module __specified is not found

Similar Questions

• BlackBerry Smartphones module manages 2126 not found

  Hello

  I downloaded the Blackberry World update on my Curve 8900.

  When I try to start it, I get the following message:

  handle to the module not found 2126

  Your help would be much appreciated. Thank you very much.

  Boyar

  Do a hard reset first (remove the battery and sim, replace after 1 to 3 minutes)

  Then try to access the BlackBerry World again.

  Good luck!
  ___________________________________
  Click 'Like' If you want to thank someone. If the problem is resolved to accept it as a 'Solution', so that others can use it.

• RUNDLL error, Module CT3298573 is not found.

  Original title: rundll

  CT3298573 module is not found.

  C/ProgramFiles(x86) /Conduit/ CT3298573/plugins/TBVerifier.dll.

  CT3298573 module is not found.

  C/ProgramFiles(x86) /Conduit/ CT3298573/plugins/TBVerifier.dll.

  If there is everything about TBVerifier.dll. to start system tray disable it...
  http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-Windows/

  or

  You can use regedit... Press windows R, type regedit and click ok... (before you edit it, export the key you are going to change or remove)
  then navigate to these paths... Delete the TBVerifier.dll key.

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/RUNDLL-error-loading/e19e838d-ae3d-49A0-8c4f-2123f341ecba

• There was a problem starting c:\PROGRA~3\kodak\easysharesetup\$Regis~1\registration_8.3.30.1.SXT Module specified was not found - error starting error message

  Original title: specified Module could not be found - error message

  I removed the Kodak Gallery program, but since then, at startup, I get an error message:

  There was a problem starting C:\PROGRA~3\Kodak\EasyShareSetUp\$REGIS~1\Registration_8.3.30.1.sxt

  The specified module could not be found.

  This only happens if my laptop is plugged - if I use it on battery, there no error message. Please can someone help?

  Try this program. It's good enough to get rid of leftover pieces of programs.

  http://www.revouninstaller.com/

  If this does not help, you can always watch this program for exactly what is running at startup and disable the offending application.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• How to solve ' error AppName from: Module "AppName-6"not found "?

  How to solve this error.  I was reading a lot of topic, but it will help you to "Blackberry JDE". But I use 'Eclipse plug-in. "
  Please help me.

  My device: 9700
  OS: 5.0

  Respect of

  I presume that you load on the device using a jad.  Delete the jad and rebuild your project and make sure that the line which refers to this cod is always present.  If this is so when you put your cod upward on the web site, make sure that you unzip to extract the cod of the siblings and to ensure that this cod.

  For more information, search the forum for references to brother cod files.

• "C:\Program Data\Dpis_isv64.dll specified Module is not found" error message when starting

  Original title: problem starting C:\Program Data\Dpis_isv64.dll Module specified is not found

  This happens at the office during the start-up of the pc...

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if it helps.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope this information helps.

• tbupdater.dll not found

  I run windows 7 and suddenly, I get the message "C:\Program Files (x 86) \Browser Updater\TBUpdater.dll the module specified was not found.". What happens in normal mode, the system does not have to work. I now can not enter in safe mode, but can not solve the problem. I tried Fixer of Dll files, but still nothing happens. Help, please. Thanks in advance!

  You must use AdwCleaner. Tested! Problem solved! Here Direct link.

  Access Task Scheduler and search for "browser Updater' in the left pane.

  Select this entry in the library, then right click to disable or remove.

  P.S. To check the guilty, go to the Actions tab and inspect the details.

  i.e. "C:\Windows\system32\rundll32.exe" "C:\Program Files (x86)\HomeTab\TBUpdater.dll", TBCheckForUpdate

• Satellite A105-S2051: common Module not found. This configuration will be terminated

  Hello

  I installed Windows XP but when I try to install any utility (like the Hotkey Utility) I get the message:

  TOSHIBA common Module not found. This configuration will be terminated.

  I can't find the "Toshiba ACPI common Modules for Windows XP" on the Toshiba web site. I tried the web site in English,

  I tried every single link in the support for the Satellite A105-S2051 page.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There is nothing like the Module 'common '.

  I have lived a great incredible waste of time while searching for the reader.

  So please, any help would be welcome.

  Hello

  I found Toshiba ACPI common Modules for Windows XP (Toshiba value-added Logic Device) in some different sets of Satellite A105.

  For example: A105-S271 A105-S2711 A105-S361 A105-S3611, A105-S2719, A105-S2712, A105-S2713, A105-S2716, A105-S2717

  Go for no apparent reason the A105-S2051 is not there.

  However, try the Toshiba ACPI common Modules of different A105.

  Maybe the latter won't work.

• Satellite L300 - 11L - TOSHIBA common module not found

  Hello
  I have a model Satellite L300 - 11L
  I try to install the operating system XP drivers
  Hotkey utilities for display devices
  I have an error pops up: "TOSHIBA common module not found!" This configuration will end. "

  I ask you to help and support.
  Thank you

  Hello

  I think the error message is quite clear.
  Common modules driver is not installed and so you cannot install the Hotkey utility.

  The common Modules is a crucial driver to be installed at the beginning!

  Therefore, you should visit the European driver of Toshiba. Need to select your model laptop and download this common Modules.
  Install it and then repeat the installation of the Hotkey utility.

  See you soon

• module not found wireless (701)

  Please, help me to solve this problem.
  After that I did the diagnostic system, I get message "wireless module not found (701).
  and when starting my laptop, the screen just showed HP logo and start back to the HP logo.

  Hello

  Please try this.

  Disconnect the power sector and battery that no accessories must be connected to your laptop. Then press and hold the power button on your device for 15 to 30 seconds then plug the battery & power checking if the unit works fine.

  If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

• nilsdev - nimdbgk Module not found

  Hello

  I just installed a PCI-6509 and NOR-DAQmx 8.0.2 on SUSE Linux. I intend to use the ANSI-C drivers in a C++ application. I have not installed LabVIEW.

  I started working my way the Configuration Guide, mainly to check that I had installed everything correctly and have reached the point where nilsdev is executed. On the surface, everything seems to install OK.

  When I run nilsdev I get the following error:

  FATAL: Module not found nimdbgk.

  Is how important it?

  Of course, it does not nimdbgk, but it doesn't look like it has been installed.

  In usr lsmod | grep or returns

  nipalk

  Nation

  lspci is the map of NOR (but he seems to have the wrong number on, not sure if it is a problem)

  05:01.0 class ff00: National Instruments devices 7085.

  Part of LabView nimdbgk is why I don't have it?

  All you have ideas?

  Thank you.

  Hello

  I am not that kind of information officially, but I would speculate that it would be in version 8.9.

  «NOR-DAQmx added support for 64-bit user mode in NOR-DAQmx 8.9 (ANSI C) and NOR-DAQmx 8.9.5 (ANSI C, LabVIEW 2009 and .NET Framework 3.5).» This now allows the development of 64-bit application on 64-bit operating systems during development for a 64 bit (ADE) Application development environment. »

  The outputs by the trend that has occurred with Windows basic drivers, what would be my best guess.

  There are a few forum posts that indicate that people have had DAQmx working on x 64 systems, but with the extension of the - m32 for compilations, this isn't really 64 bit.  Unfortunately, the positions are open and do not contain really any resolution as such.

  For example this or that.  I just searched "DAQmx Linux 64-bit".

  I hope it helps a bit.  I'm sorry that I don't have a definitive answer.

  Kind regards

• module ivuxoqoya.dll is not found

  On startup, I get this error message with a "appdata".  I cleaned my disk and it still appears and a drive next to my pointer just keeps turning.  The full message is the module ivuxoqoya.dll is not found

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Post your question in the forum Windows here: http://answers.microsoft.com/en-us/windows/forum

  It sounds like malware to me.  This module is not part of what Google can locate.

• I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  Hello

  you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

  check the reports on the problems and solutions

  You can do a support ticket, follow the link

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

  Microsoft product support has some tools that will be useful and can help to find a solution

  have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads

• Specified module not found: UNICOWS. DLL

  Cannot connect on MSN out of the blue. Error message "" specified module not found: UNICOWS. "." DLL.

  (2) MS technicians were not able to solve the problemm?

  Hello

  Remember to make changes to the computer before the show?

  You can uninstall MSN Messenger and download again.  This will help you solve the
  problem.

  How to change or remove a program in Windows XP
  http://support.Microsoft.com/kb/307895

  To reinstall MSN Messenger, follow this link:
  http://Windows.Microsoft.com/en-us/Messenger/home

  If this does not help, you can look after your query using MSN.
  https://support.MSN.com/contactus.aspx

  http://Messenger.MSN.co.in/help/