for your problem and contact HP. If you do not live in the United States / Canada, please click on the link http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html to get contact information for your region.

• IPAD (model MD367LL): question since the first IPAD AirPrint

  Function AirPrint won't print in the bar in small print on printer HP MX922.   On my IPAD2, printing as ok - still print to tray great impression.

  Hello

  HP have no any model of MX922.

  Can refer you to Canon Pixma MX322?

  If this is correct, I suggest you to contact Canon, they will certainly know their best products

  Shlomi

• Hard drive WD3200BEKT is replaceable with newer model, the WD3200BEKX?

  I have a HP G62-231NR notebook model and I need to replace the hard drive. The hard drive, he came up with what is WD3200BEKT-60V5T1.  I found this on Amazon at this link that looks like, simply:

  http://www.Amazon.com/black-320-mobile-hard-drive/DP/B001CO3EKQ/ref=sr_1_1?s=electronics & ie = UTF8 & qid...

  I have also seen that there is a "newer model of this point", which is called the WD3200KEBX.  I found this on Amazon here:

  http://www.Amazon.com/Western-Digital-Black-notebook-WD3200BEKX/DP/B00DSUTVYK/ref=dp_ob_title_ce

  I wonder if the KEBX is compatible with the KEBT and even if yes, what is the difference?  It would be advisable to go with the newer model, the KEBX?

  (Pricing is $2, so this isn't a factor)

  Thanks for your help!

  Either one will work. The only difference is one is a retail disc and it is a package in bulk... sold to system integrators and other systems. Same basic material. For the same price, you could actually find a 500 gig.

  http://www.Newegg.com/product/product.aspx?item=N82E16822145587

  It's a record (7mm) thin, but has twice the cache (32 vs 16 megs megs) would be a little faster. It will work. You don't need to replace the exact drive. All 2.5 inches wide 7 or 9.5 mm SATA HDD works. You could even install a hybrid propulsion system or the solid state drive.

  Your manual... see page 47:

  Manual

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Sony TV XBR55X850B purchased in the United States can be used in Europe? We are expatriates and goes back.

  Dear Customer Service,

  We would like to buy aTV Sony XBR55X850B to the United States.

  We are from Europe and temporarily stationed in the United States.

  In three years we goes back to Europe and wishes to continue to use the TV here.

  This model is compatible with standards in the United States and the Netherlands (Europe, Holland)?

  Thanks in advance for your answer.

  Best regards

  OLAF

  Hi opvanderkraaij, glad to hear that you're interested in buying a Sony 4 K TV XBR55X850B model number, you will need to take into account the following:

  1. Various countries have different power supply systems.

  
  

  2. Video format for broadcast and video display standards.

  For more information, you can also visit the links below:

  https://La.en.KB.Sony.com/app/answers/detail/A_ID/38878/p/61659%2C62766%2C93313%2C93963/c/65%2C75/kW...

  https://La.en.KB.Sony.com/app/answers/detail/A_ID/29914/p/61659%2C62766%2C93313%2C93963/c/65 %2C75/kW/PAL%20system

  If my post answered your question, please mark it as "Accept as a Solution."

• REF of HP envy 17 3D 2199ef: LS592EA #ABF and support of windows 8

  Hello

  Do you have the Envy 17 3D ref 2199ef: LS592EA #ABF will support Windows 8?

  and when driver will be available?

  Is it possible to use the SP58812 for the AMD radeon HD 6850 m switchable graphic?

  The 2199ef of Envy 17 3D were sold in France until at least December 2012

  Thanks for your response

  concerning

  jaroe,

  Sorry, this model was not tested by HP and is not recommended for the upgrade of Windows 8.  HP print drivers to Windows 8 support for this model.

  -wes

• Model of keyboard Lenovo G500s 20245

  I had used Lenovo 20245, everything is perfect except there is no keyboard at all. I can install a new one by myself, but I need name of the model, can someone help me with this?

  Hi Ias,

  Welcome to Lenovo Community!

  According to the request, we understand that you are looking for a keyboard for your laptop Lenovo G500s.

  You ask this model supports keyboards sunrex both chicony.

  Click here to see the part number and choose the language of the keyboard as a result. Please refer to the page number 91 for part numbers.

  I hope this helps. Post back if the problem persists!

  Best regards

  Ashwin.S