monitor turns off for no apparent reason

Similar Questions

• Satellite 1900-303 turns off for no apparent reason

  I got my Satellite 1900 303 for about 2 years and no problem. In the last month, I had a problem with him turn off his car suddenly and for no apparent reason. I checked virus and have found no virus. Can anyone suggest why I did this. I was wondering is that he has been making overheated?

  Thank you

  Hello

  Believe me, there is always a reason why this happens. From your description, I assume that your unit is overheating. If the temperature is too high the unit simply stops.

  You need to clean the device. After that cleaning the unit should work properly again.

• computer turns off for no apparent reason. It's all a few minutes using Windows Vista Home Premium SP 2

  Every few minutes the computer turns off. No warning, nothing. It will restart ok, but stops then off again in a bit.

  I can be in the workplace, and it will cut offf.

  I'm usting Vista Home Premium SP2 version.

  Any Suggestions?

  Hello

  1 did you changes to the configuration of the system before the show?
  2. you receive an error message/code when the computer shuts down?
  3 does the computer automatically restart once it stops?
  Event Viewer
  
   
  You can check the event viewer to discover events that could cause this problem.
  See the link below to open the event viewer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  For more information on what information appears in Event Viewer, see the link below:
  Disable automatic reboot manually.
  1. Right click on computer
  2. Properties
  3. Advanced system settings
  4. Startup and recovery
  5. Uncheck automatically restart.
  Resolution:
   
  Step 1:
   
  Safe mode
   
  Start the computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Step 2:
  Clean boot
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
   
   
   

• How can I restart a mouse that has turned off for no apparent reason?

  I turned on my PC and the mouse would not work. The light was on, but I changed to a new battery just in case. It still does not work. It was fine yesterday and nothing seems to have happened to my other PC other than the fault of the mouse. I can't find answers on the PC

  Stan PLZ HELP AN OLD DUFFER

  As you have replaced the batteries, I suspect that your use of a wireless mouse. Have you tried to unplug the receiver to the USB port (if it is indeed a USB mouse) and reconnect?

  Anthony.

• computer stops at any time for no apparent reason

  My computer turns off for no apparent reason. When I restart it - it will try to load windows and restart again. Sometimes this happens several times in a row. Finally I can get it started. Any suggestions?

  Saturday, January 22, 2011 15:22:39 + 0000, john tomasik wrote:

  My computer turns off for no apparent reason. When I restart it - it will try to load windows and restart again. Sometimes this happens several times in a row. Finally I can get it started. Any suggestions?

  It is almost always a hardware problem, not a a Windows. Both
  the most likely causes are overheating and power problems.

  Ken Blake (MS-MVP)

• Windows 7 double monitors - turn off a monitor causes Office to reorganize resulting in substantial losses of productivity.

  I have 2 monitors connected to a card nVidia FX 580 running Windows 7 Pro 64 bit. A monitor is linked via DVI and the other through DP (Display Port).

  If I turn off the monitor of the RFP, I hear the windows sound indicating the material has been "deleted." When I turn on the monitor, I hear the sound of new hardware, windows re - detects the monitor as if I just installed it and my layout any icon on the desktop and all the windows, I had open are then all rearranged and takes a long time, re-organization to come back to where I was.

  I leave my PC on 24 hours a day for several reasons - and for years have always just had my monitors turned off when you are not using it.

  I need to be able to turn off my monitors without windows deciding that I "removed" a monitor.

  I work for a software company of medical imaging, where we provide the complete hardware and software solutions for use in radiology departments in hospitals. These systems are usually 3 or 4 connected monitors, all via DP these days. Due to the possibility of the desktop users get messed up, if they happen to turn off a monitor, we can not install systems with Windows 7.

  While many may see this as nothing more then a disadvantage, it is a show-stopper as what we concerned. Yet as I have not found a viable solution to this problem.

  So here's the question: how to disable this new behavior in Windows 7 and allow him to understand that the monitor has not gone away and that the Office should not be changed simply because the monitor is off?

  Thank you.

  I wrote a small utility to fix this problem. It is still very thrown together, but Open source, so you can compile sources if you have security problems.

  I hope it works for you!

  http://www.ninjacrab.com/persistent-Windows/

• I have programs that are turned off for me

  I use Windows 7 on one of my computers and some features and some programs are turned off for me for reasons that I seem to have a friend who does little for me these favors and the cancellation of a full recovery lucky, or just buy a new hard drive, formatting, and the original installation of Windows 7 OS, I'm having fun with the challenges of things to know if I can and I will. But can be annoying at the time, someone else has a friend like that...?

  If you do not have an administrator. account, you cannot use windows features.

  If you have an administrator. account, go to Start orb > Control Panel > programs and features > turn on or off windows features > check or uncheck what you want to use or no.

  Also, if you have basic family W7, there are not some features.

• my firefox crashes for no apparent reason

  my firefox crashes for no apparent reason
  the crash report says:
  EMPTY: no thread crash has been identified; dump corrupted
  the report of the accident itself
  http://crash-stats.Mozilla.com/report/index/BP-715dc850-c4c1-42ee-ACD9-d8ba12120903

  Could you try disabling graphics hardware acceleration to Firefox? Due to the recent driver updates, many users know strange stability and performance problems related to this function.

  You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  If you restart Firefox, the issue is resolved or at least improved?

• Satellite P750 - touch buttons have been activated for no apparent reason

  Heya

  My Toshiba P750 / 02L 001 seems to have this weird problem where the tactile buttons that activate the volume control / green mode / wifi switch / etc... have been activated for no apparent reason

  My hands are no where near close, and does so only after a certain time

  Any idea on what this might be?

  I'm under the Win 7 Home Prem predefined provided with the laptop edition

  Looks like the switch Board is defective. I would like to send the laptop to a Toshiba repair center. There is a list of ASP on the Toshiba site.

• fan speeds no office of reason for no apparent reason of fan speeds

  HP Desktop fan accelerates for no apparent reason

  Salvation of the elbow,

  Try this procedure:

  Disconnect the PC and open it. Clean all the dust. Carefully, remove and replace all the cables towards the mother board one at a time. Do the same for memory DIMM and the video and the sound of cards if you have a.  You can buy a can of compressed air to blow the dust out of the heatsink from the CPU.  Plug your PC back in and give it a go.

  If your PC is not current running bios level 5.22 try then upgrade to the latest bios level.  If you are already running 5.22 then try clear the CMOS.

  You can try removing the heat sink aluminum end shown in the picture of the motherboard (lower right corner), remove the old thermal paste with little of isopropyl alcohol and then apply a thermal paste Artic Silver 5 and reattach the heat sink.

• How can I fix the "drag and drop" feature in Windows 7? It used to work, but now does not work, for no apparent reason!

  How can I fix the "drag and drop" feature in Windows 7?  It used to work, but now does not work, for no apparent reason!

  What happens when you try?  Make sure you drag the icon image and not the text of the name.

  If it still doesn't work there are some registry changes that can try to alleviate the problem.  But because the changes to the registry are tedious and dangerous, I recommend to leave the system to repair it for you.  Here's how:
  1. Type of restore in the search box of the start menu to find and open to restore system files and settings from a restore point.
  2. Click Next, choose a date before the problem started, then click Next once more.

  • This process only takes around 2 minutes and only restores your system files/settings: it will not affect any of your files, documents, photos, emails, or anything else.
  If the system restore does not resolve the problem try this to replace missing or corrupted system files.  Here's how:
  1. Type cmd into the start menu search box, and then press Ctrl-Shift-Enter to launch as administrator.
  2. At the command prompt to start the File System Check, type sfc/scannow .

• When I insert a memory card in my PC not using windows 10 I suddenly for no apparent reason get a no found the message of photos. How to solve it?

  When I insert a memory card in my PC not using windows 10 I suddenly for no apparent reason get a no found the message of photos. How to solve it?

  Looks like you have a card reader malfunctioning.

  You can connect the camera to the computer via the USB cable provided with the camera to see if the pictures can be read like that?

• 860 - 009na: the monitor turns off during access to / applications change full screen

  Hello

  I got a new computer packed with the HP Envy 32 inch monitor. I am running on an issue that is simply irrating and I don't know how to solve it.

  Basically, the screen is empty. It is not a hard lock or whatever it is, he decides just during initialization more applications full screen (IE, a game) or even post Win10, connect, when computers are like "flickering" during the swap, the screen just turned off. This can be resolved by switching on the monitor input channel, or put the monitor in standby and distributed. On these occasions, I get sound through the screen.

  So appearances, the screen continues to receive entries from the computer and because of switching the monitor off and on again, it display image as expected. This is a case where the monitor is simply decide that it does not want to display the image for reasons unknown. Such as energy conservation.

  I updated the graphics card, provided I got most up to date display driver, double checked the connection... it just happens.

  It feels like it some really boring affecting somewhere that makes the screen, and I really want to change it. For the moment, it is a rate have to turn on the screen and two times just to get the start menu, then if I insert a game, he does even once, when I leave the game, does it again. It does not occur when a game that supports the windowed mode - without borders is loaded (I guess because it is not 'true full screen').

  Thus, it seems to happen during this process to set full screen.

  Well, there is another cable that I was not in the box titled "DisplayPort".

  So I changed my HDMI cable to use this one. The monitor works perfectly now... so as a workaround, this solved.

  But the question remains, why the monitor was so weird when using HDMI? It might be marked up as a potential problem.

• Monitor turns off after 5 minutes & password protect when he wakes up. View properties - > screen saver "Wait: __minutes" and "on RESUME, Password Protect" checkboxes are grayed out.

  Help, please!

  I'm on a processor to work, so I've limited the administrative rights on the computer. My work function requires that I propose on the desktop to help others with professional assignments.

  THE PROBLEM: After 5 minutes of inactivity mouse/keyboard of the monitor off on the processor to work, she does not even go to a screensaver first, the screen turns off just in standby mode. When the mouse is moved or a key is struck, the screen lights up with a name/password user. I am developing carpal tunnel / repetitive stress syndrome having to retype my username and password so darn times per day, at the expense of some administrative setting of BOGUS Microsoft Windows... SHEESH!

  When I click on Start-> settings-> Control Panel-> display-> Display Properties-> screen saver , the "Wait: __minutes" and "On resume, password protect" checkboxes are GRISEES OUT [you can't edit these settings] . In addition, the default screen saver is set to void and no matter how many times I change it to something else and click 'Apply' return empty by default.

  TWO SERIOUS CONCERNS:

  Un When I'm away from my desk for more than 5 minutes, if someone arrives at my office, looking for me, it seems that my machine is completely off, so that co-workers can get the impression that I am out of the office when I could very well be just down the Hall.

  Two The Office I'm implemented in a motion sensor energy saving lights in the office, if the lighting turns off automatically too, so if I'm missing in the server room or help someone at their work station for an extended period of time, if someone comes to my office, looking for me, my machine seems to be completely off AND turned off the lights in my room , so it's as if I has not yet come to the office that day there! GRR...

  MICROSOFT, HELP US TO FIND a WORKAROUND: Help us make our work computers appear as they are wake / turned on while we are working work - especially when we ARE at work, just not physically sit behind our office temporarily work! GOOD GRIEF...

  Help us not to disturb our admins with specialized personal requests like these, they already have enough on their plate, ensuring that the network is in place and functioning.

  -JUDGES on Temp. Job Day @ assignment
  (Chained to a machine working at the expense of some fake Microsoft Windows administrator rights)

  PS. I have a screenshot of my locked dialog box display-> screen saver properties if you need more information. I wish I could download it right on this post to make things clear.

  PPS. Isn't it above described situation in the heart of the reason why employers more these days this demand we have iPhones, BlackBerry and SmartPhones? Because doctors and human beings humans with a bit of common sense finally realized that we must be sure that we move around during the day, at least several times per day, not only the stationary to our office location - watch a screen - ensuring that move us the mouse every five minutes so that our machine is not hibernate and look like it is not to do anything?

  PPP. If Microsoft can not help me with a work around for this issue because this issue is, 'something that I take with my 'network administrator',' kiss my _______! Everyone must be wrong because of the stupid administrative _ like this and if yes - I NEED TO KNOW - maybe I was just not cut for a job on time full computer.

  PEACE

  Hello JDG_SF, welcome.

  These options are very likely controlled by your GP (Group Policy) settings on your domain. Due to the nature of the work of rights how administrative, there is no way to work around this problem, unless you have access to change group policy settings that affect all the machines on your network.

  You would need to access or to change the settings of GP or find someone who already has access.

  For more information or get in-depth help, I would recommend pass this question to TechNet:
  http://social.technet.Microsoft.com/forums/en/categories/

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internet Explorer opens multiple windows for no apparent reason...

  Internet Explorer opens multiple windows without apparent reason... There is no rhyme or reason why, sometimes just from time to time and not on a specific Web site.  After that a dozen windows open in succession, I hit the power button to turn off.   (Vista OS)

  Almost everyone I have spoken was this glitch.   Someone at - it a fix for this?

  Thank you!

  Lil' Birdie

  Hi Lil' Birdie.

  the behavior persists in No add-on mode?
  See and follow this Blog post from the IE team:
  http://blogs.msdn.com/ie/archive/2006/07/25/678113.aspx
  «Troubleshooting and Internet Explorer (No Add-ons) Mode'.»»
  And/or step 3 here:
  http://support.Microsoft.com/default.aspx/KB/926449/en-us
  "Internet Explorer does not start or stops responding".

  See also...
  http://support.Microsoft.com/kb/936215
  "How to solve the problems of Internet Explorer 7 in Windows Vista".
  http://support.Microsoft.com/kb/936213
  "How to optimize or reset Internet Explorer 7.

  If still no joy...

  1 . Read and carefully follow the:
  "Looking for / help with software, spyware software malware and Hijackware". "

  2. run Microsoft Windows malicious software removal tool

  3. download, install, update and run:

  SUPERAntispyware (freeware) and Malwarebytes' Anti-Malware   (freeware).

  4. run this analysis online (safe mode with network, if possible):
  http://OneCare.live.com/site/en-us/Center/howsafe.htm

  I hope this helps.

  Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/