monitor flickers, after having turned it on, have to turn off and on several times to make it work

Similar Questions

• Screen remains black/stop after having turned off to save energy.

  I have this problem on two different Porteges with
  Windows 98 Second edition.

  They are then handed achieved both and all drivers are
  as noted on the internett. And windows 98 is
  Standard CD (not the CD from Toshiba). Both have the latest version of the BIOS.

  Everything works fine, it's the only
  problem.

  In Control Panel-> display->... you can specify
  settings/energy savings. I think I turn off screen
  After 2 minutes and turn off hard drive 5 minutes.

  It works very well. The screen goes black, then I
  can relight it by moving the pointer ('mouse').

  But if I leave it for a long time and get to him,
  then the screen stays black. (This is the problem).

  But everything still works fine! ... and
  I can do a controlled stop by pressing ctrl-alt-del
  ALT - s, while the screen is black.

  Any ideas anyone?

  Hello

  Portege models do you have? Because as you have explained, you use the power management MS which isn't one that fits!

  You can watch http://eu.computers.toshiba-europe.com - Driver Downloads If the Toshiba Power Saver is available for your units and W98!

  It may be that old W98 Powermanagement has problems with the complex of the portege series material is available on the Toshiba site standby power!

  Good luck
  Rudi

• Stay of connector on cable network after having turned off the Satellite Pro A120

  Hello

  The green light from the connector of the network cable to the back of the laptop turned on when the laptop is turned off (no cable is connected).
  It doesn't matter if it's on battery or power. And when it is turned on, the light goes out.

  Any idea?

  Thank you

  KAV

  Hello!

  Is in the BIOS wake up on LAN enabled? Try turning it off.

  In addition an update of the BIOS if you n t to have the latest version.

  Good bye

• Data on passports blackBerry won't turn on again after having turned off Wifi

  Hello

  When I turn off my Wifi, my passport is not connect to the data.  I need to turn off the mobile network and restart to get the data again. It happens 100% of the time.

  Reflections on the patches?

  See also:

  supportforums.BlackBerry.com/T5/BlackBerry-Passport/Calendar-Time-Zone-issue-Again/TD-p/3031616

  It's 2 problems with my passport.  My patience to the test.  Although to be honest, my Z10 in February 2013 was a disastrous wreck of a phone - I can't believe delt with that nonesense for almost 2 years.  The Passport is a bargain compared to this, but still these 2 questions upset me a lot.

  Your help would be great.

  David

  That's what I want to do, live with it, maybe try an OS reinstall on a rainy weekend just to know if it is or not.

• When I log on my monitor only stays on for a few seconds and then goes black. need to turn the screen off and on several times before it lights.

  fact it for about a week now.  have ran antivirus scans and asked a lot of people who were not able to help me at the moment.

  It looks like a hardware problem.  Your monitor, cable or even the video card in your computer goes wrong.  My bet is on the screen.  Try to swap the monitor with another computer and see if the problem follows the monitor or the computer.

  HTH,
  JW

• HP Photosmart premium c310, Windows 7 (64 bit) series will not work afterit is turned off and then on again

  I have photosmart all-in-one c310 printer and whenever we have a power outage, the printer will not print at startup power upward. I have spend hours trying to download drivers or updates and check the printer that says it's fine and the computer that says it can't find the driver. The last 2 times I finally got running again, but I did something different every time and I don't remember what it was. I just spent 2 hours on a hamster wheel keeps back me for a download, after you download it twice, I finally understood was the SAME download (the 3rd time I was directed here) and the printer STILL does not work. I'm pulling my hair out and I'm about to throw this worthless piece of scrap metal by the window. Help!

  Are you connected wireless? If so, you will need to reconnect the printer to the network of the SCW wireless on the printer itself. When you have power, he can hit just the printer off of the network from the router and just reconnect.

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• I get the message "iPhone is disabled try again in 24,145,404 minutes after having turned it on."

  I get the message "iPhone is disabled try again in 24,145,404 minutes after having turned it on."

  Anyone know what this means?

  Which sometimes occurs after successfully entering the access code to many times. See this support article for help. -AJ

• I apologize in advance if this isn't the right forum, but I need to do a reformat on this computer.  My question is, after you turn off the CC, PS, LR and bridge I have to uninstall as well?

  I apologize in advance if this isn't the right forum, but I need to do a reformat on this computer.  My question is, after you turn off the CC, PS, LR and bridge I have to uninstall as well?

  If you want to reformat the hard disk, in erasing all data on the computer, there is no need to uninstall.  Deactivation is sufficient.

• Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

  Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

  Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

  Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

  Now, I can't turn off the monitor, except by turning off the computer.

  Hi JDandGinger,

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  If the problem still persists contact the manufacturer of the monitor for more help and information.

• Qosmio X 505-870-can't turn off and nothing on the monitor

  I wasn't doing anything particularly interesting when my computer just turns off randomly. I pressed the power button to turn it back on, I can hear the fan and things of the machine but nothing appears on the monitor. I pressed on and maintained the power button to turn it off and try again, it does not turn off. He is stuck with the computer on but a blank screen.

  Don't know what to do, I can't turn off, and he's not doing anything.
  Could try to put the recovery disks to see if it's nothing, but I'm worried about the files I have saved on the desktop (stupidly)

  Hi colhyena,

  I agree with Akuma. The same instructions posted by Akuma I found here:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  So that s what you can do and if it s does not you need professional help of an authorized service provider.

  Qosmio X 505 is newer model laptop so probably yours is still under warranty. In this case, the repair is free and you don t have to pay anything. :)

• Cannot get on my computer after you turn off FileVault

  I can't get on my computer after you turn off FileVault. After reboot, he asked my name and my password. It didn't work and now I'm stuck at the connection. What should I do? The computer is new and I had nothing recorded on it.

  Reboot into recovery (command-R) Mode. Then use disk utility to ERASE the drive. Select the top reader of the page entry and select Delete. This will erase, reformat, and create a single partition. Close disk utility, then select reinstall OS X OS X Utilities menu.

• Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first go-ahead for colid quickly followed by the longest fixed Orange, which turns off and then nothing? He's dead now?

  Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first green light solid, quickly followed by amber is more solid, which turns off and then nothing? I'm not in the airport or if directly connected to the Macbook air utility. It is running the latest firmware, updated 7 days ago and everything was fine until now. Tried both a soft and a hard reset factory but still nothing, but the same brief glow only after restarting each time before going dark again? Any ideas if it can be fixed or if it's as I read elsewhere dead now?

  Thank you

  Any ideas if it can be fixed or if it's as I read elsewhere dead now?

  He died... the fact that the main witness turns off is unusual in this model.

  It is common to the next... A1409 (gen4)

  What happens in the Gen3 is normally a few deaths on the Board... or a bunch of capacitors is low...

  See s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  If yours is a very fine introduces Gen3 just before Gen 4, it is possible that the same fix on the Gen 4 could work.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  I found early Gen4 may fail as Gen3 but must admit that I am yet to see the Gen3 with welding problems.

  I doubt repair is worth it. The Gen3 is now about 6 years... give or take... This is way beyond the standard lifetime of a TC.

  If you want to play, I'm happy to help you... but I would not spend money on it.

• I am unable to unsubscribe from communities of APPLE. mailbox had 3-4 pages of comments. Have everuthing turned off and saved the changes... Help

  I am unable to unsubscribe from communities of APPLE. Mailbox has 3-4 pages of comments by email. Have everything turned off and saved the changes... Help

  , You click on "stop following" in each community/thread you posted in?

• WiFi turns off and have to constantly reboot

  WiFi turns off and have to reboot to recover.

  1. Windows version?

  2 mac model/year?

  3 driver Version?

  4 OS X work?

  5 Ethernet?