Models not updated in all pages

Similar Questions

• Download the menu spry to auto update on all pages

  I have read and searched for this "set-up menu spry to auto update on all pages" I want to know if I change the menu for example on the index page it can automatically then updaet the other 50 pages? Someone know how to do, what is it called, or where I can get a tutorial. Thank you

  First of all, this forum is for MEASURE not Spry. If you use the uninstall then have you considered using an include on each of your 50 pages file? In this way, only you just maintain a single file.

  If you do not MEASURE, and you have a static menu on all pages you need to edit, use ADSI-> find and replace.

  If you have any questions of deep techo spry code, it would be best to ask your question on the Spry forum.

  Hope that helps.

• models not updated

  Hello
  
  I recently bought a laptop and it's use in tandem with my office (depending on where in the House I must be!). I have a network set up file sharing to allow me to access the files on the system. My problem is that when I made the changes in a model .dwt file it did not update all other pages that use this model. Have left me now with a few images very skewiff which are locked by the model. Any suggestions?
  
  Thanks as always
  
  Emma

  Thank you Murray - was about to post that I had solved the problem. I forgot to create the site in the new laptop computer has therefore had no root folder pointing to anywhere! Set the site and everything is right with the world of Emmas!

  Thanks again

  Emma

• can not update at all the

  computer crashed and I need to reformat my whole PC and now it's not let me make updates at all can anyone help me please :(

  http://taurarian.MVPs.org/WU_XP/0x80240036_0x8024400A.html

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• Master page with rollover menu, using States, does not work for all pages?

  Hello.

  I created my masterpage with a basic at the top menu. It has two States. The 1st State is normal and State 2 is a simple rollover behavior, just a different color.

  Why my menu would work perfectly on the page ' 01', but then the reversal function does not work for other pages? (portfolio 03 etc.). She has just the hoverover slider and the link, but the color does not change.

  I have something wrong?

  Thanks a lot for all the help on these forums

  Make sure that all the subpages have a second State added to them. You

  do not put any content on this State, but it must be present

  the transfer of work from the watch page.

  If you do not already have that second State, trying to link then cancelled

  the subpages of the master page. I came across this scenario recently

  because I had created a master page after some of my subpages have been

  already built.

  HTH

  Jim Babbage

• Model not linked to other pages

  Hello

  Our school just upgraded our computers OS to Windows 7. I downloaded the remote server site and the .dwt file is pleased to related pages. So, updates I do will have to be applied manually. Does anyone have any suggestions on how I can fix this?

  Thank you!

  If you have the model file and it is not recognized, resave the file as a template and re - apply to pages.  DW will save the model contained in your site and you can work from the model as you did before.  DW will probably ask allows you to map the boxes for reference but if they have the same name, it should not be difficult to work through.

• Share albums not updated on all devices

  Using MacBook Air with OS X Yosemite version 10.10.5 & iPhone 6s.  Have several photo albums shared on iCloud, created using Photos on the laptop.  Recently, photos added by me on my laptop do not appear in the album shared on this same device, but do not appear on the phone.  Other users are able to view the photos.  This album has about 1000 photos.  I tried to create a new album shared on the laptop and it appears as an album empty on the phone, are not at all on the laptop.  Any suggestions to get these devices to sync, so I can see the pictures on both devices?  I prefer to use my laptop for all updates & edition.  Thank you.

  Try resetting the albums shared on your laptop.

  • Photos of quit smoking.
  • Disable the system preferences > iCloud > Photos: Options: iCloud, photo sharing
  • Restart your mac
  • Select system preferences > iCloud > Photos: Options: Photo Sharing iCloud and allow iCloud, pictures photo sharing > Preferences > iCloud.

  Shared albums should reappear, but this may take several days for them to fill in again.

• Problem with not to print all pages in a document with a HP Photosmart 7520

  I have a HP Photosmart 7520 networked printer.  If I try to print a document of medium to large sized (25 pages), it prints the first 20 without problem, but the remaining pages are incomprehensible and illegible. Initially, because it appeared that the problem was caused triny to print in the background with the closed document, so I tried to print the entire document with it open along the.  This no longer works.

  Hello CRC8591, I hope you are well

  I understand that you have a problem with printing a 25-page document that the last 5 pages are so do not print correctly and show to be unreadable. I want to help you with this question, the best that I can!

  I have a few questions to familiarize yourself a little more with the question and I have also some suggestions to start with.

  1. what operating system do you use?

  Operating system Windows am I running?
  Mac OS X: how to find which Mac OS X Version is on my computer?

  2. try to print the document of several pages of another program. It prints successfully elsewhere?

  3. the same problem occurs when you copy or scan multipage documents?

  Try:

   

  1. reset of the printer and leave unplugged for at least a minute.

  Plug the printer directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help this situation.

  2. check if the printer needs a firmware update: get the latest Firmware and updates

  Let me know the results!

  Have a great Tuesday

• The problem with Windows7 updates - don't get do not update at all (since the 14/06/2016)

  I got no automatic updates of Windows7 since 6/14; I went through all the troubleshooting steps provided by Windows/Microsoft, but just not get the problem solved.  I don't know what to do and I am positive, there are of new updates that must be downloaded.  Microsoft blocks updates for Windows7 to force people to switch to Windows 10?  I also use Norton as the security for my computer package. Norton Help Center says there was a major update in mid-June caused problems with the center of Action of Windows, but this problem has been resolved.  What can I possibly do to get this problem resolved?  I am VERY frustrated.

  Previous versions of the Windows Update client cannot properly manage updates. Install the latest version, included in KB3161608.

  https://support.Microsoft.com/en-us/KB/3161608

  Set never 'Find updates' automatic updates and restart before installing.

  Best regards, VZ

• Why are the breakpoints and the page from the master page settings not inherited by all pages?

  Hello

  I've been busy creating a sensitive site with points to stop and a fluid width. Everything works now on my master page. But I found my breakpoints and the parameters of the page were not inherited from my master page for all other pages. To manually create all exactly the same breakpoints would be a lot of work. Can someone help me with the please my problem?

  Kind regards

  Tim

  When you apply a master page with breakpoints to another page, the breakpoints are displayed as markers of white triangle. All you need to do is add your breakpoints in the same place as markers.

  The reasoning behind this is likely that sometimes the content of the page should be changed more than the constant elements in the master.

  I hope this helps.

  David

  Creative muse

• All the Favorites are gone. Can not favorite of all pages (no job options) I re-installed, do of course unalterable offshore on places.sqlite, I tried SafeMode - zero

  When I started firefox, all bookmarks were missing. I tried every single tip on all the possible forums, nothing works. I tried:
  -uninstalling and reinstalling
  -make sure that read-only is not on the places.sqlite files
  -delete the places.sqlite and even localstore.rdf.
  -tried in safe mode (firefox safe mode window doesn't even come to the top)
  -troubleshooted
  -Reset firefox

  Absolutely nothing works and all I want is to be able to score again. I don't even like that I lost all of my other favorites, I just want to mark my new links!

  Help, please!

  Aliya

  Move the places.sqlite to another location (no copy) and restore bookmarks from a backup.

  1. Use one of the following methods to open the bookmarks library window:
     • Click the Firefox button to open the menu and click on bookmarks.
     • Click on the menu of bookmarks and click show all bookmarks.
  2. At the top of the library window, click on the "Import and backup" menu and select restore.
  3. Click on the date of the backup of bookmarks you want to recover.
  4. In the new window that appears, click OK.
  5. Your bookmarks in the selected date should now be restored.

  For more information, see the article restore bookmarks from a backup or move them to another computer . For alternatives, see the article of recover lost or missing bookmarks .

• Dictionary of synonyms not updated on all servers by using workbench

  When I update the thesaurus using the Workbench, only 2 / 3 of our servers updated. I checked the AppConfig.xml and 3 servers are configured in the cluster Dgraph.
  
  I found this error in the shell connects to the server that could not be updated:
  / bin/sh: emgr_update: command not found
  
  What is related to this issue? Is there other newspapers, that I should check for this?

  In the error message, I think that the ENDECA_ROOT environment variable is not set to the MDEX server in question. The emgr_update utility is located inside of $ENDECA_ROOT\bin (or %ENDECA_ROOT%\bin on Windows) so it seems logical with your error message. You should be able to fix, export it and re-run. Note that you will want to set this environment variable "persistent" by placing orders in init.d or something similar, depending on how your organization manages your Linux servers.

  Also, I agree with Frank, this really should be in the other forum as I imagine others will continue in this problem from time to time. If it works, please "cross-post" it.

• TextArea FontSize not updated of all the texts

  Hey guys,.

  I'm trying to set the size of the font of some of the text box after the user selects the size of the text they want. However, this is changing only the last line of the text box (and all the new lines after than those who entered) instead of the whole text. These TextAreas hold chat messages and are not editable. Here is what I tried first:

  public void setFontSize(size:Number):void
  {

  chatLog.setStyle ("fontSize", size);

  }

  and then I tried this:

  public void setFontSize(size:Number):void
  {

  If (chatLog.text.length > 0) {}

  var allText:TextRange = new TextRange (conversation, false, 0, chatLog.text.length - 1);

  allText.fontSize = size;

  }

  chatLog.setStyle ("fontSize", size);

  }

  None of them seemed to change the size of the font of all but the last line. The example that I found online and on the adobe website have both shown it works. I use the htmlText property to set the text. Any ideas?

  Thank you

  Philippe

  OK, took a quick glance.  Interal of the TextArea TextField handling HTML is certainly full of features, I think that you have reached another of them.  It takes all your tags by specifying the size.

  If I were you, read back the html code and replace font tags, or (and maybe it's a better solution for the cat anyway) regenerate the HTML based on an external log of stored channels.  You can find out later that, after a long chat session which, as the number of lines in a TextArea, gets really big (1000), it starts to pig, so you can virtualize this text is actually in the TextArea and handful of scrolling in a different way.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Firefox does not go to all pages

  I went to work today and when I opened Firefox my homepage came to the fine.

  Now, whenever I type a website in html bar I get this.

  A record of the AUP

  Cable Acceptable Use Policy/equipment agreement

  In order to complete the registration a process cable and access your new Internet connection high speed, you must accept the cable one Acceptable use policy, and if you have rented a cable material, approval of equipment one cable. If please read the information below and click the button OK to complete your registration.

  Cable's Acceptable usage policy
  Internet Access Service CableOne.Net high speed
  Acceptable use policy

  Last modified: August 2013

  With a blue box with the recognition to the key word.

  I called Cableone, and they say that is not at an end.

  Nobody knows what he does and how get rid of?

  Avast 2015 first Malware bytes and Spybot find no problems with my computer.

  I scanned my computer with Spybot and it seems to have fixed everything that was the problem. Thanks for the help!

• OfficeJet Pro 8600 not to print all Pages of multi-page jobs

  
  

  Problem solved: remove the printer and reinstall seem to have done the trick.

  This is very useful information on the surge protectors.

  Thank you