monitor the iMac 27 grips 2011 TR spegne meta

Similar Questions

• using the iMac 27 inch mid 2011 as an external monitor with a PC via mini DisplayPort

  I find conflicting information via web search to be able to use my iMac 27 inches, mid-2011 as an external monitor with a PC. Is it possible to use the iMac as an external display via the Display Mode target between Thunderbolt port of the iMac with a PC equipped with a mini DisplayPort?

  Of course, I hear it's possible with the appropriate cable. But if it is not possible, I would like to know for sure.

  Thanks in advance for your help with this. _henry

  Target display mode is Mac to Mac only. Use your iMac as a display with the target - Apple Support Display Mode

• I have an IMAC of mid-2011.  Can I connect a Mac mini to this iMac 2011 and use this monitor that has a built in processor?

  I have an IMAC of mid-2011.  Can I connect a Mac mini to this iMac 2011 and use this monitor that has a built in processor?

  You should be able to, given the Mac Mini has the correct connections (in this case, a Thunderbolt connection).

  Use your iMac as a display with the target - Apple Support Display Mode

• Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)

  Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)?  I contemplate moving to Sierra, but not if it comes into conflict with Logic Pro.  Can someone advise?

  Thank you!

  Matt

  It was reported a number of not being able to save or to new projects with the title of the Sierra.

  I would conclude some time if I were you, especially if everything is working well at the moment.

• I can connect new iMAC (A1418) on my Win10 to use the iMAC monitor?

  Can I connect my new iMAC (A1418) to my Win10 so the Win10 can use the iMAC monitor?

  Read the article to use your iMac as a display with the target - Apple Support Display Mode Apple. Apple described the iMacs will work. You will probably find that you get an external display to work with your Windows machine.

• iMac 27 "mid-2011 hard drive failed, fan to full after the removal of HARD drive

  iMac (27 inch, mid 2011)

  2.7 Ghz i5

  12 GB of RAM

  I have a fault where the HARD drive fan runs at max speed (RPM 5431, 51 * C temp).

  The first symptom was a rattling noise from the factory 1 TB HARD drive, which has disappeared from the system, to be replaced by a disk of 4 GB in size. Then the fan started running at max speed.

  A few months ago, I installed a 2nd drive HARD, an SSD and use this to all the data, so the 1 TB drive HARD original was basically unused and empty. To try and stop the fan and also run the disk diagnostics failed I've removed it from the iMac. However the HARD drive fan is always full.

  I ran the Apple Hardware Test and received the error message: 4SNS/1/40000000: TH00 - 9,000

  Given the primary SATA HDD is now removed, I also set the temperature probe? Are there other fixes to this problem of fan? I didn't intend on replacing the HARD disk immediately that this is not necessary at this stage.

  Thank you!

  Shaun

  shaun02 wrote:

  I ran the Apple Hardware Test and received the error message: 4SNS/1/40000000: TH00 - 9,000

  Given the primary SATA HDD is now removed, I also set the temperature probe? Are there other fixes to this problem of fan? I didn't intend on replacing the HARD disk immediately that this is not necessary at this stage.

  Yes, take a look on > acs http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im

• Update the iMac MID 2011 to work in FCPX with 4K

  Hi all

  I think to upgrade my iMac like mine is a MID 2011 but research on the Apple site, I don't think OMG that tilt for £2800!  My current system is an i7 3.4 GHz with 12 GB 1333 MHz RAM and AMD R HD6970M 2048 MB.
  I also installed an SSD as boot drive a few years so he tried there to justify going to the iMAC for 5K.

  Do you think I'll get a decent performance gain in FCPX edition 4K since the new iMAC
  4.0 GHz quad-core Intel Core i7, Turbo Boost up to 4.2 GHz
  32GB 1867 MHz DDR3
  2 TB disk Fusion
  AMD Radeon R9 M395X with 4 GB of video memory

  Thank you very much

  Lee

  ID to avoid the car of Fusion. Rather get a smaller SSD and use an external RAID Thunderbolt.

• update the iMac mid-2011 or buy a new one.

  Hi guys,.

  I have an iMac 21.5 "mid 2011 with 12 Gb RAM. I was wondering if it was a good idea to override this model (installation of an SSD, etc.) or buying a new iMac.

  I am not very happy with RAM soldered to the logic board of the new models 21.5 ". Load path Apple extra RAM too. Most users may not upgrade RAM or change SSDS by themselves, but, I'm a small part of those who like to modify and update my Mac, I like to do and not be restricted by a marketing strategy.

  However, what do you think?

  Looking at the price of new iMacs, I would setup an SSD and more RAM if your iMac runs correctly. You will save money, and this computer will last you a few years without glitches.

  However, if you feel that your iMac is not powerful enough for the tasks you do, go for a new iMac. As you say, Apple does not allow you to change anything (except installation RAM on iMac 27 inches), so buy the iMac with the amount of RAM and disk that meet your needs.

• Where are them have ways to use the iMac (end of 2015) as a monitor

  Hi all

  Where are have ways to use the iMac (end of 2015) as a monitor?
  Or maybe I can throw the bones of my macbook on iMac?

  You can not. It does not target Display Mode support.

  Use your iMac as a display with the target - Apple Support Display Mode

• What is the maximum RAM for iMac 21 "mid 2011?

  Hello

  According to the specifications of apple, there are 16 GB.

  According to MacTracker: Maximum memory: 32 (real) 16 GB (apple)

  What does that mean?

  When Apple released the iMac 21 inches mid 2011, Apple has tested the iMac with only 16 GB installed.

  It is possible to increase the RAM up to 32 GB.

  http://eShop.MacSales.com/shop/memory/iMac/2011/DDR3_21.5_27

• Use the iMac with bootcamp as a monitor

  Dear community,

  Currently, I use my windows desktop pc, and I would use my iMac (24 inch end 2010) as a second monitor. The iMac runs on bootcamp and the apple partition is unfortunately broken. This means that I can only use windows on my iMac. Now, I want to use the iMac as my second monitor. Should what cable I buy to make it work? And how do I use target mode on windows (can not enter my Mac partition...)? I'm a little worried about buying bad cables. If anyone knows how to solve this problem, I would greatly appreciate your help!

  Sorry for my English, if you don't understand something just ask me.

  Kind regards

  Antonie Muijtjens

  No, see > use your iMac as a display with the target - Apple Support Display Mode

  

  

• How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor

  Hello

  How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor?

  Are there any adapter or cable that can help?

  Concerning

  M

  PCs have no support for the target Display Mode.

• Connect the Middle 2010 21.5 "iMac for mid 2011 21.5" iMac in target display mode

  Hello

  I looked for an answer to my question and I'm not 100% clear, so I ask your help please.

  I have an iMac 21.5 "2010 middle which I want to connect to an iMac 21.5" 2011 mid (which I think the purchase) in order to have two screens. I know it can be done with these two models but the iMac 2010 has a Mini Displayport connector and the 2011 has a Thunderbolt connection, so I don't know if it's possible. I don't mind which screen is the main.

  Any help is appreciated

  Thank you

  In fact, it can be done from the mid 2010 21.5 "iMac doesn't have a Thunderbolt port. See the information in use your iMac as a display with the target - Apple Support Display Mode

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• IMac 27 "mid-2011 as a destination display

  Is it possible to use an Imac 27 "mid-2011 as a destination with a PC as a source?

  A direct connection, no.

  The only solution is through Microsoft Remote Desktop Mac over a network

  or another form of VPN.